2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
Scott Shawcroft
brentru
Dan Halbert
shazz
Elvis Pfützenreuter
Scott Shawcroft
Chris Osterwood
sabas1080
ladyada
wallarug
ladyada
ITACA Innovation S.R.L
Radomir Dopieralski
siddacious
Max Holliday
Melissa LeBlanc-Williams
Sabas
Justin R. Cutler
John Reese
caternuson
sommersoft
TG-Techie
Elias Santistevan
ShawnHymel
Roy Hooper
TG-Techie
Benjamin Shockley
ATMakersBill
Nick Moore
Paul Sajna
Pierrick C