2ff038f08b
fixing c formatting
2021-10-04 14:55:44 -06:00
e636db713f
Lose dependency to USB via CIRCUITPY_USB define for atmel port.
2021-10-04 10:57:39 +02:00
6a8b4f5f07
fixed c formating
2021-10-03 23:13:58 -06:00
5ceb72009e
fixed c formating for pre-commit check
2021-10-03 22:42:04 -06:00
b95325e3c7
Merge branch 'samd-sleep' into samd-sleep-v1
2021-10-03 17:16:27 -06:00
f748d66128
Setup outline for SAMD alarm module
2021-10-03 14:57:44 -07:00
7a703aaa64
adding comments
2021-10-02 15:00:18 -06:00
79cd10ac85
cleaning up TimeAlarm and PinAlarm
2021-10-01 17:36:04 -06:00
d536be7228
working samd deep sleep timealarm and pinalarm (sketchy)
2021-09-29 11:44:15 -06:00
c5672066d0
initial xiao kb config
2021-09-20 15:52:28 -06:00
4eda8b04c4
removing redudant pycubed v04 board defs
2021-09-16 12:12:15 -06:00
1ccaeeb619
adding back heritage pycubed board defs
2021-09-15 14:36:27 -06:00
4f10a91f85
moving boot counter to main() and re-adding old pin names for SD_CS
2021-09-15 14:33:54 -06:00
5b69aa0a58
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-15 14:23:56 -06:00
0ab4df6f2f
shrink some SAMD21 builds, and nrf simmel
2021-09-14 17:10:49 -04:00
81e28308c2
Revert "turn off inline-unit-growth and max-inline-insns-auto uses"
...
This reverts commit 94d76e0f48
2021-09-14 16:56:04 -04:00
94d76e0f48
turn off inline-unit-growth and max-inline-insns-auto uses
2021-09-14 12:15:21 -04:00
dbd557dc89
splitting pycubed board def into pycubed_v04 and pycubed_v05
2021-09-11 20:29:40 -06:00
d9ae2c00b4
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-11 20:09:59 -06:00
aa1d089cdb
proxlight: Freeze adafruit_adps9960 instead of adafruit_hid; enable usb_midi
2021-09-10 14:50:09 -04:00
fa83c1c2f9
adding boot counter to main.c
...
The boot counter is a uint8_t single-byte counter stored in the first NVM byte position (`micrcontroller.nvm[0]`). The counter increments by 1 each time the board boots, regardless if it's a hard or soft reset.
Enable the boot counter by adding `#define CIRCUITPY_BOOT_COUNTER 1` to your board's mpconfigboard.h file. Note that an error will be thrown during the build if `CIRCUITPY_INTERNAL_NVM_SIZE` is not also set within mpconfigboard.h.
2021-09-08 19:56:23 -06:00
674a3027fc
updating pycubed firmware for mainboardv05 :)
2021-09-04 18:39:24 -06:00
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
d526925d49
make aesio module full build dependent
2021-09-02 19:02:01 +05:30
0d280fa83c
Two fixes, one for ble workflow, one for linking
...
BLE workflow had an incorrect list size for characteristics
Linking didn't advance . link it should have without extra ().
2021-09-01 12:43:43 -07:00
cd5acae4f4
Sort .text section to reduce fill
2021-08-31 18:04:01 -07:00
771b4c7464
Add two space saving knobs
...
* Reduce the number of supported HID reports of IDs per descriptor.
This saves ~200 bytes in the default HID objects.
* (Not enabled) Compute QSTR attrs on init. This trades 1k RAM for
flash. Flash is the default (1).
2021-08-31 13:02:34 -07:00
838d30b3a4
Fix incorrect macros
2021-08-30 14:40:14 -07:00
8f024316ad
explicitly disable paralleldisplay on a few boards
2021-08-29 07:33:54 -05:00
7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
6d49a9f0c5
Merge pull request #5205 from jepler/deprecate-vertical-scroll
...
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 12:52:12 -07:00
935888927e
Merge pull request #5196 from dhalbert/samd-audio-fixes
...
improve SAMD audio DMA
2021-08-23 10:27:59 -07:00
379461df7d
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 09:17:59 -05:00
57841dc92b
Merge pull request #5171 from tannewt/unicode_filenames
...
Turn on unicode for FATFS
2021-08-21 16:31:54 -04:00
046372d840
put back some dynossat_edu_obc pins
2021-08-21 16:14:09 -04:00
b8b23c97d9
improve SAMD audio DMA
2021-08-21 14:34:37 -04:00
208ec71372
Merge pull request #5190 from jepler/issue4883
...
samd: diagnose out of range I2C frequency
2021-08-21 08:00:50 +05:30
f6d1caabc9
Merge pull request #5182 from tannewt/fix_imx
...
Check background pending before sleep
2021-08-21 08:00:10 +05:30
26d33658ea
samd: diagnose out of range I2C frequency
...
The frequency divisor is limited to 255, which gives 48MHz/2/255 ~= 94.1kHz as
the lowest speed.
Without this change, values below this cut-off gave higher frequencies instead,
which didn't appear to have any relation to the frequency value requested.
Closes : #4883
2021-08-20 15:22:35 -05:00
9f051ec7bf
Fix usb calibrated SAMD21 builds
2021-08-20 12:45:59 -07:00
5c6e80a2bb
Shrink builds by defining advanced micropython API
...
Also, ignore more pins on SAMD boards and disable EXFAT on others.
2021-08-19 16:49:33 -07:00
d2860b58b0
Check background pending before sleep
...
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.
Fixes #5086 and maybe others.
2021-08-19 12:18:13 -07:00
cabe96e188
canio: Run background tasks while waiting for message reception
...
Closes : #5004
2021-08-18 11:39:40 -05:00
e0ce5ff045
Fix some builds by disabling exfat
2021-08-18 08:22:29 -07:00
5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes
...
Support multiple reports per device in usb_hid
2021-08-17 17:14:28 -04:00
a77e269121
cp_sapling_m0_revb: board.UART not board.uart
...
This is the only board that didn't match the all-uppercase convention for these UART (and more generally, these bus) entries.
2021-08-16 17:07:17 -05:00
f37e1d7bf5
squeeze a couple of boards
2021-08-14 17:36:05 -04:00
3ffab36cdc
Merge remote-tracking branch 'adafruit/main' into fix_samd_timer_leak
2021-08-13 15:20:25 -07:00
de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
fb6b438580
Make `getpass` and `traceback` full build only
...
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.
Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote
2021-08-11 13:43:59 -07:00
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
...
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
2021-08-11 12:19:16 -07:00
7f016ae11e
Fix build with filter to do OR
2021-08-11 12:10:51 -07:00
083960ce90
Fix SAMD51 builds and Prox Trinkey
...
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
ebf0901558
Merge pull request #5079 from dhalbert/debug-audio
...
Fix various RP2040 and SAMD audio issues
2021-08-11 11:19:53 -07:00
b56455ffbb
Allow sleep while paused
2021-08-11 10:48:39 -07:00
67c6932ca2
Reset timers separate from pwmio
...
This prevents timer leakage on builds without pwmio.
Fixes #5057
2021-08-11 09:58:31 -07:00
f0859ac954
Switch SAMD21 ticks to PER event
...
The EVSYS is used to generate an interrupt from the event. This
simplifies timing used in pulseio that conflicted with the
auto-reload countdown.
Fixes #3890
2021-08-10 15:23:45 -07:00
e741330ca8
Consistent pin naming for SparkFun MicroMod processor boards.
2021-08-09 23:10:52 -07:00
93c9d59960
Merge branch 'main' into getpass
2021-08-10 01:00:10 +05:30
2451c788f4
valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad
2021-08-09 09:47:13 -04:00
59b89fdc5c
Fix various audio DMA issues:
...
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`
RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
2021-08-09 09:47:13 -04:00
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
51f8603783
add getpass module
2021-08-09 17:50:28 +05:30
579194a543
Colocated board.LED and D13 together (GCM4)
2021-08-09 05:35:38 +02:00
a15ac65fa0
Add board.LED for Grand Central M4 Express
...
Fixes #5111
2021-08-08 21:43:12 +02:00
063e3946d6
Merge pull request #5094 from jepler/quirc
...
Add qrio: Decode QR codes with quirc lib
2021-08-07 09:30:20 +05:30
be2342f32f
Merge pull request #5072 from microDev1/traceback
...
Add traceback module
2021-08-06 12:10:17 -07:00
821f3d5532
board bdmicro_vina_d51: Add support for MX25L12833F flash chip. Add QSPI activity indicator LED. Add D15-D19 as aliases for the I2S peripheral pins.
2021-08-05 09:14:51 -04:00
ac4b10bcd9
It's "shared-module", not "shared-modules"
2021-08-03 10:37:47 -05:00
d5cdceb9b9
Use all 4 status pixels on neotrinkey too
2021-07-28 14:25:21 -07:00
e9369d50e1
Merge pull request #5067 from tannewt/pulseout_switch
...
Switch to pin, frequency and duty_cycle PulseOut
2021-07-28 14:58:06 -04:00
f371c0a609
add traceback module
2021-07-28 18:06:23 +05:30
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad
...
remove gamepad; deprecate gamepadshift
2021-07-27 11:35:06 -04:00
901a6c27c0
remove gamepad; deprecate gamepadshift
2021-07-26 22:15:09 -04:00
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch
2021-07-26 18:48:59 -07:00
412eb87080
Switch to pin, frequency and duty_cycle PulseOut
...
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0
This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.
Most of the way for #3264
Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
11ca505fdb
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
f3a286a7ea
can we add busdevice and have room?
2021-07-25 14:45:35 -04:00
70cbb4eddb
Support multiple status neopixels
...
Use the 10 neopixels on the playgrounds for status.
Fixes #5039
2021-07-23 15:17:09 -07:00
f84cb94819
Remove OSError(0) and old network modules
...
The newer modules are `socketpool` and `ssl`.
Fixes #3924 , related to #2021 , closes #1880 , closes #2273 , closes #2274
2021-07-21 17:33:40 -07:00
fece0fb432
Fix crash when UART construct fails
...
After the script stops with the exception thrown the final gc_sweep
will call any finalizers and they usually call deinit. deinit on
invalid objects can wreak havoc by changing random memory or
(hopefully) crashing. This fixes ensures the object is deinited
until initialization succeeds and the object is valid.
Do the same fix for I2C and SPI too.
Fixes #4700 and fixes #5005
2021-07-20 17:15:19 -07:00
e042d54702
Fix three boards and xtensa cache key
2021-07-16 11:15:05 -07:00
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
35030fbb30
added pin object to analogout
2021-07-12 20:33:42 -04:00
0e88b77b3e
Merge pull request #4977 from pewpew-game/samd21-filesystem-size
...
Allow changing size of the filesystem on samd21 per board
2021-07-09 11:00:13 -07:00
825a706135
Turn off MIDI on one build, fix name.
2021-07-08 17:31:10 -04:00
92fa1055ef
Allow changing size of the filesystem on samd21 per board
...
As the CircuitPython grows, it may at some point no longer be possible
to squeeze it on some of the flash-less SAMD21 boards, so it would be
good to have the option of shrinking the filesystem size on per-board
basis. This change allows to define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE
inside the board's mpconfigborard.h file.
2021-07-08 22:19:54 +02:00
d886e8041d
Turn off pwmio on meow meow for space reasons
2021-07-01 22:14:37 -04:00
33bbb8b1f4
RP2040 PWMAudioOut: Release DMA channels after play has finished.
2021-07-01 17:36:29 -04:00
1a076d34c9
PewPew M4: use keypad instead of gamepad
...
Since the new keypad module is taking over gamepad functionality,
I'm switching to it. If this works well, I will make the change
for the remaining boards.
2021-06-29 10:36:52 +02:00
b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events
...
keypad: support for vector and matrix key scanning
2021-06-24 10:25:21 -07:00
15fc4c21b6
Fix typo in pin names I2S_SDIN/SDOUT of Wio Terminal
2021-06-24 21:24:23 +09:00
ed41acd879
merge from upstream to fix translations
2021-06-21 08:26:44 -04:00
6dbeb75a4f
Merge pull request #4880 from jepler/esp32s2-imagecapture
...
Esp32s2: implement ParallelImageCapture
2021-06-19 16:17:56 -04:00
db297add67
fix other too-big builds
2021-06-18 13:20:31 -04:00
03adbbca7c
turn off keypad by default on all SAMD21, for now
2021-06-18 12:26:48 -04:00
04b69cde9b
turn off gamepad on most builds;turn off keypad where appropriate
2021-06-17 13:46:45 -04:00
4655a71793
Turn off keypad on some builds to avoid overflow
2021-06-15 14:11:04 -04:00
fd222dd066
Fix typo in Wio Terminal pin board.I2S_BLCK to I2S_BCLK (bit clock)
2021-06-15 20:51:55 +09:00
12d0e65a2a
Space out pin groups.
2021-06-14 15:37:02 -04:00
f96642de25
Add A0 as alias to pot pin.
2021-06-14 15:32:12 -04:00
268717e427
ParallelImageCapture: Switch to taking a list of pins
...
.. adopting validate_pins from RGBMatrix into shared-bindings
.. updating other platforms for API change
2021-06-10 11:15:18 -05:00
26a75f74ec
Merge pull request #4862 from DavePutz/issue_3383
...
Fix for issue #3383 - SAMD5x microcontroller.cpu.voltage
2021-06-09 14:42:27 -05:00
bc34403d71
Removed all references to MICROCONTROLLER_VOLTAGE_DISABLE
2021-06-09 10:46:14 -05:00
72db13fc2d
enable microcontroller.cpu.voltage on SAME54
2021-06-08 10:04:40 -05:00
b2dea8ae0d
Fix for issue #3383 - SAMD51 microcontroller.cpu.voltage
2021-06-05 16:17:14 -05:00
9cde8a2265
MicroMod SAMD51 - correct I2C_INT pin
2021-06-03 06:05:13 -04:00
26c6bd2346
MicroMod SAMD51 - correct SCL2
2021-06-03 05:39:09 -04:00
6e36f30d9f
MicroMod SAMDt1 - correct board nane
2021-06-03 05:36:05 -04:00
2b068414e1
Fix missing comma
...
Doh
2021-06-02 23:13:08 -04:00
0437199706
Fix some pin mappings
...
Conflicts:
ports/atmel-samd/boards/sparkfun_samd51_micromod/pins.c
2021-06-02 22:22:04 -04:00
4c493c86c8
Add Sparkfun MicroMod SAMD51
2021-06-02 22:05:58 -04:00
db1830d62b
Add Sparkfun MicroMod SAMD51
2021-06-02 21:53:23 -04:00
3930440bc5
Fix usb_cdc.enable(console=False, data=True)
2021-06-02 11:29:56 -04:00
892dfa84ed
Merge pull request #4826 from jepler/actions-windows-build
...
Check that select firmwares build on Windows with MSYS2
2021-06-01 13:04:06 -07:00
6b476c19ba
fix formatting
2021-05-29 08:10:10 -05:00
b0dd0e344c
Merge pull request #4772 from EmergReanimator/atmel-samd
...
[resolves #4771 ] DEBUG UART supported on ATMSAME5x
2021-05-28 20:05:06 -06:00
49db85cb3d
Check that select firmwares build on Windows with MSYS2
...
This configuration is used by @ladyada and more often than it should
we've discovered late that a change introduced problems building
there.
By adding this to regular CI, hopefully we learn about and fix these
issues sooner rather than later.
2021-05-28 16:47:29 -05:00
5eb4cc6489
Remove non-product Adafruit boards
2021-05-26 16:01:17 -04:00
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
7805392b9e
Update UART.c
...
Incorporating feedback: https://github.com/adafruit/circuitpython/pull/4772#discussion_r634112839
2021-05-19 20:19:16 +02:00
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
2b64b1d335
[ resolves #4771 ] DEBUG UART supported on ATMSAME5x
2021-05-17 21:22:24 +02:00
9752162508
Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins
...
Update various Trinkey pins and add _pixelbuf
2021-05-15 11:52:33 -04:00
ea0e18d2e0
fix logic for suppressing ja and ko clean builds when not necessary
2021-05-14 23:41:44 -04:00
1e2a945782
Make busio.SPI be NotImplementedError on proxlight to save space
2021-05-14 21:52:54 -04:00
5c33c9d597
Fix SAMD
...
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
990e58902d
add CIRCUITPY_PIXELBUF to all trinkeys; add NeoPixel to prox
2021-05-14 17:09:15 -04:00
6a2ba83e30
Update Rotary Trinkey and Slide Trinkey pins
2021-05-14 15:40:29 -04:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
0eb4b9b982
Merge pull request #4742 from kattni/led
...
Add LED pin to Adafruit boards.
2021-05-10 21:12:02 -04:00
294ef59f27
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
4eb4f14840
Merge pull request #4734 from dhalbert/dynamic-usb-fixes
...
fix HID; fix interface name table creation
2021-05-10 12:55:29 -07:00
44f162bb64
free up PA00 and PA01 on BHB
2021-05-09 10:19:48 -07:00
becff6f93d
restore pulseio to pirkey
2021-05-09 11:33:35 -04:00
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod
2021-05-05 17:51:52 -07:00
843598ec3a
fix more board builds
2021-05-05 18:44:27 -04:00
579cdf30f1
fix more build errors
2021-05-05 16:49:29 -04:00
c37f021791
regularize and shrink many builds
2021-05-05 12:35:41 -04:00
fc8e1c4c2e
address review comments
2021-05-05 12:35:12 -04:00
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
b35fa44c8a
Merge MicroPython 1.12 into CircuitPython
2021-05-03 14:01:18 -07:00
25ccd5d8f1
Merge pull request #4679 from t-ikegami/wio_add_pin_assign
...
Add DAC* and RTL_* pin assignments to Wio Terminal board.
2021-05-03 11:08:28 -07:00
94ed5e0048
Merge pull request #4696 from dhalbert/no-pulseio-on-small-boards
...
Include pulseio only on CIRCUITPY_FULL_BUILD
2021-05-03 09:35:29 -04:00
9ca0e689a5
Merge branch 'main' into wio_add_pin_assign
2021-05-03 09:33:18 -04:00
e475dc8899
Fix broken builds
2021-05-03 00:09:15 -04:00
07dab34294
re-enable for pirkey
2021-05-01 09:32:13 -04:00
dfa7c3d32d
codeformat: Fix handling of `**`
...
After discussing with danh, I noticed that `a/**/b` would not match `a/b`.
After correcting this and re-running "pre-commit run --all", additional
files were reindented, including the codeformat script itself.
2021-04-30 15:30:13 -05:00
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
353e55d710
Merge pull request #4688 from jepler/fix-pixelbuf-subscr
...
objtype: Restore our customized behavior of instance_subscr
2021-04-30 10:45:44 -04:00
be7b2b00a8
uncrustify with newer version of uncrustify
2021-04-30 10:40:12 -04:00
11a9372da3
Set Xtal, Aref, and NC pins to be IGNORE_ed in microcontroller.pin for Wio Terminal.
2021-04-30 13:06:09 +09:00
d79d6ba688
Add I2S_* pin assignments to Wio Terminal board.
2021-04-30 13:03:29 +09:00
b5efce12cd
delete hid .py; undo some debugging changes
2021-04-29 23:05:31 -04:00
5679eb4fd7
Merge pull request #4677 from skerr92/add-cp-sapling-rev-b
...
Add cp sapling rev b
2021-04-29 19:22:49 -05:00
8b611d4b6b
changing mpconfigboard makefile
2021-04-29 16:45:08 -06:00
90bdb25219
ignore some pins to reclaim flash space
2021-04-29 14:36:29 -05:00
6498684f5e
ignore some pins to reclaim flash space
2021-04-29 14:30:31 -05:00
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
555ade7ff3
final change to ja flags i think
2021-04-28 20:42:13 -06:00
8090af07dd
fix ja build issue
2021-04-28 19:14:45 -06:00
0d25b95f0d
Add definitions of PB2[4-9] pins to microcontroller.pin for atmel-samd.
2021-04-29 02:19:34 +09:00
22c4abd28f
Add DAC* and RTL_* pin assignments to Wio Terminal board.
2021-04-28 18:57:21 +09:00
8500e846c6
partially working
2021-04-27 23:53:23 -04:00
e85091193b
adding CP Sapling Rev B
2021-04-27 16:30:44 -06:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
4e1d2fa056
Adding clearer on-board DotStar pin names.
2021-04-27 12:52:24 -04:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
c26e49c2e6
wip: starting to try to compile
2021-04-25 23:17:41 -04:00
de3c5ff976
oh crud, i forgot a semicolon
2021-04-25 16:42:58 -07:00
4bafbca0c3
Trinkeys: Clear neopixels on board reset
2021-04-25 12:58:52 -07:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
ed374a89fb
Merge pull request #4655 from DavePutz/issue_4602
...
Issue 4602 - Correct timing of PulseOut on SAMD21
2021-04-24 10:45:10 -05:00
80e8b4ac14
Merge pull request #4635 from jepler/pcc
...
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-23 13:31:53 -07:00
34c4cc1bd9
samd: Rename dma_{allocate,free} channel
...
These are now used in the (video) parallel capture device as well.
2021-04-23 09:46:33 -05:00
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
0e2431048d
Fix PWMOut on SAMD21
2021-04-20 15:21:05 -05:00
46c9b1bc37
atmel-sam: Use DMA for ParallelImageCapture
...
This allows ctrl-c to interrupt the capture, and ensures we handle
interrupts & background tasks.
2021-04-20 13:52:44 -05:00
d50feebd2c
atmel-sam: Factor out find_sync_event_channel_raise
2021-04-20 13:33:11 -05:00
4dcbdac97e
Complete the 'horizontal_reference' rename
2021-04-20 11:33:32 -05:00
5c5736ee1e
atmel-sam: Allow PWM to go up to cpu_frequency/2
...
24MHz is the nominal external clock to use with OV7670. (My testing
was actually at 16MHz)
2021-04-20 10:22:21 -05:00
99799cded6
imagecapture: implement to review suggestions
2021-04-20 10:21:32 -05:00
2198b1a4df
Update mpconfigboard.h
2021-04-17 20:15:04 -05:00
fc4538f845
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-16 17:18:59 -05:00
b1f4a9a9fd
Merge pull request #4447 from tyomitch/patch-3
...
[synthio] add a simple MidiTrack implementation
2021-04-13 15:09:23 -07:00
9a3f04a1b8
Merge pull request #4599 from dhalbert/neopixel-trinkey-storage
...
Turn storage back on for NeoPixel Trinkey
2021-04-13 12:42:46 -04:00
1163af5d48
Merge pull request #4591 from jepler/same51-modules
...
same51: enable specific modules based on chip family
2021-04-13 11:47:08 -04:00
cc36402a64
turn storage back on
2021-04-13 11:06:59 -04:00
c6ee471b52
Merge branch 'main' of https://github.com/adafruit/circuitpython into patch-3
2021-04-13 00:32:19 -04:00
d136078768
try re-enabling storage
2021-04-12 22:17:20 -04:00
8053d4a7a3
remove neopixels
2021-04-11 22:33:03 -04:00
4f36504aeb
same51: enable specific modules based on chip family
...
closes #4590
2021-04-11 20:07:59 -05:00
Max Holliday
EmergReanimator
Lucian Copeland
Pierre Constantineau
Dan Halbert
Neradoc
microDev
Scott Shawcroft
Jeff Epler
Scott Shawcroft
Dan Halbert
Ryan A. Pavlik
Chris Wilson
Nathan Young
Brian Dean
Kattni
lady ada
BoB LeSuer
Radomir Dopieralski
Tsutomu IKEGAMI
Jeff Epler
root
George White
Ben Bleything
Artyom Skrobov
Jeff Epler
Mark
Seth Kerr
ajs256
anecdata