d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
1683eb913d
Minor tweaks based on feedback
2018-09-06 14:49:49 -07:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
121903b6ee
Tweaks based on feedback
2018-08-31 14:21:48 -07:00
6697544cdf
Introduce displayio to render graphics to displays.
...
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.
This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
2018-08-31 12:31:52 -07:00
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff.
2018-08-20 18:04:35 -07:00
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-20 10:52:33 -07:00
1768057e87
add HalloWing
2018-08-20 10:52:24 -07:00
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
680597547c
add HalloWing
2018-07-29 19:22:16 -04:00
bf9981e8db
bring all frozen libraries up to date
2018-07-03 14:39:21 -04:00
1f3de5174e
Freeze Adafruit_CircuitPython_Crickit into crickit builds
2018-06-26 19:49:55 -04:00
de4cd1ee73
add pins D3/D4 to pins.c
...
fixes #948
2018-06-20 22:26:59 -04:00
769788d3c7
Turn off USB pin objects since they are always used for USB.
2018-06-08 12:56:32 -07:00
ba7e0e2f86
Add Adafruit to other M4 board name strings
2018-06-07 13:39:04 -04:00
7b2875d54a
Add Adafruit to board name string
2018-06-07 13:33:13 -04:00
0ab2a60dcd
Update ItsyBitsy board name to one word
2018-06-07 13:12:44 -04:00
9ba6990228
Feather M0 Express build with Crickit libraries
2018-06-05 18:21:47 -04:00
7e7e33e460
add PA14 as D4 to Feather M4 Exprses
2018-06-05 08:15:34 -04:00
fd71e56891
atmel-samd: Re-org helper peripheral files into their own subdirectory.
...
Ideally in the future they won't depend on ASF4 or MicroPython.
2018-06-01 15:07:31 -07:00
e158702a68
atmel-samd/samd51: Use crystal for RTC
...
This uses the crystal to clock the RTC on boards which have a crystal.
Disable clock generator 2 which was enabled in commit
8e2080411f
2018-06-01 18:03:23 +02:00
eab8e43188
rev E feather M4 express; remove named AREF pins
2018-05-29 20:25:28 -04:00
b9f36184f5
refine pirkey build
2018-05-24 13:28:03 -04:00
083f91363a
pirkey APA102 defs were commented out in mpconfigboard.h
2018-05-23 18:21:07 -04:00
22405d6bdb
Merge pull request #860 from dhalbert/3.0-cpx-crickit
...
turn off longint on cpx crickit; update frozen libs
2018-05-22 16:28:42 -04:00
165b28438a
Merge pull request #854 from python-ugame/extra-override
...
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
2018-05-22 10:22:35 -07:00
0d7db29630
turn off longint on cpx crickit; update frozen libs
2018-05-22 13:03:13 -04:00
45db48bbaa
make longint choice mechanism more readable
2018-05-22 08:04:14 -04:00
5680933483
refactor longint settings; make crickit cpx build
2018-05-21 23:58:03 -04:00
6a6ab2b0ec
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
...
Some boards (like the uGame10) may want to have their own set of extra
modules. This change lets them override EXTRA_BUILTIN_MODULES in their
mpconfigboard.h and makes the ugame10 board do that.
2018-05-21 09:23:58 +02:00
cf33ad9a54
atmel-samd/samd21: Enable long int on Express boards
...
This is necessary for using 1970 epoch in the time module.
2018-05-18 12:35:26 +02:00
06b293af29
pirkey, trinket, ugame
2018-05-17 13:56:10 -04:00
a84845c0ae
itsbitsy, metro
2018-05-17 13:48:33 -04:00
173a0a5faa
arduino, circuitplayground, feather boards
2018-05-17 13:42:08 -04:00
e1cccd3dac
rename to UART
2018-05-17 13:21:15 -04:00
2210fc60b1
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-default-serial
2018-05-17 13:08:43 -04:00
c846f4bdae
remove newline
2018-05-17 12:17:06 -04:00
4fd4adf974
not working
2018-05-17 12:14:51 -04:00
30c625ff46
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 17:58:03 -04:00
0511becd55
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-i2c-gemma
2018-05-16 17:55:43 -04:00
b9b742cc69
add spi def to all boards pins file
2018-05-16 17:43:14 -04:00
c2fa892a02
fix formatting
2018-05-16 17:38:44 -04:00
cc52f8efd9
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 17:32:50 -04:00
e8e75c056a
For the two boards without SCL and SDA can you still add the board global entry for I2C? That way they'll raise the NotImplementedError with the better message instead of a NameError.
2018-05-16 17:02:41 -04:00
de885e81b1
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 16:07:55 -04:00
8a351595ef
formatting, trailing newlines
2018-05-16 15:57:25 -04:00
2c067edf54
used pins.c instead of README.rst
2018-05-16 15:54:01 -04:00
3144654854
SPI for all boards
2018-05-16 15:36:36 -04:00
244866c2c3
spi on much
2018-05-16 15:25:24 -04:00
10888be8e8
fixed pins
2018-05-16 15:07:12 -04:00
8d1d821876
pin issue
2018-05-16 14:58:57 -04:00
ff6e6b5155
best effort
2018-05-15 15:33:27 -04:00
4e65752d6e
feather m0 boards
2018-05-15 15:28:23 -04:00
cd1f6627e4
formatting
2018-05-15 14:09:00 -04:00
bd7f603748
zero + feather logger
2018-05-15 14:06:01 -04:00
7d443c87b3
Add gemma_m0 pin exclusions
2018-05-15 14:03:39 -04:00
a10f04ad6e
support for 2
2018-05-15 13:53:53 -04:00
b0bacd9b0b
review code
2018-05-15 13:15:24 -04:00
3fd9900ea7
disable pins on trinket_m0 so that we can free a fair bit of flash - Issue #840
2018-05-15 13:13:59 -04:00
d3a5d40374
Merge pull request #785 from notro/rtc_calibration
...
atmel-samd/samd21: Rework clock setup + calibration
2018-05-08 10:55:51 -07:00
2893e795fc
atmel-samd/samd21: Use XOSC32K on boards with a crystal
...
Use XOSC32K on boards that have BOARD_HAS_CRYSTAL defined and set to 1.
2018-05-05 18:45:15 +02:00
32363b801b
3.0: add CircuitPlayground and HID to CPX frozen modules
2018-05-04 08:44:33 -04:00
898a7d92e3
atmel-samd: Fix M4 RTC and ItsyBitsy M4 definition
2018-04-19 14:42:03 -04:00
812fe0c93f
Turn on nvm in 3.0.
...
Its 256b on M0 and 8k on M4 to match flash erase sizes.
Fixes #758
2018-04-13 16:22:28 -07:00
28642ab10d
Add audio output support!
...
This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.
Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.
Fixes #652 . Fixes #522 . Huge progress on #263
2018-04-12 16:35:13 -07:00
2a26dac2bc
Add initial ItsyBitsy M4 support
2018-04-12 11:16:52 -07:00
5eb9f9d060
atmel-samd: Fix rebooting to bootloader
...
Commit efbf08266badafruit/circuitpython@efbf08266b . However, I only tested on
trinket_m0.
Closes : #739
2018-04-03 21:40:10 -05:00
63d826a52a
Update USB PID
2018-03-23 09:34:02 -07:00
fd7dcff4e9
Add Feather M4 Express support.
...
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
2018-03-23 00:00:13 -07:00
3bf4d69f67
Update Metro M4 to rev F and make flash reset on start.
2018-03-22 16:42:47 -07:00
05e2a7d1ac
Added digital pin assignments
2018-03-15 20:28:09 -04:00
04b4026666
fix dotstar for Gemma_M0 in CP3.0
...
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access. same issue as #514 for trinket_m0
2018-03-14 21:28:56 -04:00
e7fc0b6aa7
Use DMA for long SPI transactions including those to the SPI Flash.
...
QSPI is not currently working so its commented out.
This is progress on #652 .
2018-03-09 12:45:46 -08:00
942b7ffbe0
fixes hardware dotstar support for 3.0 and addresses issue #514
2018-03-08 20:39:47 -08:00
01aceaae50
Support all boards and remove erase and page sizes because they never change.
2018-03-01 12:45:12 -08:00
2ab923862b
Structify flash device definitions.
2018-02-28 19:15:54 -08:00
bf05183158
Merge remote-tracking branch 'adafruit/2.x' into merge_2x
2018-02-27 15:24:16 -08:00
cc7acfd491
consistently brand Itsy Bitsy M0 as 'Express'
2018-02-26 17:37:03 -05:00
957a82b592
add board.RX and .TX pins to metro_m4_express_revb
2018-02-23 09:54:39 -05:00
9b4477e1dc
Implement UART for 3.0 + related fixes.
...
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.
2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
a. async USART driver
b. bringing Atmel START configuration closer to what we use
c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
2018-02-21 17:18:49 -05:00
d02251f8cd
Add a new board for Metro M4 Express Rev B. This is the board
...
send to community members for testing.
Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
2018-02-20 12:34:07 -08:00
15f626be58
m4 qspi works. m0 compiles
2018-02-19 14:02:04 -08:00
f20d5723aa
Reorganize things. Reading jdec works.
2018-02-19 14:02:04 -08:00
4710a2adba
Compiles for m4. Untested on m0.
...
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
2018-02-19 14:02:04 -08:00
a2bd772d5c
Begin rework to add qspi support.
2018-02-19 14:02:04 -08:00
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
d595a03bbd
Update ugame port for the final ugame10 version
...
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
2018-01-29 22:19:09 +01:00
efbf08266b
make _estack be double-word aligned
2018-01-24 19:24:36 -05:00
ab1f133667
issue #536 CPX change SPI pin designations to externally available pins ( #540 )
...
* issue #536 CPX
* switched pin assignment
2018-01-22 19:31:55 -08:00
4bd1d09d74
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x ( #539 )
2018-01-19 11:53:47 -08:00
d0cc8abd31
revise boards/ files for 3.0. All now compiled (but I don't have all to test).
2018-01-04 14:16:53 -05:00
d8686cc002
use correct LD_FILE in mpconfigboard.mk for boards with external flash
2018-01-03 16:49:38 -05:00
065e82015f
merge from 2.2.0 + fix up board defs
2018-01-02 21:25:41 -05:00
72c911be97
Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now.
2017-11-27 21:00:24 -05:00
5eb7958425
ports/atmel-samd/boards/feather_m0_adalogger/pins: Added missing pins
...
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
2017-11-25 22:00:32 -08:00
e0eae5cb2a
Enable the Neopixel status light on Metro M0 Express and Feather M0 Express boards
2017-11-21 14:39:56 -08:00
312444bbd2
non-DMA SPI working; adding this now for testing; will continue with DMA
...
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5
Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
2017-11-16 19:09:35 -05:00
3cb5e7ea58
atmel-samd: Update Feather M0 Express USB PID
...
This makes it different from the bootloaders and Arduino.
2017-11-07 14:26:37 -08:00
7292984204
Implement busio.I2c.
...
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.
simpler reset of SERCOMs; remove unused routine
2017-11-07 09:59:54 -08:00
f4c8256345
atmel-samd: Add TX/RX led support for Metro M4.
2017-10-31 22:39:16 -07:00
3177e10e9e
atmel-samd: Add samd21 neopixel support.
...
Also, fix and enable the status neopixel.
Fixes #264
2017-10-31 22:38:09 -07:00
d023879bea
atmel-samd: Update and enable neopixel_write for ASF4, tested on SAMD21 only.
2017-10-31 16:06:36 -07:00
4aeef100f6
atmel-samd: More USB polish
...
* Introduce a python script to generate the USB descriptor instead of
a bunch of C macros. In the future, we can use this dynamically in
CircuitPython.
* Add support for detecting read-only mass storage mounts.
Fixes #377
2017-10-30 18:29:20 -07:00
73c15dcf8b
Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge
...
This is prep for merging in the NRF5 pull request.
2017-10-24 22:31:16 -07:00
Scott Shawcroft
ShawnHymel
sabas1080
Benjamin Shockley
Dan Halbert
ATMakersBill
Bryan Siepert
Nick Moore
Paul Sajna
Pierrick C
ladyada
Noralf Trønnes
jerryneedell
Scott Shawcroft
Kattni Rembor
Radomir Dopieralski
Matt Land
Roy Hooper
Jeff Epler
brentrubell
Tony DiCola
Stewart Colborne
mrmcwethy