eefb6842a0
i2cslave: Fix missing translate() when raising exceptions
...
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
2018-08-18 16:00:06 +02:00
1a6f6ff8e4
Merge pull request #1122 from Jahor/patch-1
...
Fix PWM Support on port 1 of NRF52840
2018-08-17 16:54:03 -07:00
4a4d84ba42
Merge pull request #1064 from notro/i2cslave
...
Add busio.I2CSlave
2018-08-17 16:51:45 -07:00
18e9f74738
Fix PWM Support on NRF52840
...
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
2018-08-17 19:34:03 +12:00
e8cf6a9072
Update to merged peripheral change.
2018-08-16 18:05:53 -07:00
96534e598e
Fix unix coverage and update translations.
2018-08-16 17:41:53 -07:00
76e0373576
Fix nrf and unix
2018-08-16 17:41:38 -07:00
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
de5a9d72dc
Compress all translated strings with Huffman coding.
...
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.
Builds without LTO work as well but include both untranslated
strings and compressed strings.
This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531 .
2018-08-16 17:40:57 -07:00
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
b6822b86ac
busio/I2C: Split out samd_i2c_get_sercom()
...
It will be shared with I2CSlave.
2018-08-16 17:06:40 +02:00
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings
...
Fixes and translate more strings.
2018-08-09 20:00:18 -04:00
24e53ad591
Rework escaping and fix ESP build.
2018-08-09 15:58:45 -07:00
86d2154d71
Change file mode back.
2018-08-09 09:14:14 -07:00
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
b0e33f6a11
atmel-samd: UART: allocate rx buffer in long-lived region
...
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.
However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
2018-08-08 19:21:57 -05:00
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel
...
Retune neopixel timings on SAMD51. They were too slow.
2018-08-07 21:33:12 -04:00
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow.
...
Fixes #1083
2018-08-07 16:58:37 -07:00
933add6cd8
Support internationalisation.
2018-08-07 14:58:57 -07:00
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
64e5691fe7
Update to peripherals merge.
2018-08-02 13:59:12 -07:00
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity.
2018-08-02 11:07:22 -07:00
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing.
2018-08-02 00:51:52 -07:00
0bc3432106
Merge branch 'master' into nrf52_sys_module
2018-08-01 11:53:12 +07:00
65bd07bb0b
Merge pull request #1074 from hathach/nrf52840_usb_hid
...
Nrf52840 usb hid
2018-08-01 00:47:50 -04:00
592c190069
PR review clean up
2018-08-01 11:31:32 +07:00
8640d37149
try to address sys module, compile ok
2018-08-01 10:19:20 +07:00
200669216e
more clean up
2018-08-01 08:52:07 +07:00
bac233e99b
clean up
2018-08-01 08:47:41 +07:00
533d8dda96
fix samd usb hid typo
2018-08-01 08:40:04 +07:00
6ddd8583da
clean up
2018-08-01 08:20:20 +07:00
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-)
2018-07-31 12:42:21 -07:00
1e524f1b98
Merge branch 'master' into nrf52840_usb_hid
2018-08-01 00:58:23 +07:00
85bd46a4e1
enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS
2018-07-31 23:09:39 +07:00
4bece22c92
add hid keyboard LED indicator stub
2018-07-31 23:02:15 +07:00
05139e2aee
all hid devices seems to be ok
2018-07-31 22:54:26 +07:00
2c85f42330
add usb hid syscontrol
2018-07-31 21:57:00 +07:00
ef58adacd3
usb hid consumer control works
2018-07-31 21:19:02 +07:00
fd661c1d57
improve usb hid
2018-07-31 21:06:24 +07:00
b334289669
Reenable LTO for debug.
2018-07-31 05:18:23 -07:00
12cf5e51c2
Allow for resizing the stack area.
2018-07-31 05:18:23 -07:00
777542c716
Add basic memory allocation outside Python runtime
...
This allows for the heap to fill all space but the stack. It also
allows us to designate space for memory outside the runtime for
things such as USB descriptors, flash cache and main filename.
Fixes #754
2018-07-31 05:18:03 -07:00
27b2a9fe59
add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO
2018-07-31 17:50:32 +07:00
d15caf0dbd
hid keyboard and mouse work well
2018-07-31 16:42:04 +07:00
221d54a595
workaround to use lib/utils/interrupt_char.c
2018-07-31 14:28:34 +07:00
ae783b0b1a
update tinyusb, set scsi sense key for unsupported commands
2018-07-31 13:54:58 +07:00
a6d94b6845
Merge pull request #1068 from dhalbert/micropython-25ae98f-merge
...
Micropython 25ae98f
2018-07-30 12:33:44 -07:00
fbe98ff9a9
Merge pull request #1071 from dhalbert/3.x-hallowing
...
add HalloWing
2018-07-29 20:24:47 -04:00
680597547c
add HalloWing
2018-07-29 19:22:16 -04:00
bfbb5cde5a
put back test in qemu-arm build
2018-07-28 23:40:17 -04:00
2e260a0eab
Merge remote-tracking branch 'adafruit/master' into micropython-25ae98f-merge
2018-07-28 14:13:54 -04:00
f48b70050e
merge finished
2018-07-28 13:29:47 -04:00
368d59796f
adding usb_hid
...
compiled with undefined ref
2018-07-27 17:36:41 +07:00
21339c4155
house keeping
2018-07-27 17:22:21 +07:00
e86f7d0b88
add usb msc callback description
2018-07-27 00:17:14 +07:00
5bdf40901f
update tusb lib
2018-07-26 17:16:41 +07:00
bc760dd341
WIP: complete manual inspection of all significant changes
2018-07-23 21:34:25 -04:00
bb28faf39c
arturo182 review
2018-07-17 23:57:49 +07:00
a0b9871ba9
use seperate interrupt_char.c for nrf
...
move usb descriptors into usb.c
2018-07-17 21:52:20 +07:00
d4e84a9bd4
Merge branch 'master' into fix_nrf52840_serial
2018-07-17 21:27:16 +07:00
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
2809b4f9dd
Merge branch 'master' into micropython-25ae98f-merge
2018-07-16 19:36:40 -04:00
a20ab40ed2
Merge 3.0.0 final bugfixes and changes to master
2018-07-16 09:01:46 -04:00
e2e01efa84
compiles and runs; hangs on import storage;storage.VfsFat.<tab>
2018-07-13 22:51:10 -04:00
bfe14ff824
Merge pull request #1014 from arturo182/nrf_shared_ble
...
nrf: Split the ble module into a shared part and the port implementation
2018-07-13 10:23:37 -04:00
414267388d
Merge pull request #1023 from arturo182/nrf_pyocd
...
nrf: Fix flashing with pyocd
2018-07-13 10:02:20 -04:00
05c1384b67
nrf: Split the ble module into a shared part and the port implementation
...
This allows other ports to implement these shared bindings.
2018-07-13 16:01:15 +02:00
883ca21321
nrf: Fix flashing with pyocd
2018-07-13 15:22:46 +02:00
9729fc3d31
nrf: Fix BLE on nRF52840 after adding the USB functionality
2018-07-13 14:55:02 +02:00
7c219600a2
WIP: after merge; before testing
2018-07-11 16:45:30 -04:00
873e20273e
fix travis build
2018-07-12 02:17:55 +07:00
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
4962468fff
Merge pull request #1011 from arturo182/nrf_cleanup
...
nrf: More cleanup and porting
2018-07-10 15:44:30 -04:00
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
eab00ff140
nrf: Remove even more unused files
2018-07-10 14:59:22 +02:00
2c63fb2a94
nrf: Remove the random hal and module
...
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
2018-07-10 14:59:22 +02:00
1163462635
nrf: Remove the old time hal and replace with nRFx
2018-07-10 14:59:10 +02:00
e875f4e52e
Merge pull request #1002 from arturo182/nrfx_gpio
...
nrf: Rewrite the DigitalInOut hal using nRFx
2018-07-09 17:54:38 -07:00
8bb363f7c4
must set pull after setting direction with gpio_set_pin routines
2018-07-09 17:18:06 -04:00
0e819599e7
Merge branch 'master' into nrf52840_usbboot
2018-07-10 02:02:52 +07:00
7715d19efe
update bootloader hex
2018-07-10 01:20:37 +07:00
97a1ae911e
add family option for uf2
2018-07-10 01:18:14 +07:00
f199e87085
add ARRAY_SIZE
...
which is missing when building with debug mode
2018-07-10 01:06:57 +07:00
c5089d7274
generate uf2 by default
...
update tusb
2018-07-10 01:02:33 +07:00
64b9ee9c74
Merge pull request #985 from tannewt/heap_tweaks3
...
A few heap related tweaks
2018-07-08 23:21:38 -04:00
a45659c59a
Merge pull request #1000 from arturo182/nrfx_uart
...
nrf: Rewrite the UART HAL using nRFx
2018-07-08 20:17:47 -07:00
133b99b6f2
Merge pull request #999 from arturo182/nrf_mphalport
...
nrf: mphalport cleanup
2018-07-08 20:13:21 -07:00
fd5634e4aa
Merge pull request #992 from arturo182/nrf_i2c_fix
...
nrf: Fix I2C transfers with data larger than HW allows
2018-07-08 20:12:09 -07:00
388f554ff6
nrf: Rewrite the DigitalInOut hal using nRFx
2018-07-08 17:48:32 +02:00
25ece8fb3d
nrf: Rewrite the UART HAL using nrfx
2018-07-08 16:42:04 +02:00
c6a2a55bc9
nrf: Cleanup mpconfigboard files
...
All the removed defines were used by legacy modules that are now
removed.
2018-07-08 15:18:11 +02:00
887486582e
nrf: Remove port-specific help
...
It contains mentions to the pyb module which was removed.
The ble-specific help will be re-added later when the API
is stabilized.
2018-07-08 15:18:11 +02:00
1ea633c484
nrf: mphalport cleanup
2018-07-08 14:39:30 +02:00
da27253693
nrf: Fix I2C transfers with data larger than HW allows
2018-07-06 21:12:24 +02:00
ac74edb4e4
nrf: Fix SPI transfers with data larger than HW allows
2018-07-06 21:10:25 +02:00
baf68a936e
remove hal_time files
2018-07-06 15:59:20 +07:00
3e319694aa
mp_hal_delay_ms() to call background task
...
remove hal_time.c
2018-07-06 15:48:01 +07:00
948ddf8463
make SD default to s140 and s132 for nrf52840 and nrf52832
...
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
2018-07-06 14:39:49 +07:00
6ef3a0b181
implement filesystem_writable_by_python()
2018-07-06 13:01:07 +07:00
54179a0189
Use .s in samd Makefile too.
2018-07-05 04:44:00 -07:00
0806c0a38b
update fatfs cached sector when running write10
2018-07-05 17:43:38 +07:00
4e5d9a029d
clean up
2018-07-05 17:26:07 +07:00
0365912e28
implement msc with internal_flash api
...
Note: only work with SD is disabled.
2018-07-05 16:19:04 +07:00
3564e98181
implement msc flash, seems to work
2018-07-05 15:22:23 +07:00
1745e20391
replace jlink with native usb cdc for serial REPL
2018-07-05 11:30:12 +07:00
be2ff20e42
enable usb cdc interface
...
not handle anything yet.
2018-07-04 17:15:49 +07:00
7fff7f5e70
add usb msc support for nrf52840
2018-07-04 16:40:53 +07:00
8fb976f0bd
Split out assembly source files.
2018-07-03 07:25:54 -07:00
d9723bb613
include RTC fix for SAMd51 in circuitpython build
2018-07-03 06:52:05 -07:00
074c5ea144
Merge pull request #977 from dhalbert/update_crickit_libs-2
...
update crickit-related libs
2018-07-03 12:04:05 -07:00
bf9981e8db
bring all frozen libraries up to date
2018-07-03 14:39:21 -04:00
dbc977485c
Support gathering register values on nrf.
2018-07-03 06:31:07 -07:00
ec78d3cefd
Mark pointers in cpu registers as in use.
...
This prevents bugs where gc_collect is called from C code that did
a recent allocation.
2018-07-03 05:45:50 -07:00
46c453cf0a
add tinyusb as submodule
2018-07-03 17:46:08 +07:00
b14b28067e
Merge branch 'master' into nrf52840_usbboot
2018-07-03 17:29:28 +07:00
bf00cde37d
Comment tweak after board change
2018-07-02 14:51:06 -07:00
b91202969a
Merge pull request #982 from arturo182/nrf_makefile
...
nrf: Save some flash bytes by using extra compile flags
2018-07-02 14:33:47 -07:00
05a088b369
Merge pull request #972 from arturo182/nrf_i2c
...
nrf: Rewrite the I2C common-hal using nrfx
2018-07-02 14:33:06 -07:00
da491ec961
nrf: Save some flash bytes by using extra compile flags
...
Both of these are used in the atsamd port as well.
2018-07-02 22:00:04 +02:00
7c9a0e2996
remove unnecessary extern in nrf/mphalport.c
2018-06-29 16:06:51 -04:00
7028a399c2
remove previously added esp8266/mphalport.{c,h}
2018-06-29 16:04:18 -04:00
2a0b857643
implement mp_hal_delay_us() to not need interrupts, and use it
2018-06-29 16:01:46 -04:00
df4469f92b
Test the BOARD parameter for nullness; display a error if nothing provided
2018-06-29 12:22:31 -07:00
d392f01f2c
include RTC fix for SAMd51 in circuitpython build
2018-06-29 05:45:38 -07:00
b4fd77bb7c
fix nrf and esp8266 builds for OneWire fix
2018-06-29 00:00:05 -04:00
52a11547cb
fix OneWire timing and DigitalInOut.switch_to_input()
2018-06-28 23:32:20 -04:00
429168d4ac
Merge pull request #970 from arturo182/nrf_softdev
...
nrf: Remove unsupported softdevice defines
2018-06-28 14:01:19 -07:00
007155276a
Merge pull request #969 from arturo182/nrf_more_commonhal
...
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
2018-06-28 14:00:45 -07:00
039b4dc00a
Merge pull request #968 from arturo182/nrf_qstr
...
nrf: Remove old qstr defines
2018-06-28 13:57:46 -07:00
ae82a93b56
Merge pull request #967 from arturo182/nrf_os
...
nrf: Rewrite the os common-hal using nrfx
2018-06-28 13:55:34 -07:00
178c089045
nrf: Rewrite the I2C common-hal using nrfx
2018-06-28 22:45:02 +02:00
6e6a500801
nrf: Rewrite the os common-hal using nrfx
2018-06-27 21:01:07 +02:00
af5cb9c492
nrf: Remove unneeded hal files
2018-06-27 21:00:34 +02:00
b87bba8a28
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
2018-06-27 20:55:29 +02:00
1fa8fac5d7
nrf: Remove old qstr defines
...
These were used by the microbit music module, which was removed.
2018-06-27 20:52:13 +02:00
b9f02ca3c5
nrf: Remove unsupported softdevice defines
2018-06-27 20:48:57 +02:00
2a12fcd18b
nrf: Rewrite the AnalogIn common-hal using nrfx
2018-06-27 20:41:30 +02:00
c4f11dfd32
flash target update bootloader setting to skip crc checksum
2018-06-27 15:22:44 +07:00
8fbe1d73e9
clean up makefile
2018-06-27 15:13:20 +07:00
4920cc47ca
move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it
2018-06-27 14:31:08 +07:00
bed7310fd7
update bin files
2018-06-27 14:13:18 +07:00
ecd3993d43
update pin map for feather52840
2018-06-27 14:06:15 +07:00
1f3de5174e
Freeze Adafruit_CircuitPython_Crickit into crickit builds
2018-06-26 19:49:55 -04:00
91427b0b23
Merge pull request #959 from arturo182/nrf_spim
...
nrf: Rewrite the SPI common-hal using nrfx
2018-06-26 11:00:12 -07:00
d7d132d5a3
Merge pull request #960 from arturo182/nrf_stm_cleanup
...
nrf: Remove leftovers from stm32 code copy
2018-06-26 10:52:04 -07:00
16973d0559
nrf: Remove unused hal files
...
Makes it easier to keep track of what's left to rewrite.
2018-06-26 00:13:41 +02:00
2f1e678d60
nrf: Rewrite the SPI common-hal using nrfx
...
Use SPIM2 on nRF52832 and SPIM3 on nRF52840. SPIM3 is able to go
up to 32MHz!
2018-06-25 23:46:34 +02:00
b14d13e318
nrf: Remove leftovers from stm32 code copy
2018-06-25 23:38:10 +02:00
8d065fe0e6
update reamde
2018-06-26 00:16:58 +07:00
54547683f9
add uf2, bootloader target
2018-06-25 23:31:14 +07:00
4722371be9
update bootloader hex with uf2
2018-06-25 23:27:00 +07:00
f5be5ed6ee
Merge branch 'master' into nrf52840_usbboot
2018-06-25 17:12:24 +07:00
596a1d8843
nrf: Rename feather52 to feather52832 in readme files
2018-06-22 10:04:39 +02:00
a2ac7e4fc9
stm32/boards: Add .ld and af.csv files for STM32F722.
...
These files can also be used for F723, F732 and F733 MCUs.
2018-06-22 15:39:10 +10:00
ec7982ec6d
stm32/mboot: Add support for erase/read/write of external SPI flash.
...
This patch adds support to mboot for programming external SPI flash. It
allows SPI flash to be programmed via a USB DFU utility in the same way
that internal MCU flash is programmed.
2018-06-22 15:30:34 +10:00
7f41f73f0f
stm32/qspi: Don't require data reads and writes to be a multiple of 4.
...
Prior to this patch the QSPI driver assumed that the length of all data
reads and writes was a multiple of 4. This patch allows any length. Reads
are optimised for speed by using 32-bit transfers when possible, but writes
always use a byte transfer because they only use a single data IO line and
are relatively slow.
2018-06-22 15:07:01 +10:00
de4cd1ee73
add pins D3/D4 to pins.c
...
fixes #948
2018-06-20 22:26:59 -04:00
25e71a56d4
nrf: Update the PCA10056 example to use new pin naming
2018-06-20 23:39:36 +02:00
deec17e4fe
nrf: Remove really old examples
...
These examples rely on machine and pyb modules, so they have to get.
Leaving 3 BLE examples that also rely on those modules, but can be
fixed to use CP's modules.
2018-06-20 23:38:18 +02:00
9c08db55ff
nrf: Cleanup machine and microbit leftovers
...
The music module was useful when this port had support for the
microbit, now that it was removed, it's not so useful.
2018-06-20 23:30:34 +02:00
c2d4d0a10b
nrf: Simplify pin generation and definition
...
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
2018-06-20 23:26:32 +02:00
ff918556cd
nrf: Simplify the board makefiles
...
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
2018-06-20 21:21:45 +02:00
5509f394dc
nrf: Add a nrfx submodule and prepare for using the new drivers
2018-06-20 20:43:59 +02:00
7cd34f2a94
nrf: Cleanup Makefile after nrf51 removal
2018-06-20 18:21:18 +02:00
97f10241f9
nrf: Fix default board after feather52 rename
2018-06-20 18:21:18 +02:00
b47a67d566
nrf: Remove machine, pyb and utime modules
...
Micropython legacy, keeping it consistent with atsam port.
2018-06-20 18:21:18 +02:00
80d16cb7df
add pins D3/D4 to pins.c
...
fixes #948
2018-06-19 22:34:29 -04:00
561ae9a91b
stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio.
...
Fixes issue #3880 .
2018-06-20 12:24:18 +10:00
5962c210c5
stm32/mboot: Define constants for reset mode cycling and timeout.
...
And fix timeout value so that it does actually finish with reset_mode=1.
2018-06-19 23:23:17 +10:00
61437106e7
update bootloader for feather nrf52840
2018-06-19 15:27:07 +07:00
6d2702ed98
Merge branch 'master' into nrf52840_usbboot
2018-06-19 14:50:17 +07:00
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6
...
nrf: Use the production version of s140 6.0.0
2018-06-18 16:29:41 -07:00
feee808955
nrf: Use the production version of s140 6.0.0
2018-06-18 23:12:28 +02:00
05547b72ac
Switch to Feather52s full name to avoid confusion with the nrf52840 later.
...
Fixes #940
2018-06-18 10:51:04 -07:00
e49cd106b4
stm32/spi: Fix SPI driver so it can send/recv more than 65535 bytes.
...
The DMA peripheral is limited to transferring 65535 elements at a time so
in order to send more than that the SPI driver must split the transfers up.
The user must be aware of this limit if they are relying on precise timing
of the entire SPI transfer, because there might be a small delay between
the split transfers.
Fixes issue #3851 , and thanks to @kwagyeman for the original fix.
2018-06-18 17:41:14 +10:00
338af99a7f
stm32/can: Use MP_OBJ_ARRAY_TYPECODE_FLAG_RW where appropriate.
2018-06-18 13:42:05 +10:00
ca2b1d6b36
stm32/boards/NUCLEO_F091RC: Add Arduino-named pins and rename CPU pins.
...
To match pin labels on other NUCLEO 64 boards.
2018-06-18 13:06:27 +10:00
0d3de68669
stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs.
2018-06-18 13:05:24 +10:00
a5f5552a0a
tests/unix/extra_coverage: Don't test stream objs with NULL write fun.
...
This behaviour of a NULL write C method on a stream that uses the write
adaptor objects is no longer supported. It was only ever used by the
coverage build for testing the fail path of mp_get_stream_raise().
2018-06-18 12:35:56 +10:00
ceff433fcc
stm32/mboot: Adjust user-reset-mode timeout so it ends with mode=1.
...
If the user button is held down indefinitely (eg unintenionally, or because
the GPIO signal of the user button is connected to some external device)
then it makes sense to end the reset mode cycle with the default mode of
1, which executes code as normal.
2018-06-18 12:23:27 +10:00
be5eb91df8
Merge pull request #938 from sommersoft/esp_busio_fix
...
ESP8266: Fix pin locking during busio.SPI.configure
2018-06-16 11:49:20 -04:00
a5e03b76a6
Split out the peripherals library in preparation of sharing with MakeCode.
2018-06-15 16:16:21 -07:00
9fc0ec6af8
Merge pull request #934 from microbuilder/usbboot
...
[WIP] nRF52840 USB Bootloader
2018-06-15 09:35:30 -07:00
34b2f6b6fc
esp32/modules: Include umqtt library in frozen modules.
2018-06-15 16:39:49 +10:00
d61d119c94
esp32: Update to latest ESP IDF.
2018-06-15 16:23:53 +10:00
23b6d33455
fixes #642 ; spi_init_gpio() is now bypassed for both construct and configure
2018-06-15 05:03:52 +00:00
7be4a23c0c
stm32/i2cslave: Fix ordering of event callbacks in slave IRQ handler.
...
It's possible (at least on F4 MCU's) to have RXNE and STOPF set at the same
time during a call to the slave IRQ handler. In such cases RXNE should be
handled before STOPF so that all bytes are processed before
i2c_slave_process_rx_end() is called.
2018-06-15 14:15:31 +10:00
bc5e8a2cb6
stm32/i2c: Fix num_acks calculation in i2c_write for F0 and F7 MCU's.
...
Due to buffering of outgoing bytes on the I2C bus, detection of a NACK
using the ISR_NACKF flag needs to account for the case where ISR_NACKF
corresponds to the previous-to-previous byte.
2018-06-15 14:10:53 +10:00
fa814a32ce
Make Trinket M0 build fit; make RAMFS in vfs_fat_* tests be compliant with expected API
2018-06-14 21:02:12 -04:00
37a7257aff
stm32/timer: Support TIM1 on F0 MCUs.
2018-06-15 10:50:08 +10:00
e724bc1c4e
Fix playing audio from SD card
2018-06-14 18:47:40 -04:00
cc5a94044a
drivers/memory/spiflash: Rename functions to indicate they use cache.
...
This patch renames the existing SPI flash API functions to reflect the fact
that the go through the cache:
mp_spiflash_flush -> mp_spiflash_cache_flush
mp_spiflash_read -> mp_spiflash_cached_read
mp_spiflash_write -> mp_spiflash_cached_write
2018-06-14 16:52:56 +10:00
335d26b27d
stm32/boards/STM32L476DISC: Update SPI flash config for cache change.
2018-06-14 16:52:56 +10:00
35d38dbfed
update nrf52840 bootloader hex
2018-06-13 17:27:55 +07:00
cf1509c911
esp32/fatfs_port: Implement get_fattime so FAT files have a timestamp.
...
Fixes issue #3859 .
2018-06-13 14:13:34 +10:00
618943d90a
Merge pull request #926 from nickzoic/circuitpython-nickzoic-716-pulseio-esp8266
...
Implement pulseio.PulseIn and PulseOut for ESP8266 #716
2018-06-12 18:33:16 -07:00
ee817a2fa8
Correct UART reads to return error on timeout.
...
This causes read to correctly return None instead of b''.
Fixes #874
2018-06-12 14:03:27 -07:00
4691b30c02
PDMIn: turn serializer on when starting DMA
2018-06-12 12:35:51 -04:00
5042d98514
stm32/Makefile: Rebuild all qstrs when any board configuration changes.
2018-06-12 13:53:43 +10:00
0501427907
esp32: Remove port-specific uhashlib implementation and use common one.
...
Now that the common module has mbedtls support for both SHA1 and SHA256 it
can now be used on this port.
2018-06-12 13:50:11 +10:00
565f590586
ports: Enable IOBase on unix, stm32, esp8266 and esp32.
...
It's a core feature, in particular required for user-streams with uasyncio.
2018-06-12 12:29:26 +10:00
b2fa1b50ed
ports: Call gc_sweep_all() when doing a soft reset.
...
This calls finalisers of things like files and sockets to cleanly close
them.
2018-06-12 11:56:25 +10:00
73dadb0669
Update to the latest ASF4 which includes an I2C timeout extension while waiting for clock stretching.
...
Fixes #778
2018-06-11 18:37:48 -07:00
068ffd04a6
Merge pull request #919 from adafruit/jerryneedell-patch-2
...
fix #918
2018-06-10 09:17:49 -04:00
f72dcc64e6
Fixes #918 (PulseIn.get_paused) ...
2018-06-10 22:37:15 +10:00
b25cbd340b
Merge commit '2129bbe160278f7cd2cece939f81900a41f8aa86' into circuitpython-nickzoic-716-pulseio-esp8266
2018-06-10 22:08:58 +10:00
972b03850f
Merge branch 'master' into circuitpython-nickzoic-716-pulseio-esp8266
2018-06-10 22:01:35 +10:00
8150150a24
return "false" for stub call
...
See #918 for discussion
2018-06-10 07:11:44 -04:00
2129bbe160
Update PulseIn.c
2018-06-10 07:08:56 -04:00
5724fd795a
fix #918
...
Add stub for common_hal_pulseio_pulsein_get_paused to make ESP8266 build compatible with PR #901
2018-06-10 05:59:20 -04:00
b2d98edb4e
Merge pull request #901 from tannewt/pulseio_too_fast
...
Prevent freezing USB during high frequency PulseIn.
2018-06-08 17:59:06 -04:00
8fb34a5846
Use bool not int.
2018-06-08 14:57:20 -07:00
8195df1b55
Stub out get_paused in nrf builds.
2018-06-08 14:01:54 -07:00
66b79723b6
Add code size analysis tool and shrink samd.clock a smidge.
2018-06-08 12:56:32 -07:00
769788d3c7
Turn off USB pin objects since they are always used for USB.
2018-06-08 12:56:32 -07:00
383bf9a59e
Wait for the DFLL to be stable.
2018-06-08 12:56:32 -07:00
07a8899c72
Support M4
2018-06-08 12:56:32 -07:00
2fbab8067a
Prevent freezing USB during high frequency PulseIn.
...
We now track the last time the background task ran and bail on the
PulseIn if it starves the background work. In practice, this
happens after the numbers from pulsein are no longer accurate.
This also adjusts interrupt priorities so most are the lowest level
except for the tick and USB interrupts.
Fixes #516 and #876
2018-06-08 12:56:32 -07:00
218930d18b
Check for PDMIn DMA getting stuck.
2018-06-08 08:23:52 -04:00
418e28c7dc
update nrf52840 bootloader hex and target
2018-06-08 16:10:49 +07:00
2b3436e87c
add feather nrf52 uart rts, cts support
2018-06-08 15:59:38 +07:00
c10899d13f
allow to flash feather52 and feather52840 with jlink
...
add crc bypass magic to bootloader settting
2018-06-08 15:11:17 +07:00
6af1fbacc9
Work on pulseio.PulseOut for #716 ESP8266
...
Switch to ets_delay_us but the PWM is still way too slow to be useful.
2018-06-08 16:41:42 +10:00
011edf2472
Clean up interrupt handling for pulseio.PulseIn implementation for #716 ESP8266
2018-06-08 15:31:16 +10:00
24c416cc66
stm32/mboot: Increase USB rx_buf and DFU buf sizes to full 2048 bytes.
...
The DFU USB config descriptor returns 0x0800=2048 for the supported
transfer size, and this applies to both TX (IN) and RX (OUT). So increase
the rx_buf to support this size without having a buffer overflow on
received data.
With this patch mboot in USB DFU mode now works with dfu-util.
2018-06-08 15:29:52 +10:00
c4cf1c5221
Initial pulseio.PulseOut implementation for #716 ESP8266
2018-06-08 15:28:05 +10:00
7adc69baf9
Initial pulseio.PulseIn implmentation for #716 ESP8266
2018-06-08 15:27:59 +10:00
039f196c56
esp32/modnetwork: Fix isconnected() when using static IP config.
...
Currently <WLAN>.isconnected() always returns True if a static IP is set,
regardless of the state of the connection.
This patch introduces a new flag 'wifi_sta_connected' which is set in
event_handler() when GOT_IP event is received and reset when DISCONNECTED
event is received (unless re-connect is successful). isconnected() now
simply returns the status of this flag (for STA_IF).
The pre-existing flag misleadingly named 'wifi_sta_connected" is also
renamed to 'wifi_sta_connect_requested'.
Fixes issue #3837
2018-06-08 13:13:21 +10:00
190c7dba89
stm32/mpconfigport.h: Enable DELATTR_SETATTR and BUILTINS_NOTIMPLEMENTED
...
MICROPY_PY_DELATTR_SETATTR can now be enabled without a performance hit for
classes that don't use this feature.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED is a minor addition that improves
compatibility with CPython.
2018-06-08 12:55:18 +10:00
93150a0d40
ports: Enable descriptors on stm32, esp8266, esp32 ports.
...
They are now efficient (in runtime performance) and provide a useful
feature that's hard to obtain without them enabled.
See issue #3644 and PR #3826 for background.
2018-06-08 12:23:08 +10:00
ba7e0e2f86
Add Adafruit to other M4 board name strings
2018-06-07 13:39:04 -04:00
7b2875d54a
Add Adafruit to board name string
2018-06-07 13:33:13 -04:00
0ab2a60dcd
Update ItsyBitsy board name to one word
2018-06-07 13:12:44 -04:00
c854e2dc17
Merge branch 'master' into usbboot
2018-06-07 13:51:21 +07:00
9bb4ded5fa
Merge remote-tracking branch 'upstream/master'
2018-06-07 13:50:04 +07:00
fadd6bbe43
unix/moduos_vfs: Add missing uos functions from traditional uos module.
...
Now that the coverage build has fully switched to the VFS sub-system these
functions were no longer available, so add them to the uos_vfs module.
Also, vfs_open is no longer needed, it's available as the built-in open.
2018-06-06 14:28:23 +10:00
1d40f12e44
unix: Support MICROPY_VFS_POSIX and enable it in coverage build.
...
The unix coverage build is now switched fully to the VFS implementation, ie
the uos module is the uos_vfs module. For example, one can now sandbox uPy
to their home directory via:
$ ./micropython_coverage
>>> import uos
>>> uos.umount('/') # unmount existing root VFS
>>> vfs = uos.VfsPosix('/home/user') # create new POSIX VFS
>>> uos.mount(vfs, '/') # mount new POSIX VFS at root
Some filesystem/OS features may no longer work with the coverage build due
to this change, and these need to be gradually fixed.
The standard unix port remains unchanged, it still uses the traditional uos
module which directly accesses the underlying host filesystem.
2018-06-06 14:28:23 +10:00
f35aae366c
extmod/vfs_fat: Rename FileIO/TextIO types to mp_type_vfs_fat_XXX.
...
So they don't clash with other VFS implementations.
2018-06-06 14:28:23 +10:00
9ba6990228
Feather M0 Express build with Crickit libraries
2018-06-05 18:21:47 -04:00
74ced174ce
Merge pull request #898 from dhalbert/feather_m4_d4
...
add PA14 as D4 to Feather M4 Express
2018-06-05 11:41:31 -04:00
7e7e33e460
add PA14 as D4 to Feather M4 Exprses
2018-06-05 08:15:34 -04:00
aace60a75e
esp8266/modules/ntptime.py: Remove print of newly-set time.
...
It should be up to the user if they want to print the new time out or not.
Fixes issue #3766 .
2018-06-05 14:30:35 +10:00
a90124a9e2
esp32: Add support for building with external SPI RAM.
...
This patch adds support for building the firmware with external SPI RAM
enabled. It is disabled by default because it adds overhead (due to
silicon workarounds) and reduces performance (because it's slower to have
bytecode and objects stored in external RAM).
To enable it, either use "make CONFIG_SPIRAM_SUPPORT=1", or add this line
to you custom makefile/GNUmakefile (before "include Makefile"):
CONFIG_SPIRAM_SUPPORT = 1
When this option is enabled the MicroPython heap is automatically allocated
in external SPI RAM.
Thanks to Angus Gratton for help with the compiler and linker settings.
2018-06-05 13:57:59 +10:00
bc92206f89
esp32/Makefile: Extract common C & C++ flags for consistent compilation.
2018-06-05 13:05:12 +10:00
Noralf Trønnes
Scott Shawcroft
Egor Leonenko
ladyada
hathach
Dan Halbert
Jeff Epler
Scott Shawcroft
arturo182
mrmcwethy
Scott Shawcroft
Damien George
jerryneedell
rolandvs
sommersoft
Nick Moore
Glenn Moloney
Kattni Rembor
Angus Gratton