vesperk38
945f2f5aa1
line 172 has a typo correct 2MB to 4MB
2018-03-13 13:42:29 -04:00
Radomir Dopieralski
81ab2526e4
gamepad: Enable the gamepad module for express boards in 3.x
2018-03-11 13:39:54 +01:00
sommersoft
8c9cc6b7c0
nrf: changed Status to Runtime; instituted runtime singleton
2018-03-10 01:07:17 +00:00
Scott Shawcroft
e7fc0b6aa7
Use DMA for long SPI transactions including those to the SPI Flash.
...
QSPI is not currently working so its commented out.
This is progress on #652 .
2018-03-09 12:45:46 -08:00
Bryan Siepert
942b7ffbe0
fixes hardware dotstar support for 3.0 and addresses issue #514
2018-03-08 20:39:47 -08:00
sommersoft
c1c3a79ec4
atmel-samd: changed Status to Runtime; instituted runtime singleton
2018-03-09 02:19:51 +00:00
Scott Shawcroft
01aceaae50
Support all boards and remove erase and page sizes because they never change.
2018-03-01 12:45:12 -08:00
Scott Shawcroft
2ab923862b
Structify flash device definitions.
2018-02-28 19:15:54 -08:00
Dan Halbert
568c04e6af
Merge pull request #650 from tannewt/merge_2x
...
Merge in commits from 2.x branch.
2018-02-27 22:03:52 -05:00
Scott Shawcroft
bf05183158
Merge remote-tracking branch 'adafruit/2.x' into merge_2x
2018-02-27 15:24:16 -08:00
Dan Halbert
5c24023240
use CONF_GCLK_DAC_SRC and refactor a bit
2018-02-27 17:21:03 -05:00
Dan Halbert
4895a9d1d8
Use safe clock freqs for AnalogOut; use DAC REFRESH on SAMD51.
2018-02-27 15:44:27 -05:00
Bryan Siepert
e42209a6b2
fixes timer number assumptions for samd51s for issue #646
2018-02-27 00:42:40 -08:00
Scott Shawcroft
586be2eb22
Merge pull request #643 from dhalbert/3.0_esp8266_uart1
...
Add .baudrate support to ESP8266.
2018-02-26 17:40:13 -08:00
Dan Halbert
cc7acfd491
consistently brand Itsy Bitsy M0 as 'Express'
2018-02-26 17:37:03 -05:00
Dan Halbert
907b4417c0
Add .baudrate support to ESP8266.
...
busio.UART on ESP8266 provides a TX-only UART on GPIO2.
Fixed some bugs in the implementation.
2018-02-24 15:45:15 -05:00
Dan Halbert
957a82b592
add board.RX and .TX pins to metro_m4_express_revb
2018-02-23 09:54:39 -05:00
Kattni
7399a1a5c7
Merge pull request #634 from dhalbert/3.0_UART
...
Implement UART for 3.0 + related fixes.
2018-02-21 23:07:27 -05:00
Dan Halbert
5f101f3535
Add dummy UART implementation to nrf so it builds with UART turned on. Also add OneWire.
2018-02-21 22:53:17 -05:00
Dan Halbert
9b4477e1dc
Implement UART for 3.0 + related fixes.
...
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.
2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
a. async USART driver
b. bringing Atmel START configuration closer to what we use
c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
2018-02-21 17:18:49 -05:00
James Devine
9c5a9e3411
Update boards URL in README.rst
...
Corrected a (probably) old URL in the read me.
2018-02-21 16:14:46 +00:00
Scott Shawcroft
d02251f8cd
Add a new board for Metro M4 Express Rev B. This is the board
...
send to community members for testing.
Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
2018-02-20 12:34:07 -08:00
Scott Shawcroft
653fc8877d
Remove breakpoint instruction used for debugging.
2018-02-19 21:38:14 -08:00
sommersoft
60d6ccc731
changed spaced supervisor/Status.c line to tabbed
2018-02-20 03:44:45 +00:00
sommersoft
5de8df7997
added Status submodule to ports/nrf/common-hal/supervisor; issue #544
2018-02-19 22:27:16 +00:00
Scott Shawcroft
15f626be58
m4 qspi works. m0 compiles
2018-02-19 14:02:04 -08:00
Scott Shawcroft
f20d5723aa
Reorganize things. Reading jdec works.
2018-02-19 14:02:04 -08:00
Scott Shawcroft
4710a2adba
Compiles for m4. Untested on m0.
...
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
2018-02-19 14:02:04 -08:00
Scott Shawcroft
a2bd772d5c
Begin rework to add qspi support.
2018-02-19 14:02:04 -08:00
sommersoft
9ee4d13756
added Status submodule to ports/atmel-samd/common-hal/supervisor; issue #544
2018-02-19 20:49:18 +00:00
Dan Halbert
cb39bfcad9
Merge pull request #625 from tannewt/pulseio3
...
Re-enable pulseio for SAMD21 and SAMD51
2018-02-16 14:08:01 -05:00
Scott Shawcroft
a2b18b75d4
Fix loops and comma style.
2018-02-16 10:05:28 -08:00
Scott Shawcroft
eb2b41810a
Turn on lto
2018-02-15 16:12:58 -08:00
Scott Shawcroft
538081528d
pulsein works on m0
2018-02-15 16:04:39 -08:00
Scott Shawcroft
fcde138ea3
pulsein works on m4
2018-02-15 15:12:58 -08:00
Kevin Townsend
fce0b0858f
Removed leftover build option
2018-02-15 21:46:14 +01:00
Kevin Townsend
10497d1db0
Update for style consistency
2018-02-15 21:44:05 +01:00
Kevin Townsend
6544f4cb5c
Cleanup minor typos
2018-02-15 21:42:24 +01:00
Kevin Townsend
da15053e0a
Fixed pin P0_00
2018-02-15 21:41:21 +01:00
Kevin Townsend
d4356f9416
Added second 'P0_00'
2018-02-15 17:00:58 +01:00
Kevin Townsend
cd7baed14d
Added note nrfutil and flashing
2018-02-15 16:00:34 +01:00
Kevin Townsend
70596b6641
Added note on MSDDisable
2018-02-15 15:51:10 +01:00
hathach
f989db25b5
more bootloader feather52840 update
2018-02-15 21:43:27 +07:00
hathach
2e0edd5a63
Merge branch 'nrf52840' of github.com:microbuilder/circuitpython into nrf52840
2018-02-15 15:19:47 +07:00
hathach
2c9cd38547
update bootloader for feather52840
2018-02-15 15:12:30 +07:00
Scott Shawcroft
07230f2637
pulsein compiles but doesn't work
2018-02-14 16:59:04 -08:00
Scott Shawcroft
c7af17525b
m4 pulseout works
2018-02-14 11:38:52 -08:00
Scott Shawcroft
6a7d889dd4
m0 pulseout works. Factored out shared timer code.
2018-02-13 18:17:20 -08:00
Scott Shawcroft
8479eef578
m0 tc and tcc work
2018-02-13 16:44:04 -08:00
Scott Shawcroft
6c3075bec6
m4 tc and tcc works. multi-tcc channels ok too.
2018-02-13 14:22:55 -08:00
Kevin Townsend
0981c579f0
Fixed pin names
2018-02-13 18:26:28 +01:00
Kevin Townsend
b65e97bdb3
Update pin names
2018-02-13 18:17:31 +01:00
Kevin Townsend
5160dda473
Merge branch 'master' into nrf52840
2018-02-13 18:13:47 +01:00
Kevin Townsend
7b1cc9985b
Merge branch 'master' of github.com:adafruit/circuitpython
2018-02-13 18:11:20 +01:00
Kevin Townsend
fac488fbf8
Merge pull request #617 from arturo182/nrf_gpio_cleanup
...
nrf: Change pin names on DKs to match silkscreen
2018-02-13 17:54:25 +01:00
Kevin Townsend
283be4f58e
Added note on installing nrfutil
2018-02-13 11:55:24 +01:00
Kevin Townsend
7b6d1052d9
Improved README
2018-02-13 11:50:51 +01:00
Kevin Townsend
6a8bafc91b
Updated FATFS to 256KB
2018-02-13 11:50:29 +01:00
Kevin Townsend
fc28fc4f0b
Added notes on flashing bootloader
2018-02-13 11:26:10 +01:00
Kevin Townsend
4745272d6c
Added feather52840 readme
2018-02-13 09:34:09 +01:00
Kevin Townsend
76eacad27b
Updated board detection macro
2018-02-13 08:52:17 +01:00
Kevin Townsend
9f1cd41d77
Update to S140
2018-02-13 08:44:35 +01:00
Kevin Townsend
d2b8ae66cb
Update mpconfigboard.h
2018-02-13 08:42:44 +01:00
Scott Shawcroft
cc616aea4e
m4 tc output works. Watch out for the PAC!
2018-02-12 23:41:26 -08:00
Kevin Townsend
59f25fb7a5
Update to S140
2018-02-13 08:40:40 +01:00
hathach
3a54a67f3d
add 52840 serial bootloader
2018-02-13 13:32:47 +07:00
hathach
3bb45511fa
add feather52840 board
2018-02-13 12:26:34 +07:00
arturo182
7579057ee2
nrf: Use -O1 for debug builds
...
While O0 is great for debugging, the produced binary doesn't fit on the
feather52 anymore.
2018-02-12 22:50:07 +01:00
arturo182
9962ea6449
nrf: Change pin names on DKs to match silkscreen
...
Quite a big revamp of the make-pins script, it is now used on each
build to generate the pin files, so the static ones are not needed
anymore.
2018-02-12 22:41:19 +01:00
Kevin Townsend
0388a57f77
Merge pull request #614 from arturo182/nrf_pca10040
...
nrf: Fix pca10040 support
2018-02-12 16:31:14 +01:00
Kevin Townsend
5d99cd0a20
Merge pull request #601 from arturo182/nrf_cleanup
...
Nrf cleanup
2018-02-12 11:28:47 +01:00
arturo182
f1d8a2d149
nrf: Fix memory misalignment during flash write
2018-02-10 14:43:58 +01:00
Scott Shawcroft
0397202288
m4 compiles, pwmout implemented but TC0 (A1) doesn't run
2018-02-09 17:21:06 -08:00
Scott Shawcroft
0398f308fa
m4 compiles, pwmout implemented
2018-02-09 16:37:27 -08:00
Scott Shawcroft
190e7d629e
WIP
2018-02-09 16:37:27 -08:00
Dan Halbert
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
Dan Halbert
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio
...
Enable bitbangio now that we have digitalio.
2018-02-08 21:24:32 -05:00
Scott Shawcroft
3e63f59867
Use write instead of set because it clears the bits before setting them.
2018-02-08 16:12:33 -08:00
Scott Shawcroft
aeae0090af
Enable bitbangio now that we have digitalio.
...
Also remove a rogue neopixel_write.
2018-02-08 16:03:05 -08:00
Scott Shawcroft
82bc11585e
ports/atmel-samd: Re-enable analogio
...
This introduces SAMD51 support and re-enables SAMD21 support.
Fixes #263
2018-02-08 14:48:08 -08:00
Scott Shawcroft
3e79638b9c
Merge pull request #603 from siddacious/SAMD51G_support
...
Added SAMD51G support as per issue #597
2018-02-08 09:55:48 -08:00
Kevin Townsend
e5f0cfcf20
Merge pull request #604 from arturo182/nrf_bitbangio
...
nrf: Use the shared bitbangio module
2018-02-08 09:57:44 +01:00
Bryan Siepert
dfc2b82ede
Added SAMD51G support as per issue #597
2018-02-07 21:23:25 -08:00
Kevin Townsend
71128b575f
Merge pull request #602 from arturo182/nrf_struct
...
nrf: Use the shared struct module
2018-02-08 00:56:31 +01:00
arturo182
a7cde0e49a
nrf: Fix pca10040 support
...
Works with no SD, or s132 2.0.1 and 5.0.0.
2018-02-07 23:41:21 +01:00
arturo182
381f47bfb0
nrf: Only support SD 132 v2.0.1 and v5.0.0 and SD 140 v6.0.0
2018-02-07 22:44:27 +01:00
arturo182
8bfdaa89b9
nrf: Remove SAMD mentions carried over while copying files
2018-02-07 22:44:27 +01:00
arturo182
05bd5d4ee6
nrf: Remove nRF51 boards and files, update README
2018-02-07 22:44:13 +01:00
arturo182
29ae4cdd1c
nrf: Fix building pca10056 without SD
2018-02-07 22:41:26 +01:00
arturo182
47c8e20e5a
nrf: Make sure to not use SD functions when SD not available
2018-02-07 22:41:20 +01:00
Kevin Townsend
9d191f7f9f
Merge pull request #589 from arturo182/nrf_gamepad
...
nrf: Implement ticks, add gamepad module and example
2018-02-07 22:17:05 +01:00
arturo182
afaee7f782
nrf: Use the shared bitbangio module
2018-02-07 00:03:23 +01:00
arturo182
021df5d3d3
nrf: Cleanup AnalogOut and throw an exception in constructor
...
The nRF MCUs do not support analog output. Throwing an exception
in the constructor will stop users from creating an instance of
the AnalogOut class.
In the future we can ifdef-out the whole class so it is not available
in the module at all.
2018-02-06 21:15:49 +01:00
Kevin Townsend
c433a82082
Merge pull request #573 from arturo182/master
...
nRF port improvements and pca10056 support
2018-02-06 15:26:40 +01:00
arturo182
d1b2f69771
nrf: Use the shared struct module
2018-02-05 20:50:06 +01:00
arturo182
1de2ee6884
nrf: Implement ticks, add gamepad module and example
2018-02-05 20:48:25 +01:00
arturo182
76f5c01798
nrf: Get the port working on pca10056 (nRF52840)
2018-02-05 20:38:41 +01:00
arturo182
a64b5c84de
nrf: Fix missing LED GPIO initialization
...
led_init was never called, which means the GPIOs were never set to
output and the LEDs didn't work.
2018-02-03 13:51:11 +01:00
arturo182
6731b47d5a
nrf: Implement MCU temperature reading
...
If softdevice is available and enabled the SD function will be used,
otherwise use MCU registers.
2018-02-02 20:33:21 +01:00
arturo182
c6a542d166
nrf: Add SD 6.0.0-6.alpha to the download script
2018-02-02 20:31:47 +01:00
arturo182
fed9087274
nrf: Add flash section for fatfs for no SD pca10056
2018-02-02 20:31:47 +01:00
arturo182
616cbc6271
nrf: Use more generic header
...
It will include the mcu-specific header based on defines.
2018-02-02 20:31:47 +01:00
arturo182
d0b451be94
nrf: Use the right SPI registers on nRF52840
2018-02-02 20:31:47 +01:00
arturo182
a776c2a51c
nrf: Fix errorneous indent
...
Otherwise we get the "recipe commences before first target" messsage.
2018-02-02 20:31:47 +01:00
Dan Halbert
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
Dan Halbert
64831f4e7d
add SPI.frequency to nRF
2018-01-30 13:23:00 -05:00
Dan Halbert
e550b024c5
atmel-samd: Correct computation of SPI baud rate.
...
all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
Dan Halbert
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0
...
Update ugame port for the final ugame10 version
2018-01-29 13:35:06 -08:00
Radomir Dopieralski
d595a03bbd
Update ugame port for the final ugame10 version
...
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
2018-01-29 22:19:09 +01:00
Radomir Dopieralski
189c62ac7d
Bring back the _stage library
...
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
2018-01-29 21:24:46 +01:00
Dan Halbert
efbf08266b
make _estack be double-word aligned
2018-01-24 19:24:36 -05:00
Scott Shawcroft
6560596864
Switch to m_malloc_maybe and m_free to reduce our dependence on gc_alloc.
...
gc_alloc's API is changing and we shouldn't need to care about it.
So, we switch to m_malloc which has the default behavior we expect.
2018-01-23 16:45:07 -08:00
sommersoft
fe851fc15e
re-added header inlcusion for system_get_chip_id
2018-01-23 13:50:24 -08:00
brentrubell
ab1f133667
issue #536 CPX change SPI pin designations to externally available pins ( #540 )
...
* issue #536 CPX
* switched pin assignment
2018-01-22 19:31:55 -08:00
Tony DiCola
4bd1d09d74
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x ( #539 )
2018-01-19 11:53:47 -08:00
sommersoft
44bc1711aa
Added Unique ID Functions/Updated Support Matrix ( #527 )
...
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448 .
shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes #462 .
2018-01-18 11:39:11 -08:00
hathach
dfa6b6e9c5
add Ctrl+C for REPL over bleuart
2018-01-18 11:32:47 -08:00
Kevin Townsend
d5af898999
Added note on REPL over NUS
2018-01-18 11:32:47 -08:00
hathach
5e6f113779
add REPL via bleuart
2018-01-18 11:32:47 -08:00
microbuilder
fda065ea89
Minor scan example cleanup
2018-01-18 11:32:47 -08:00
microbuilder
e2ebcbe514
Simple BLE scanner example
2018-01-18 11:32:47 -08:00
microbuilder
1276c12097
Enable SD132v2.0.1 BLE and UBLUEPY support by default
2018-01-18 11:32:47 -08:00
Dan Halbert
23eb79ca8f
turn on MICROPY_ENABLE_SOURCE_LINE in nrf
2018-01-16 18:11:54 -08:00
Dan Halbert
01443a9619
Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf.
...
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
2018-01-16 18:11:54 -08:00
Dan Halbert
2d5483082d
Checked wrong RCAUSE bit for system_reset
2018-01-08 15:45:07 -08:00
Dan Halbert
1805bcac76
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge) ( #513 )
...
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge)
RCAUSE (reset cause) is fetched differently in SAMD21 vs SAMD51
2018-01-08 09:44:06 -08:00
Dan Halbert
d0cc8abd31
revise boards/ files for 3.0. All now compiled (but I don't have all to test).
2018-01-04 14:16:53 -05:00
Dan Halbert
19d353ccd9
nrf: fixups for changes from 2.2
...
1. bidirectional SPI support (@microbuilder please check)
2. slight changes in DigitalIO types
3. placeholders (not implemented yet) for single/double-click bootloader support
2018-01-03 16:50:57 -05:00
Dan Halbert
d8686cc002
use correct LD_FILE in mpconfigboard.mk for boards with external flash
2018-01-03 16:49:38 -05:00
Dan Halbert
065e82015f
merge from 2.2.0 + fix up board defs
2018-01-02 21:25:41 -05:00
Dan Halbert
ce81c8dda9
Avoid gcc 7.2.1 compiler issues in nlr_push() ( #506 )
...
Avoid gcc 7.2.1 compiler issues in nlr_push()
2018-01-02 13:41:34 -08:00
hathach
a997ab258e
spacing clean up
2017-12-29 23:07:32 +07:00
hathach
7f79a0e78c
added Ctrl+C interrupt
2017-12-29 22:43:31 +07:00
hathach
a021a9e5f0
update uart to remove dependency on machine uart module
2017-12-29 21:25:43 +07:00
microbuilder
178925640b
Moved comment to avoid abbreviation
2017-12-27 21:13:39 +01:00
microbuilder
a14bfeba64
Merge branch 'nrf52_3.x' of github.com:microbuilder/circuitpython into nrf52_3.x
2017-12-22 12:03:41 +01:00
microbuilder
60feb1a9aa
Added .gitattributes for ZIP bin support
2017-12-22 12:03:25 +01:00
Kevin Townsend
b3928288f0
Add files via upload
2017-12-22 12:02:15 +01:00
Kevin Townsend
8dcd9cc35c
Delete feather52_bootloader_5.0.0_s132_single.zip
2017-12-22 12:00:41 +01:00
Kevin Townsend
de72f7fabb
Delete feather52_bootloader_2.0.1_s132_single.zip
2017-12-22 12:00:34 +01:00
microbuilder
ad7cd0399d
Added 'mp_raise_NotImplementedError(NULL)'
2017-12-22 11:48:07 +01:00
microbuilder
b9e229f739
Removed old code snippets
2017-12-22 11:47:15 +01:00
microbuilder
ace872bf11
Added 'mp_raise_NotImplementedError(NULL)'
2017-12-22 11:45:51 +01:00
microbuilder
a3289c3c2f
Added D13 for standard LED examples
2017-12-22 11:42:33 +01:00
microbuilder
393bc9bce9
Removed leftover code snippet
2017-12-22 11:39:40 +01:00
microbuilder
c868b66f5b
Minor typo removed in path
2017-12-22 11:33:17 +01:00
microbuilder
99dd0a61ff
Spaces to tabs
2017-12-22 11:29:39 +01:00
microbuilder
60a23f0fb6
nRF52 update with internal file system support
2017-12-21 13:49:14 +01:00
Dan Halbert
72c911be97
Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now.
2017-11-27 21:00:24 -05:00
Stewart
fb1dcd326d
ports/atmel-samd: feather_m0_adalogger readme updates ( #460 )
...
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
- Added Setup information regarding arm complier packages
- README - Updated to reflect that feather_m0_adalogger microSD is supported
2017-11-26 21:10:01 -08:00