c37ade9aeb
Correct NO_TIMER index value for SAMD21.
...
We check validity by ensuring it's lower than the total number of
timers. 0 is a terrible number for the NO_TIMER value because its
valid even though it shouldn't be.
Fixes https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO/issues/29
2018-03-13 12:44:00 -07:00
b64d568267
Merge pull request #677 from tannewt/usb_active_read
...
Move usb read finish into interrupt.
2018-03-13 15:16:40 -04:00
8157248189
Move usb read finish into interrupt.
...
Having the `active_read = false` in the background function left
a chance that a new_write occurs before active_read is set to false.
In that case, we'll read the appropriate data rather than write it
and never clear the active write.
Hopefully fixes #655 .
2018-03-13 11:29:29 -07:00
945f2f5aa1
line 172 has a typo correct 2MB to 4MB
2018-03-13 13:42:29 -04:00
81ab2526e4
gamepad: Enable the gamepad module for express boards in 3.x
2018-03-11 13:39:54 +01:00
e7fc0b6aa7
Use DMA for long SPI transactions including those to the SPI Flash.
...
QSPI is not currently working so its commented out.
This is progress on #652 .
2018-03-09 12:45:46 -08:00
942b7ffbe0
fixes hardware dotstar support for 3.0 and addresses issue #514
2018-03-08 20:39:47 -08:00
01aceaae50
Support all boards and remove erase and page sizes because they never change.
2018-03-01 12:45:12 -08:00
2ab923862b
Structify flash device definitions.
2018-02-28 19:15:54 -08:00
568c04e6af
Merge pull request #650 from tannewt/merge_2x
...
Merge in commits from 2.x branch.
2018-02-27 22:03:52 -05:00
bf05183158
Merge remote-tracking branch 'adafruit/2.x' into merge_2x
2018-02-27 15:24:16 -08:00
5c24023240
use CONF_GCLK_DAC_SRC and refactor a bit
2018-02-27 17:21:03 -05:00
4895a9d1d8
Use safe clock freqs for AnalogOut; use DAC REFRESH on SAMD51.
2018-02-27 15:44:27 -05:00
e42209a6b2
fixes timer number assumptions for samd51s for issue #646
2018-02-27 00:42:40 -08:00
cc7acfd491
consistently brand Itsy Bitsy M0 as 'Express'
2018-02-26 17:37:03 -05:00
957a82b592
add board.RX and .TX pins to metro_m4_express_revb
2018-02-23 09:54:39 -05:00
7399a1a5c7
Merge pull request #634 from dhalbert/3.0_UART
...
Implement UART for 3.0 + related fixes.
2018-02-21 23:07:27 -05:00
9b4477e1dc
Implement UART for 3.0 + related fixes.
...
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.
2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
a. async USART driver
b. bringing Atmel START configuration closer to what we use
c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
2018-02-21 17:18:49 -05:00
9c5a9e3411
Update boards URL in README.rst
...
Corrected a (probably) old URL in the read me.
2018-02-21 16:14:46 +00:00
d02251f8cd
Add a new board for Metro M4 Express Rev B. This is the board
...
send to community members for testing.
Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
2018-02-20 12:34:07 -08:00
653fc8877d
Remove breakpoint instruction used for debugging.
2018-02-19 21:38:14 -08:00
15f626be58
m4 qspi works. m0 compiles
2018-02-19 14:02:04 -08:00
f20d5723aa
Reorganize things. Reading jdec works.
2018-02-19 14:02:04 -08:00
4710a2adba
Compiles for m4. Untested on m0.
...
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
2018-02-19 14:02:04 -08:00
a2bd772d5c
Begin rework to add qspi support.
2018-02-19 14:02:04 -08:00
a2b18b75d4
Fix loops and comma style.
2018-02-16 10:05:28 -08:00
eb2b41810a
Turn on lto
2018-02-15 16:12:58 -08:00
538081528d
pulsein works on m0
2018-02-15 16:04:39 -08:00
fcde138ea3
pulsein works on m4
2018-02-15 15:12:58 -08:00
07230f2637
pulsein compiles but doesn't work
2018-02-14 16:59:04 -08:00
c7af17525b
m4 pulseout works
2018-02-14 11:38:52 -08:00
6a7d889dd4
m0 pulseout works. Factored out shared timer code.
2018-02-13 18:17:20 -08:00
8479eef578
m0 tc and tcc work
2018-02-13 16:44:04 -08:00
6c3075bec6
m4 tc and tcc works. multi-tcc channels ok too.
2018-02-13 14:22:55 -08:00
cc616aea4e
m4 tc output works. Watch out for the PAC!
2018-02-12 23:41:26 -08:00
0397202288
m4 compiles, pwmout implemented but TC0 (A1) doesn't run
2018-02-09 17:21:06 -08:00
0398f308fa
m4 compiles, pwmout implemented
2018-02-09 16:37:27 -08:00
190e7d629e
WIP
2018-02-09 16:37:27 -08:00
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio
...
Enable bitbangio now that we have digitalio.
2018-02-08 21:24:32 -05:00
3e63f59867
Use write instead of set because it clears the bits before setting them.
2018-02-08 16:12:33 -08:00
aeae0090af
Enable bitbangio now that we have digitalio.
...
Also remove a rogue neopixel_write.
2018-02-08 16:03:05 -08:00
82bc11585e
ports/atmel-samd: Re-enable analogio
...
This introduces SAMD51 support and re-enables SAMD21 support.
Fixes #263
2018-02-08 14:48:08 -08:00
dfc2b82ede
Added SAMD51G support as per issue #597
2018-02-07 21:23:25 -08:00
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
e550b024c5
atmel-samd: Correct computation of SPI baud rate.
...
all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0
...
Update ugame port for the final ugame10 version
2018-01-29 13:35:06 -08:00
d595a03bbd
Update ugame port for the final ugame10 version
...
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
2018-01-29 22:19:09 +01:00
189c62ac7d
Bring back the _stage library
...
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
2018-01-29 21:24:46 +01:00
efbf08266b
make _estack be double-word aligned
2018-01-24 19:24:36 -05:00
Scott Shawcroft
Dan Halbert
vesperk38
Radomir Dopieralski
Scott Shawcroft
Bryan Siepert
Bryan Siepert
Kattni
James Devine