djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Espressif: do not hold pins during deep sleep if not necessary

Browse Source
This commit is contained in:
Dan Halbert 2022-09-29 20:06:40 -04:00
parent d3449bdabb
commit 9d1b12066d
4 changed files with 14 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
ports/espressif/boards/adafruit_feather_esp32s2_tft/board.c
View File

@ -88,9 +88,6 @@ void board_init(void) {
displayio_display_obj_t *display = &displays[0].display;
display->base.type = &displayio_display_type;
// workaround as board_init() is called before reset_port() in main.c
/// pwmout_reset();
common_hal_displayio_display_construct(
display,
bus,
@ -127,8 +124,8 @@ bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
// Override the I2C/TFT power pin reset to prevent resetting the display.
if (pin_number == 21) {
// Turn on TFT and I2C
gpio_set_direction(21, GPIO_MODE_DEF_OUTPUT);
gpio_set_level(21, true);
gpio_set_direction(pin_number, GPIO_MODE_DEF_OUTPUT);
gpio_set_level(pin_number, true);
return true;
}
return false;

3
ports/espressif/common-hal/alarm/__init__.c
View File

@ -173,9 +173,6 @@ void NORETURN common_hal_alarm_enter_deep_sleep(void) {
// We no longer need to remember the pin preservations, since any pin resets are all done.
clear_pin_preservations();
// Allow pin holds to work during deep sleep.
gpio_deep_sleep_hold_en();
// The ESP-IDF caches the deep sleep settings and applies them before sleep.
// We don't need to worry about resetting them in the interim.
esp_deep_sleep_start();

6
ports/espressif/common-hal/microcontroller/Pin.c
View File

@ -173,6 +173,12 @@ void preserve_pin_number(gpio_num_t pin_number) {
gpio_hold_en(pin_number);
_preserved_pin_mask |= PIN_BIT(pin_number);
}
if (_preserved_pin_mask) {
// Allow pin holds to work during deep sleep. This increases power consumption noticeably
// during deep sleep, so enable holds only if we actually are holding some pins.
// 270uA or so extra current is consumed even with no pins held.
gpio_deep_sleep_hold_en();
}
}
void clear_pin_preservations(void) {

6
shared-bindings/alarm/__init__.c
View File

@ -143,6 +143,12 @@ MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(alarm_light_sleep_until_alarms_obj, 1, MP_OB
//|
//| On some microcontrollers, some pins cannot remain in their original state for hardware reasons.
//|
//| .. note::
//| On Espressif chips, preserving pin settings during deep sleep may consume extra current.
//| On ESP32, this was measured to be 250 uA or more.
//| Consider not preserving pins unless you need to.
//| Measure power consumption carefully both with no pins preserved and with the pins you might want to
//| preserve to achieve the lowest consumption.
//|
//| **If CircuitPython is connected to a host computer via USB or BLE
//| the first time a deep sleep is requested,