djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
30,000 Commits 21 Branches 274 Tags 785 MiB
9ab0733a28
Commit Graph

1155 Commits

Author SHA1 Message Date
Hany Elkomy
3d9e4958c5
Add files via upload 2020-12-17 14:24:24 +08:00
Hany Elkomy
f3b7cd6a5d
Delete pins.c 2020-12-17 14:24:07 +08:00
Hany Elkomy
70739ff639
Update pins.c 2020-12-17 13:11:53 +08:00
Hany Elkomy
fac0bf1db8
Add files via upload 2020-12-17 12:37:32 +08:00
Dan Halbert
4521dfb732 squeeze some smaller boards 2020-12-15 13:23:49 -05:00
Dan Halbert
97947b4fe9 shrink bast_pro_mini_m0; use proper flex-array syntax 2020-12-14 22:07:54 -05:00
Thea Flowers
fe32dd08b8 Update Big Honking Button configuration to support its newest board revision. 
v5 of the BHB board has:

* GD25Q64C instead of the GD25Q16C.
* Pin PB10 tied to ground for board revision detection.
 2020-12-12 19:16:35 -05:00
Scott Shawcroft
344d3c59cb
Merge branch 'main' into msgpack 2020-12-11 11:10:30 -08:00
Scott Shawcroft
0b4bcd9599
Fix build and more comments 2020-12-08 13:05:21 -08:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep 
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
 2020-12-08 10:52:25 -08:00
gamblor21
cb863e4c5c Added to partial builds where frozen removed 2020-12-01 22:19:48 -06:00
Bernhard Boser
59c3e25168
disable on boards tight on memory. add stddef.h to imports (not actually needed). 2020-12-01 18:39:24 -08:00
Mark
237385798c
Merge branch 'main' into bus_device 2020-12-01 15:47:16 -06:00
Dan Halbert
dbfabddf58 rename ESP TX and RX pins; remove support 2020-11-30 11:11:04 -05:00
Dan Halbert
848eb28132 esp-uart-pins 2020-11-28 14:52:56 -05:00
Seth Kerr
686edcef3f fixing PID issues with CI Test (whoops) 2020-11-24 07:41:32 -05:00
Seth Kerr
e5cee98977 removing icy tree files/directory 2020-11-23 19:31:06 -05:00
Seth Kerr
2635132ce5 adding 'haxpress' kind of build for CP Sapling for use with SPI Flash 2020-11-23 19:21:12 -05:00
Seth Kerr
1c92b1bf61 forgot to run pre-commit local 2020-11-20 15:35:52 -05:00
Seth Kerr
c4f4cdd8c1 readding cp_sapling directory 2020-11-20 15:31:49 -05:00
Seth Kerr
29e91424d4 removing cp sapling temporarily to read 2020-11-20 15:29:35 -05:00
Seth Kerr
b69bbfa3d6 fixed issues with trailing whitespace check 2020-11-20 15:17:44 -05:00
Seth Kerr
0a06530d52 adding CP-Sapling 2020-11-20 15:06:57 -05:00
Scott Shawcroft
bda3267432
Save flash space 
* No weak link for modules. It only impacts _os and _time and is
  already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
  M0 Express.
* Change ejected default to false to move it to BSS. It is set on
  USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
  RAM.
 2020-11-13 18:57:52 -08:00
Scott Shawcroft
c9952798fb
Merge pull request #3683 from BHDynamics/dynossat_edu 
Rename pins on dynossat_edu_eps to make them the same as the Arduino core
 2020-11-12 12:33:16 -08:00
Enrique Casado
aa68b17223 Freed some more space 2020-11-12 13:26:26 +01:00
Enrique Casado
9774736a50 Rename pins to make them the same as the Arduino core 2020-11-12 12:30:34 +01:00
gamblor21
23ed3ef971 Removing frozen libs 2020-11-11 11:36:04 -06:00
gamblor21
f61c4e62c1 Removing from smaller builds 2020-11-11 10:24:33 -06:00
Scott Shawcroft
e02539bdf5
Merge pull request #3633 from ITACAInnovation/patch-2 
Update pins.c
 2020-11-04 10:30:09 -08:00
ITACA Innovation S.R.L
ca935c0daf
Update pins.c 
Changed builtin to standard
 2020-11-03 21:22:19 +01:00
Scott Shawcroft
441c2c41fb
Merge pull request #3641 from adafruit/6.0.x 
Merge 6.0.x bugfixes to main
 2020-11-03 09:46:44 -08:00
Dan Halbert
1f7a3f0dfa Rev C Feather M4 CAN pin changes 2020-11-02 15:28:30 -05:00
Brian Dean
041c2a9f61 .../boards/bdmicro_vina_d51: PAD updates for better resource flexibility. 2020-11-02 08:35:25 -05:00
ITACA Innovation S.R.L
4e52757f26
Update pins.c 
Added LED, BOOST_EN and VEXT_SELECT pins.
 2020-11-01 22:22:55 +01:00
Jerry Needell
1762a36438 restore analogio to feather_m0_rfm9x/rfm69 builds 2020-11-01 05:46:13 -05:00
Dan Halbert
144eb131ae
Merge pull request #3627 from adafruit/6.0.x 
Merge 6.0.x bugfixes to main
 2020-10-31 12:28:20 -04:00
ITACA Innovation S.R.L
9a8484b853
Update mpconfigboard.h 
Removed ignore PA30 PA31 in order to allow using them as pinout
 2020-10-31 11:06:56 +01:00
ITACA Innovation S.R.L
a7616808e9
Updated pinout 2020-10-31 10:12:49 +01:00
Dan Halbert
59b9ca409c matrixportal ESP TX and RX pins were swapped 2020-10-28 20:33:10 -04:00
Scott Shawcroft
54c0e98a37
Fix openbook build 2020-10-27 13:58:23 -07:00
Jeff Epler
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x 
Merge in two fixes from 6.0.x
 2020-10-21 20:12:20 -05:00
Scott Shawcroft
eb139c9bab
Correct pins to not reset. 
They must have the PORT_ prefix otherwise they mask the wrong pins.

Fixes #3552
 2020-10-19 17:41:16 -07:00
Jeff Epler
194d99f588 sparkfun_lumidrive: Can't IGNORE pins that are default bus pins 
The SDA, SCL, and MISO pins were ignored.  This error was not diagnosed
before now.
 2020-10-17 20:08:32 -05:00
Scott Shawcroft
878f2322e7
Merge pull request #3564 from BHDynamics/dynossat_edu 
Add DynOSSAT-EDU boards
 2020-10-16 11:30:42 -07:00
Enrique Casado
6631c8d393 Add USB VID&PID 2020-10-16 13:52:46 +02:00
Dan Halbert
12ed3fc72f disable on winterbloom_sol and thunderpack 2020-10-15 18:48:28 -04:00
Dan Halbert
f51e75c1d2 cxd56 needed more precise include for __packed; needed SRC_C += on some ports 2020-10-15 15:24:24 -04:00
Dan Halbert
82b49afe43 enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit 2020-10-15 11:27:21 -04:00
Enrique Casado
97fae54659 Add DynOSSAT-EDU boards 2020-10-15 12:39:14 +02:00
Brian Dean
852a91e1b7 boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen). 2020-10-14 08:29:28 -04:00
Brian Dean
2b33968a1e Add new board to atmel-samd port: bdmicro_vina_d51 2020-10-13 16:46:25 -04:00
Scott Shawcroft
bb046f9983
Merge pull request #3540 from WarriorOfWire/async_syntax 
__await__ magic method and async/await
 2020-10-12 15:31:43 -07:00
Kenny
10badd93c3 leftover newlines 2020-10-11 22:52:27 -07:00
Kenny
94beeabc51 remove unnecessary board configuration and address feedback 2020-10-11 22:42:59 -07:00
Kenny
3c46e3a6aa
Turn off async for circuitplayground express 
Firmware too large
 2020-10-11 08:16:36 -07:00
warriorofwire
f5f1e29dc0 disable async/await on a several small ucontrollers 2020-10-10 15:43:12 -07:00
lady ada
70a94c8d2d fix for https://github.com/adafruit/circuitpython/issues/3534 2020-10-10 12:27:35 -04:00
Scott Shawcroft
5ac3c36d64
Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107 
New quirk for sh1107
 2020-09-30 12:03:10 -07:00
Jeff Epler
2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate 
Update make translate script
 2020-09-29 14:32:49 -05:00
microDev
4c7d9e3aaf
Update make translate script 2020-09-29 11:14:30 +05:30
mdroberts1243
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107 2020-09-28 19:40:47 -04:00
Anson He
96323ac3ac Default power on Wio Terminal's 40 Pin 2020-09-27 10:21:25 +08:00
Jeff Epler
791d20f16c give qtpy haxpress its own USB PID 2020-09-26 11:45:53 -05:00
Jeff Epler
9944935fde qtpy haxpress: enable RTC 2020-09-26 11:33:10 -05:00
Mark Roberts
22a7696fac Changes take 2: missed ugame10 board 2020-09-25 22:17:59 -04:00
Mark Roberts
b921543571 Requested changes take 1 2020-09-25 21:27:29 -04:00
Jeff Epler
eadb4de144 qtpy_m0_haxpress: add 2020-09-24 16:58:24 -05:00
Scott Shawcroft
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0 
fix pins for rev C
 2020-09-23 11:31:28 -07:00
lady ada
9db7625717 neopix is default on! 2020-09-23 11:19:01 -04:00
lady ada
5384479a61 fix pins for rev C 2020-09-22 23:28:23 -04:00
Jeff Epler
4e4853dcb2 common.template.ld: remove unneeded line 2020-09-21 16:44:26 -05:00
Jeff Epler
df379b84cb remove unneeded symbols 2020-09-21 16:44:26 -05:00
Jeff Epler
09f8a83a75 samd: template.ld: put canram in its own output section 2020-09-21 16:44:26 -05:00
Jeff Epler
a76119afcb add _canio to Feather M4 CAN 2020-09-21 16:44:26 -05:00
Jeff Epler
a2e1867f69 _canio: Minimal implementation for SAM E5x MCUs 
Tested & working:

 * Send standard packets
 * Receive standard packets (1 FIFO, no filter)

Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.

Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
 2020-09-21 16:44:26 -05:00
Dan Halbert
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21 
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
 2020-09-19 13:41:21 -04:00
Scott Shawcroft
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid 
Automate USB VID/PID Uniqueness Check
 2020-09-17 11:48:46 -07:00
Brian Dean
81ee874531 pins.c: fix trailing whitespace 2020-09-16 16:40:04 -04:00
Brian Dean
847d609ddc rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately 2020-09-16 16:27:24 -04:00
Scott Shawcroft
95e27bb8bf
Add more PIDs for unique boards 2020-09-15 13:43:35 -07:00
Dan Halbert
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can 
atmel-samd: add same51, feather_m4_can
 2020-09-14 23:57:51 -04:00
Jeff Epler
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode 
Add esp32s2 safe mode support & fix user_safe_mode output
 2020-09-13 14:18:59 -05:00
microDev
36da92075b Update safe mode reason 2020-09-13 22:57:24 +05:30
microDev
5deac8d249 Update board specific safe mode message 2020-09-13 18:22:40 +05:30
lady ada
2fac4851a5 fix typo, tested hardware, neopixel doesnt work tho 2020-09-12 19:56:13 -04:00
lady ada
6fff4ec00d cutie variant 2020-09-12 19:00:26 -04:00
Jeff Epler
cacb0124ac feather_m4_express: Use quad data mode on flash 
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.

Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
 2020-09-10 20:20:21 -05:00
Jerry Needell
2529ee2359 freeze rfm69 and bus_device libraries int feather_m0_rfm69 2020-09-09 14:54:20 -04:00
Jeff Epler
e066448e36 atmel-samd: add same51, feather_m4_can 
This is compile-tested, and requires updates in the related submodules:

https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37

This should not be merged until those can also be merged.
 2020-09-08 13:06:45 -05:00
Dan Halbert
960888a3bd fix pins for trellis_m4 board.I2C() 2020-09-03 14:22:18 -04:00
Scott Shawcroft
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci 
_bleio HCI implementation
 2020-09-01 11:28:05 -07:00
Dan Halbert
4ac7650f22 matrix portal board 2020-08-31 23:56:38 -04:00
Dan Halbert
6dbd369272 merge from upstream 2020-08-30 14:39:03 -04:00
lady ada
81870413af add default I2C 2020-08-28 19:08:36 -04:00
Scott Shawcroft
0cc438e6b9
Fix pycubed pwm use 2020-08-24 18:29:34 -07:00
Dan Halbert
f714f53552 Merge remote-tracking branch 'adafruit/main' into ble_hci 2020-08-21 10:45:05 -04:00
Dan Halbert
0e30dd8bcc merge from upstream; working; includes debug_out code for debugging via Saleae for posterity 2020-08-20 20:29:57 -04:00
Jeff Epler
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory 
Update mini sam m4 memory
 2020-08-20 19:05:39 -05:00
Benjamin Shockley
135626a038
Update mpconfigboard.mk 
Added support for second type of memory chip.
 2020-08-20 13:50:52 -05:00
Brent Rubell
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x 
RFM9x -- freeze library into build
 2020-08-17 17:11:35 -04:00
Dan Halbert
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50 
The ja translation was not fitting.
 2020-08-17 10:05:25 -04:00
Dan Halbert
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size 
Squeeze firmwares to fit the new ja translation
 2020-08-13 12:19:28 -04:00
Jeff Epler
239c8ff87f metro_m0_express: put back audiobusio 
this now fits locally (though it's very close to capacity);
let's see what the CI says.

```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express  TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
 2020-08-12 19:11:33 -05:00
Jeff Epler
aa0b4f7045 cpx_display: Put back AUDIOBUSIO, take away ROTARYIO 
AUDIOBUSIO is needed for the on-board mic using PDMIn
 2020-08-12 16:17:48 -05:00
Jeff Epler
ea8e9b8cef metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO 
Dan notes that this is more frequently the solution we've chosen
 2020-08-12 16:17:13 -05:00
Jeff Epler
299894025a stringcar_m0_express: make ja translation fit 2020-08-12 13:47:10 -05:00
Jeff Epler
f08ee0db20 itsybitsy_m0_express: make ja translation fit again 2020-08-12 13:44:00 -05:00
Jeff Epler
7bd42244c9 snekboard: make ja translation fit 2020-08-12 13:34:36 -05:00
Jeff Epler
45f6bc1f3e serpente: make ja translation fit 2020-08-12 13:32:08 -05:00
Jeff Epler
36bfbaae69 feather_radiofruit_zigbee: make ja translation fit 2020-08-12 13:28:30 -05:00
Jeff Epler
813dcd1b73 trinket_m0_haxpress: make ja translation fit 2020-08-12 12:44:17 -05:00
Jeff Epler
88f222f1a1 metro_m0_express: make ja translation fit 2020-08-12 12:38:17 -05:00
Jeff Epler
ba91023fff itsybitsy_m0_express: make ja translation fit 2020-08-12 12:35:29 -05:00
Jeff Epler
6b9f7c9047 hallowing_m0_express: make ja translation fit 2020-08-12 12:29:30 -05:00
Jeff Epler
58afda342d feather_m0_supersized: make ja translation fit 2020-08-12 11:53:34 -05:00
Jeff Epler
27c2eb1869 feather_m0_express: make ja translation fit 2020-08-12 11:51:56 -05:00
Jeff Epler
8865e4ca97 circuitplayground_express_displayio: make ja translation fit 2020-08-12 11:46:52 -05:00
Jeff Epler
f3748fe20d circuitbrains_basic_m0: Use optimization flags to let ja translation fit 2020-08-12 11:46:31 -05:00
bleeptrack
49407b6c06 trailing spaces fix 2020-08-12 13:42:45 +02:00
bleeptrack
e34fac6645
Whitespace and Newline fix 2020-08-11 23:59:32 +02:00
bleeptrack
228d9b5a12
Fixing indentation 2020-08-11 22:18:15 +02:00
bleeptrack
22ae1dbac8
Removing unnecessary pin ignored 2020-08-11 22:17:17 +02:00
bleeptrack
00676ff5a9
PicoPlanet 2020-08-11 21:49:52 +02:00
Jerry Needell
f7961b96a9 update comment 2020-08-06 10:05:18 -04:00
Jerry Needell
c42ffb8f3d remove usb_hid 2020-08-06 05:44:26 -04:00
Jerry Needell
432f43a472 freeze rfm9x and BusDevice, remove many built-in modules 2020-08-05 11:37:57 -04:00
Dan Halbert
0a60aee3e4 wip: compiles 2020-08-02 11:36:38 -04:00
Dan Halbert
1771858f4a add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes 2020-08-01 13:20:46 -04:00
Dan Halbert
4b71831d8b
SUPEROPT_VM = 0 for de_DE 2020-08-01 12:36:20 -04:00
Jeff Epler
27c6ffb9a2 atmel-samd: gemma, trinket: Make space for de_DE translation 2020-07-30 11:29:47 -05:00
Jeff Epler
d69f081c04 Merge remote-tracking branch 'origin/main' into blm_badge 2020-07-30 07:24:48 -05:00
Joey Castillo
8acec2ca35 add descriptive pin names 2020-07-29 13:49:08 -04:00
Joey Castillo
ea9bc9b4b6 set screen orientation to portrait 2020-07-29 13:46:10 -04:00
Dan Halbert
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins 
fluff_m0: add pin aliases
 2020-07-28 15:15:15 -04:00
Scott Shawcroft
b30d89131b
Merge pull request #3215 from ansonhe97/main 
Added display QSTR to Wio Terminal
 2020-07-28 11:53:17 -07:00
Dan Halbert
aa97ea2501 Merge remote-tracking branch 'adafruit/main' into blm_badge 2020-07-28 14:15:02 -04:00
Dan Halbert
e5e132a364 add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT 2020-07-28 11:49:54 -04:00
ansonhe97
e15bcebb6e Added display QSTR to Wio Terminal 2020-07-28 17:31:17 +08:00
Jerry Needell
945736e9bb add adjustments for crickit and displayio variants of CPX 2020-07-27 22:13:04 -04:00
Jerry Needell
2bdd62220e adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice 2020-07-27 21:50:36 -04:00
Scott Shawcroft
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2 
ndgGarage ndbit6 v2
 2020-07-27 15:51:23 -07:00
Radomir Dopieralski
b2c4b0bcfa fluff_m0: don't exclude portb pins explicitly 2020-07-26 17:26:32 +02:00
Radomir Dopieralski
b1b253c012 fluff_m0: add pin aliases 
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.

Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
 2020-07-26 13:39:42 +02:00
Dan Halbert
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test 
Changes to allow different compiler optimizations per board
 2020-07-25 17:03:10 -04:00
Dan Halbert
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2 
Add GamePad to Commander board
 2020-07-25 16:57:58 -04:00
Chris Burton
c4a5297ee2 Add GamePad to Commander 2020-07-25 17:53:27 +00:00
ikigaisense
6696915801 fix-ndbit6-for-ndbit6_v2 2020-07-25 10:07:33 -06:00
root
739981b34e update for pewpew 2020-07-24 17:27:25 -05:00
root
b9cdf195e2 board mk file changes 2020-07-24 10:00:42 -05:00
root
c937fa1760 fix formatting 2020-07-23 19:29:57 -05:00
root
778e8bfda9 Changes to optimization option 2020-07-23 19:27:02 -05:00
ikigaisense
703fb9d4a1 update-ndGarage_ndbit6_v2 2020-07-23 16:08:30 -06:00
root
d83a4ac72d Changes to add compiler optimization option 2020-07-22 12:44:41 -05:00
DavePutz
39e01c3938
Merge pull request #14 from adafruit/main 
update from main
 2020-07-22 11:30:49 -05:00
Scott Shawcroft
8ff2846bb2
Disable countio on circuitbrains basic 2020-07-21 16:21:49 -07:00
Scott Shawcroft
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack 
Enable PYSTACK to keep function state out of the heap
 2020-07-21 13:38:52 -07:00
Scott Shawcroft
5e3a853db4
Turn off GC opt on uchip board 2020-07-21 12:51:59 -07:00
Scott Shawcroft
678faff464
Be more aggressive with uChip build 2020-07-21 11:02:23 -07:00
root
49decf90c9 Add option for higher optimization levels 2020-07-21 10:11:08 -05:00
Scott Shawcroft
0c6935e336
Merge branch 'main' into disable_network 2020-07-20 16:28:22 -07:00
Scott Shawcroft
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc 
Add _bhb user module for Big Honking Button
 2020-07-20 16:24:36 -07:00
Thea Flowers
7ba89f5330 Add _bhb user module for Big Honking Button 
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
 2020-07-18 22:45:08 -07:00
Radomir Dopieralski
11ef43b071 pewpew_m4: Disable USB_HID back 
German translation fails to build, so I have to disabled USB_HID after
all.
 2020-07-18 20:09:30 +02:00
Radomir Dopieralski
8d692f33a8 pewpew_m4: Enable analogio and usb_hid 
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.

If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
 2020-07-18 19:30:40 +02:00
Scott Shawcroft
610e0171aa
Disable existing native networking. 
We're moving towards a co-processor model and a Wiznet library is
already available.

New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
 2020-07-17 17:43:02 -07:00
Jeff Epler
6912d31560 uchip: reclaim some flash space 2020-07-17 14:32:05 -05:00
Dan Halbert
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level 
SAMD: make the brownout detection level configurable per board
 2020-07-13 16:26:11 -04:00
Radomir Dopieralski
742f9cfdb0 Fluff M0: additional pins on version 1.3 of the board 2020-07-10 20:40:58 +02:00
Radomir Dopieralski
e0733d153e SAMD: configurable brownout, separate the variables 2020-07-09 12:17:07 +02:00
Radomir Dopieralski
83a27edd20 SAMD: make the brownout detection level configurable per board 
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.

In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
 2020-07-08 19:59:53 +02:00
Scott Shawcroft
846f01b2c8
Merge pull request #3113 from ansonhe97/main 
ADD: Added Wio Terminal's functional pins and LCD driver to board init
 2020-07-06 14:50:47 -07:00
ndgarage
e514782cc6 update-with-new-usb-PID 2020-07-04 10:39:21 -06:00
ansonhe97
36ef3476de Fix depreciate terminology 2020-07-04 11:21:58 +08:00
ansonhe97
2ecb46f192 Fix CI 2020-07-03 13:42:27 +08:00
ansonhe97
2a92cf8d8b ADD: Added LCD driver to board init 2020-07-03 12:44:20 +08:00
ansonhe97
49aacc8596 ADD: Fixed wrong SPI pins and added more functional pins 2020-07-03 12:43:21 +08:00
Scott Shawcroft
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0 
Fluff M0: additional pins on version 1.3 of the board
 2020-07-02 15:43:32 -07:00
Radomir Dopieralski
fce35c3481 Fluff M0: additional pins on version 1.3 of the board 2020-07-02 22:57:58 +02:00
ndgarage
0537f4e775 restore-ndgarage_ndbit6-to-original 2020-07-01 14:12:52 -06:00
ndgarage
c759c9a2aa add-ndgarage_ndbit6_v2-update 2020-07-01 13:58:07 -06:00
svgops
b80dbb4b2c add-ndgarage_ndbit6_v2 2020-07-01 12:06:59 -06:00
ansonhe97
d4e28dd233 ADD: added more special pins on Wio Terminal 2020-07-01 17:06:26 +08:00
Scott Shawcroft
74ad5e80ce
Merge pull request #3089 from ansonhe97/main 
Add: added Seeed's Wio Terminal Board Support
 2020-06-30 10:58:24 -07:00
ansonhe97
4613f80d7a Fix end of line 2020-06-29 17:41:48 +08:00
ansonhe97
0dd17f4418 Add: Added Seeed Wio Terminal board support 2020-06-29 16:22:41 +08:00
Jeff Epler
f496c0b58d atmel-samd: Add SDIO SD card interface 2020-06-26 11:50:42 -05:00
Dan Halbert
759929c24a hci early wip; refactor supervisor bluetooth.c for nrf: tested 2020-06-25 20:57:17 -04:00
Jeff Epler
1d2cc0b968 I2CPeripheral: Rename class and its module 
This is an incompatible change.
 2020-06-25 11:44:19 -05:00
Jeff Epler
076a96ccc6
Merge pull request #3046 from jepler/same51 
Add basic SAM E54  support and SAM E54 Xplained board
 2020-06-25 06:55:27 -05:00
Jeff Epler
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices 
Compute USB_DEVICES instead of requiring it to be specified
 2020-06-24 13:31:56 -05:00
Jeff Epler
f232aef786 supervisor.mk: Compute USB_DEVICES; remove from boards and ports 
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
 2020-06-23 12:59:01 -05:00
Jeff Epler
38659b566c atmel-samd: Finish disabling USB MIDI and/or HID on certain boards 2020-06-23 10:56:27 -05:00
Jeff Epler
d5074220a8 atmel-samd: Add SAM E54 Xplained board 
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
 2020-06-23 10:41:48 -05:00
Scott Shawcroft
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board 
PID request for a new board configuration
 2020-06-22 15:09:42 -07:00
Jeff Epler
d43449a6d6 sparkfun samd51 thing plus: Fix board.I2C() 
This had the SDA and SCL pins transposed, so nothing worked.
 2020-06-22 10:45:27 -05:00
Florin Trutiu
b316549590 Added the new assigned VID/PID pair 2020-06-19 19:26:29 +03:00
Florin Trutiu
178be2e3c9 loc_ber_m4_base_board 2020-06-19 18:56:20 +03:00
Diego Elio Pettenò
dd5d7c86d2 Fix up end of file and trailing whitespace. 
This can be enforced by pre-commit, but correct it separately to make it easier to review.
 2020-06-03 10:56:35 +01:00
Scott Shawcroft
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0 
Add support for Fluff M0
 2020-05-26 13:18:55 -07:00
Radomir Dopieralski
4974c933b1 Fix swapped SCK and MISO in Fluff M0 2020-05-26 03:29:05 +02:00
Jeff Epler
5cffd7e88d trinket_m0_haxpress: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
eb85304d04 escornabot: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
03866c0598 meowmeow: disable modules to make build fit with upcoming translations 2020-05-23 20:41:25 -05:00
Jeff Epler
2ed40075a5 pyruler: disable RTC to make build fit with upcoming translations 2020-05-23 20:36:33 -05:00
Radomir Dopieralski
4c01ddcbab Add support for Fluff M0 2020-05-22 18:51:12 +02:00
jason
4f54514be4 Initial version 2020-05-20 21:11:06 -05:00
Scott Shawcroft
acf4b1bede
Remove reverse methods from per-board defs 2020-05-19 11:43:57 -07:00
Scott Shawcroft
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins 2020-05-19 10:55:02 -07:00
Scott Shawcroft
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2 2020-05-18 16:46:41 -07:00
Dan Halbert
e175a64036
disable rotaryio in CPX crickit 2020-05-15 20:35:12 -04:00
Scott Shawcroft
8edb8e87c8
Turn reverse methods off for trinket haxpress 2020-05-15 17:22:22 -07:00
Scott Shawcroft
86f865afe0
Turn reverse methods off for cpx_crickit 2020-05-15 16:42:22 -07:00
Dan Halbert
a3ca9401b4
Shrink crickit build 2020-05-15 18:29:37 -04:00
Scott Shawcroft
80129c5a21
Disable countio on trinket haxpress 2020-05-12 18:55:49 -07:00
Scott Shawcroft
277e8d528b
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 18:22:57 -07:00
warriorofwire
5a80f5e606 nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size 2020-05-12 15:23:00 -07:00
Scott Shawcroft
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio 2020-05-12 12:29:05 -07:00
Scott Shawcroft
bc40034a08
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 12:12:51 -07:00
Daniel Pollard
62bdfb74e3 removed lib from catwan_usbstick - updated transalations overflowed 2020-05-12 16:40:23 +10:00
Daniel Pollard
5e5461e77e removed countio from catwan_usbstick build 2020-05-12 16:32:35 +10:00
Daniel Pollard
ee2cb703c8 merged master 2020-05-12 14:41:28 +10:00
warriorofwire
206d0e598a Add vectorio: for drawing shapes 
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
 2020-05-09 15:38:22 -07:00
Dan Halbert
8d00d99ca0
Shrink hallowing_m0_express to fit ko build 2020-05-08 22:51:21 -04:00
Daniel Pollard
7f1be814c8 changed build variables as per advice 2020-05-06 09:04:15 +10:00
Daniel Pollard
f63ee9fb9b excluded countio from other smaller boards 2020-05-05 16:15:57 +10:00
Daniel Pollard
d5c24b99b8 hallowing m0 - exclude countio 2020-05-05 16:04:28 +10:00
Dan Halbert
602eabe668
Squeeze hallowing_m0_express build slightly 
ko build is a little too big.
 2020-05-04 17:18:53 -04:00
Dan Halbert
c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Scott Shawcroft
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power. 
Enable pixelbuf in its place because we'll need it soon.
 2020-04-29 13:57:09 -07:00
Max Holliday
6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Scott Shawcroft
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Max Holliday
86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Lucian Copeland
c6c77726e7 Merge remote-tracking branch 'upstream/master' into stm32-docfix 2020-04-23 13:39:48 -04:00
Lucian Copeland
8791ca6af3 implement requested changes 2020-04-23 13:33:41 -04:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power 
This isn't perfect and needs a bit more testing.
 2020-04-20 18:25:13 -07:00
Scott Shawcroft
a4d86b96fd
Merge pull request #2777 from pewpew-game/master 
Fix RGB/BGR colors in Stage
 2020-04-20 15:25:29 -07:00
Jeff Epler
5fcc6d6286 RGBMatrix: finish renaming from Protomatter 
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
 2020-04-17 18:44:07 -05:00
Radomir Dopieralski
43022d8294 Add copyrights to pewpew m4 and ugame board.c 2020-04-17 09:50:11 +02:00
Radomir Dopieralski
f39ca6052e Fix RGB/BGR colors in Stage 
This makes the colors used by the stage library compatible with those
used by the displayio library.
 2020-04-15 23:41:38 +02:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler
759fdffda5 Update ports/atmel-samd/boards/pyportal_titano/board.c 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Jeff Epler
a51d4f7a45 pycubed: add trailing newline to file 
POSIX specifies that text files end in a trailing newline
 2020-04-14 18:24:54 -05:00
Sabas
cac4fb0318
Merge branch 'master' into nfc_copy 2020-04-09 17:05:11 -05:00
sabas1080
49771b4d7f Update to v1.3 2020-04-09 14:27:51 -05:00
Max Holliday
826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Brian Dean
7cfa8e1a68 board_vina_m0:pins.c: PGM_LED is on PA28 not PA15. 2020-03-29 18:59:00 -04:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity 
Add polarity and phase to FourWire.
 2020-03-28 07:28:37 -05:00
Scott Shawcroft
798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft
b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
Brian Dean
7fa38e8725 Update board name to bdmicro_vina_m0 to eliminate hyphens. 2020-03-27 13:37:59 -04:00
Brian Dean
14a1e5756e Merge branch 'master' of https://github.com/adafruit/circuitpython 2020-03-26 20:28:54 -04:00
Brian Dean
2ae9edcbff Add new board BDMICRO 'Vina M0'. 
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c

This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.

Has been extensively tested with CircuitPython and works well.
 2020-03-26 20:15:54 -04:00
Scott Shawcroft
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight 
Add backlight polarity flag to Display
 2020-03-26 14:00:47 -07:00
Thea Flowers
ff67571e9a Add GD25Q64C as a flash chip for Sol 2020-03-26 12:33:27 -07:00
siddacious
9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
Chris Burton
5e559be9b5 Remove Adafruit_CircuitPython_CircuitPlayground 2020-03-24 21:10:34 +00:00
Chris Burton
39a19d54c2 Add support for Commander 2020-03-22 16:23:56 +00:00
Scott Shawcroft
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button 
Add board support for Winterbloom Big Honking Button
 2020-03-18 17:37:59 -07:00
Thea Flowers
e027aaf433 Remove some build options, fix order of boards in build.yml 2020-03-18 16:49:10 -07:00
Thea Flowers
7332adfa21 Add board support for Winterbloom Big Honking Button 2020-03-18 16:29:44 -07:00
Scott Shawcroft
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab 
update ulab
 2020-03-17 15:33:08 -07:00
Jeff Epler
d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Szymon Klause
c9aa50817c add UARTLogger2 board support for CircuitPython 2020-03-13 21:39:17 +01:00
Dan Halbert
210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Thea Flowers
409a4a9490 Disable the HID USB descriptor for Sol 
It's not used and ends up being confusing for folks.
 2020-03-04 23:22:46 -08:00
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
Jeff Epler
fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
jepler
f20255813f samd51 thing plus: new port 
testing performed:
 * successfully store and retrieve a 500kB file on the flash
 * square wave output on each pin appears on o'scope
 * board.SPI(), board.SERIAL(), board.I2C() all construct
 2020-02-25 11:52:23 -06:00
Dan Halbert
dcc8abf74e
Merge pull request #2638 from fgallaire/master 
Arduino Nano 33 IoT support
 2020-02-22 00:12:06 -05:00
Florent Gallaire
96db16a7a2 Last NINA pins 2020-02-22 04:30:18 +01:00
Florent Gallaire
39ec5d0e51 Add NINA pins 2020-02-21 01:34:52 +01:00
Florent Gallaire
fba0b302ff Add Arduino Nano 33 IoT support 2020-02-19 08:56:06 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master 
New board: PyCubed + updates to SAM32 board
 2020-02-18 22:01:41 -05:00
Max Holliday
2b79d8ffe9 adding PWM to board.c for external WDT 2020-02-18 14:16:54 -08:00
Max Holliday
93760042fa no current need for NVM 2020-02-16 11:43:19 -08:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Max Holliday
b91c4e66cb adding Adafruit_CircuitPython_Register to frozen + updating SAM32 2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e adding new board - PyCubed 
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
 2020-02-08 15:33:25 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master 
update rotation so 0 is the default, for much faster ondiskbitmaps
 2020-02-07 12:59:30 -05:00
Lady Ada
789e311b63 update rotation so 0 is the default, for much faster ondiskbitmaps 2020-02-06 16:28:02 -05:00
neubauek
d93d491a61 Cleaned up CircuitBrains Basic and Deluxe board definitions 2020-02-06 14:47:22 -06:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
neubauek
f3188669e4 Added CircuitBrains Basic and Deluxe Boards 2020-02-05 14:52:47 -06:00
Dan Halbert
a4ebd2f7c1 allow tuple or list for Palette color 2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert
3b95d7c16a add gamepad to specialty cpx builds; update frozen libs 2020-01-30 21:00:47 -05:00
Dan Halbert
6f13979c9b pygamer and pybadge boards were not resetting neopixels 2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6 2020-01-23 12:32:19 -05:00
ndgarage
4675783545 change-name-to-ndgarage_ndbit6 2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc init nfc copy 2020-01-22 20:30:33 -06:00
Dan Halbert
4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8 Merge remote-tracking branch 'origin/master' into capablerobot-usbhub 2020-01-20 13:11:57 -05:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed 
CircuitPython support for the Open Book
 2020-01-15 17:21:19 -05:00
dalegrover
d6e657b593 Initial commit. 2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247 add support for the Open Book 2020-01-14 16:34:46 -05:00
scs217
50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217
18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217
c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Scott Shawcroft
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2 
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
 2020-01-07 12:08:59 -08:00
Radomir Dopieralski
59ded1131f Take display offsets for PewPew M4 from the bootloader config 
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
 2020-01-06 14:24:30 +01:00
Marius-450
3ad3d49959 changes only for monster m4sk 2020-01-04 12:32:49 -05:00
Dan Halbert
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update 
Update the PewPew M4 board and circuitpython-stage
 2020-01-01 13:59:02 -05:00
Scott Shawcroft
0223589e6c
Fix default UART too 2019-12-30 11:34:51 -08:00
Scott Shawcroft
e1d026f815
Update pins.c 2019-12-30 11:33:04 -08:00
Radomir Dopieralski
b06057395b Update PewPew M4 
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
 2019-12-23 18:37:36 +01:00
Scott Shawcroft
f60b6481e0
Turn off gamepad on cpx crickit 2019-12-20 12:14:27 -08:00
Scott Shawcroft
b859e2b710
Remove re from CPX Displayio build to make space. 2019-12-20 11:43:56 -08:00
Jeff Epler
d31a387ace circuitplayground_express_displayio: reduce inlining to make .ko translation fit 2019-12-19 16:11:29 -06:00
ndgarage
16688180c6 add-ndbit6 2019-12-19 07:17:43 -07:00
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk 2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk 2019-12-16 12:18:16 +05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Jeff Epler
a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Jeff Epler
002f5c0f1c samd: trinket_m0: make board fit again 2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9 2019-12-02 07:27:03 -06:00
Jeff Epler
d843156a5e samd: Consolidate small build optimization flags 
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
 2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a Squeeze pyruler zh_Latn_pinyin 2019-11-27 14:47:35 -05:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master 
Add shIRtty board
 2019-11-26 15:23:56 -05:00
Dan Halbert
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name 
Set USB_INTERFACE_NAME for winterbloom_sol
 2019-11-26 15:17:14 -05:00
Thea Flowers
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol 2019-11-26 10:59:12 -08:00
Thomas Sarlandie
2647ea0754 fix: disable touchio to save some space 2019-11-26 19:26:18 +01:00
Scott Shawcroft
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space 
Once we use PixelBuf, the library will be much smaller.
 2019-11-26 09:31:44 -08:00
Jeff Epler
82f55dc046 atmel-samd: reduce inlining on constrained boards again 
pewpew10, pirkey_m0, and uchip all fit now.  However, pirkey_m0
now has just 76 bytes flash available.
 2019-11-26 08:50:55 -06:00
Jeff Epler
3ed6de7baf atmel-samd: reduce inlining on pyruler again 
By tweaking the optimizer flags further, this build also fits
 2019-11-26 08:50:55 -06:00
Jeff Epler
2e4a6b94e7 atmel-samd: get most constrained m0 builds to work again 
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
 2019-11-26 08:50:45 -06:00
Thomas Sarlandie
11dc572bce feature: our own PID - thanks @ladyada 2019-11-25 21:56:42 +01:00
Thomas Sarlandie
fc71ed9789 add shirtty board - hackaday supercon 2019 addon 2019-11-25 17:44:41 +01:00
Dan Halbert
13375d16f1 change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
Dan Halbert
e18d3e0f76 Merge branch 'master' into m4-network-ps2io 2019-11-22 15:02:52 -05:00
Dan Halbert
1a62a9cb17 remove network from kicksat_sprite 2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700 turn off network in pewpew_m4 2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874 Merge remote-tracking branch 'adafruit/master' into testing-fixes 2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5 enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00
wallarug
fce7b89087 removed Robo HAT MM1 M0 board. 2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719 add-ndbit6 2019-11-19 14:52:09 -07:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description 
... to "StringCarM0Ex"
 2019-11-16 16:40:40 -08:00
KalbeAbbas
8134ceec83
Update pins.c 2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c 2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c 2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f updated 2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11 
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. 
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
 2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator 
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
 2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf Add board configuration for Winterbloom Sol 2019-11-04 23:11:42 -08:00
brentru
2f04c5891f flip it around 2019-10-31 14:11:50 -04:00
brentru
ab3da3071c flip MADCTL BGR bit to reflect RGB colors 2019-10-31 10:11:47 -04:00
ladyada
d2b613134d we should use native rotation, and tweak madctl (not done yet) 2019-10-29 22:53:44 -04:00
ladyada
1e869d1334 switch to 8-bit mode - tested on hardware! 2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f wip 2019-10-28 18:15:02 -04:00
ProductDev
4cd5571203 Adds builds for sparkfun_qwiic_micro with and without flash 2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX 2019-10-17 18:02:05 +11:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder 2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs 2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions 2019-10-14 11:55:22 -07:00
Chris Osterwood
137a4f8a5d Added new flash SKU for production hardware 2019-10-07 14:50:39 -04:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production 
Robo HAT MM1 - Fixes after testing
 2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a serpente: Update PID and enable as many modules as we can fit 2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb fix spi 2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3 fixed SPI on M4 2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0 updated robohatmm1_m0 2019-09-26 20:02:09 +10:00
wallarug
39265fccf3 included a version number 2019-09-26 19:22:51 +10:00
wallarug
db9495b04b updated board name 2019-09-26 19:21:53 +10:00
wallarug
08b0f80879 updated board name 2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0 remove frozen busio library 2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682 updated pins.c 2019-09-26 19:18:50 +10:00
wallarug
70860e1352 robohatmm1 removed uart and put in correct order 2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b Added TFT pins to HalloWing M4 for code compatibility 2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
341428b4da Added SPEAKER pin to HalloWing M4 for code compatibility 2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9 Added TOUCH pins to HalloWing M4 for code compatibility 2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support 2019-09-17 10:40:07 -07:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master 
Add support for Serpente boards
 2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language 2019-09-16 11:51:46 +02:00
Kattni Rembor
c94310411b Update board def, enable touchio 2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e Add support for Serpente boards 2019-09-14 16:06:28 +02:00
Radomir Dopieralski
d50ed3b6e7 Add support for PewPew M4 board 2019-09-05 10:50:33 +02:00
Scott Shawcroft
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x 2019-08-29 14:38:16 -07:00
Scott Shawcroft
0aa5507c4c
add additional pin aliases 2019-08-29 13:41:28 -07:00
Scott Shawcroft
84839de56f
Hallowing M4 2019-08-29 10:34:46 -07:00
Scott Shawcroft
0876d5c4ad
Disable bitbangio on Itsy M0 
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
 2019-08-27 15:21:47 -07:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review 2019-08-23 15:27:21 -07:00
Scott Shawcroft
b992ca80e7
Rejigger builds to fit under 50 minute limit 2019-08-22 20:29:58 -07:00
Scott Shawcroft
72e7ffa324
More cleanup 2019-08-22 16:16:09 -07:00
Scott Shawcroft
fd8050b369
Turn off features to make room for ePaper 2019-08-22 15:19:45 -07:00
Scott Shawcroft
9993a99906
Add initial Monster M4SK build 2019-08-22 14:24:32 -07:00
Scott Shawcroft
3a98de1236
Add reset() to display busses to detect whether it works 2019-08-22 14:23:33 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out 
NOT TESTED! Just compiles

Fixes #1691
 2019-08-22 14:23:27 -07:00
Dan Halbert
7cc15e56c8 make translate 2019-08-22 15:20:23 -04:00
Dave Astels
d547d59cba Merge remote-tracking branch 'adafruit/master' into displayio_fill_area 2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263 Make room 2019-08-21 14:46:10 -04:00