bc8863a3c7
Simplify now that I have it working
...
still need to figure out the bound method business
2020-09-19 21:04:07 -07:00
04ffd0dca0
Add gateway, subnet, and rssi info for current connected AP
...
ap_rssi is a bound method, which I'm not keen on, but it works
2020-09-19 13:38:04 -07:00
dfd09bba57
Merge pull request #3433 from astrobokonon/esp32s2-bssid
...
ESP32S2: Allow connecting to specific bssid
2020-09-18 21:31:15 -04:00
17bdc969db
Reorganize sdkconfigs and release UF2s
2020-09-17 16:01:23 -07:00
1805e92038
Add else case for non-bssid usage
2020-09-17 15:04:27 -07:00
7f60ebd6c7
Merge pull request #3426 from tannewt/esp_flash_sizes
...
Add partition layouts for 8 and 16 MB as well.
2020-09-17 13:27:58 -07:00
9cf9441ba6
Merge pull request #3393 from tannewt/fix_spi_psram
...
Add non-DMA SPI support.
2020-09-17 11:11:56 -07:00
78338ac12b
Merge pull request #3417 from hierophect/esp32s2-readme
...
ESP32S2: Add Readme
2020-09-17 10:58:17 -07:00
1e3241ec6d
Merge branch 'main' into esp32s2-bssid
2020-09-16 17:15:01 -07:00
daa1dd278d
connect now accepts bssid
2020-09-16 16:25:17 -07:00
c55deb54f0
Merge pull request #3427 from usini/muselab_nanoesp32_s2
...
Added board - Muselab nanoESP32-S2
2020-09-16 12:23:41 -07:00
18285f96e8
RTC is pickd up automatically
2020-09-16 10:13:07 -07:00
478a4b6405
Clarify location of port root
2020-09-16 10:51:08 -04:00
c06aeda399
Add Muselab nanoesp32 s2 definition
2020-09-16 13:10:01 +02:00
fead60d2d8
Add BSSID to Network
2020-09-15 23:32:53 -07:00
2bd169ec32
Add partition layouts for 8 and 16 MB as well.
2020-09-15 18:12:06 -07:00
bd381e434f
Revert "code review feedback"
...
This reverts commit f9f614b3a2
2020-09-15 13:02:26 -07:00
f9f614b3a2
code review feedback
2020-09-15 11:28:31 -07:00
8fcdc7da16
RTC enabled
2020-09-14 23:24:44 -07:00
3640ef2b7f
Fix toctree, incorrect flash port assumptions
2020-09-14 17:37:55 -04:00
6ecfdda580
Add Readme
2020-09-14 13:18:51 -04:00
e504438fd2
Remove unlicensed file, fix reset pin type check
2020-09-14 11:58:13 -04:00
ecc219fe50
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-14 10:44:31 -04:00
4da478382d
Fix serial console output & add more boards
2020-09-12 17:46:52 +05:30
305bed6d9e
Added esp32s2 safe_mode & fixed user_safe_mode
2020-09-11 21:06:54 +05:30
c7c90f47b0
Add non-DMA SPI support.
...
This fixes SPI with PSRAM allocated buffers. DMA with SPI2 was
attempted but produced junk output. This manual copy is less than
2x slower than DMA when not interrupted.
Fixes #3339
2020-09-10 17:32:20 -07:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
683462c1b1
Merge pull request #3326 from tannewt/native_wifi
...
Add native wifi API with ESP32S2 support
2020-09-10 11:20:44 -07:00
be199983c1
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-09 13:24:30 -04:00
99f5011d74
Fix heap without PSRAM. Never set heap_size.
2020-09-08 17:06:09 -07:00
14af8e4b42
Added temp_sensor_stop
...
Co-authored-by: hierophect <hierophect@gmail.com>
2020-09-08 21:07:00 +05:30
c68723db3c
Update Processor.c
2020-09-08 15:13:48 +05:30
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
96cf60fbbd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-09-03 16:34:56 -07:00
0b94638aeb
Changes based on Dan's feedback
2020-09-03 16:32:12 -07:00
4733a67226
Add GDB debugging capability
2020-09-02 11:27:42 -04:00
7b59ede25e
Add remaining pins
2020-08-28 18:22:22 -07:00
0bb5c6c07f
Add unique USB PID
2020-08-28 16:37:25 -07:00
a09243472c
Add Kaluga board definition
2020-08-28 16:08:24 -07:00
ac06202c21
Merge pull request #3238 from ElectronicCats/bastwifi
...
Add Bastwifi by Electronic Cats
2020-08-28 11:03:52 -04:00
2b71635c49
Fix esp-idf requirements
2020-08-27 11:45:51 -07:00
fd6e63d806
Hopefully final partition scheme.
2020-08-27 11:43:06 -07:00
767ca5c3dc
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-27 11:42:31 -07:00
24fb08dbd9
Merge pull request #3337 from hierophect/pulseout-errorstyle
...
Fix problematic whitespace on pulseout parameter errors
2020-08-27 13:22:26 -04:00
350e88d4b9
Merge pull request #3324 from hierophect/esp32-random
...
Add random to ESP32-S2, fix it on STM32
2020-08-27 13:22:05 -04:00
6100027243
Merge pull request #3315 from tannewt/add_psram
...
Add PSRAM support to ESP32S2
2020-08-27 11:58:59 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
a15f948a40
Merge branch 'main' into esp32-random
2020-08-27 10:49:14 -04:00
fe73cfb922
Merge pull request #3333 from hierophect/esp32-enable-ulab
...
Fix all assignments affected by inline makefile comments
2020-08-27 10:36:59 -04:00
553ac576eb
Disable ulab
2020-08-26 17:48:29 -04:00
c77523503b
Fix trailing whitespace errors across ports and docs
2020-08-26 14:48:46 -04:00
44342732a4
Fix DOS line endings, they give my git fits
2020-08-26 10:56:00 -05:00
5755160720
Merge pull request #3322 from microDev1/microS2
...
Added board - microS2
2020-08-26 11:03:46 -04:00
f26d15c5c9
Added PSRAM support
2020-08-26 18:39:30 +05:30
01ddb177fc
Remove whitespace in sdkconfig
2020-08-26 09:07:54 -04:00
f7d224705f
Trim trailing whitespace in pins.c
2020-08-26 09:01:27 -04:00
0425305a73
Change microS2 board name
2020-08-26 08:40:46 +05:30
b019ef2e43
Change microS2 board name
2020-08-26 08:38:42 +05:30
f1f316c502
Change microS2 board name
2020-08-26 08:37:36 +05:30
3f699024d9
Change microS2 board name
2020-08-26 08:36:38 +05:30
1dce6bd7ca
Change microS2 board name
2020-08-26 08:35:09 +05:30
bf2b594066
Change microS2 board name
2020-08-26 08:33:21 +05:30
8b71e26abd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-25 16:39:23 -07:00
380cbfba55
Add hash to Socket so it can be used in dicts
2020-08-25 16:15:45 -07:00
69fc872944
Fix espidf.MemoryError print
2020-08-25 16:14:31 -07:00
f71f6631cc
Enable ulab
2020-08-25 14:24:35 -04:00
05bde255f7
Add random to ESP32-S2, fix it on STM32
2020-08-25 14:00:29 -04:00
89c6a44e4e
Added microS2 specific config files
2020-08-25 20:35:08 +05:30
645adaadb0
Added microS2 specific config files
2020-08-25 20:32:44 +05:30
3eea3b5311
Added microS2 specific config files
2020-08-24 11:12:35 +05:30
f39708abb2
Add PSRAM support to ESP32S2
...
When configured the CircuitPython heap will be on the external RAM.
When not available, the heap will be 48k inside the IDF heap.
2020-08-21 16:20:58 -07:00
da61845f56
Add missing include
2020-08-21 13:32:59 -07:00
83deea0e03
Fix copy pasta and stub build
2020-08-21 11:17:42 -07:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
701e80a025
Make socket reads interruptable
2020-08-21 11:00:02 -07:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
80b15f6b3b
Add error handling w/temp debug logs
2020-08-19 17:51:33 -07:00
eb8b42aff1
Add basic error handling
2020-08-19 14:23:28 -07:00
9602ee6265
Disable wifi debug logging and memory log
2020-08-19 14:23:28 -07:00
dcc42f6281
Remove debug prints
2020-08-19 14:23:28 -07:00
1034cc1217
Add espidf module.
2020-08-19 14:23:28 -07:00
b3a449c276
Turn on json and enable socket.close
2020-08-19 14:23:28 -07:00
430530c74b
SSL works until it runs out of memory
2020-08-19 14:23:28 -07:00
eb2c38825e
HTTP works with my adafruit_requests
2020-08-19 14:23:18 -07:00
c9ece21c28
SocketPool stubbed out
2020-08-19 14:22:13 -07:00
7bdd243bf6
Ping works!
2020-08-19 14:22:13 -07:00
3860991111
Ping work and start to add socketpool
2020-08-19 14:22:13 -07:00
cdab5e793e
Update to latest idf
2020-08-19 14:22:13 -07:00
c62ab6e09a
Add ipaddress
2020-08-19 14:22:12 -07:00
ddcff85fa2
Add debugging. Scanning doesn't crash but returns no results. Need to config station.
2020-08-19 14:22:12 -07:00
1a6f4e0fe0
Scanning WIP. Need to sort out supervisor memory
2020-08-19 14:22:12 -07:00
c5b8401a15
First crack at native wifi API
2020-08-19 14:21:59 -07:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
dd425ee6c5
Remove breaking parenthesis
2020-08-18 15:54:50 -04:00
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
7078c63062
Add missing Neopixel pin definition
2020-08-14 16:58:24 -04:00
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
88fcc19e24
Add PulseIn
2020-08-14 15:30:48 -04:00
f9512983ff
Add PulseOut
2020-08-14 12:21:41 -04:00
3197c579e0
Merge pull request #3262 from tannewt/fix_fs_corruption
...
Fix writing sector 0 as the first write.
2020-08-12 08:14:55 -07:00
8488b31aa0
Init directly
2020-08-11 11:19:40 -07:00
87c78be8f4
Fix writing sector 0 as the first write.
...
This was the FS issue I saw when debugging wifi and only happens
when the first write is to sector 0. It causes issues because it
blanks all of sector 0 after the first block.
Fixes #3133
2020-08-10 17:14:49 -07:00
d47bd5529c
Fix neopixel macro issue, set default neopixel color
2020-08-10 13:16:20 -04:00
78d049d0f1
Fix pwm reset spew, protect against null reference in led status
2020-08-05 14:05:53 -04:00
14b3b51c58
Rework build flags, prevent idf errors
2020-08-04 18:40:24 -04:00
0e30fe1cc5
Update VID & PID codes
2020-08-02 19:54:11 -05:00
b074f8a161
update for build test
2020-08-02 00:42:36 -05:00
fea1cad02c
add support for Bast Wifi Electronic Cats
2020-08-01 17:51:45 -05:00
94b2561860
Fix include error
2020-08-01 09:22:18 -04:00
1c1df053d5
Add neopixel support
2020-07-31 15:34:12 -04:00
d37326326d
init bastwifi
2020-07-28 00:56:37 -05:00
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
6a46fd5b91
Merge pull request #3185 from hierophect/esp32-pulseio
...
ESP32-S2: PWMOut
2020-07-23 13:11:33 -07:00
cf0a4d208e
Fix unintended timer reset, style changes
2020-07-23 14:01:10 -04:00
61a2e4f94b
Add PWMOut
2020-07-22 16:34:18 -04:00
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
db5c3c9676
dded optimization for esp32s2
2020-07-21 17:54:47 -05:00
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
207369ec09
Add boilerplate, create basic PWMOut test
2020-07-17 17:28:23 -04:00
9cdf5e148a
Merge pull request #2879 from jepler/background-callback
...
Use a linked list of background tasks to perform
2020-07-17 15:46:03 -05:00
72f6d7ee21
Merge pull request #3155 from jepler/esp32s2-parallel-build
...
esp32s2: Take care to invoke the sub-build-system only once
2020-07-16 11:26:53 -07:00
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
a2919a6fb2
esp32s2: Use the device's EUI-48 address as unique ID
...
On my hardware, esptool reports
MAC: 7c:df:a1:02:6c:b8
after this change, the USB descriptor says SerialNumber: 7CDFA1026CB8
and microcontroller.cpu.id has
>>> "".join("%02x" % byte for byte in microcontroller.cpu.uid)
'c7fd1a20c68b'
Note that the nibble-swapping between USB and cpu.uid is typical.
For instance, an stm32 board has USB SerialNumber
24002500F005D42445632302 but hex-converted microcontroller.cpu.id
420052000f504d4254363220.
2020-07-15 11:45:13 -05:00
910f69c42b
esp32s2: Take care to invoke the sub-build-system only once
...
This allows "make -j" in the outer build system to function properly,
with a potentially large decrease in build times on high end desktop
systems.
2020-07-15 10:30:07 -05:00
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
367d3800fc
Return false if we already have the lock
2020-07-01 14:35:25 -07:00
5028804878
Remove fixed pointers and check UART return
2020-06-30 15:29:42 -07:00
69b3d47564
Fix other esp builds
2020-06-29 18:21:53 -07:00
bbedd43273
change CMake verision requirement
2020-06-27 13:27:42 -04:00
7f6bef3251
Remove debug prints
2020-06-26 16:56:17 -07:00
08749630a2
Fix SPI RX and remove debug prints
2020-06-26 16:30:24 -07:00
2d579cc995
Use NULL for deinited DigitalInOut
...
This fixes a Display issue where no backlight pin is given but it's
still deinitialized.
2020-06-26 12:33:50 -07:00
a9f257bcd6
Store host_id so that never reset works
2020-06-26 12:32:56 -07:00
0f074fb956
Merge pull request #3072 from PTS93/patch-2
...
Update minimum required cmake to 3.16
2020-06-26 10:02:24 -07:00
a80d7479d0
Update minimum required cmake to 3.16
...
Earliest tested version that compiles.
Failed with version 3.10
2020-06-26 02:04:14 +02:00
0a41b86f6b
Fix typo inserting IDF_PATH variable
2020-06-26 01:36:03 +02:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
03e5043af4
Turn off Idle WDT and speed up CPU
2020-06-24 13:10:31 -07:00
ed6e81d688
Switch SPI to polling DMA and enable displayio
2020-06-24 13:10:08 -07:00
496e16d99b
Handle memory (hopefully). Short TX works
2020-06-24 12:47:59 -07:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
fc9c0ba573
Initial SPI implementation. Almost certainly doesn't compile
2020-06-24 12:47:59 -07:00
f52f60b17d
Add UF2 build target
2020-06-24 12:47:59 -07:00
7b56617f8e
Turn off stub so flash works over native usb
2020-06-24 12:47:58 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
6f050d7af3
Add pull up testing, proper us delay and stop supporting 45 and 46 for I2C
2020-06-24 12:47:58 -07:00
ae52d052cb
Fix I2C thanks to Mark!
2020-06-24 12:47:58 -07:00
d0401f02a9
Add initial I2C support, not quite working fully though
2020-06-24 12:47:58 -07:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
458eef052e
esp32s2: Disable USB MIDI
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 10:57:25 -05:00
ec7a3feeba
Redid formula for calculating subticks
...
changed subticks calculation to give a range from 0 to 32767.
2020-06-09 10:08:49 -05:00
d8bb2d7c6d
Correct ticks being returned from port_get_raw_ticks()
...
Issue #2958 . Correct calculation of usec back to ticks in port_get_raw_ticks().
2020-06-08 10:52:27 -05:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
2fb4fa3289
Spill registers before scanning the stack.
...
From the change:
// xtensa has more registers than an instruction can address. The 16 that
// can be addressed are called the "window". When a function is called or
// returns the window rotates. This allows for more efficient function calls
// because ram doesn't need to be used. It's only used if the window wraps
// around onto itself. At that point values are "spilled" to empty spots in
// the stack that were set aside. When the window rotates back around (on
// function return), the values are restored into the register from ram.
// So, in order to read the values in the stack scan we must make sure all
// of the register values we care about have been spilled to RAM. Luckily,
// there is a HAL call to do it. There is a bit of a race condition here
// because the register value could change after it's been restored but that
// is unlikely to happen with a heap pointer while we do a GC.
Fixes #2907
2020-05-28 18:34:14 -07:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
a9419b5d46
Update ESP IDF
2020-05-28 15:38:48 -07:00
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
93df3b89e8
allow PORT specifcation for esp32s2 flashing
2020-05-22 09:54:29 -04:00
a43876ad1e
Fix esp wrover
2020-05-20 11:37:29 -07:00
80517c4cf6
First try at critical section support
2020-05-19 17:49:17 -07:00
49090d1378
Fully implement digitalio and pin-in-use tracking.
...
Fixes #2901
2020-05-19 17:46:29 -07:00
03b6f7b87b
Add commend about FreeRTOS stack canary
2020-05-18 17:28:13 -07:00
164628282d
Update TinyUSB and shorten USB task delay
2020-05-18 17:27:49 -07:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
Ryan T. Hamilton
Dan Halbert
Scott Shawcroft
Scott Shawcroft
Ryan T. Hamilton
askpatricw
Lucian Copeland
Rémi Sarrailh
microDev
root
Jeff Epler
Dan Halbert
sabas1080
DavePutz
Jeff Epler
Jeff Epler
Diego Elio Pettenò
jerryneedell
Timon