9c38f5dcb1
Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator
2020-07-08 16:03:12 -04:00
57ab4f1329
stm: SPI: revamp pin search code
...
I discussed with Hierophect on Discord about how to "de-nest" the code
for configuring SPI objects on STM, because the problems with one
nesting level per pin becomes unmanageable with the up to 10 pins of
SDIO.
This code (which is only compile-tested so far) demonstrates the concept
we discussed.
The SCK pin is always required. Loop over all possibilities of the SCK
pin. When we are considering a particular item in the mcu_spi_sck_list
we have now become committed to using a particular periph_index. If all
the other pins can be satisfied by that periph_index, then we have a
working combination. Once we have a working combination that is not
reserved, we can return that combination. On reaching the end, we have
checked all the possible possibilities and can give the same errors as
before: One if there was a possibility that worked but was reserved;
and another if no possibility worked.
2020-07-07 14:37:50 -05:00
c72e3536f1
Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator
2020-07-03 09:50:05 -04:00
4a21426377
Merge pull request #3103 from hierophect/stm32-simplex-spi-fix
...
STM32: add debug flags, fix hang in simplex SPI
2020-07-02 13:42:08 -07:00
4b66483757
Update submodule, revert direction change
2020-07-02 15:38:37 -04:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
87d58b3b0a
STM32: add debug flags, fix hang in simplex SPI
2020-07-01 17:48:10 -04:00
ab9a64eafa
Add timer allocator, adjust pulsio to use general purpose timers
2020-07-01 10:35:49 -04:00
017c188ab5
Move NVM block to increase program size.
2020-06-25 21:46:15 -07:00
6c91af7d56
WIP
2020-06-25 17:27:01 -04:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices
...
Compute USB_DEVICES instead of requiring it to be specified
2020-06-24 13:31:56 -05:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
f67b307371
Merge pull request #3045 from k0d/stm32_alignment_issue
...
Fixes issue with memory alignment in STM32
2020-06-23 10:54:08 -07:00
93d3629da2
stm: Sort configuration options and make them all conditional
...
This makes them all overridable on the board level, tersely
2020-06-23 11:02:38 -05:00
0110463811
stm: Disable USB MIDI and most USB HID
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 11:01:36 -05:00
8a760b0657
stm: Pin.c: Compute GPIO_PORT_COUNT instead of specifying manually
2020-06-22 10:45:27 -05:00
5a3a0a5092
stm: Makefile: sort files in SRC_STM32
2020-06-22 10:45:23 -05:00
23da0fa99c
Fixes issue with memory alignment in STM32
...
When compiling with optimizations on, an issue occurs where the claimed_pins/never_reset_pins memory location is shared with another variable. This causes some bad memory read, so the USB pins ended up being reset. Setting these to have an alignment of 4 bytes resolves this.
Tested on nucleo_f746zg
2020-06-18 00:51:04 +02:00
fd4aafacbe
Add port D to LQFP64
2020-06-16 12:33:15 -04:00
2aac3cbdce
Revert I2C timing overrides, reduce scope to module only
2020-06-15 13:51:09 -04:00
724637faa3
Move I2C speed to clock-style definition
2020-06-11 11:17:51 -04:00
c08702414e
Add macros for setting correct F7 and H7 I2C timing
2020-06-10 16:36:44 -04:00
c88a8e66c6
Minor comment fix
2020-06-10 13:22:21 -04:00
7cc8b784c3
Add missing openmv definitions
2020-06-10 10:31:24 -04:00
b414f82669
Add DTCM and ITCM support to F7 series
2020-06-09 18:01:52 -04:00
ad0971fb25
Override HAL_Delay and HAL_GetTick
2020-06-05 13:56:32 -04:00
a0977cac7b
Merge remote-tracking branch 'upstream/master' into stm32-LSE-startup-fix
2020-06-04 16:15:38 -04:00
d14e34449b
Rework LSE clock init, allow clock overrides
2020-06-04 13:21:29 -04:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
dd2cd6f002
Merge pull request #2979 from hierophect/stm32-remove-crystals
...
STM32: Set correct crystal settings on Discovery boards
2020-06-01 15:21:39 -07:00
75eb44f234
Note temporary issue with Nucleo boards
2020-06-01 12:26:08 -04:00
0fe7efdf36
Set correct crystal settings on Discovery boards
2020-05-29 14:01:34 -04:00
ddcae19254
Merge pull request #2964 from hierophect/mimxrt-busio-cleanup
...
mimxrt10xx: Busio cleanup and bugfixes
2020-05-29 10:42:16 -07:00
fe75c7793c
Fix SWO/Analog overlap, style changes
2020-05-29 12:19:37 -04:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
a59798ed49
Merge branch 'mimxrt-uart-oneway' into mimxrt-busio-cleanup
2020-05-27 12:31:16 -04:00
9f5520135c
translations
2020-05-27 11:54:52 -04:00
53fb699436
Add pin resetting across boards, fix array size detection issue
2020-05-27 11:45:15 -04:00
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-20 10:48:27 -07:00
66c09efae2
Add UART one-way instance search, fix bugs in stm32 implementation
2020-05-20 12:48:01 -04:00
fd0420d432
Update digitalio api for other ports
2020-05-20 09:23:42 -07:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
3c1469b0a5
Add port_fixed_stack for more builds
2020-05-15 16:22:33 -07:00
ee2cb703c8
merged master
2020-05-12 14:41:28 +10:00
94949fb46f
Add recovery domain write access, adjust stack
2020-05-11 18:02:40 -04:00
Lucian Copeland
Jeff Epler
Scott Shawcroft
Jeff Epler
jgillick
Scott Shawcroft
Jeff Epler
Mark Olsson
Diego Elio Pettenò
Daniel Pollard