de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
fb6b438580
Make `getpass` and `traceback` full build only
...
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.
Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote
2021-08-11 13:43:59 -07:00
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
...
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
2021-08-11 12:19:16 -07:00
7f016ae11e
Fix build with filter to do OR
2021-08-11 12:10:51 -07:00
083960ce90
Fix SAMD51 builds and Prox Trinkey
...
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
ebf0901558
Merge pull request #5079 from dhalbert/debug-audio
...
Fix various RP2040 and SAMD audio issues
2021-08-11 11:19:53 -07:00
b56455ffbb
Allow sleep while paused
2021-08-11 10:48:39 -07:00
67c6932ca2
Reset timers separate from pwmio
...
This prevents timer leakage on builds without pwmio.
Fixes #5057
2021-08-11 09:58:31 -07:00
f0859ac954
Switch SAMD21 ticks to PER event
...
The EVSYS is used to generate an interrupt from the event. This
simplifies timing used in pulseio that conflicted with the
auto-reload countdown.
Fixes #3890
2021-08-10 15:23:45 -07:00
e741330ca8
Consistent pin naming for SparkFun MicroMod processor boards.
2021-08-09 23:10:52 -07:00
93c9d59960
Merge branch 'main' into getpass
2021-08-10 01:00:10 +05:30
2451c788f4
valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad
2021-08-09 09:47:13 -04:00
59b89fdc5c
Fix various audio DMA issues:
...
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`
RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
2021-08-09 09:47:13 -04:00
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
51f8603783
add getpass module
2021-08-09 17:50:28 +05:30
579194a543
Colocated board.LED and D13 together (GCM4)
2021-08-09 05:35:38 +02:00
a15ac65fa0
Add board.LED for Grand Central M4 Express
...
Fixes #5111
2021-08-08 21:43:12 +02:00
063e3946d6
Merge pull request #5094 from jepler/quirc
...
Add qrio: Decode QR codes with quirc lib
2021-08-07 09:30:20 +05:30
be2342f32f
Merge pull request #5072 from microDev1/traceback
...
Add traceback module
2021-08-06 12:10:17 -07:00
821f3d5532
board bdmicro_vina_d51: Add support for MX25L12833F flash chip. Add QSPI activity indicator LED. Add D15-D19 as aliases for the I2S peripheral pins.
2021-08-05 09:14:51 -04:00
ac4b10bcd9
It's "shared-module", not "shared-modules"
2021-08-03 10:37:47 -05:00
d5cdceb9b9
Use all 4 status pixels on neotrinkey too
2021-07-28 14:25:21 -07:00
e9369d50e1
Merge pull request #5067 from tannewt/pulseout_switch
...
Switch to pin, frequency and duty_cycle PulseOut
2021-07-28 14:58:06 -04:00
f371c0a609
add traceback module
2021-07-28 18:06:23 +05:30
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad
...
remove gamepad; deprecate gamepadshift
2021-07-27 11:35:06 -04:00
901a6c27c0
remove gamepad; deprecate gamepadshift
2021-07-26 22:15:09 -04:00
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch
2021-07-26 18:48:59 -07:00
412eb87080
Switch to pin, frequency and duty_cycle PulseOut
...
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0
This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.
Most of the way for #3264
Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
11ca505fdb
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
f3a286a7ea
can we add busdevice and have room?
2021-07-25 14:45:35 -04:00
70cbb4eddb
Support multiple status neopixels
...
Use the 10 neopixels on the playgrounds for status.
Fixes #5039
2021-07-23 15:17:09 -07:00
f84cb94819
Remove OSError(0) and old network modules
...
The newer modules are `socketpool` and `ssl`.
Fixes #3924 , related to #2021 , closes #1880 , closes #2273 , closes #2274
2021-07-21 17:33:40 -07:00
fece0fb432
Fix crash when UART construct fails
...
After the script stops with the exception thrown the final gc_sweep
will call any finalizers and they usually call deinit. deinit on
invalid objects can wreak havoc by changing random memory or
(hopefully) crashing. This fixes ensures the object is deinited
until initialization succeeds and the object is valid.
Do the same fix for I2C and SPI too.
Fixes #4700 and fixes #5005
2021-07-20 17:15:19 -07:00
e042d54702
Fix three boards and xtensa cache key
2021-07-16 11:15:05 -07:00
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
35030fbb30
added pin object to analogout
2021-07-12 20:33:42 -04:00
0e88b77b3e
Merge pull request #4977 from pewpew-game/samd21-filesystem-size
...
Allow changing size of the filesystem on samd21 per board
2021-07-09 11:00:13 -07:00
825a706135
Turn off MIDI on one build, fix name.
2021-07-08 17:31:10 -04:00
92fa1055ef
Allow changing size of the filesystem on samd21 per board
...
As the CircuitPython grows, it may at some point no longer be possible
to squeeze it on some of the flash-less SAMD21 boards, so it would be
good to have the option of shrinking the filesystem size on per-board
basis. This change allows to define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE
inside the board's mpconfigborard.h file.
2021-07-08 22:19:54 +02:00
d886e8041d
Turn off pwmio on meow meow for space reasons
2021-07-01 22:14:37 -04:00
33bbb8b1f4
RP2040 PWMAudioOut: Release DMA channels after play has finished.
2021-07-01 17:36:29 -04:00
1a076d34c9
PewPew M4: use keypad instead of gamepad
...
Since the new keypad module is taking over gamepad functionality,
I'm switching to it. If this works well, I will make the change
for the remaining boards.
2021-06-29 10:36:52 +02:00
b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events
...
keypad: support for vector and matrix key scanning
2021-06-24 10:25:21 -07:00
15fc4c21b6
Fix typo in pin names I2S_SDIN/SDOUT of Wio Terminal
2021-06-24 21:24:23 +09:00
ed41acd879
merge from upstream to fix translations
2021-06-21 08:26:44 -04:00
6dbeb75a4f
Merge pull request #4880 from jepler/esp32s2-imagecapture
...
Esp32s2: implement ParallelImageCapture
2021-06-19 16:17:56 -04:00
db297add67
fix other too-big builds
2021-06-18 13:20:31 -04:00
03adbbca7c
turn off keypad by default on all SAMD21, for now
2021-06-18 12:26:48 -04:00
04b69cde9b
turn off gamepad on most builds;turn off keypad where appropriate
2021-06-17 13:46:45 -04:00
4655a71793
Turn off keypad on some builds to avoid overflow
2021-06-15 14:11:04 -04:00
fd222dd066
Fix typo in Wio Terminal pin board.I2S_BLCK to I2S_BCLK (bit clock)
2021-06-15 20:51:55 +09:00
12d0e65a2a
Space out pin groups.
2021-06-14 15:37:02 -04:00
f96642de25
Add A0 as alias to pot pin.
2021-06-14 15:32:12 -04:00
268717e427
ParallelImageCapture: Switch to taking a list of pins
...
.. adopting validate_pins from RGBMatrix into shared-bindings
.. updating other platforms for API change
2021-06-10 11:15:18 -05:00
26a75f74ec
Merge pull request #4862 from DavePutz/issue_3383
...
Fix for issue #3383 - SAMD5x microcontroller.cpu.voltage
2021-06-09 14:42:27 -05:00
bc34403d71
Removed all references to MICROCONTROLLER_VOLTAGE_DISABLE
2021-06-09 10:46:14 -05:00
72db13fc2d
enable microcontroller.cpu.voltage on SAME54
2021-06-08 10:04:40 -05:00
b2dea8ae0d
Fix for issue #3383 - SAMD51 microcontroller.cpu.voltage
2021-06-05 16:17:14 -05:00
9cde8a2265
MicroMod SAMD51 - correct I2C_INT pin
2021-06-03 06:05:13 -04:00
26c6bd2346
MicroMod SAMD51 - correct SCL2
2021-06-03 05:39:09 -04:00
6e36f30d9f
MicroMod SAMDt1 - correct board nane
2021-06-03 05:36:05 -04:00
2b068414e1
Fix missing comma
...
Doh
2021-06-02 23:13:08 -04:00
0437199706
Fix some pin mappings
...
Conflicts:
ports/atmel-samd/boards/sparkfun_samd51_micromod/pins.c
2021-06-02 22:22:04 -04:00
4c493c86c8
Add Sparkfun MicroMod SAMD51
2021-06-02 22:05:58 -04:00
db1830d62b
Add Sparkfun MicroMod SAMD51
2021-06-02 21:53:23 -04:00
3930440bc5
Fix usb_cdc.enable(console=False, data=True)
2021-06-02 11:29:56 -04:00
892dfa84ed
Merge pull request #4826 from jepler/actions-windows-build
...
Check that select firmwares build on Windows with MSYS2
2021-06-01 13:04:06 -07:00
6b476c19ba
fix formatting
2021-05-29 08:10:10 -05:00
b0dd0e344c
Merge pull request #4772 from EmergReanimator/atmel-samd
...
[resolves #4771 ] DEBUG UART supported on ATMSAME5x
2021-05-28 20:05:06 -06:00
49db85cb3d
Check that select firmwares build on Windows with MSYS2
...
This configuration is used by @ladyada and more often than it should
we've discovered late that a change introduced problems building
there.
By adding this to regular CI, hopefully we learn about and fix these
issues sooner rather than later.
2021-05-28 16:47:29 -05:00
5eb4cc6489
Remove non-product Adafruit boards
2021-05-26 16:01:17 -04:00
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
7805392b9e
Update UART.c
...
Incorporating feedback: https://github.com/adafruit/circuitpython/pull/4772#discussion_r634112839
2021-05-19 20:19:16 +02:00
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
2b64b1d335
[ resolves #4771 ] DEBUG UART supported on ATMSAME5x
2021-05-17 21:22:24 +02:00
9752162508
Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins
...
Update various Trinkey pins and add _pixelbuf
2021-05-15 11:52:33 -04:00
ea0e18d2e0
fix logic for suppressing ja and ko clean builds when not necessary
2021-05-14 23:41:44 -04:00
1e2a945782
Make busio.SPI be NotImplementedError on proxlight to save space
2021-05-14 21:52:54 -04:00
5c33c9d597
Fix SAMD
...
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
990e58902d
add CIRCUITPY_PIXELBUF to all trinkeys; add NeoPixel to prox
2021-05-14 17:09:15 -04:00
6a2ba83e30
Update Rotary Trinkey and Slide Trinkey pins
2021-05-14 15:40:29 -04:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
0eb4b9b982
Merge pull request #4742 from kattni/led
...
Add LED pin to Adafruit boards.
2021-05-10 21:12:02 -04:00
294ef59f27
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
4eb4f14840
Merge pull request #4734 from dhalbert/dynamic-usb-fixes
...
fix HID; fix interface name table creation
2021-05-10 12:55:29 -07:00
44f162bb64
free up PA00 and PA01 on BHB
2021-05-09 10:19:48 -07:00
becff6f93d
restore pulseio to pirkey
2021-05-09 11:33:35 -04:00
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod
2021-05-05 17:51:52 -07:00
843598ec3a
fix more board builds
2021-05-05 18:44:27 -04:00
579cdf30f1
fix more build errors
2021-05-05 16:49:29 -04:00
c37f021791
regularize and shrink many builds
2021-05-05 12:35:41 -04:00
fc8e1c4c2e
address review comments
2021-05-05 12:35:12 -04:00
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
b35fa44c8a
Merge MicroPython 1.12 into CircuitPython
2021-05-03 14:01:18 -07:00
25ccd5d8f1
Merge pull request #4679 from t-ikegami/wio_add_pin_assign
...
Add DAC* and RTL_* pin assignments to Wio Terminal board.
2021-05-03 11:08:28 -07:00
94ed5e0048
Merge pull request #4696 from dhalbert/no-pulseio-on-small-boards
...
Include pulseio only on CIRCUITPY_FULL_BUILD
2021-05-03 09:35:29 -04:00
9ca0e689a5
Merge branch 'main' into wio_add_pin_assign
2021-05-03 09:33:18 -04:00
e475dc8899
Fix broken builds
2021-05-03 00:09:15 -04:00
07dab34294
re-enable for pirkey
2021-05-01 09:32:13 -04:00
dfa7c3d32d
codeformat: Fix handling of `**`
...
After discussing with danh, I noticed that `a/**/b` would not match `a/b`.
After correcting this and re-running "pre-commit run --all", additional
files were reindented, including the codeformat script itself.
2021-04-30 15:30:13 -05:00
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
353e55d710
Merge pull request #4688 from jepler/fix-pixelbuf-subscr
...
objtype: Restore our customized behavior of instance_subscr
2021-04-30 10:45:44 -04:00
be7b2b00a8
uncrustify with newer version of uncrustify
2021-04-30 10:40:12 -04:00
11a9372da3
Set Xtal, Aref, and NC pins to be IGNORE_ed in microcontroller.pin for Wio Terminal.
2021-04-30 13:06:09 +09:00
d79d6ba688
Add I2S_* pin assignments to Wio Terminal board.
2021-04-30 13:03:29 +09:00
b5efce12cd
delete hid .py; undo some debugging changes
2021-04-29 23:05:31 -04:00
5679eb4fd7
Merge pull request #4677 from skerr92/add-cp-sapling-rev-b
...
Add cp sapling rev b
2021-04-29 19:22:49 -05:00
8b611d4b6b
changing mpconfigboard makefile
2021-04-29 16:45:08 -06:00
90bdb25219
ignore some pins to reclaim flash space
2021-04-29 14:36:29 -05:00
6498684f5e
ignore some pins to reclaim flash space
2021-04-29 14:30:31 -05:00
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
555ade7ff3
final change to ja flags i think
2021-04-28 20:42:13 -06:00
8090af07dd
fix ja build issue
2021-04-28 19:14:45 -06:00
0d25b95f0d
Add definitions of PB2[4-9] pins to microcontroller.pin for atmel-samd.
2021-04-29 02:19:34 +09:00
22c4abd28f
Add DAC* and RTL_* pin assignments to Wio Terminal board.
2021-04-28 18:57:21 +09:00
8500e846c6
partially working
2021-04-27 23:53:23 -04:00
e85091193b
adding CP Sapling Rev B
2021-04-27 16:30:44 -06:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
4e1d2fa056
Adding clearer on-board DotStar pin names.
2021-04-27 12:52:24 -04:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
c26e49c2e6
wip: starting to try to compile
2021-04-25 23:17:41 -04:00
de3c5ff976
oh crud, i forgot a semicolon
2021-04-25 16:42:58 -07:00
4bafbca0c3
Trinkeys: Clear neopixels on board reset
2021-04-25 12:58:52 -07:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
ed374a89fb
Merge pull request #4655 from DavePutz/issue_4602
...
Issue 4602 - Correct timing of PulseOut on SAMD21
2021-04-24 10:45:10 -05:00
80e8b4ac14
Merge pull request #4635 from jepler/pcc
...
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-23 13:31:53 -07:00
34c4cc1bd9
samd: Rename dma_{allocate,free} channel
...
These are now used in the (video) parallel capture device as well.
2021-04-23 09:46:33 -05:00
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
0e2431048d
Fix PWMOut on SAMD21
2021-04-20 15:21:05 -05:00
46c9b1bc37
atmel-sam: Use DMA for ParallelImageCapture
...
This allows ctrl-c to interrupt the capture, and ensures we handle
interrupts & background tasks.
2021-04-20 13:52:44 -05:00
d50feebd2c
atmel-sam: Factor out find_sync_event_channel_raise
2021-04-20 13:33:11 -05:00
4dcbdac97e
Complete the 'horizontal_reference' rename
2021-04-20 11:33:32 -05:00
5c5736ee1e
atmel-sam: Allow PWM to go up to cpu_frequency/2
...
24MHz is the nominal external clock to use with OV7670. (My testing
was actually at 16MHz)
2021-04-20 10:22:21 -05:00
99799cded6
imagecapture: implement to review suggestions
2021-04-20 10:21:32 -05:00
2198b1a4df
Update mpconfigboard.h
2021-04-17 20:15:04 -05:00
fc4538f845
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-16 17:18:59 -05:00
b1f4a9a9fd
Merge pull request #4447 from tyomitch/patch-3
...
[synthio] add a simple MidiTrack implementation
2021-04-13 15:09:23 -07:00
9a3f04a1b8
Merge pull request #4599 from dhalbert/neopixel-trinkey-storage
...
Turn storage back on for NeoPixel Trinkey
2021-04-13 12:42:46 -04:00
1163af5d48
Merge pull request #4591 from jepler/same51-modules
...
same51: enable specific modules based on chip family
2021-04-13 11:47:08 -04:00
cc36402a64
turn storage back on
2021-04-13 11:06:59 -04:00
c6ee471b52
Merge branch 'main' of https://github.com/adafruit/circuitpython into patch-3
2021-04-13 00:32:19 -04:00
d136078768
try re-enabling storage
2021-04-12 22:17:20 -04:00
8053d4a7a3
remove neopixels
2021-04-11 22:33:03 -04:00
4f36504aeb
same51: enable specific modules based on chip family
...
closes #4590
2021-04-11 20:07:59 -05:00
42abb982fe
rename proxsense to proxlight
2021-04-11 18:39:14 -04:00
9dc6d691b8
add prox trinkey and rename others to adafruit_
2021-04-11 17:45:37 -04:00
56be8306cd
try adding a submodule?
2021-04-10 23:22:13 -04:00
137745e911
neokey trinkey friend
2021-04-10 23:04:48 -04:00
ebfe36c9aa
Merge pull request #4576 from felixerdy/main
...
Add senseBox MCU
2021-04-09 10:27:37 -07:00
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
ca6dda4d2b
reorder alias
2021-04-09 08:35:13 +02:00
3aec1032f7
atmel-samd: switch to shared softencoder implementation
2021-04-08 16:32:36 -05:00
e5cffa94e8
add aliases for TX and RX
2021-04-08 21:19:27 +02:00
8544249fc0
boards/bdmicro_vina_d51: Replace old rev with new rev and rename.
...
This update to the PR retains the earlier board rev (with a rename) so
that backward binary compatibility is not lost for the earlier board
revision. The primary name 'vina-d51' is retained for the latest
revision to make it easy for customers to select the proper UF2
download - because the name matches the commercial name.
Details:
Replace bdmicro_vina_d51 with bdmicro_vina_d51_pcb7 (revision 7 of
PCB) with boardfiles unmodified. Add _pcb7 to the workflow build.
Replace bdmicro_vina_d51 boardfile content with latest PCB updates
(revision 10 ov PCB). Add minimal comments in the board files to make
it clear which PCB revision is implemented. Update the USB PID to
reflect an updated board revision.
2021-04-07 09:11:30 -04:00
3e558a89ac
boards/bdmicro_vina_d51: A few updates for flexibility and expansion.
...
ESP-01 header renamed to AUX, and expanded to 12 pins from 8
pins. Pins 1-8 still accommodate the ESP-01, with expansion to full
SERCOM 4-pad support to allow for SPI and I2C on that expansion port
with additional GPIO control.
Update pins.c with additional signals provided AUX_1-8, along with
UART, SPI, I2C name usage as aliases to appropriate AUX_1-8
signals. Additionally, add several alternate names specific to several
expansion modules - the ESP-01, and the ATW-01 using the WINC_1500
(SPI) w/interrupt and control needed for the WINC - with assignments
to module pin positions.
Re-work SERCOM assignments to accommodate the above from other parts
of the board, which required moving a SERCOM or two around in order to
accommodate the 4-pad sercom pin mapping on the AUX port.
Built and tested using latest from 'main':
Adafruit CircuitPython 6.2.0-rc.0-70-ga1562430f-dirty on 2021-04-05;
BDMICRO VINA-D51 with samd51n20
2021-04-05 10:44:52 -04:00
8b6ffba392
Update comment
2021-04-04 11:10:32 -05:00
53f3282e9c
change flash device
2021-04-02 14:42:38 -06:00
f8da94b8ba
removed o¡modules not availables
2021-04-02 14:40:27 -06:00
c1987b7311
init port hunter cat nfc!
2021-04-02 13:19:59 -06:00
be50732515
Fix SD_DET pin assignment of seeduino_wio_terminal.
2021-04-01 17:09:56 +09:00
8056af8648
[synthio] add a simple MidiTrack implementation
2021-03-26 16:38:10 -04:00
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
cde659651b
add brown out detect level
2021-03-23 19:17:45 +01:00
4b42932188
Merge pull request #4449 from ladyada/main
...
adventure together with rotary trinkey
2021-03-20 13:37:31 -04:00
8884682cac
adventure together with rotary trinkey
2021-03-20 12:03:51 -04:00
bfc8c89536
Merge pull request #4403 from jepler/bitmap-read-2
...
bitmaptools: Add readinto, arrayblit
2021-03-17 07:57:31 -05:00
94fa8e8a60
disable bitmaptools on small board
2021-03-16 19:04:21 -05:00
75ba26ee7c
Merge pull request #4421 from kattni/led-pin
...
Adding LED for D13/L pin name.
2021-03-16 18:58:14 -05:00
1be5ca7881
Merge pull request #4130 from gamblor21/rp_dp_parallel
...
Add RP2040 displayio.ParallelBus Support
2021-03-16 13:49:55 -05:00
58679dc038
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 12:21:50 -05:00
2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
d3bf1fe15d
modifications by pre-commit
2021-03-15 18:11:00 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
6c32a1f67f
update pins of senseBox MCU
2021-03-15 10:27:50 +01:00
b33d77bfe8
disable bitmaptools on over-full board
2021-03-14 20:08:09 -05:00
de93df6444
add senseBox MCU
2021-03-12 17:57:55 +01:00
7321411962
Added frequency to parallel display
2021-03-11 19:32:43 -06:00
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc
...
I2CPeripheral samd51 corrections in the CTRLC bit
2021-03-09 12:58:59 -08:00
be90fa80e8
Initial Changes
2021-03-09 10:48:33 -05:00
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
4f040af481
vm: Make the speed-size trade-off compile time settable
...
.. and enable for all samd21 boards
2021-03-05 18:29:27 -06:00
4cf6579e22
remove general changes; not consistent across builds
2021-03-05 10:10:50 -05:00
c97721455a
Shrink the smallest builds with compile options
2021-03-04 23:07:06 -05:00
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
0a58d451ad
Merge pull request #4306 from Neradoc/fix-reset-to-safe
...
press reset to safe mode on ports where reset reason is not implemented
2021-03-02 15:44:52 -05:00
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list
...
displayio: make Group use a python list internally
2021-03-02 09:59:58 -08:00
248acd07c8
shrink builds
2021-03-02 12:25:42 -05:00
cb2cf81136
ugame10 - disable pulseio to make more room for the French
2021-03-02 11:11:55 +01:00
54d11a8e2d
Merge pull request #4299 from jamesbowman/main
...
Add EVE support for Feather M4 Express
2021-03-01 22:56:50 -05:00
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
...
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
0dabd1ace2
Add EVE support for Feather M4 Express
2021-03-01 14:42:48 -08:00
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
7562b0cbb8
Turn off GC opt on catwan_usbstick
2021-02-26 12:00:01 -08:00
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
ec4cd68edc
More mpconfigboard.mk corrections for small builds
2021-02-25 17:48:50 -06:00
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
fb32e0a7fd
qtpy_m0_haxpress: Change config to make it fit.
2021-02-25 09:44:33 +01:00
a30d4ad25d
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-22 23:03:11 -05:00
8470f0fdb7
SAMD21: one endpoint pair for MSC now instead of two
2021-02-21 12:37:59 -05:00
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
9e626fdd5c
new cp sapling board
2021-02-14 20:00:32 -05:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
f6603aa566
Merge pull request #4168 from BHDynamics/main
...
Add DynaLoRa-USB Dongle
2021-02-10 11:03:16 -08:00
983c75fb24
Add more pin names
2021-02-10 12:19:50 +01:00
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
e3275be8b1
Merge pull request #3911 from hugodahl/add-translation-for-builtin-object-help
...
Update built-in help output for localization (Issue #3907 )
2021-01-22 03:49:19 -05:00
63b5e56c72
shrink feather_m0_adalogger and gemma_m0
2021-01-21 23:49:49 -05:00
ea9fe24971
shrink arduino_mkrzero build
2021-01-21 18:02:35 -05:00
9b8246f889
shrink sparkfun_samd21_dev de_DE build
2021-01-21 15:56:30 -05:00
dea2bcd8f0
Fixed comment in mpconfigboard.h
2021-01-17 21:20:27 -07:00
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
c44c99398d
Merge pull request #3983 from dhalbert/6.1.0-shrink-builds
...
shrink some de_DE builds
2021-01-12 20:19:43 -06:00
8d24e72981
Merge pull request #3978 from ladyada/neotrinkey
...
samd21 board with only 4 neopixels + two touchpads
2021-01-12 20:19:01 -06:00
4b30412871
shrink some de_DE builds
2021-01-12 18:23:37 -05:00
4be5e914ac
Merge pull request #3966 from dhalbert/samd-dac-channels
...
fix atmel-samd DAC channel selection logic
2021-01-12 13:01:50 -05:00
748d44892d
fix some precommit complaints
2021-01-12 12:55:02 -05:00
f7f97ae1b7
samd21 board with only 4 neopixels + two touchpads
2021-01-12 12:50:08 -05:00
452d66dd0e
Update ports/atmel-samd/common-hal/analogio/AnalogOut.c
...
whoops, yes!
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-11 19:12:52 -05:00
10093d37c5
Merge pull request #3960 from dhalbert/pwmout-tcc-resolution
...
Look up TCC resolution as necessary
2021-01-11 15:33:59 -08:00
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
316bd0c72d
fix atmel-samd DAC channel selection logic
2021-01-10 19:22:15 -05:00
908e02439d
Look up TCC resolution as necessary
2021-01-09 15:04:23 -05:00
Scott Shawcroft
Scott Shawcroft
Chris Wilson
microDev
Dan Halbert
Nathan Young
Brian Dean
Jeff Epler
Dan Halbert
Kattni
lady ada
BoB LeSuer
Radomir Dopieralski
Tsutomu IKEGAMI
Jeff Epler
root
George White
EmergReanimator
Ben Bleything
Artyom Skrobov
Jeff Epler
Mark
Seth Kerr
ajs256
anecdata
felixerdy
sabas1080
gamblor21
jposada202020
James Bowman
Kevin Matocha
Kamil Tomaszewski
Enrique Casado
BiffoBear
Patrick Van Oosterwijck
David Glaude
mrangen