Improved README
This commit is contained in:
parent
6a8bafc91b
commit
7b6d1052d9
|
@ -1,5 +1,20 @@
|
|||
# Setup
|
||||
|
||||
The `feather52840` board is currently based on the `PCA10056` development
|
||||
board from Nordic Semiconductors, since commercial modules are not yet
|
||||
available for the nRF52840.
|
||||
|
||||
The difference between the `pca10056` and `feather52840` board support
|
||||
packages is that no bootloader is present on the `pca10056` (a HW debugger
|
||||
like a Segger J-Link is required to flash firmware images), whereas the
|
||||
`feather52840` package uses a serial bootloader, with a slightly different
|
||||
flash layout to account for the bootloader's presence.
|
||||
|
||||
Both targets run on the same hardware and assume the same pinouts.
|
||||
|
||||
The `feather52840` board support package will be updated at a later date
|
||||
to reflect any pin changes in the final Feather form-factor HW.
|
||||
|
||||
## Installing CircuitPython submodules
|
||||
|
||||
Before you can build, you will need to run the following commands once, which
|
||||
|
|
Loading…
Reference in New Issue