Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
This commit is contained in:
Scott Shawcroft
GitHub
commit
0632a1e681
|
|
@ -370,6 +370,7 @@ jobs:
|
|||
- "sparkfun_samd21_mini"
|
||||
- "sparkfun_samd51_micromod"
|
||||
- "sparkfun_samd51_thing_plus"
|
||||
- "sparkfun_stm32f405_micromod"
|
||||
- "sparkfun_thing_plus_rp2040"
|
||||
- "spresense"
|
||||
- "stackrduino_m0_pro"
|
||||
|
|
|
|||
|
|
@ -1,8 +1,11 @@
|
|||
#define MICROPY_HW_BOARD_NAME "SparkFun MicroMod SAMD51"
|
||||
#define MICROPY_HW_BOARD_NAME "SparkFun MicroMod SAMD51 Processor"
|
||||
#define MICROPY_HW_MCU_NAME "samd51j20"
|
||||
|
||||
#define CIRCUITPY_MCU_FAMILY samd51
|
||||
|
||||
// Status LED
|
||||
#define MICROPY_HW_LED_STATUS (&pin_PA23)
|
||||
|
||||
// On-board flash
|
||||
#define SPI_FLASH_MOSI_PIN &pin_PA09
|
||||
#define SPI_FLASH_MISO_PIN &pin_PA10
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
LD_FILE = boards/samd51x20-bootloader-external-flash.ld
|
||||
USB_VID = 0x1b4f
|
||||
USB_PID = 0x0020 # Used by uf2 bootloader
|
||||
USB_PRODUCT = "SparkFun MicroMod SAMD51"
|
||||
USB_PRODUCT = "SparkFun MicroMod SAMD51 Processor"
|
||||
USB_MANUFACTURER = "SparkFun Electronics"
|
||||
|
||||
CHIP_VARIANT = SAMD51J20A
|
||||
|
|
|
|||
|
|
@ -1,97 +1,224 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||
* Copyright (c) 2021 Chris Wilson
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
|
||||
// D (digital only) pins (D0,D1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB04) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB05) },
|
||||
// The SparkFun MicroMod spec uses a zero-based peripheral numbering scheme.
|
||||
// The 0th peripheral is the default and the "0" is omitted from the
|
||||
// peripheral name (e.g. "I2C" instead of "I2C0").
|
||||
//
|
||||
// For more details, see https://www.sparkfun.com/micromod#tech-specs
|
||||
|
||||
// A (ADC) pins (A0-A4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB00) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB01) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB02) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PB03) },
|
||||
// MicroMod built-in status LED pin
|
||||
// Requirement from the "Designing with MicroMod" SparkFun article:
|
||||
// "... every Processor Board shall include one status LED connected to a
|
||||
// pin that is not connected to the board edge."
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA23) }, // MicroMod LED (PA23)
|
||||
|
||||
// DAC
|
||||
{ MP_ROM_QSTR(MP_QSTR_DAC), MP_ROM_PTR(&pin_PA02) },
|
||||
// MicroMod USB bus input voltage (+5V) pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_VIN), MP_ROM_PTR() }, // MicroMod USB_VIN (not connected)
|
||||
|
||||
// G (General/BUS) pins (G0-G9)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_PA06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_PA06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PB08) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_PB08) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PB09) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_PB09) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PB10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_PB10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_PB11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_PB12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR(&pin_PB13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G8), MP_ROM_PTR(&pin_PA14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_PA15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_PB31) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_PB30) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_PB14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_PB14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_PB15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_G11), MP_ROM_PTR(&pin_PB15) },
|
||||
// MicroMod +3.3V enable pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_P3V3_EN), MP_ROM_PTR(&pin_PA19) }, // MicroMod 3.3V_EN (PA19)
|
||||
|
||||
// PWM pins (PWM0, PWM1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_PB01) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_PB02) },
|
||||
// MicroMod battery voltage sense pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATT_VIN3), MP_ROM_PTR(&pin_PB03) }, // MicroMod BATT_VIN/3 (PB03)
|
||||
|
||||
// AUD (audio)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_MCLK), MP_ROM_PTR(&pin_PB17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_OUT), MP_ROM_PTR(&pin_PA21) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_IN), MP_ROM_PTR(&pin_PA22) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_LRCLK), MP_ROM_PTR(&pin_PA20) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_BCLK), MP_ROM_PTR(&pin_PB16) },
|
||||
// MicroMod reset pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_RESET), MP_ROM_PTR() }, // MicroMod RESET# (SAMD51 has a dedicated HW RESETN pin)
|
||||
|
||||
// I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_PA17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA16) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_PA16) },
|
||||
// MicroMod boot pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR() }, // MicroMod BOOT (not connected)
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_PA18) },
|
||||
// MicroMod USB device pins
|
||||
// USB device is always used internally by CircuitPython, so skip creating
|
||||
// the pin objects for it. See explicit ignores in mpconfigboard.h.
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DM), MP_ROM_PTR(&pin_PA24) }, // MicroMod USB_D- (PA24)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DP), MP_ROM_PTR(&pin_PA25) }, // MicroMod USB_D+ (PA25)
|
||||
|
||||
// I2C2
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_PA13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_PA12) },
|
||||
// MicroMod USB host pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_USBHOST_DM), MP_ROM_PTR() }, // MicroMod USBHOST_D- (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USBHOST_DP), MP_ROM_PTR() }, // MicroMod USBHOST_D+ (not connected)
|
||||
|
||||
// SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_PA06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_PA04) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA04) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA05) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_PA07) },
|
||||
// MicroMod CAN pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAN_RX), MP_ROM_PTR(&pin_PB15) }, // MicroMod CAN_RX (PB15)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAN_TX), MP_ROM_PTR(&pin_PB14) }, // MicroMod CAN_TX (PB14)
|
||||
|
||||
// Status LED
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA23) },
|
||||
// Note: MicroMod UART (UART0) is not present in the edge connector pinout
|
||||
// because the primary debug serial port is exposed as a virtual serial port
|
||||
// over USB.
|
||||
|
||||
// UART
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB30) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX1), MP_ROM_PTR(&pin_PB30) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB31) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX1), MP_ROM_PTR(&pin_PB31) },
|
||||
// MicroMod UART1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX1), MP_ROM_PTR(&pin_PB31) }, // MicroMod UART_TX1 | CircuitPython TX (PB31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX1), MP_ROM_PTR(&pin_PB30) }, // MicroMod UART_RX1 | CircuitPython RX (PB30)
|
||||
// { MP_ROM_QSTR(MP_QSTR_UART_RTS1), MP_ROM_PTR() }, // MicroMod RTS1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_UART_CTS1), MP_ROM_PTR() }, // MicroMod CTS1 (not connected)
|
||||
|
||||
// UART2
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX2), MP_ROM_PTR(&pin_PA13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX2), MP_ROM_PTR(&pin_PA12) },
|
||||
// CircuitPython default UART pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB31) }, // CircuitPython TX | MicroMod UART_TX1 (PB31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB30) }, // CircuitPython RX | MicroMod UART_RX1 (PB30)
|
||||
|
||||
// MicroMod UART2 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX2), MP_ROM_PTR(&pin_PA12) }, // MicroMod UART_TX2 (PA12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX2), MP_ROM_PTR(&pin_PA13) }, // MicroMod UART_RX2 (PA13)
|
||||
|
||||
// Board objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
// MicroMod I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_PA17) }, // MicroMod I2C_SDA | CircuitPython SDA (PA17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_PA16) }, // MicroMod I2C_SCL | CircuitPython SCL (PA16)
|
||||
|
||||
// CircuitPython default I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA17) }, // CircuitPython SDA | MicroMod I2C_SDA (PA17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA16) }, // CircuitPython SCL | MicroMod I2C_SCL (PA16)
|
||||
|
||||
// MicroMod I2C interrupt pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_PA18) }, // MicroMod I2C_INT (PA18)
|
||||
|
||||
// MicroMod I2C1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA1), MP_ROM_PTR(&pin_PA13) }, // MicroMod I2C_SDA1 (PA13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL1), MP_ROM_PTR(&pin_PA12) }, // MicroMod I2C_SCL1 (PA12)
|
||||
|
||||
// MicroMod SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO), MP_ROM_PTR(&pin_PA06) }, // MicroMod SPI_CIPO | CircuitPython CIPO (PA06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_PA06) }, // MicroMod SPI_MISO | CircuitPython MISO (PA06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI), MP_ROM_PTR(&pin_PA04) }, // MicroMod SPI_COPI | CircuitPython COPI | LED_DAT (PA04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_PA04) }, // MicroMod SPI_MOSI | CircuitPython MOSI (PA04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_PA05) }, // MicroMod SPI_SCK | CircuitPython SCK | LED_CLK (PA05)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS), MP_ROM_PTR(&pin_PA07) }, // MicroMod SPI_CS | CircuitPython CS (PA07)
|
||||
|
||||
// CircuitPython default SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_PA06) }, // CircuitPython CIPO | MicroMod SPI_CIPO (PA06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA06) }, // CircuitPython MISO | MicroMod SPI_MISO (PA06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_PA04) }, // CircuitPython COPI | MicroMod SPI_COPI | LED_DAT (PA04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA04) }, // CircuitPython MOSI | MicroMod SPI_MOSI (PA04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA05) }, // CircuitPython SCK | MicroMod SPI_SCK | LED_CLK (PA05)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_PA07) }, // CircuitPython CS | MicroMod SPI_CS (PA07)
|
||||
|
||||
// MicroMod 2-wire serial LED pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_DAT), MP_ROM_PTR(&pin_PA04) }, // MicroMod LED_DAT | SPI_COPI (PA04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_CLK), MP_ROM_PTR(&pin_PA05) }, // MicroMod LED_CLK | SPI_SCK (PA05)
|
||||
|
||||
// MicroMod SDIO pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR() }, // MicroMod SDIO_SCK | SPI_SCK1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR() }, // MicroMod SDIO_CMD | SPI_COPI1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA0), MP_ROM_PTR() }, // MicroMod SDIO_DATA0 | SPI_CIPO1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA1), MP_ROM_PTR() }, // MicroMod SDIO_DATA1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA2), MP_ROM_PTR() }, // MicroMod SDIO_DATA2 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA3), MP_ROM_PTR() }, // MicroMod SDIO_DATA3 | SPI_CS1 (not connected)
|
||||
|
||||
// MicroMod SPI1 pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_CIPO1), MP_ROM_PTR() }, // MicroMod SPI_CIPO1 | SDIO_DATA0 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_MISO1), MP_ROM_PTR() }, // MicroMod SPI_MISO1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_COPI1), MP_ROM_PTR() }, // MicroMod SPI_COPI1 | SDIO_CMD (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_MOSI1), MP_ROM_PTR() }, // MicroMod SPI_MOSI1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_SCK1), MP_ROM_PTR() }, // MicroMod SPI_SCK1 | SDIO_SCK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_CS1), MP_ROM_PTR() }, // MicroMod SPI_CS1 | SDIO_DATA3 (not connected)
|
||||
|
||||
// MicroMod audio pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_MCLK), MP_ROM_PTR(&pin_PB17) }, // MicroMod AUD_MCLK (PB17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_OUT), MP_ROM_PTR(&pin_PA21) }, // MicroMod AUD_OUT | I2S_OUT | PCM_OUT | CAM_MCLK (PA21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_IN), MP_ROM_PTR(&pin_PA22) }, // MicroMod AUD_IN | I2S_IN | PCM_IN | CAM_PCLK (PA22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_LRCLK), MP_ROM_PTR(&pin_PA20) }, // MicroMod AUD_LRCLK | I2S_WS | PCM_SYNC | PDM_DATA (PA20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_BCLK), MP_ROM_PTR(&pin_PB16) }, // MicroMod AUD_BCLK | I2S_SCK | PCM_CLK | PDM_CLK (PB16)
|
||||
|
||||
// MicroMod I2S pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_OUT), MP_ROM_PTR(&pin_PA21) }, // MicroMod I2S_OUT | AUD_OUT | PCM_OUT | CAM_MCLK (PA21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_IN), MP_ROM_PTR(&pin_PA22) }, // MicroMod I2S_IN | AUD_IN | PCM_IN | CAM_PCLK (PA22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_WS), MP_ROM_PTR(&pin_PA20) }, // MicroMod I2S_WS | AUD_LRCLK | PCM_SYNC | PDM_DATA (PA20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_PB16) }, // MicroMod I2S_SCK | AUD_BCLK | PCM_CLK | PDM_CLK (PB16)
|
||||
|
||||
// MicroMod PCM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_OUT), MP_ROM_PTR(&pin_PA21) }, // MicroMod PCM_OUT | AUD_OUT | I2S_OUT | CAM_MCLK (PA21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_IN), MP_ROM_PTR(&pin_PA22) }, // MicroMod PCM_IN | AUD_IN | I2S_IN | CAM_PCLK (PA22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_SYNC), MP_ROM_PTR(&pin_PA20) }, // MicroMod PCM_SYNC | AUD_LRCLK | I2S_WS | PDM_DATA (PA20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_CLK), MP_ROM_PTR(&pin_PB16) }, // MicroMod PCM_CLK | AUD_BCLK | I2S_SCK | PDM_CLK (PB16)
|
||||
|
||||
// MicroMod PDM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_DATA), MP_ROM_PTR(&pin_PA20) }, // MicroMod PDM_DATA | AUD_LRCLK | I2S_WS | PCM_SYNC (PA20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_CLK), MP_ROM_PTR(&pin_PB16) }, // MicroMod PDM_CLK | AUD_BCLK | I2S_SCK | PCM_CLK (PB16)
|
||||
|
||||
// MicroMod SWD pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SWDIO), MP_ROM_PTR(&pin_PA31) }, // MicroMod SWDIO (PA31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SWCLK), MP_ROM_PTR(&pin_PA30) }, // MicroMod SWDCK (PA30)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWO), MP_ROM_PTR() }, // MicroMod SWO | G11 (not connected)
|
||||
|
||||
// MicroMod ADC pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, // MicroMod A0 (PA02)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB00) }, // MicroMod A1 (PB00)
|
||||
|
||||
// MicroMod PWM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_PB01) }, // MicroMod PWM0 (PB01)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_PB02) }, // MicroMod PWM1 (PB02)
|
||||
|
||||
// MicroMod digital pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB04) }, // MicroMod D0 (PB04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB05) }, // MicroMod D1 | CAM_TRIG (PB05)
|
||||
|
||||
// MicroMod general purpose pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_PB06) }, // MicroMod G0 | BUS0 (PB06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_PB07) }, // MicroMod G1 | BUS1 (PB07)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_PB08) }, // MicroMod G2 | BUS2 (PB08)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_PB09) }, // MicroMod G3 | BUS3 (PB09)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_PB10) }, // MicroMod G4 | BUS4 (PB10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_PB11) }, // MicroMod G5 | BUS5 (PB11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_PB12) }, // MicroMod G6 | BUS6 (PB12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR(&pin_PB13) }, // MicroMod G7 | BUS7 (PB13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G8), MP_ROM_PTR(&pin_PA14) }, // MicroMod G8 (PA14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_PA15) }, // MicroMod G9 | ADC_D- | CAM_HSYNC (PA15)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR() }, // MicroMod G10 | ADC_D+ | CAM_VSYNC (not connected)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G11), MP_ROM_PTR(&pin_PA27) }, // MicroMod G11 | SWO (PA27)
|
||||
|
||||
// MicroMod 8-bit bus pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS0), MP_ROM_PTR(&pin_PB06) }, // MicroMod BUS0 | G0 (PB06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS1), MP_ROM_PTR(&pin_PB07) }, // MicroMod BUS1 | G1 (PB07)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS2), MP_ROM_PTR(&pin_PB08) }, // MicroMod BUS2 | G2 (PB08)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS3), MP_ROM_PTR(&pin_PB09) }, // MicroMod BUS3 | G3 (PB09)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS4), MP_ROM_PTR(&pin_PB10) }, // MicroMod BUS4 | G4 (PB10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS5), MP_ROM_PTR(&pin_PB11) }, // MicroMod BUS5 | G5 (PB11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS6), MP_ROM_PTR(&pin_PB12) }, // MicroMod BUS6 | G6 (PB12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS7), MP_ROM_PTR(&pin_PB13) }, // MicroMod BUS7 | G7 (PB13)
|
||||
|
||||
// MicroMod differential ADC input pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DM), MP_ROM_PTR(&pin_PA15) }, // MicroMod ADC_D- | G9 | CAM_HSYNC (PA15)
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DP), MP_ROM_PTR() }, // MicroMod ADC_D+ | G10 | CAM_VSYNC (not connected)
|
||||
|
||||
// MicroMod camera pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_MCLK), MP_ROM_PTR(&pin_PA21) }, // MicroMod CAM_MCLK | AUD_OUT | I2S_OUT | PCM_OUT (PA21)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_PCLK), MP_ROM_PTR(&pin_PA22) }, // MicroMod CAM_PCLK | AUD_IN | I2S_IN | PCM_IN (PA22)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_TRIG), MP_ROM_PTR(&pin_PB05) }, // MicroMod CAM_TRIG | D1 (PB05)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_HSYNC), MP_ROM_PTR(&pin_PA15 }, // MicroMod CAM_HSYNC | ADC_D- | G9 (PA15)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR() }, // MicroMod CAM_VSYNC | ADC_D+ | G10 (not connected)
|
||||
|
||||
// Module-specific aliases (not part of the MicroMod spec)
|
||||
{ MP_ROM_QSTR(MP_QSTR_HOST_ENABLE), MP_ROM_PTR(&pin_PA27) }, // HOST_ENABLE | G11 | SWO (PA27)
|
||||
|
||||
// CircuitPython board objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, // CircuitPython I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, // CircuitPython SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, // CircuitPython UART
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
|
||||
|
|
|
|||
|
|
@ -10,56 +10,64 @@ We've also routed two I<sup>2</sup>C buses, 2 SPI buses, eleven GPIO, dedicated
|
|||
|
||||
CircuitPython pin definitions, while simialr to other boards represent a slight departure from just the typical `A` and `D` pin definitions. The majority of general pins are labled as `G` (or alternatively, `BUS`,) as the MicroMod system they build on uses those names to specify pins that may not be specficially analog or digital.
|
||||
|
||||
This can be somewhat confusing, especially around the analog pins. Here's a quick pin-map. This pin map will use the label either on the [SparkFun MicroMod ATP Carrier Board](https://www.sparkfun.com/products/16885), or the pin name on the [graphical datasheet](https://cdn.sparkfun.com/assets/learn_tutorials/1/4/0/1/MicroMod_nRF52840_v1.0_Graphical_Datasheet.pdf). Some of the aditional aliases are just names to make naming consistent (e.g.: RTS/CTS), but they also can refer to additional functionality a pin may have (e.g.: NFC pins)
|
||||
This can be somewhat confusing, especially around the analog pins. Here's a quick pin-map:
|
||||
|
||||
MicroMod Pin # | ATP Pin Label | Pin Definition | Additional Definitons | Pin/Port Reference | Notes
|
||||
:--------------|:--------------|:--------------|:-----------------------|:-------------------|:------
|
||||
8 | G11 | | | (Not Connected) |
|
||||
10 | D0 | D0 | | P0_27 |
|
||||
11 | BOOT | BOOT | BUTTON1 | P0_07 |
|
||||
12 | SDA | SDA | | P0_08 |
|
||||
13 | RTS1 | RTS | RTS1 | P1_02 |
|
||||
14 | SCL | SCL | | P0_11 |
|
||||
15 | CTS1 | CTS | CTS1 | P1_09 |
|
||||
16 | /I2C INT | I2C_INT | P0_15 |
|
||||
17 | TX | TX | TX1 | P1_03 |
|
||||
18 | D1 | D1 | CAM_TRIG | P1_08 |
|
||||
19 | RX | RX | RX1 | P1_10 |
|
||||
20 | RX2 | RX2 | | P1_05 |
|
||||
22 | TX2 | TX2 | | P1_07 |
|
||||
32 | PWM0 | PWM0 | P0_06 |
|
||||
34 | A0 | A0 | ADC0 | P0_04 | Attached to AIN2
|
||||
38 | A1 | A1 | ADC1 | P0_05 | Attached to AIN3
|
||||
11 | BOOT | BOOT | | P0_07 |
|
||||
12 | SDA | I2C_SDA | SDA | P0_08 |
|
||||
13 | RTS1 | UART_RTS1 | | P1_02 |
|
||||
14 | SCL | I2C_SCL | SCL | P0_11 |
|
||||
15 | CTS1 | UART_CTS1 | | P1_09 |
|
||||
16 | /I2C INT | I2C_INT | |P0_15|
|
||||
17 | TX | UART_TX1 | TX | P1_03 |
|
||||
18 | D1 | D1 | | P1_08 |
|
||||
19 | RX | UART_RX1 | RX | P1_10 |
|
||||
20 | RX2 | UART_RX2 | | P1_05 |
|
||||
22 | TX2 | UART_TX2 | | P1_07 |
|
||||
32 | PWM0 | PWM0 | |P0_06|
|
||||
34 | A0 | A0 | | P0_04 | Attached to AIN2
|
||||
38 | A1 | A1 | | P0_05 | Attached to AIN3
|
||||
40 | G0 | G0 | BUS0 | P0_29 | Attached to AIN5
|
||||
42 | G1 | G1 | BUS1 | P0_03 | Attached to AIN1
|
||||
44 | G2 | G2 | BUS2 | P1_13 |
|
||||
46 | G3 | G3 | BUS3 | P1_12 |
|
||||
47 | PWM1 | PWM1 | P0_16 |
|
||||
47 | PWM1 | PWM1 | |P0_16|
|
||||
48 | G4 | G4 | BUS4 | P1_11 |
|
||||
49 | BATT_VIN | BATT_VIN3 | | P0_30 | Attached to AIN6, will be battery voltage / 3. |
|
||||
49 | BATT_VIN | BATT_VIN3 | | P0_30 | Attached to AIN6, will be battery voltage / 3.
|
||||
50 | PDM_CLK | PDM_CLK | | P0_25 |
|
||||
51 | SDA1 | SDA1 | | P1_01 |
|
||||
51 | SDA1 | I2C_SDA1 | | P1_01 |
|
||||
52 | PDM_DATA | PDM_DATA | | P0_26 |
|
||||
53 | SCL1 | SCL1 | | P0_24 |
|
||||
55 | /CS | CS | | P0_20 |
|
||||
57 | SCK | SCK | | P0_28 | Attached to AIN4
|
||||
59 | COPI | COPI | MOSI | P0_31 | Attached to AIN7
|
||||
61 | CIPO | CIPO | MISO | P0_02 |
|
||||
63 | G10 | G10 | NFC2, ADC_DP, CAM_VSYNC | P0_10 | Attached to NFC2
|
||||
65 | G9 | G9 | NFC1, ADC_DM, CAM_HSYNC | P0_09 | Attached to NFC1
|
||||
53 | SCL1 | I2C_SCL1 | | P0_24 |
|
||||
55 | /CS | SPI_CS | | P0_20 |
|
||||
57 | SCK | SPI_SCK | LED_CLK | P0_28 | Attached to AIN4
|
||||
59 | COPI | SPI_COPI | SPI_MOSI, LED_DAT | P0_31 | Attached to AIN7
|
||||
60 | SCK1 | SDIO_SCK | SPI_SCK1 | |
|
||||
61 | CIPO | SPI_CIPO | SPI_MISO | P0_02 |
|
||||
62 | COPI1 | SDIO_CMD | SPI_COPI1 | |
|
||||
63 | G10 | G10 | | P0_10 | Attached to NFC2
|
||||
64 | CIPO1 | SDIO_DATA0 | SPI_CIPO1 | |
|
||||
65 | G9 | G9 | | P0_09 | Attached to NFC1
|
||||
66 | DAT1 | SDIO_DATA1 | | |
|
||||
67 | G8 | G8 | | P1_14 |
|
||||
68 | DAT2 | SDIO_DATA2 | | |
|
||||
69 | G7 | G7 | BUS7 | P1_04 |
|
||||
70 | CS1 | SDIO_DATA3 | SPI_CS1 | |
|
||||
71 | G6 | G6 | BUS6 | P1_06 |
|
||||
73 | G5 | G5 | BUS5 | P0_15 |
|
||||
|
||||
## Peripheral Naming
|
||||
|
||||
CircuitPython attempts to stay in line with the naming of the serial peripheral naming in the MicroMod system. The bare UART pins are also named <pin>1. The UART 2 pins are named <pin>2. However, the I2C names on MicroMod are <I2C pin> and <I2C pin>1. Perhaps this will change in the future, but as of [Interface v1](https://cdn.sparkfun.com/assets/learn_tutorials/1/2/0/6/SparkFun_MicroMod_Interface_v1.0_-_Pin_Descriptions.pdf), it may lead to some confusion.
|
||||
The SparkFun MicroMod spec uses a zero-based peripheral numbering scheme. The 0th peripheral is the default and the "0" is omitted from the peripheral name. For example, the first I2C peripheral is named `I2C` (instead of `I2C0`) and the second I2C peripheral is named `I2C1`. Note: MicroMod `UART` is not present in the edge connector pinout because the primary debug serial port (i.e.`UART0`) is exposed as a virtual serial port over USB. As a result, the first UART peripheral in the edge connector pinout is `UART1` and the second UART peripheral is `UART2`.
|
||||
|
||||
For more details, see https://www.sparkfun.com/micromod#tech-specs.
|
||||
|
||||
|
||||
## Bootloader Notes
|
||||
|
||||
The MicroMod nRF52840 Processor needs to have the [Adafruit nRF52 UF2 bootloader](https://github.com/adafruit/Adafruit_nRF52_Bootloader/pull/194) flashed on it. [[TODO: LINK TO BUILD]]
|
||||
The MicroMod nRF52840 Processor needs to have the [Adafruit nRF52 UF2 bootloader](https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases/latest) flashed on it.
|
||||
|
||||
## Hardware Reference
|
||||
|
||||
|
|
|
|||
|
|
@ -27,9 +27,12 @@
|
|||
|
||||
#include "nrfx/hal/nrf_gpio.h"
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "SparkFun MicroMod nRF52840"
|
||||
#define MICROPY_HW_BOARD_NAME "SparkFun MicroMod nRF52840 Processor"
|
||||
#define MICROPY_HW_MCU_NAME "nRF52840"
|
||||
|
||||
// Status LED
|
||||
#define MICROPY_HW_LED_STATUS (&pin_P0_13)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_P0_11)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_P0_08)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
USB_VID = 0x1B4F
|
||||
USB_PID = 0x0021
|
||||
USB_PRODUCT = "SFE_nRF52840_MicroMod"
|
||||
USB_PRODUCT = "SparkFun MicroMod nRF52840 Processor"
|
||||
USB_MANUFACTURER = "SparkFun Electronics"
|
||||
|
||||
MCU_CHIP = nrf52840
|
||||
|
|
|
|||
|
|
@ -1,113 +1,221 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||
* Copyright (c) 2021 Chris Wilson
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
// D pins (D0-D1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_P0_27) }, // 0.27 - D0
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_P1_08) }, // 1.08 - D1 | CAM_TRIG
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_TRIG), MP_ROM_PTR(&pin_P1_08) }, // CAM_TRIG alias
|
||||
// The SparkFun MicroMod spec uses a zero-based peripheral numbering scheme.
|
||||
// The 0th peripheral is the default and the "0" is omitted from the
|
||||
// peripheral name (e.g. "I2C" instead of "I2C0").
|
||||
//
|
||||
// For more details, see https://www.sparkfun.com/micromod#tech-specs
|
||||
|
||||
// A pins (A0-A1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_04) }, // 0.04 - A0 | ADC0 (AIN2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC0), MP_ROM_PTR(&pin_P0_04) }, // ADC0 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_05) }, // 0.05 - A1 | ADC1 (AIN3)
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC1), MP_ROM_PTR(&pin_P0_05) }, // ADC1 alias
|
||||
// MicroMod built-in status LED pin
|
||||
// Requirement from the "Designing with MicroMod" SparkFun article:
|
||||
// "... every Processor Board shall include one status LED connected to a
|
||||
// pin that is not connected to the board edge."
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_P0_13) }, // MicroMod LED (P0.13)
|
||||
|
||||
// G pins (G0-G11, G11 NC)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_P0_29) }, // 0.29 - G0 | GPIO0 | BUS0 (AIN5)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS0), MP_ROM_PTR(&pin_P0_29) }, // BUS0 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_P0_03) }, // 0.03 - G1 | GPIO1 | BUS1 (AIN1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS1), MP_ROM_PTR(&pin_P0_03) }, // BUS1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_P1_13) }, // 1.13 - G2 | GPIO2 | BUS2
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS2), MP_ROM_PTR(&pin_P1_13) }, // BUS2 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_P1_12) }, // 1.12 - G3 | GPIO3 | BUS3
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS3), MP_ROM_PTR(&pin_P1_12) }, // BUS3 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_P1_11) }, // 1.11 - G4 | GPIO4 | BUS4
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS4), MP_ROM_PTR(&pin_P1_11) }, // BUS4 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_P0_17) }, // 0.17 - G5 | GPIO5 | BUS5
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS5), MP_ROM_PTR(&pin_P0_17) }, // BUS5 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_P1_06) }, // 1.06 - G6 | GPIO6 | BUS6
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS6), MP_ROM_PTR(&pin_P1_06) }, // BUS6 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR(&pin_P1_04) }, // 1.04 - G7 | GPIO7 | BUS7
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS7), MP_ROM_PTR(&pin_P1_04) }, // BUS7 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G8), MP_ROM_PTR(&pin_P1_14) }, // 1.14 - G8 | GPIO8
|
||||
{ MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_P0_09) }, // 0.09 - G9 | GPIO9/NFC1 | ADC_D- | CAM_HSYNC (NFC1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_NFC1), MP_ROM_PTR(&pin_P0_09) }, // NFC1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC_DM), MP_ROM_PTR(&pin_P0_09) }, // ADC_DM alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_HSYNC), MP_ROM_PTR(&pin_P0_09) }, // CAM_HSYNC alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_P0_10) }, // 0.10 - G10 | GPIO10/NFC2 | ADC_D+ | CAM_VSYNC (NFC2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_NFC2), MP_ROM_PTR(&pin_P0_10) }, // NFC2 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC_DP), MP_ROM_PTR(&pin_P0_10) }, // ADC_DP alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_P0_10) }, // CAM_VSYNC alias
|
||||
// NC - G11
|
||||
// MicroMod USB bus input voltage (+5V) pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_VIN), MP_ROM_PTR() }, // MicroMod USB_VIN (MDBT50Q-P1M has a dedicated HW VBUS pin)
|
||||
|
||||
// PWM pins (PWM0-PWM1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_P0_06) }, // 0.06 - PWM0
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_P0_16) }, // 0.16 - PWM1
|
||||
// MicroMod +3.3V enable pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_P3V3_EN), MP_ROM_PTR(&pin_P1_15) }, // MicroMod 3.3V_EN (P1.15)
|
||||
|
||||
// PDM
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_CLK), MP_ROM_PTR(&pin_P0_25) }, // 0.25 - PDM_CLK | AUD_BCLK
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_DATA), MP_ROM_PTR(&pin_P0_26) }, // 0.26 - PDM_DATA | AUD_LRCLK
|
||||
// MicroMod battery voltage sense pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATT_VIN3), MP_ROM_PTR(&pin_P0_30) }, // MicroMod BATT_VIN/3 (P0.30)
|
||||
|
||||
// Battery Voltage Monitor
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATT_VIN3), MP_ROM_PTR(&pin_P0_30) }, // 0.30 - BATT_VIN/3 (AIN6)
|
||||
// MicroMod reset pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_RESET), MP_ROM_PTR(&pin_P0_18) }, // MicroMod RESET# (P0.18)
|
||||
|
||||
// I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_08) }, // 0.08 - SDA
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_11) }, // 0.11 - SCL (TRACEDATA2)
|
||||
// MicroMod boot pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_P0_07) }, // MicroMod BOOT (P0.07)
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_P0_15) }, // 0.15 - I2C_INT
|
||||
// MicroMod USB device pins
|
||||
// USB device is always used internally by CircuitPython, so skip creating
|
||||
// the pin objects for it.
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DM), MP_ROM_PTR() }, // MicroMod USB_D- (MDBT50Q-P1M has a dedicated HW D- pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DP), MP_ROM_PTR() }, // MicroMod USB_D+ (MDBT50Q-P1M has a dedicated HW D+ pin)
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_P1_01) }, // 1.01 - SDA1
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_P0_24) }, // 0.24 - SCL1
|
||||
// MicroMod USB host pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_USBHOST_DM), MP_ROM_PTR() }, // MicroMod USBHOST_D- (not supported)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USBHOST_DP), MP_ROM_PTR() }, // MicroMod USBHOST_D+ (not supported)
|
||||
|
||||
// SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_P0_02) }, // 0.02 - CIPO | SPI_CIPO
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P0_02) }, // MISO alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_P0_31) }, // 0.31 - COPI | SPI_COPI (AIN7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P0_31) }, // MOSI alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_28) }, // 0.28 - SCK | SPI_SCK (AIN4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_P0_20) }, // 0.20 - /CS | SPI_/CS
|
||||
// MicroMod CAN pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAN_RX), MP_ROM_PTR() }, // MicroMod CAN_RX (not supported)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAN_TX), MP_ROM_PTR() }, // MicroMod CAN_TX (not supported)
|
||||
|
||||
// QSPI, used by flash on this board, but is broken out
|
||||
// on the MicroMod connector, to to the SDIO pins.
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR(&pin_P0_19) }, // 0.00 - SDIO SCK | Used as: QSPI flash SCK
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK1), MP_ROM_PTR(&pin_P0_19) }, // SPI_SCK1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR(&pin_P0_14) }, // 0.00 - SDIO CMD | Used as: QSPI flash D0 (or SDI)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI1), MP_ROM_PTR(&pin_P0_14) }, // SPI_COPI1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA0), MP_ROM_PTR(&pin_P0_21) },// 0.00 - SDIO DATA0 | Used as: QSPI flash D1 (or SDO)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO1), MP_ROM_PTR(&pin_P0_21) }, // SPI_CIPO1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA1), MP_ROM_PTR(&pin_P0_22) },// 0.00 - SDIO DATA1 | Unused for flash.
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA2), MP_ROM_PTR(&pin_P0_23) },// 0.00 - SDIO DATA2 | Used as: QSPI flash D2
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA3), MP_ROM_PTR(&pin_P1_00) },// 0.00 - SDIO DATA3 | Use das: QSPI flash D3 (or /HOLD)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS1), MP_ROM_PTR(&pin_P1_00) }, // SPI_CS1 alias
|
||||
// Note: MicroMod UART (UART0) is not present in the edge connector pinout
|
||||
// because the primary debug serial port is exposed as a virtual serial port
|
||||
// over USB.
|
||||
|
||||
// Reset Pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_RESET), MP_ROM_PTR(&pin_P1_14) }, // 0.18 - /RESET (NRESET)
|
||||
// MicroMod UART1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX1), MP_ROM_PTR(&pin_P1_03) }, // MicroMod UART_TX1 | CircuitPython TX (P1.03)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX1), MP_ROM_PTR(&pin_P1_10) }, // MicroMod UART_RX1 | CircuitPython RX (P1.10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RTS1), MP_ROM_PTR(&pin_P1_02) }, // MicroMod RTS1 (P1.02)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_CTS1), MP_ROM_PTR(&pin_P1_09) }, // MicroMod CTS1 (P1.09)
|
||||
|
||||
// LED
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_P0_13) }, // 0.13 - LED_BUILTIN | STAT | Blue LED
|
||||
// CircuitPython default UART pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P1_03) }, // CircuitPython TX | MicroMod UART_TX1 (P1.03)
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P1_10) }, // CircuitPython RX | MicroMod UART_RX1 (P1.10)
|
||||
|
||||
// Button
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUTTON1), MP_ROM_PTR(&pin_P0_07) }, // 0.07 - /BOOT [Active Low] (TRACECLK) - Is button on carriers.
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_P0_07) }, // BOOT alias
|
||||
// MicroMod UART2 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX2), MP_ROM_PTR(&pin_P1_07) }, // MicroMod UART_TX2 (P1.07)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX2), MP_ROM_PTR(&pin_P1_05) }, // MicroMod UART_RX2 (P1.05)
|
||||
|
||||
// UART
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P1_10) }, // 1.10 - UART RX | RX1
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX1), MP_ROM_PTR(&pin_P1_10) }, // RX1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P1_03) }, // 1.03 - UART TX | TX1
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX1), MP_ROM_PTR(&pin_P1_03) }, // TX1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_CTS), MP_ROM_PTR(&pin_P1_09) }, // 1.09 - UART CTS | CTS1 (TRACEDATA3)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CTS1), MP_ROM_PTR(&pin_P1_09) }, // CTS1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_RTS), MP_ROM_PTR(&pin_P1_02) }, // 1.02 - UART RTS | RTS1
|
||||
{ MP_ROM_QSTR(MP_QSTR_RTS1), MP_ROM_PTR(&pin_P1_02) }, // RTS1 alias
|
||||
// MicroMod I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_P0_08) }, // MicroMod I2C_SDA (P0.08)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_P0_11) }, // MicroMod I2C_SCL (P0.11)
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX2), MP_ROM_PTR(&pin_P1_05) }, // 1.05 - UART RX | RX2
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX2), MP_ROM_PTR(&pin_P1_07) }, // 1.07 - UART TX | TX2
|
||||
// CircuitPython default I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_08) }, // CircuitPython SDA | MicroMod I2C_SDA (P0.08)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_11) }, // CircuitPython SCL | MicroMod I2C_SCL (P0.11)
|
||||
|
||||
// Board Objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
// MicroMod I2C interrupt pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_P0_15) }, // MicroMod I2C_INT (P0.15)
|
||||
|
||||
// MicroMod I2C1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA1), MP_ROM_PTR(&pin_P1_01) }, // MicroMod I2C_SDA1 (P1.01)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL1), MP_ROM_PTR(&pin_P0_24) }, // MicroMod I2C_SCL1 (P0.24)
|
||||
|
||||
// MicroMod SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO), MP_ROM_PTR(&pin_P0_02) }, // MicroMod SPI_CIPO | CircuitPython CIPO (P0.02)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_P0_02) }, // MicroMod SPI_MISO | CircuitPython MISO (P0.02)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI), MP_ROM_PTR(&pin_P0_31) }, // MicroMod SPI_COPI | CircuitPython COPI | LED_DAT (P0.31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_P0_31) }, // MicroMod SPI_MOSI | CircuitPython MOSI (P0.31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_P0_28) }, // MicroMod SPI_SCK | CircuitPython SCK | LED_CLK (P0.28)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS), MP_ROM_PTR(&pin_P0_20) }, // MicroMod SPI_CS | CircuitPython CS (P0.20)
|
||||
|
||||
// CircuitPython default SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_P0_02) }, // CircuitPython CIPO | MicroMod SPI_CIPO (P0.02)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P0_02) }, // CircuitPython MISO | MicroMod SPI_MISO (P0.02)
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_P0_31) }, // CircuitPython COPI | MicroMod SPI_COPI | LED_DAT (P0.31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P0_31) }, // CircuitPython MOSI | MicroMod SPI_MOSI (P0.31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_28) }, // CircuitPython SCK | MicroMod SPI_SCK | LED_CLK (P0.28)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_P0_20) }, // CircuitPython CS | MicroMod SPI_CS (P0.20)
|
||||
|
||||
// MicroMod 2-wire serial LED pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_DAT), MP_ROM_PTR(&pin_P0_31) }, // MicroMod LED_DAT | SPI_COPI (P0.31)
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_CLK), MP_ROM_PTR(&pin_P0_28) }, // MicroMod LED_CLK | SPI_SCK (P0.28)
|
||||
|
||||
// MicroMod SDIO pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR(&pin_P0_19) }, // MicroMod SDIO_SCK | SPI_SCK1 (P0.19)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR(&pin_P0_14) }, // MicroMod SDIO_CMD | SPI_COPI1 (P0.14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA0), MP_ROM_PTR(&pin_P0_21) }, // MicroMod SDIO_DATA0 | SPI_CIPO1 (P0.21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA1), MP_ROM_PTR(&pin_P0_22) }, // MicroMod SDIO_DATA1 (P0.22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA2), MP_ROM_PTR(&pin_P0_23) }, // MicroMod SDIO_DATA2 (P0.23)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA3), MP_ROM_PTR(&pin_P1_00) }, // MicroMod SDIO_DATA3 | SPI_CS1 (P1.00)
|
||||
|
||||
// MicroMod SPI1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO1), MP_ROM_PTR(&pin_P0_21) }, // MicroMod SPI_CIPO1 | SDIO_DATA0 (P0.21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MISO1), MP_ROM_PTR(&pin_P0_21) }, // MicroMod SPI_MISO1 (P0.21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI1), MP_ROM_PTR(&pin_P0_14) }, // MicroMod SPI_COPI1 | SDIO_CMD (P0.14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MOSI1), MP_ROM_PTR(&pin_P0_14) }, // MicroMod SPI_MOSI1 (P0.14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK1), MP_ROM_PTR(&pin_P0_19) }, // MicroMod SPI_SCK1 | SDIO_SCK (P0.19)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS1), MP_ROM_PTR(&pin_P1_00) }, // MicroMod SPI_CS1 | SDIO_DATA3 (P1.00)
|
||||
|
||||
// MicroMod audio pins (not supported by MDBT50Q-P1M)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_MCLK), MP_ROM_PTR() }, // MicroMod AUD_MCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_OUT), MP_ROM_PTR() }, // MicroMod AUD_OUT | I2S_OUT | PCM_OUT | CAM_MCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_IN), MP_ROM_PTR() }, // MicroMod AUD_IN | I2S_IN | PCM_IN | CAM_PCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_LRCLK), MP_ROM_PTR(&pin_P0_26) },// MicroMod AUD_LRCLK | I2S_WS | PCM_SYNC | PDM_DATA (P0.26)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_BCLK), MP_ROM_PTR(&pin_P0_25) }, // MicroMod AUD_BCLK | I2S_SCK | PCM_CLK | PDM_CLK (P0.25)
|
||||
|
||||
// MicroMod I2S pins (not supported by MDBT50Q-P1M)
|
||||
// { MP_ROM_QSTR(MP_QSTR_I2S_OUT), MP_ROM_PTR() }, // MicroMod I2S_OUT | AUD_OUT | PCM_OUT | CAM_MCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_I2S_IN), MP_ROM_PTR() }, // MicroMod I2S_IN | AUD_IN | PCM_IN | CAM_PCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_I2S_WS), MP_ROM_PTR(&pin_P0_26) }, // MicroMod I2S_WS | AUD_LRCLK | PCM_SYNC | PDM_DATA (P0.26)
|
||||
// { MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_P0_25) }, // MicroMod I2S_SCK | AUD_BCLK | PCM_CLK | PDM_CLK (P0.25)
|
||||
|
||||
// MicroMod PCM pins (not supported by MDBT50Q-P1M)
|
||||
// { MP_ROM_QSTR(MP_QSTR_PCM_OUT), MP_ROM_PTR() }, // MicroMod PCM_OUT | AUD_OUT | I2S_OUT | CAM_MCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_PCM_IN), MP_ROM_PTR() }, // MicroMod PCM_IN | AUD_IN | I2S_IN | CAM_PCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_PCM_SYNC), MP_ROM_PTR(&pin_P0_26) }, // MicroMod PCM_SYNC | AUD_LRCLK | I2S_WS | PDM_DATA (P0.26)
|
||||
// { MP_ROM_QSTR(MP_QSTR_PCM_CLK), MP_ROM_PTR(&pin_P0_25) }, // MicroMod PCM_CLK | AUD_BCLK | I2S_SCK | PDM_CLK (P0.25)
|
||||
|
||||
// MicroMod PDM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_DATA), MP_ROM_PTR(&pin_P0_26) }, // MicroMod PDM_DATA | AUD_LRCLK | I2S_WS | PCM_SYNC (P0.26)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_CLK), MP_ROM_PTR(&pin_P0_25) }, // MicroMod PDM_CLK | AUD_BCLK | I2S_SCK | PCM_CLK (P0.25)
|
||||
|
||||
// MicroMod SWD pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWDIO), MP_ROM_PTR() }, // MicroMod SWDIO (MDBT50Q-P1M has a dedicated HW SWDIO pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWCLK), MP_ROM_PTR() }, // MicroMod SWDCK (MDBT50Q-P1M has a dedicated HW SWDCLK pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWO), MP_ROM_PTR() }, // MicroMod SWO | G11 (not supported)
|
||||
|
||||
// MicroMod ADC pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_05) }, // MicroMod A0 (P0.05)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_04) }, // MicroMod A1 (P0.04)
|
||||
|
||||
// MicroMod PWM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_P0_06) }, // MicroMod PWM0 (P0.06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_P0_16) }, // MicroMod PWM1 (P0.16)
|
||||
|
||||
// MicroMod digital pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_P0_27) }, // MicroMod D0 (P0.27)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_P1_08) }, // MicroMod D1 | CAM_TRIG (P1.08)
|
||||
|
||||
// MicroMod general purpose pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_P0_29) }, // MicroMod G0 | BUS0 (P0.29)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_P0_03) }, // MicroMod G1 | BUS1 (P0.03)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_P1_13) }, // MicroMod G2 | BUS2 (P1.13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_P1_12) }, // MicroMod G3 | BUS3 (P1.12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_P1_11) }, // MicroMod G4 | BUS4 (P1.11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_P0_17) }, // MicroMod G5 | BUS5 (P0.17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_P1_06) }, // MicroMod G6 | BUS6 (P1.06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR(&pin_P1_04) }, // MicroMod G7 | BUS7 (P1.04)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G8), MP_ROM_PTR(&pin_P1_14) }, // MicroMod G8 (P1.14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_P0_09) }, // MicroMod G9 | ADC_D- | CAM_HSYNC (P0.09)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_P0_10) }, // MicroMod G10 | ADC_D+ | CAM_VSYNC (P0.10)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G11), MP_ROM_PTR() }, // MicroMod G11 | SWO (not connected)
|
||||
|
||||
// MicroMod 8-bit bus pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS0), MP_ROM_PTR(&pin_P0_29) }, // MicroMod BUS0 | G0 (P0.29)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS1), MP_ROM_PTR(&pin_P0_03) }, // MicroMod BUS1 | G1 (P0.03)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS2), MP_ROM_PTR(&pin_P1_13) }, // MicroMod BUS2 | G2 (P1.13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS3), MP_ROM_PTR(&pin_P1_12) }, // MicroMod BUS3 | G3 (P1.12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS4), MP_ROM_PTR(&pin_P1_11) }, // MicroMod BUS4 | G4 (P1.11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS5), MP_ROM_PTR(&pin_P0_17) }, // MicroMod BUS5 | G5 (P0.17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS6), MP_ROM_PTR(&pin_P1_06) }, // MicroMod BUS6 | G6 (P1.06)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS7), MP_ROM_PTR(&pin_P1_04) }, // MicroMod BUS7 | G7 (P1.04)
|
||||
|
||||
// MicroMod differential ADC input pins (not supported by MDBT50Q-P1M)
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DM), MP_ROM_PTR(&pin_P0_09) }, // MicroMod ADC_D- | G9 | CAM_HSYNC (P0.09)
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DP), MP_ROM_PTR(&pin_P0_10) }, // MicroMod ADC_D+ | G10 | CAM_VSYNC (P0.10)
|
||||
|
||||
// MicroMod camera pins (not supported by MDBT50Q-P1M)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_MCLK), MP_ROM_PTR() }, // MicroMod CAM_MCLK | AUD_OUT | I2S_OUT | PCM_OUT (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_PCLK), MP_ROM_PTR() }, // MicroMod CAM_PCLK | AUD_IN | I2S_IN | PCM_IN (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_TRIG), MP_ROM_PTR(&pin_P1_08) }, // MicroMod CAM_TRIG | D1 (P1.08)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_HSYNC), MP_ROM_PTR(&pin_P0_09) },// MicroMod CAM_HSYNC | ADC_D- | G9 (P0.09)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_P0_10) },// MicroMod CAM_VSYNC | ADC_D+ | G10 (P0.10)
|
||||
|
||||
// CircuitPython board objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, // CircuitPython I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, // CircuitPython SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, // CircuitPython UART
|
||||
};
|
||||
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
|
|
|
|||
|
|
@ -1,12 +1,15 @@
|
|||
#define MICROPY_HW_BOARD_NAME "SparkFun MicroMod ATP - RP2040"
|
||||
#define MICROPY_HW_BOARD_NAME "SparkFun MicroMod RP2040 Processor"
|
||||
#define MICROPY_HW_MCU_NAME "rp2040"
|
||||
|
||||
// Status LED
|
||||
#define MICROPY_HW_LED_STATUS (&pin_GPIO25)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO5)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO4)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO14)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO15)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO12)
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO22)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO23)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO20)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_GPIO1)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_GPIO0)
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
USB_VID = 0x1B4F
|
||||
USB_PID = 0x0024
|
||||
USB_PRODUCT = "MicroMod RP2040"
|
||||
USB_MANUFACTURER = "SparkFun"
|
||||
USB_PRODUCT = "SparkFun MicroMod RP2040 Processor"
|
||||
USB_MANUFACTURER = "SparkFun Electronics"
|
||||
|
||||
CHIP_VARIANT = RP2040
|
||||
CHIP_FAMILY = rp2
|
||||
|
|
|
|||
|
|
@ -1,105 +1,223 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||
* Copyright (c) 2021 Chris Wilson
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
|
||||
// D (Digital only) pins (D0,D1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO6) }, // GPIO6 - D0
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO7) }, // GPIO7 - D1
|
||||
// The SparkFun MicroMod spec uses a zero-based peripheral numbering scheme.
|
||||
// The 0th peripheral is the default and the "0" is omitted from the
|
||||
// peripheral name (e.g. "I2C" instead of "I2C0").
|
||||
//
|
||||
// For more details, see https://www.sparkfun.com/micromod#tech-specs
|
||||
|
||||
// A (ADC) pins (A0,A1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) }, // GPIO26 - A0 | ADC0
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC0), MP_ROM_PTR(&pin_GPIO26) }, // ADC0 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) }, // GPIO27 - A1 | ADC1
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC1), MP_ROM_PTR(&pin_GPIO27) }, // ADC1 alias
|
||||
// MicroMod built-in status LED pin
|
||||
// Requirement from the "Designing with MicroMod" SparkFun article:
|
||||
// "... every Processor Board shall include one status LED connected to a
|
||||
// pin that is not connected to the board edge."
|
||||
// Note: GPIO25 is connected to both the status LED and edge connector pin
|
||||
// G10, which doesn't comply with the requirement above...
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO25) }, // MicroMod LED (GPIO25)
|
||||
|
||||
// G (General/BUS) pins (G0-G7, G8 NC, G9-G10, G11 NC)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_GPIO16) }, // GPIO16 - G0 | BUS0
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS0), MP_ROM_PTR(&pin_GPIO16) }, // BUS0 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_GPIO17) }, // GPIO17 - G1 | BUS1
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS1), MP_ROM_PTR(&pin_GPIO17) }, // BUS1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_GPIO18) }, // GPIO18 - G2 | BUS2
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS2), MP_ROM_PTR(&pin_GPIO18) }, // BUS2 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_GPIO19) }, // GPIO19 - G3 | BUS3
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS3), MP_ROM_PTR(&pin_GPIO19) }, // BUS3 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_GPIO20) }, // GPIO20 - G4 | BUS4 | SPI_CIPO
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS4), MP_ROM_PTR(&pin_GPIO20) }, // BUS4 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_GPIO21) }, // GPIO21 - G5 | BUS5 | SPI_CS
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS5), MP_ROM_PTR(&pin_GPIO21) }, // BUS5 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_GPIO22) }, // GPIO22 - G6 | BUS6 | SPI_SCK
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS6), MP_ROM_PTR(&pin_GPIO22) }, // BUS6 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR(&pin_GPIO23) }, // GPIO23 - G7 | BUS7 | SPI_COPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS7), MP_ROM_PTR(&pin_GPIO23) }, // BUS7 alias
|
||||
// NC - G8
|
||||
{ MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_GPIO28) }, // GPIO28- G9 | BUS9 | ADC_D- | CAM_HSYNC
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS9), MP_ROM_PTR(&pin_GPIO28) }, // BUS9 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC_DM), MP_ROM_PTR(&pin_GPIO28) }, // ADC_DM alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_HSYNC), MP_ROM_PTR(&pin_GPIO28) }, // CAM_HSYNC alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_GPIO25) }, // GPIO25 - G10 | BUS10 | ADC_D+ | CAM_VSYNC
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS10), MP_ROM_PTR(&pin_GPIO25) }, // BUS10 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_ADC_DP), MP_ROM_PTR(&pin_GPIO25) }, // ADC_DP alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_GPIO25) }, // CAM_VSYNC alias
|
||||
// NC - G11
|
||||
// MicroMod USB bus input voltage (+5V) pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_VIN), MP_ROM_PTR() }, // MicroMod USB_VIN (not connected)
|
||||
|
||||
// PWM pins (PWM0,PWM1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_GPIO13) }, // GPIO13 - PWM0
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_GPIO24) }, // GPIO24 - PWM1 | AUD_MCLK
|
||||
// MicroMod +3.3V enable pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_P3V3_EN), MP_ROM_PTR() }, // MicroMod 3.3V_EN (not connected)
|
||||
|
||||
// AUD (audio)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_MCLK), MP_ROM_PTR(&pin_GPIO24) }, // GPIO24 - AUD_MCLK | PWM1
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_OUT), MP_ROM_PTR(&pin_GPIO10) }, // GPIO10 - AUD_OUT | SDIO_DAT2
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_IN), MP_ROM_PTR(&pin_GPIO11) }, // GPIO11 - AUD_IN | SDIO_DAT1
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_LRCLK), MP_ROM_PTR(&pin_GPIO2) }, // GPIO2 - AUD_LRCLK | CTS1
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_BCLK), MP_ROM_PTR(&pin_GPIO3) }, // GPIO3 - AUD_BCLK | UART_RTS1
|
||||
// MicroMod battery voltage sense pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATT_VIN3), MP_ROM_PTR(&pin_GPIO29) }, // MicroMod BATT_VIN/3 (GPIO29)
|
||||
|
||||
// Battery Voltage Monitor
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATT_VIN3), MP_ROM_PTR(&pin_GPIO29) }, // GPIO29 - BATT_VIN/3 (ADC03)
|
||||
// MicroMod reset pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_RESET), MP_ROM_PTR() }, // MicroMod RESET# (RP2040 has a dedicated HW RUN pin)
|
||||
|
||||
// MicroMod boot pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR() }, // MicroMod BOOT (RP2040 does not have a dedicated BOOT pin)
|
||||
|
||||
// I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO4) }, // GPIO4 - SDA
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO5) }, // GPIO5 - SCL
|
||||
// MicroMod USB device pins
|
||||
// USB device is always used internally by CircuitPython, so skip creating
|
||||
// the pin objects for it.
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DM), MP_ROM_PTR() }, // MicroMod USB_D- (RP2040 has a dedicated HW USB_DM pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DP), MP_ROM_PTR() }, // MicroMod USB_D+ (RP2040 has a dedicated HW USB_DP pin)
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_GPIO8) }, // GPIO9 - I2C_INT | TX2
|
||||
// MicroMod USB host pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_USBHOST_DM), MP_ROM_PTR() }, // MicroMod USBHOST_D- (RP2040 has a dedicated HW USB_DM pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USBHOST_DP), MP_ROM_PTR() }, // MicroMod USBHOST_D+ (RP2040 has a dedicated HW USB_DP pin)
|
||||
|
||||
// SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_GPIO20) }, // GPIO20 - CIPO | SPI_CIPO | G4
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO20) }, // MISO alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_GPIO23) }, // GPIO23 - COPI | SPI_COPI | G7
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO23) }, // MOSI alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO22) }, // GPIO22 - SCK | SPI_SCK | G6
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO21) }, // GPIO21 - /CS | SPI_/CS | G5
|
||||
// MicroMod CAN pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAN_RX), MP_ROM_PTR() }, // MicroMod CAN_RX (not supported)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAN_TX), MP_ROM_PTR() }, // MicroMod CAN_TX (not supported)
|
||||
|
||||
// SDI/SPI1
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR(&pin_GPIO14) }, // GPIO14 - SDIO SCK | SDIO_CLK
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK1), MP_ROM_PTR(&pin_GPIO14) }, // SPI_SCK1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR(&pin_GPIO15) }, // GPIO15 - SDIO CMD | SDIO_CMD
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI1), MP_ROM_PTR(&pin_GPIO15) },// SPI_COPI1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA0), MP_ROM_PTR(&pin_GPIO12) },// GPIO12 - SDIO DATA0 | SDIO_DATA0
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO1), MP_ROM_PTR(&pin_GPIO12) }, // SPI_CIPO1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA1), MP_ROM_PTR(&pin_GPIO11) },// GPIO11 - SDIO DATA1 | SDIO_DATA1 | AUD_IN
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA2), MP_ROM_PTR(&pin_GPIO10) },// GPIO10 - SDIO DATA2 | SDIO_DATA2 | AUD_OUT
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA3), MP_ROM_PTR(&pin_GPIO9) },// GPIO9 - SDIO DATA3 | SDIO_DATA3 | SPI_CS1
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS1), MP_ROM_PTR(&pin_GPIO9) }, // SPI_CS1 alias
|
||||
// Note: MicroMod UART (UART0) is not present in the edge connector pinout
|
||||
// because the primary debug serial port is exposed as a virtual serial port
|
||||
// over USB.
|
||||
|
||||
// Status LED
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_GPIO25) }, // GPIO25 - LED_BUILTIN | STAT | Blue LED | G10
|
||||
// MicroMod UART1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX1), MP_ROM_PTR(&pin_GPIO0) }, // MicroMod UART_TX1 | CircuitPython TX (GPIO0)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX1), MP_ROM_PTR(&pin_GPIO1) }, // MicroMod UART_RX1 | CircuitPython RX (GPIO1)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RTS1), MP_ROM_PTR(&pin_GPIO3) }, // MicroMod RTS1 (GPIO3)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_CTS1), MP_ROM_PTR(&pin_GPIO2) }, // MicroMod CTS1 (GPIO2)
|
||||
|
||||
// UART
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) }, // GPIO1 - UART RX | UART_RX1 | RX1
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX1), MP_ROM_PTR(&pin_GPIO1) }, // RX1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) }, // GPIO0 - UART TX | UART_TX1 | TX1
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX1), MP_ROM_PTR(&pin_GPIO0) }, // TX1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_CTS), MP_ROM_PTR(&pin_GPIO2) }, // GPIO2 - UART CTS | CTS1 (TRACEDATA3)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CTS1), MP_ROM_PTR(&pin_GPIO2) }, // CTS1 alias
|
||||
{ MP_ROM_QSTR(MP_QSTR_RTS), MP_ROM_PTR(&pin_GPIO3) }, // GPIO3 - UART RTS | RTS1
|
||||
{ MP_ROM_QSTR(MP_QSTR_RTS1), MP_ROM_PTR(&pin_GPIO3) }, // RTS1 alias
|
||||
// CircuitPython default UART pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) }, // CircuitPython TX | MicroMod UART_TX1 (GPIO0)
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) }, // CircuitPython RX | MicroMod UART_RX1 (GPIO1)
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX2), MP_ROM_PTR(&pin_GPIO9) }, // GPIO9 - UART RX | UART_RX2 | RX2 | SDIO_DAT3 | SPI_CS1
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX2), MP_ROM_PTR(&pin_GPIO8) }, // GPIO8 - UART TX | UART_TX2 | TX2 | I2C_INT
|
||||
// MicroMod UART2 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX2), MP_ROM_PTR(&pin_GPIO8) }, // MicroMod UART_TX2 (GPIO8)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX2), MP_ROM_PTR(&pin_GPIO9) }, // MicroMod UART_RX2 (GPIO9)
|
||||
|
||||
// Board objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
// MicroMod I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_GPIO4) }, // MicroMod I2C_SDA | CircuitPython SDA (GPIO4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_GPIO5) }, // MicroMod I2C_SCL | CircuitPython SCL (GPIO5)
|
||||
|
||||
// CircuitPython default I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO4) }, // CircuitPython SDA | MicroMod I2C_SDA (GPIO4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO5) }, // CircuitPython SCL | MicroMod I2C_SCL (GPIO5)
|
||||
|
||||
// MicroMod I2C interrupt pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_GPIO8) }, // MicroMod I2C_INT (GPIO8)
|
||||
|
||||
// MicroMod I2C1 pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_I2C_SDA1), MP_ROM_PTR() }, // MicroMod I2C_SDA1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_I2C_SCL1), MP_ROM_PTR() }, // MicroMod I2C_SCL1 (not connected)
|
||||
|
||||
// MicroMod SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO), MP_ROM_PTR(&pin_GPIO20) }, // MicroMod SPI_CIPO | CircuitPython CIPO (GPIO20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_GPIO20) }, // MicroMod SPI_MISO | CircuitPython MISO (GPIO20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI), MP_ROM_PTR(&pin_GPIO23) }, // MicroMod SPI_COPI | CircuitPython COPI | LED_DAT (GPIO23)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_GPIO23) }, // MicroMod SPI_MOSI | CircuitPython MOSI (GPIO23)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_GPIO22) }, // MicroMod SPI_SCK | CircuitPython SCK | LED_CLK (GPIO22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS), MP_ROM_PTR(&pin_GPIO21) }, // MicroMod SPI_CS | CircuitPython CS (GPIO21)
|
||||
|
||||
// CircuitPython default SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_GPIO20) }, // CircuitPython CIPO | MicroMod SPI_CIPO (GPIO20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO20) }, // CircuitPython MISO | MicroMod SPI_MISO (GPIO20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_GPIO23) }, // CircuitPython COPI | MicroMod SPI_COPI | LED_DAT (GPIO23)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO23) }, // CircuitPython MOSI | MicroMod SPI_MOSI (GPIO23)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO22) }, // CircuitPython SCK | MicroMod SPI_SCK | LED_CLK (GPIO22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO21) }, // CircuitPython CS | MicroMod SPI_CS (GPIO21)
|
||||
|
||||
// MicroMod 2-wire serial LED pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_DAT), MP_ROM_PTR(&pin_GPIO23) }, // MicroMod LED_DAT | SPI_COPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_CLK), MP_ROM_PTR(&pin_GPIO22) }, // MicroMod LED_CLK | SPI_SCK
|
||||
|
||||
// MicroMod SDIO pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR(&pin_GPIO14) }, // MicroMod SDIO_SCK | SPI_SCK1 (GPIO14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR(&pin_GPIO15) }, // MicroMod SDIO_CMD | SPI_COPI1 (GPIO15)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA0), MP_ROM_PTR(&pin_GPIO12) }, // MicroMod SDIO_DATA0 | SPI_CIPO1 (GPIO12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA1), MP_ROM_PTR(&pin_GPIO11) }, // MicroMod SDIO_DATA1 (GPIO11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA2), MP_ROM_PTR(&pin_GPIO10) }, // MicroMod SDIO_DATA2 (GPIO10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDIO_DATA3), MP_ROM_PTR(&pin_GPIO9) }, // MicroMod SDIO_DATA3 | SPI_CS1 (GPIO9)
|
||||
|
||||
// MicroMod SPI1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO1), MP_ROM_PTR(&pin_GPIO12) }, // MicroMod SPI_CIPO1 | SDIO_DATA0 (GPIO12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MISO1), MP_ROM_PTR(&pin_GPIO12) }, // MicroMod SPI_MISO1 (GPIO12)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI1), MP_ROM_PTR(&pin_GPIO15) }, // MicroMod SPI_COPI1 | SDIO_CMD (GPIO15)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MOSI1), MP_ROM_PTR(&pin_GPIO15) }, // MicroMod SPI_MOSI1 (GPIO15)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK1), MP_ROM_PTR(&pin_GPIO14) }, // MicroMod SPI_SCK1 | SDIO_SCK (GPIO14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS1), MP_ROM_PTR(&pin_GPIO9) }, // MicroMod SPI_CS1 | SDIO_DATA3 (GPIO9)
|
||||
|
||||
// MicroMod audio pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_MCLK), MP_ROM_PTR(&pin_GPIO24) }, // MicroMod AUD_MCLK (GPIO24)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_OUT), MP_ROM_PTR(&pin_GPIO10) }, // MicroMod AUD_OUT | I2S_OUT | PCM_OUT | CAM_MCLK (GPIO10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_IN), MP_ROM_PTR(&pin_GPIO11) }, // MicroMod AUD_IN | I2S_IN | PCM_IN | CAM_PCLK (GPIO11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_LRCLK), MP_ROM_PTR(&pin_GPIO2) }, // MicroMod AUD_LRCLK | I2S_WS | PCM_SYNC | PDM_DATA (GPIO2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_AUD_BCLK), MP_ROM_PTR(&pin_GPIO3) }, // MicroMod AUD_BCLK | I2S_SCK | PCM_CLK | PDM_CLK (GPIO3)
|
||||
|
||||
// MicroMod I2S pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_OUT), MP_ROM_PTR(&pin_GPIO10) }, // MicroMod I2S_OUT | AUD_OUT | PCM_OUT | CAM_MCLK (GPIO10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_IN), MP_ROM_PTR(&pin_GPIO11) }, // MicroMod I2S_IN | AUD_IN | PCM_IN | CAM_PCLK (GPIO11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_WS), MP_ROM_PTR(&pin_GPIO2) }, // MicroMod I2S_WS | AUD_LRCLK | PCM_SYNC | PDM_DATA (GPIO2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_GPIO3) }, // MicroMod I2S_SCK | AUD_BCLK | PCM_CLK | PDM_CLK (GPIO3)
|
||||
|
||||
// MicroMod PCM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_OUT), MP_ROM_PTR(&pin_GPIO10) }, // MicroMod PCM_OUT | AUD_OUT | I2S_OUT | CAM_MCLK (GPIO10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_IN), MP_ROM_PTR(&pin_GPIO11) }, // MicroMod PCM_IN | AUD_IN | I2S_IN | CAM_PCLK (GPIO11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_SYNC), MP_ROM_PTR(&pin_GPIO2) }, // MicroMod PCM_SYNC | AUD_LRCLK | I2S_WS | PDM_DATA (GPIO2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_CLK), MP_ROM_PTR(&pin_GPIO3) }, // MicroMod PCM_CLK | AUD_BCLK | I2S_SCK | PDM_CLK (GPIO3)
|
||||
|
||||
// MicroMod PDM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_DATA), MP_ROM_PTR(&pin_GPIO2) }, // MicroMod PDM_DATA | AUD_LRCLK | I2S_WS | PCM_SYNC (GPIO2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_CLK), MP_ROM_PTR(&pin_GPIO3) }, // MicroMod PDM_CLK | AUD_BCLK | I2S_SCK | PCM_CLK (GPIO3)
|
||||
|
||||
// MicroMod SWD pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWDIO), MP_ROM_PTR() }, // MicroMod SWDIO (RP2040 has a dedicated HW SWDIO pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWCLK), MP_ROM_PTR() }, // MicroMod SWDCK (RP2040 has a dedicated HW SWCLK pin)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWO), MP_ROM_PTR() }, // MicroMod SWO | G11 (not supported)
|
||||
|
||||
// MicroMod ADC pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) }, // MicroMod A0 (GPIO26)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) }, // MicroMod A1 (GPIO27)
|
||||
|
||||
// MicroMod PWM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_GPIO13) }, // MicroMod PWM0 (GPIO13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_GPIO24) }, // MicroMod PWM1 (GPIO24)
|
||||
|
||||
// MicroMod digital pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO6) }, // MicroMod D0 (GPIO6)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO7) }, // MicroMod D1 | CAM_TRIG (GPIO7)
|
||||
|
||||
// MicroMod general purpose pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_GPIO16) }, // MicroMod G0 | BUS0 (GPIO16)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_GPIO17) }, // MicroMod G1 | BUS1 (GPIO17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_GPIO18) }, // MicroMod G2 | BUS2 (GPIO18)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_GPIO19) }, // MicroMod G3 | BUS3 (GPIO19)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_GPIO20) }, // MicroMod G4 | BUS4 (GPIO20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_GPIO21) }, // MicroMod G5 | BUS5 (GPIO21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_GPIO22) }, // MicroMod G6 | BUS6 (GPIO22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR(&pin_GPIO23) }, // MicroMod G7 | BUS7 (GPIO23)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G8), MP_ROM_PTR() }, // MicroMod G8 (not connected)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_GPIO28) }, // MicroMod G9 | ADC_D- | CAM_HSYNC (GPIO28)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_GPIO25) }, // MicroMod G10 | ADC_D+ | CAM_VSYNC (GPIO25)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G11), MP_ROM_PTR() }, // MicroMod G11 | SWO (not connected)
|
||||
|
||||
// MicroMod 8-bit bus pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS0), MP_ROM_PTR(&pin_GPIO16) }, // MicroMod BUS0 | G0 (GPIO16)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS1), MP_ROM_PTR(&pin_GPIO17) }, // MicroMod BUS1 | G1 (GPIO17)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS2), MP_ROM_PTR(&pin_GPIO18) }, // MicroMod BUS2 | G2 (GPIO18)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS3), MP_ROM_PTR(&pin_GPIO19) }, // MicroMod BUS3 | G3 (GPIO19)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS4), MP_ROM_PTR(&pin_GPIO20) }, // MicroMod BUS4 | G4 (GPIO20)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS5), MP_ROM_PTR(&pin_GPIO21) }, // MicroMod BUS5 | G5 (GPIO21)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS6), MP_ROM_PTR(&pin_GPIO22) }, // MicroMod BUS6 | G6 (GPIO22)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS7), MP_ROM_PTR(&pin_GPIO23) }, // MicroMod BUS7 | G7 (GPIO23)
|
||||
|
||||
// MicroMod differential ADC input pins (not supported by RP2040)
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DM), MP_ROM_PTR(&pin_GPIO28) }, // MicroMod ADC_D- | G9 | CAM_HSYNC (GPIO28)
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DP), MP_ROM_PTR(&pin_GPIO25) }, // MicroMod ADC_D+ | G10 | CAM_VSYNC (GPIO25)
|
||||
|
||||
// MicroMod camera pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_MCLK), MP_ROM_PTR(&pin_GPIO10) }, // MicroMod CAM_MCLK | AUD_OUT | I2S_OUT | PCM_OUT (GPIO10)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_PCLK), MP_ROM_PTR(&pin_GPIO11) }, // MicroMod CAM_PCLK | AUD_IN | I2S_IN | PCM_IN (GPIO11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_TRIG), MP_ROM_PTR(&pin_GPIO7) }, // MicroMod CAM_TRIG | D1 (GPIO7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_HSYNC), MP_ROM_PTR(&pin_GPIO28) }, // MicroMod CAM_HSYNC | ADC_D- | G9 (GPIO28)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_GPIO25) }, // MicroMod CAM_VSYNC | ADC_D+ | G10 (GPIO25)
|
||||
|
||||
// CircuitPython board objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, // CircuitPython I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, // CircuitPython SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, // CircuitPython UART
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
|
||||
|
|
|
|||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
|
||||
void board_init(void) {
|
||||
}
|
||||
|
||||
bool board_requests_safe_mode(void) {
|
||||
return false;
|
||||
}
|
||||
|
||||
void reset_board(void) {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021 Chris Wilson
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
// Micropython setup
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "SparkFun STM32 MicroMod Processor"
|
||||
#define MICROPY_HW_MCU_NAME "STM32F405RG"
|
||||
|
||||
#define FLASH_SIZE (0x100000)
|
||||
#define FLASH_PAGE_SIZE (0x4000)
|
||||
|
||||
#define HSE_VALUE ((uint32_t)12000000)
|
||||
#define LSE_VALUE ((uint32_t)32768)
|
||||
#define BOARD_HAS_LOW_SPEED_CRYSTAL (1)
|
||||
|
||||
// Status LED
|
||||
#define MICROPY_HW_LED_STATUS (&pin_PA15)
|
||||
|
||||
// On-board SPI flash
|
||||
#define SPI_FLASH_MOSI_PIN (&pin_PC12)
|
||||
#define SPI_FLASH_MISO_PIN (&pin_PC11)
|
||||
#define SPI_FLASH_SCK_PIN (&pin_PC10)
|
||||
#define SPI_FLASH_CS_PIN (&pin_PC03)
|
||||
|
||||
// Bootloader only
|
||||
#ifdef UF2_BOOTLOADER_ENABLED
|
||||
#define BOARD_VTOR_DEFER (1) // Leave VTOR relocation to bootloader
|
||||
#endif
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB10)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PB11)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_PA05)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_PA07)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_PA06)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_PA03)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_PA02)
|
||||
|
||||
// USB is always used internally so skip the pin objects for it.
|
||||
#define IGNORE_PIN_PA11 (1)
|
||||
#define IGNORE_PIN_PA12 (1)
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
USB_VID = 0X1B4F
|
||||
USB_PID = 0x0027
|
||||
USB_PRODUCT = "SparkFun STM32 MicroMod Processor"
|
||||
USB_MANUFACTURER = "SparkFun Electronics"
|
||||
|
||||
SPI_FLASH_FILESYSTEM = 1
|
||||
EXTERNAL_FLASH_DEVICES = W25Q128JVxM
|
||||
|
||||
MCU_SERIES = F4
|
||||
MCU_VARIANT = STM32F405xx
|
||||
MCU_PACKAGE = LQFP64
|
||||
|
||||
LD_COMMON = boards/common_default.ld
|
||||
LD_DEFAULT = boards/STM32F405_default.ld
|
||||
# UF2 boot option
|
||||
LD_BOOT = boards/STM32F405_boot.ld
|
||||
UF2_OFFSET = 0x8010000
|
||||
|
||||
CIRCUITPY_RGBMATRIX ?= 1
|
||||
|
|
@ -0,0 +1,224 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021 Chris Wilson
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
// The SparkFun MicroMod spec uses a zero-based peripheral numbering scheme.
|
||||
// The 0th peripheral is the default and the "0" is omitted from the
|
||||
// peripheral name (e.g. "I2C" instead of "I2C0").
|
||||
//
|
||||
// For more details, see https://www.sparkfun.com/micromod#tech-specs
|
||||
|
||||
// MicroMod built-in status LED pin
|
||||
// Requirement from the "Designing with MicroMod" SparkFun article:
|
||||
// "... every Processor Board shall include one status LED connected to a
|
||||
// pin that is not connected to the board edge."
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA15) }, // MicroMod LED (PA15)
|
||||
|
||||
// MicroMod USB bus input voltage (+5V) pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_VIN), MP_ROM_PTR() }, // MicroMod USB_VIN (not connected)
|
||||
|
||||
// MicroMod +3.3V enable pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_P3V3_EN), MP_ROM_PTR() }, // MicroMod 3.3V_EN (not connected)
|
||||
|
||||
// MicroMod battery voltage sense pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATT_VIN3), MP_ROM_PTR(&pin_PA01) }, // MicroMod BATT_VIN/3 (PA1)
|
||||
|
||||
// MicroMod reset pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_RESET), MP_ROM_PTR() }, // MicroMod RESET# (STM32 has a dedicated HW NRST pin)
|
||||
|
||||
// MicroMod boot pin
|
||||
// { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR() }, // MicroMod BOOT (STM32 has a dedicated HW BOOT0 pin)
|
||||
|
||||
// MicroMod USB device pins
|
||||
// USB device is always used internally by CircuitPython, so skip creating
|
||||
// the pin objects for it. See explicit ignores in mpconfigboard.h.
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DM), MP_ROM_PTR(&pin_PA11) }, // MicroMod USB_D- (PA11)
|
||||
// { MP_ROM_QSTR(MP_QSTR_USB_DP), MP_ROM_PTR(&pin_PA12) }, // MicroMod USB_D+ (PA12)
|
||||
|
||||
// MicroMod USB host pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_USBHOST_DM), MP_ROM_PTR(&pin_PB14) }, // MicroMod USBHOST_D- (PB14)
|
||||
{ MP_ROM_QSTR(MP_QSTR_USBHOST_DP), MP_ROM_PTR(&pin_PB15) }, // MicroMod USBHOST_D+ (PB15)
|
||||
|
||||
// MicroMod CAN pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAN_RX), MP_ROM_PTR(&pin_PB08) }, // MicroMod CAN_RX (PB8)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAN_TX), MP_ROM_PTR(&pin_PB09) }, // MicroMod CAN_TX (PB9)
|
||||
|
||||
// Note: MicroMod UART (UART0) is not present in the edge connector pinout
|
||||
// because the primary debug serial port is exposed as a virtual serial port
|
||||
// over USB.
|
||||
|
||||
// MicroMod UART1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_TX1), MP_ROM_PTR(&pin_PA02) }, // MicroMod UART_TX1 | CircuitPython TX (PA2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART_RX1), MP_ROM_PTR(&pin_PA03) }, // MicroMod UART_RX1 | CircuitPython RX (PA3)
|
||||
// { MP_ROM_QSTR(MP_QSTR_UART_RTS1), MP_ROM_PTR() }, // MicroMod RTS1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_UART_CTS1), MP_ROM_PTR() }, // MicroMod CTS1 (not connected)
|
||||
|
||||
// CircuitPython default UART pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA02) }, // CircuitPython TX | MicroMod UART_TX1 (PA2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA03) }, // CircuitPython RX | MicroMod UART_RX1 (PA3)
|
||||
|
||||
// MicroMod UART2 pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_UART_TX2), MP_ROM_PTR() }, // MicroMod UART_TX2 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_UART_RX2), MP_ROM_PTR() }, // MicroMod UART_RX2 (not connected)
|
||||
|
||||
// MicroMod I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_PB11) }, // MicroMod I2C_SDA | CircuitPython SDA (PB11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_PB10) }, // MicroMod I2C_SCL | CircuitPython SCL (PB10)
|
||||
|
||||
// CircuitPython default I2C pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB11) }, // CircuitPython SDA | MicroMod I2C_SDA (PB11)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB10) }, // CircuitPython SCL | MicroMod I2C_SCL (PB10)
|
||||
|
||||
// MicroMod I2C interrupt pin
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_INT), MP_ROM_PTR(&pin_PB01) }, // MicroMod I2C_INT (PB1)
|
||||
|
||||
// MicroMod I2C1 pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SDA1), MP_ROM_PTR(&pin_PB07) }, // MicroMod I2C_SDA1 (PB7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C_SCL1), MP_ROM_PTR(&pin_PB06) }, // MicroMod I2C_SCL1 (PB6)
|
||||
|
||||
// MicroMod SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CIPO), MP_ROM_PTR(&pin_PA06) }, // MicroMod SPI_CIPO | CircuitPython CIPO (PA6)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_PA06) }, // MicroMod SPI_MISO | CircuitPython MISO (PA6)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_COPI), MP_ROM_PTR(&pin_PA07) }, // MicroMod SPI_COPI | CircuitPython COPI | LED_DAT (PA7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_PA07) }, // MicroMod SPI_MOSI | CircuitPython MOSI (PA7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_PA05) }, // MicroMod SPI_SCK | CircuitPython SCK | LED_CLK (PA5)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI_CS), MP_ROM_PTR(&pin_PA04) }, // MicroMod SPI_CS | CircuitPython CS (PC4)
|
||||
|
||||
// CircuitPython default SPI pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_CIPO), MP_ROM_PTR(&pin_PA06) }, // CircuitPython CIPO | MicroMod SPI_CIPO (PA6)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA06) }, // CircuitPython MISO | MicroMod SPI_MISO (PA6)
|
||||
{ MP_ROM_QSTR(MP_QSTR_COPI), MP_ROM_PTR(&pin_PA07) }, // CircuitPython COPI | MicroMod SPI_COPI | LED_DAT (PA7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA07) }, // CircuitPython MOSI | MicroMod SPI_MOSI (PA7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA05) }, // CircuitPython SCK | MicroMod SPI_SCK | LED_CLK (PA5)
|
||||
{ MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_PA04) }, // CircuitPython CS | MicroMod SPI_CS (PC4)
|
||||
|
||||
// MicroMod 2-wire serial LED pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_DAT), MP_ROM_PTR(&pin_PA07) }, // MicroMod LED_DAT | SPI_COPI (PA7)
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_CLK), MP_ROM_PTR(&pin_PA05) }, // MicroMod LED_CLK | SPI_SCK (PA5)
|
||||
|
||||
// MicroMod SDIO pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR() }, // MicroMod SDIO_SCK | SPI_SCK1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR() }, // MicroMod SDIO_CMD | SPI_COPI1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA0), MP_ROM_PTR() }, // MicroMod SDIO_DATA0 | SPI_CIPO1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA1), MP_ROM_PTR() }, // MicroMod SDIO_DATA1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA2), MP_ROM_PTR() }, // MicroMod SDIO_DATA2 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SDIO_DATA3), MP_ROM_PTR() }, // MicroMod SDIO_DATA3 | SPI_CS1 (not connected)
|
||||
|
||||
// MicroMod SPI1 pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_CIPO1), MP_ROM_PTR() }, // MicroMod SPI_CIPO1 | SDIO_DATA0 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_MISO1), MP_ROM_PTR() }, // MicroMod SPI_MISO1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_COPI1), MP_ROM_PTR() }, // MicroMod SPI_COPI1 | SDIO_CMD (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_MOSI1), MP_ROM_PTR() }, // MicroMod SPI_MOSI1 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_SCK1), MP_ROM_PTR() }, // MicroMod SPI_SCK1 | SDIO_SCK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SPI_CS1), MP_ROM_PTR() }, // MicroMod SPI_CS1 | SDIO_DATA3 (not connected)
|
||||
|
||||
// MicroMod audio pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_MCLK), MP_ROM_PTR() }, // MicroMod AUD_MCLK (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_OUT), MP_ROM_PTR(&pin_PB04) }, // MicroMod AUD_OUT | I2S_OUT | PCM_OUT | CAM_MCLK (PB4)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_IN), MP_ROM_PTR(&pin_PB05) }, // MicroMod AUD_IN | I2S_IN | PCM_IN | CAM_PCLK (PB5)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_LRCLK), MP_ROM_PTR(&pin_PA04) }, // MicroMod AUD_LRCLK | I2S_WS | PCM_SYNC | PDM_DATA (PA4)
|
||||
// { MP_ROM_QSTR(MP_QSTR_AUD_BCLK), MP_ROM_PTR(&pin_PB03) }, // MicroMod AUD_BCLK | I2S_SCK | PCM_CLK | PDM_CLK (PB3)
|
||||
|
||||
// MicroMod I2S pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_OUT), MP_ROM_PTR(&pin_PB04) }, // MicroMod I2S_OUT | AUD_OUT | PCM_OUT | CAM_MCLK (PB4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_IN), MP_ROM_PTR(&pin_PB05) }, // MicroMod I2S_IN | AUD_IN | PCM_IN | CAM_PCLK (PB5)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_WS), MP_ROM_PTR(&pin_PA04) }, // MicroMod I2S_WS | AUD_LRCLK | PCM_SYNC | PDM_DATA (PA4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_PB03) }, // MicroMod I2S_SCK | AUD_BCLK | PCM_CLK | PDM_CLK (PB3)
|
||||
|
||||
// MicroMod PCM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_OUT), MP_ROM_PTR(&pin_PB04) }, // MicroMod PCM_OUT | AUD_OUT | I2S_OUT | CAM_MCLK (PB4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_IN), MP_ROM_PTR(&pin_PB05) }, // MicroMod PCM_IN | AUD_IN | I2S_IN | CAM_PCLK (PB5)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_SYNC), MP_ROM_PTR(&pin_PA04) }, // MicroMod PCM_SYNC | AUD_LRCLK | I2S_WS | PDM_DATA (PA4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PCM_CLK), MP_ROM_PTR(&pin_PB03) }, // MicroMod PCM_CLK | AUD_BCLK | I2S_SCK | PDM_CLK (PB3)
|
||||
|
||||
// MicroMod PDM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_DATA), MP_ROM_PTR(&pin_PA04) }, // MicroMod PDM_DATA | AUD_LRCLK | I2S_WS | PCM_SYNC (PA4)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PDM_CLK), MP_ROM_PTR(&pin_PB03) }, // MicroMod PDM_CLK | AUD_BCLK | I2S_SCK | PCM_CLK (PB3)
|
||||
|
||||
// MicroMod SWD pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SWDIO), MP_ROM_PTR(&pin_PA13) }, // MicroMod SWDIO (PA13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SWCLK), MP_ROM_PTR(&pin_PA14) }, // MicroMod SWDCK (PA14)
|
||||
// { MP_ROM_QSTR(MP_QSTR_SWO), MP_ROM_PTR() }, // MicroMod SWO | G11 (not connected)
|
||||
|
||||
// MicroMod ADC pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PC05) }, // MicroMod A0 (PC5)
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB00) }, // MicroMod A1 (PB0)
|
||||
|
||||
// MicroMod PWM pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_PC06) }, // MicroMod PWM0 (PC6)
|
||||
{ MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_PC07) }, // MicroMod PWM1 (PC7)
|
||||
|
||||
// MicroMod digital pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PC00) }, // MicroMod D0 (PC0)
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PC01) }, // MicroMod D1 | CAM_TRIG (PC1)
|
||||
|
||||
// MicroMod general purpose pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_G0), MP_ROM_PTR(&pin_PD02) }, // MicroMod G0 | BUS0 (PD2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_PA08) }, // MicroMod G1 | BUS1 (PA8)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_PA00) }, // MicroMod G2 | BUS2 (PA0)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_PC08) }, // MicroMod G3 | BUS3 (PC8)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_PC09) }, // MicroMod G4 | BUS4 (PC9)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G5), MP_ROM_PTR(&pin_PC13) }, // MicroMod G5 | BUS5 (PC13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G6), MP_ROM_PTR(&pin_PC02) }, // MicroMod G6 | BUS6 (PC2)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G7), MP_ROM_PTR() }, // MicroMod G7 | BUS7 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G8), MP_ROM_PTR() }, // MicroMod G8 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR() }, // MicroMod G9 | ADC_D- | CAM_HSYNC (not connected)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_PB13) }, // MicroMod G10 | ADC_D+ | CAM_VSYNC (PB13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_G11), MP_ROM_PTR(&pin_PB12) }, // MicroMod G11 | SWO (PB12)
|
||||
|
||||
// MicroMod 8-bit bus pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS0), MP_ROM_PTR(&pin_PD02) }, // MicroMod BUS0 | G0 (PD2)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS1), MP_ROM_PTR(&pin_PA08) }, // MicroMod BUS1 | G1 (PA8)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS2), MP_ROM_PTR(&pin_PA00) }, // MicroMod BUS2 | G2 (PA0)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS3), MP_ROM_PTR(&pin_PC08) }, // MicroMod BUS3 | G3 (PC8)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS4), MP_ROM_PTR(&pin_PC09) }, // MicroMod BUS4 | G4 (PC9)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS5), MP_ROM_PTR(&pin_PC13) }, // MicroMod BUS5 | G5 (PC13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUS6), MP_ROM_PTR(&pin_PC02) }, // MicroMod BUS6 | G6 (PC2)
|
||||
// { MP_ROM_QSTR(MP_QSTR_BUS7), MP_ROM_PTR() }, // MicroMod BUS7 | G7 (not connected)
|
||||
|
||||
// MicroMod differential ADC input pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DM), MP_ROM_PTR() }, // MicroMod ADC_D- | G9 | CAM_HSYNC (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_ADC_DP), MP_ROM_PTR(&pin_PB13) }, // MicroMod ADC_D+ | G10 | CAM_VSYNC (PB13)
|
||||
|
||||
// MicroMod camera pins
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_MCLK), MP_ROM_PTR(&pin_PB04) }, // MicroMod CAM_MCLK | AUD_OUT | I2S_OUT | PCM_OUT (PB4)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_PCLK), MP_ROM_PTR(&pin_PB05) }, // MicroMod CAM_PCLK | AUD_IN | I2S_IN | PCM_IN (PB5)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_TRIG), MP_ROM_PTR(&pin_PC01) }, // MicroMod CAM_TRIG | D1 (PC1)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_HSYNC), MP_ROM_PTR() }, // MicroMod CAM_HSYNC | ADC_D- | G9 (not connected)
|
||||
// { MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_PB13) }, // MicroMod CAM_VSYNC | ADC_D+ | G10 (PB13)
|
||||
|
||||
// Module-specific aliases (not part of the MicroMod spec)
|
||||
{ MP_ROM_QSTR(MP_QSTR_HOST_VBUS), MP_ROM_PTR(&pin_PB13) }, // HOST_VBUS | G10 | ADC_D+ | CAM_VSYNC (PB13)
|
||||
{ MP_ROM_QSTR(MP_QSTR_HOST_ID), MP_ROM_PTR(&pin_PB12) }, // HOST_ID | G11 | SWO (PB12)
|
||||
|
||||
// CircuitPython board objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, // CircuitPython I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, // CircuitPython SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, // CircuitPython UART
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
Loading…
Reference in New Issue