djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
29,477 Commits 21 Branches 274 Tags 785 MiB
1fe7d2956c
Commit Graph

9329 Commits

Author SHA1 Message Date
Dan Halbert
3abfd212ec nrf: return None when UART.read() reads nothing 2022-09-15 19:40:02 -04:00
Dan Halbert
60f43b1703 allow preserving pin state during deep sleep 2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf Add BananaPi BPI-Leaf-S3. 
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
 2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset 
Espressif pwmout reset fixes
 2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR 
Add BananaPi BPI-Bit-S2 .
 2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed Add BananaPi BPI-Bit-S2 . 
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
 2022-09-14 10:21:23 +08:00
Dan Halbert
d2f28eb980
Merge pull request #6887 from RetiredWizard/Broadcom-UART 
Enable CIRCUITPY_CONSOLE_UART by default on Broadcom boards
 2022-09-13 14:35:16 -04:00
Dan Halbert
2b25a5d574 update esp32-camera 2022-09-13 13:16:37 -04:00
Dan Halbert
14adfb16dd avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets 2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2 fix logic in pwmout_reset() 2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39 Cast pin_number to int8_t so that it can be used with switch-case. 2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9 Removed whitespaces. 2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200 Set the default pin state for GPIOs to pull down. 2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3 2022-09-11 13:31:38 +05:30
RetiredWizard
14b604f48c
Add LED pin definition to Zero 2W board 2022-09-10 23:18:25 -04:00
RetiredWizard
28756936d5
Add HW_LED_STATUS pin to Zero 2W board 2022-09-10 23:17:02 -04:00
RetiredWizard
38a0ca324e
Uses different pins for RX/TX 2022-09-10 21:48:10 -04:00
RetiredWizard
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:42:41 -04:00
RetiredWizard
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:40:31 -04:00
RetiredWizard
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:39:51 -04:00
RetiredWizard
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:39:03 -04:00
RetiredWizard
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:38:16 -04:00
RetiredWizard
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:37:31 -04:00
RetiredWizard
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:36:41 -04:00
RetiredWizard
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:36:01 -04:00
RetiredWizard
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:34:45 -04:00
RetiredWizard
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:33:29 -04:00
microDev
8cd4b9fc04 fix espressif run modes 2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2 Changed the pins assignment. 2022-09-09 16:50:14 +08:00
Lee Atkinson
f279a2dbb2
Merge branch 'adafruit:main' into adcdma 2022-09-08 11:46:01 -04:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control 
Allow enabling and disabling of status bar
 2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs 
Use MP_WEAK for default board.c routines
 2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5 Use MP_WEAK for default board.c routines 2022-09-08 07:36:50 -04:00
latkinso42
c1f57c6ceb Pushing for resolution 2022-09-07 18:53:35 -04:00
Dan Halbert
328138225b
Merge pull request #6868 from PontusO/main 
Added challenger_rp2040_wifi_ble board
 2022-09-07 18:36:52 -04:00
Seon Rozenblum
6c4f352533 Fixed incorrect IO naming for ProS3 and FeatherS3 2022-09-07 19:51:45 +10:00
latkinso42
25078a24a3 Attempt to fix Build-Docs and Pre-Commit 2022-09-06 18:58:57 -04:00
Pontus Oldberg
c043c437f7 Merge branch 'main' of https://github.com/PontusO/circuitpython 2022-09-06 09:37:25 +02:00
Pontus Oldberg
9a937e6ea3 Added challenger_rp2040_wifi_ble board. 2022-09-06 09:37:21 +02:00
latkinso42
5498b3ac91 fix to analogbufio BufferedIn.h 2022-09-05 14:22:08 -04:00
Scott Shawcroft
a09836eb4a
Merge pull request #6681 from PontusO/main 
Adds support for the Challenger RP2040 SubGHz board
 2022-09-05 10:01:51 -07:00
latkinso42
a1856ea3e9 Renaming module from adcbuffer to analogbufio 2022-09-05 12:11:49 -04:00
latkinso42
478b40ecf9 Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma 
Syncing with remote
 2022-09-04 16:07:37 -04:00
Lee Atkinson
3cd8259a78
Merge branch 'adafruit:main' into adcdma 2022-09-04 15:59:20 -04:00
latkinso42
d7a1db5b87 Changes per review 2022-09-04 15:57:59 -04:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython 
Add LOLIN S3 ESP32-S3 board.
 2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede removal of sda-scl and add "GP" to 40,41 2022-09-04 18:05:50 +03:00
bill88t
e1891038c8 Forgor the one IO pin and sda-scl 2022-09-04 16:59:56 +03:00
Dan Halbert
449b43e5a6
Merge pull request #6863 from jepler/rp2pio-erroneous-mask 
rp2pio: fix occasional bug when not using OUT pins
 2022-09-04 09:15:35 -04:00
Jeff Epler
a3e17189a4
rp2pio: fix occasional bug when not using OUT pins 
a NULL first pin object is used to indicate that there are zero
of some kind of pin associated with the StateMachine. However,
mask_and_rotate wasn't checking for zero. It actually read data from
near address 0x0 and (in my case) got a nonzero mask, which then
caused a program with GPIO11 and GPIO12 as input with pull-up and no
out pins to erroneously encounter the error "pull masks conflict with
direction masks"
 2022-09-03 20:39:42 -05:00
wemos
3a18d285a2 Add LOLIN S3 ESP32-S3 board. 2022-09-03 11:06:51 +08:00
latkinso42
6fe2ea4513 Merging back with updated main files 2022-09-02 15:51:45 -04:00
Pontus Oldberg
59fb3fbbd6
Merge branch 'adafruit:main' into main 2022-09-01 10:35:13 +02:00
Dan Halbert
52080e24eb status bar control 2022-08-30 15:23:44 -04:00
Dan Halbert
3ba385ff5c
Merge pull request #6794 from jepler/esp32-camera-error-checking 
Esp32 camera error checking
 2022-08-30 11:41:42 -04:00
Dan Halbert
371e544a92
Merge pull request #6823 from pypewpew/ugame10-fix 
Fix ugame.py for the ugame10 board
 2022-08-29 12:34:02 -04:00
Jeff Epler
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c 
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
 2022-08-28 16:46:50 -05:00
Lee Atkinson
04af01a672 Pin Validation fixed/readmultiple return fixed 2022-08-27 14:47:12 -04:00
Radomir Dopieralski
0a0c03c3d2 Fix ugame.py for the ugame10 board 
It was still trying to use the gamepad module, and there was a typo
 2022-08-26 17:07:44 +02:00
Jeff Epler
ebd58155f2 bump pico-sdk to 1.4.0 2022-08-26 09:54:16 -05:00
Jeff Epler
dc27fb967d error at runtime if no psram actually reserved 2022-08-26 09:27:50 -05:00
Jeff Epler
9f22e75e5e error if camera is configured but no psram 2022-08-26 09:27:50 -05:00
Jeff Epler
8ed6a6135a Disable camera on boards without psram 2022-08-26 09:27:50 -05:00
Dan Halbert
83838fc4fd
Merge pull request #6798 from DavePutz/issue_6735 
Fix handling of zero-length pulseout pulse
 2022-08-25 07:49:28 -04:00
Lee Atkinson
37b6079c05 Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma 
Reconciling remote updates
 2022-08-24 21:46:28 -04:00
Lee Atkinson
55c0404d85
Merge branch 'adafruit:main' into adcdma 2022-08-24 21:07:12 -04:00
Lee Atkinson
6fd08483e2 Tidying code for PR/ Minor Issues 2022-08-24 17:41:51 -04:00
DavePutz
c00a630f50
Update PulseOut.c 
reorder the tests for zero-length
 2022-08-23 15:58:27 -05:00
root
3daebb36c3 Fix handling of zero-length pulseout pulse 2022-08-23 15:17:54 -05:00
Jeff Epler
6572f85913
Merge pull request #6779 from dhalbert/matrixportal-more-ram 
matrixportal: remove ulab to make room to freeze portalbase
 2022-08-23 09:41:36 -06:00
Lee Atkinson
e23b621d69 Fixing 8 bit and 12 bit conversion 2022-08-22 18:55:55 -04:00
Lee Atkinson
f5655dd48c Fixing Build errors/ DMA Xfer Rate 2022-08-21 11:44:40 -04:00
Lee Atkinson
68671399d1 More formating 2022-08-19 10:51:13 -04:00
Lee Atkinson
d3c3c9eac4 Tidy a few things 2022-08-18 19:10:16 -04:00
Lee Atkinson
f91af513b7 Introduced odule adcbuffer / removed analogio/AnalogFastIn 2022-08-18 16:23:17 -04:00
Dan Halbert
0c87d0b40d matrixportal: remove ulab instead of bleio HCI 2022-08-18 10:23:37 -04:00
Lee Atkinson
34b8fbaf14
Merge branch 'adafruit:main' into adcdma 2022-08-18 09:08:10 -04:00
Dan Halbert
2664d3766d matrixportal: remove BLEIO HCI to make room to freeze portalbase 2022-08-18 07:43:31 -04:00
arturo182
23f2b62196 Add the Solder Party BBQ20KBD board 2022-08-17 20:44:23 +02:00
Scott Shawcroft
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix 
Fix ESP32 touch; rework common code a bit
 2022-08-17 10:24:22 -07:00
Dan Halbert
2bc8d73776 Fix ESP32 touch; rework common code a bit 2022-08-16 20:04:27 -04:00
Scott Shawcroft
4b1d1fd72d
Merge pull request #6768 from mayrhomar/main 
Add Waveshare ESP32-S2-Pico-LCD
 2022-08-16 09:50:46 -07:00
Scott Shawcroft
3fbddfde59
Merge pull request #6758 from gamblor21/rp2040_i2ctarget 
Rp2040 i2ctarget support
 2022-08-15 13:57:49 -07:00
Martin
528da05f54 Add Waveshare ESP32-S2-Pico-LCD 2022-08-15 16:46:14 +02:00
Lee Atkinson
4542c801b0 Tidying up loose endson draft PR 2022-08-14 13:03:33 -04:00
lady ada
2f2ccdddbf pycam rev b pins 2022-08-13 23:41:35 -04:00
gamblor21
7584363f66 Forgot an include 2022-08-13 17:41:45 -05:00
gamblor21
1ae2a2154e Initial i2ctaret commit 2022-08-13 17:00:43 -05:00
MicroDev
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset 
Audit all boards with LED pins defined
 2022-08-13 15:25:02 +05:30
Lee Atkinson
8cd12b2478 Copyright Change 2022-08-12 16:01:58 -04:00
Lee Atkinson
81c7ba899d Copyright Update/Acknowledgements 2022-08-12 13:57:45 -04:00
Lee Atkinson
6d8e8c71fc Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma 
Fixing code behind commits
 2022-08-11 17:58:46 -04:00
Lee Atkinson
ce24469848
Merge branch 'adafruit:main' into adcdma 2022-08-11 17:57:01 -04:00
Lee Atkinson
c3c1e307c4 Sample Rate Enhancements 2022-08-11 17:50:30 -04:00
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined 
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)

Fixes #6717
 2022-08-11 14:41:20 -07:00
Scott Shawcroft
5823bcc744
Merge branch 'main' into c3_short_send 2022-08-11 12:45:02 -07:00
Scott Shawcroft
f1053fb963
Introduce port_yield() 
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
 2022-08-11 11:25:34 -07:00
Lee Atkinson
5fb5fd0558
Merge branch 'adafruit:main' into adcdma 2022-08-10 18:33:52 -04:00
Scott Shawcroft
f9d724c09e
Fix retries after successful connection. 
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)

Also, remove extra code from websocket that is leftover from
debugging.
 2022-08-10 15:24:08 -07:00
Jeff Epler
c2a45c1f27
Merge pull request #6739 from jepler/qrio-esp32camera 
Enable qrio to work with rgb565 data, including byte-swapped data
 2022-08-10 13:54:40 -05:00
Scott Shawcroft
7a5d2e81fc
Merge pull request #6734 from dhalbert/remove-autobrightness 
Remove support for auto-brightness
 2022-08-10 10:22:53 -07:00
Jeff Epler
86f9d98a5d fix documentation of framebuffer_count 2022-08-10 11:12:54 -05:00
Dan Halbert
af64faae1e switch back one I2C message 2022-08-10 12:06:43 -04:00
Lee Atkinson
e778112710
Merge branch 'adafruit:main' into adcdma 2022-08-10 10:29:17 -04:00
Lee Atkinson
9e0c580d3d AnalogFastIn 2022-08-10 09:42:24 -04:00
Dan Halbert
198c8fea11 merge from upstream and fix espressif_esp32s3_eye 2022-08-10 08:43:08 -04:00
Dan Halbert
02cc6c2aee Merge remote-tracking branch 'adafruit/main' into remove-autobrightness 2022-08-10 08:35:53 -04:00
Scott Shawcroft
138c92f035
Merge pull request #6727 from dhalbert/restore-deleted-modules 
restore rainbowio and onewireio to a number of boards
 2022-08-09 21:44:26 -07:00
Dan Halbert
41bcd7b260 Remove support for auto-brightness 2022-08-09 22:40:21 -04:00
Scott Shawcroft
59b4353282
Merge pull request #6713 from tannewt/exception_filename 
Add exception filename to title bar
 2022-08-09 16:59:12 -07:00
Jeff Epler
5040e1b7a5
Merge pull request #6684 from jepler/espressif-camera-2 
Rewrite camera support for the Espressif port
 2022-08-09 18:50:25 -05:00
Scott Shawcroft
db837e2b48
Merge pull request #6725 from dhalbert/esp-stack-size-16kB 
increase main task stack size from 8kB to 16kB
 2022-08-09 16:40:16 -07:00
Scott Shawcroft
554063a817
Merge branch 'main' into espressif-camera-2 2022-08-09 14:07:14 -07:00
Scott Shawcroft
5084de1b73
Merge pull request #6708 from strid3r21/main 
Added Smart Bee Design Boards
 2022-08-09 14:06:11 -07:00
Dan Halbert
c4db71d12e
Merge pull request #6721 from dhalbert/i2c-target 
Change I2C terminology from "peripheral" to "target"
 2022-08-09 16:12:17 -04:00
Dan Halbert
34b22eac2a restore rainbowio and onewireio to a number of boards 2022-08-09 16:10:17 -04:00
Dan Halbert
4021b44a39 increase main task stack size from 8kB to 16kB 2022-08-09 15:00:01 -04:00
Scott Shawcroft
df52d995ed
Merge pull request #6714 from dannystaple/patch-2 
Improve docs for rp2Pio Statemachine frequency
 2022-08-09 10:50:27 -07:00
Scott Shawcroft
b3b27a1d80
Remove extra leading spaces 2022-08-09 10:45:47 -07:00
Scott Shawcroft
556d01a685
Remove extra newline at end of file 2022-08-09 10:44:57 -07:00
Scott Shawcroft
ce1273be7a
Pull Feather S2 TFT LED down on reset 2022-08-09 10:42:56 -07:00
Jeff Epler
c74746f052 Cross references in documentation always help 2022-08-09 12:20:02 -05:00
Dan Halbert
84807cd6eb Change I2C terminology from "peripheral" to "target" 2022-08-09 13:13:19 -04:00
Scott Shawcroft
d95cfc3abc
Merge pull request #6719 from dhalbert/huzzah32-web-workflow 
enable web workflow on Feather HUZZAH32
 2022-08-09 10:08:39 -07:00
Jeff Epler
5a85b8ab95 improve docstrings based on my best sleuthing 2022-08-09 11:42:19 -05:00
Jeff Epler
ec839d6f90 these items should not have been disabled 2022-08-09 11:42:19 -05:00
Jeff Epler
f87e34b9ed add shutter button 2022-08-09 11:42:19 -05:00
takayoshiotake
5ce3778d75 Add custom board: Octave RP2040 2022-08-09 22:19:38 +09:00
Dan Halbert
10275001ac enable web workflow on Feather HUZZAH32 2022-08-09 07:26:18 -04:00
paul
15ad24ba62 ran pre-commit. 2022-08-09 04:32:21 -04:00
Danny Staple
3c1c477c5b
Improve docs for rp2Pio Statemachine frequency 
This frequency can be set to 0 for the system (133mhz) clock speed.
 2022-08-08 22:14:55 +01:00
lady ada
2cd9222e5e add includes 2022-08-07 14:32:29 -04:00
lady ada
029b6b6fbe add default display 2022-08-07 14:12:40 -04:00
paul
a6eadd6259 Added Bee Motion S3 board 2022-08-07 11:59:43 -04:00
paul
f39058edc4 Added Bee S3 board 2022-08-06 22:22:20 -04:00
Lee Atkinson
f69939c49c First Commit for AnalogFastIn 2022-08-06 16:22:50 -04:00
Lee Atkinson
56c44f6265 Merge remote-tracking branch 'origin/main' 2022-08-06 15:53:54 -04:00
Lee Atkinson
552f6af4a1 clean up 2022-08-06 15:50:22 -04:00
Jeff Epler
1a11ff864a
Merge remote-tracking branch 'origin/main' into espressif-camera-2 2022-08-05 21:08:12 -05:00
Jeff Epler
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2 2022-08-05 16:38:51 -05:00
Scott Shawcroft
207311b02a
Merge branch 'main' into title_execution_status 2022-08-05 13:42:58 -07:00
Dan Halbert
8c10e09ba0
Merge pull request #6667 from jepler/esp-reserve-heap-for-idf 
Add ability to reserve psram
 2022-08-05 15:06:44 -04:00
Jeff Epler
3f49d77036
Improve esp32-s3-eye board definition 2022-08-05 13:10:21 -05:00
Scott Shawcroft
e7d72b1ebe
Use libgcc from Arch on SAMD21 (it's smaller.) 
Fixes #4705
 2022-08-04 16:33:41 -07:00
Scott Shawcroft
83cbbc9946
Add BLE status to title bar 2022-08-04 16:33:10 -07:00
Scott Shawcroft
125b276af0
Get CIRCUITPY FATFS directly. 
Otherwise, you may actually get a non-root filesystem.

Fixes #6575
 2022-08-04 16:06:27 -07:00
Jeff Epler
861fa9625d
Add the ESP32-EYE aka ESP-EYE 2022-08-04 15:12:12 -05:00
Jeff Epler
98202c8568
Allow changing camera settings that require reinit 
These can only be changed in a group, though any items to keep
unchanged can be unspecified or specified as None.
 2022-08-04 15:12:11 -05:00
Jeff Epler
428fbcd343
remove debug message during build 2022-08-04 15:12:10 -05:00
Jeff Epler
0e26a937cc
Disable camera everywhere it doesn't fit 2022-08-04 15:12:08 -05:00
Jeff Epler
230532f0eb
one last doc build fix 2022-08-04 15:12:07 -05:00
Jeff Epler
a9d53ad2a6
Fix "check-stubs" problems 2022-08-04 15:12:06 -05:00
Jeff Epler
7cb40c9054
further doc build fixes 2022-08-04 15:12:05 -05:00
Jeff Epler
81fb9a5f20
specify return type for docs 2022-08-04 15:12:04 -05:00
Jeff Epler
8bdbe0355a
Add more getters 2022-08-04 15:12:02 -05:00
Jeff Epler
badcae5ace
Fix docstring errors 2022-08-04 15:12:01 -05:00
Jeff Epler
aead0dfe45
Return a Bitmap from take() when appropriate 2022-08-04 15:12:00 -05:00
Jeff Epler
54fe753602
Enable gifio and qrio when appropriate 2022-08-04 15:11:59 -05:00
Jeff Epler
258f72640a
Implement a pile of getters & setters 2022-08-04 15:11:57 -05:00
Jeff Epler
69949ecb43
update PID for this board 2022-08-04 15:11:56 -05:00
Jeff Epler
d1b89fca91
Reset camera when interpreter is reset 2022-08-04 15:11:55 -05:00
Jeff Epler
f54c7adddc
Must treat NO_PIN cast to uint8_t the same as NO_PIN 
Otherwise, deinitializing a camera with e.g., the powerdown
pin unspecified results in an assertion failure in a debug build.
 2022-08-04 15:11:54 -05:00
Jeff Epler
1d1e139379
fix taking multiple pictures 2022-08-04 15:11:53 -05:00
Jeff Epler
b903a020fd
Enable display on esp32-s3-eye 2022-08-04 15:11:52 -05:00
Jeff Epler
8d673bdbf5
reserve 1MB of PSRAM for camera framebuffer on esp32s3-eye 
.. this setting can be overridden with a bigger or smaller value in
CIRCUITPY/.env but 1/8 of PSRAM seems like a good initial value. It's
enough to store a single 800x600 or 640x480 RGB565 frame, or multiple
smaller frames such as 320x240.
 2022-08-04 15:11:51 -05:00
Jeff Epler
5db6db0128
add esp32-camera 
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.

This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.

This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.

First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.

Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:

```python
import board
import esp32_camera

c = esp32_camera.Camera(
    data_pins=board.CAMERA_DATA,
    external_clock_pin=board.CAMERA_XCLK,
    pixel_clock_pin=board.CAMERA_PCLK,
    vsync_pin=board.CAMERA_VSYNC,
    href_pin=board.CAMERA_HREF,
    pixel_format=esp32_camera.PixelFormat.JPEG,
    i2c=board.I2C(),
    external_clock_frequency=20_000_000)

m = c.take()
if m is not None:
    print(bytes(m))
```

Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
 2022-08-04 15:11:50 -05:00
Jeff Epler
8e08cc38f8
Add default I2C bus to Kaluga 2022-08-04 15:11:48 -05:00
Scott Shawcroft
e0cb8ef17e
Merge pull request #6694 from dhalbert/esp32-no-psram 
ESP32 no psram support; other ESP32 cleanup
 2022-08-04 11:49:39 -07:00
Scott Shawcroft
3707b54e3b
Merge pull request #6672 from bill88t/main 
Add Waveshare ESP32-S2-Pico
 2022-08-04 11:09:59 -07:00
Dan Halbert
202fac59f8 ESP32 fixes for no PSRAM; some cleanup 2022-08-04 13:44:52 -04:00
Dan Halbert
d4e8c19b49 merge from main 2022-08-04 12:43:23 -04:00
Jeff Epler
82be75adb5 Add ability to reserve psram 
.. the primary user of which will be the camera, since the framebuffers
must be allocated via esp-idf allocation function and never from the
gc heap.

A board can have a default value, and the value can also be set in the
/.env file using the key CIRCUITPY_RESERVED_PSRAM with the value being
the reserved size in bytes.

Co-authored-by: Dan Halbert <halbert@adafruit.com>
 2022-08-03 16:19:40 -05:00
Pontus Oldberg
c884194c92 Fixed incorrect PID. 2022-08-03 08:45:39 +02:00
bill88t
68bb6b9988 ran precommit 2022-08-03 09:14:26 +03:00
Bill Sideris
efa3e40f90
Add the one obtained from esp 2022-08-03 08:48:28 +03:00
Dan Halbert
d3d5e36548 update adafruit/esp-idf for ESP32_ECO3_CACHE_LOCK_FIX fix 2022-08-02 22:37:06 -04:00
Dan Halbert
b027d111a9 remove custom console UART from sdkconfig-esp32.defaults 2022-08-02 22:00:59 -04:00
Dan Halbert
534a482d94 initial HUZZAH32 bring-up, with hacked pins 2022-08-02 21:47:46 -04:00
Dan Halbert
767234e79c
Merge pull request #6688 from tannewt/fix_esp32c3_paste 
Fix C3 when pasting 128+ characters
 2022-08-02 21:35:02 -04:00
Dan Halbert
524cc5e274
Merge pull request #6685 from tannewt/esp32_ww 
Enable Web Workflow on Feather ESP32 V2
 2022-08-02 21:30:23 -04:00
Scott Shawcroft
9de8ae70b6
Fix C3 when pasting 128+ characters 
The ringbuf used to fill up and the recv interrupt would block CP.
Now it'll disable the interrupt until we have enough room in the
ringbuf.

Fixes #6678
 2022-08-02 15:25:19 -07:00
Scott Shawcroft
1c69fe1727
Fix S2/S3 USB 
The new Kconfig that fixed C3 added a dependency on USB_OTG_SUPPORTED
that is only calculated if we include the usb module in cmake.

Fixes #6679
 2022-08-02 14:11:09 -07:00
Scott Shawcroft
74e841d835
Read fuses to know what flash and ram pins to never reset 2022-08-02 12:01:42 -07:00
Pontus Oldberg
dfcbc79cdf
Merge branch 'adafruit:main' into main 2022-08-02 14:07:09 +02:00
Bill Sideris
60429f51c7
Add official vid/pid 2022-08-02 09:43:17 +03:00
Scott Shawcroft
f0c6a8c49a
Odroid pin defs 2022-08-01 15:52:08 -07:00
Scott Shawcroft
9661d3256c
Add more ESP32 boards and enable web workflow 2022-08-01 15:52:08 -07:00
Dan Halbert
9baa2724a7 code formatting suggestion 2022-08-01 00:27:25 -04:00
Pontus Oldberg
03181fe362 Adds support for the Challenger RP2040 SubGHz board. 2022-07-31 10:36:04 +02:00
bill88t
c71cc4e0dd Add Waveshare ESP32-S2-Pico 2022-07-30 15:35:48 +03:00
Dan Halbert
1348cb435b Fix SAMD I2C frequency check 2022-07-29 19:07:33 -04:00
Scott Shawcroft
312e298890
Fix other ESP builds and arduino_nano_33_iot 2022-07-29 11:02:35 -07:00
Scott Shawcroft
d6344812e8
Lots of web workflow, C3 and title bar fixes 
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
  disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
  explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
  more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
  happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
  now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548.
* Adds version to title bar.
 2022-07-28 16:06:56 -07:00
Dan Halbert
3817d007aa clean up esp32 sdkconfigs 2022-07-28 17:52:27 -04:00
Scott Shawcroft
c4c15206e7
Merge pull request #6608 from tannewt/web_workflow_port 
Allow for dynamic reconfigure including port
 2022-07-28 12:59:31 -07:00
Dan Halbert
282f8c49a6
Merge pull request #6660 from tannewt/fix_c3_serial_tx 
Improve USB to Serial/JTAG TX
 2022-07-28 14:42:56 -04:00
Scott Shawcroft
cb5fa3eaa6
Merge pull request #6664 from dglaude/patch-1 
Add board.LED (alias of board.LED_R part of RGB)
 2022-07-28 11:26:31 -07:00
Scott Shawcroft
c29fa9012d
Merge pull request #6645 from prplz/seeed_xiao_esp32c3 
Add board: seeed_xiao_esp32c3
 2022-07-28 11:22:43 -07:00
David Glaude
2baf3455bd
Add board.LED (alias of board.LED_R part of RGB) 
Totally untested change (will try with the artifact), but I think every board should have a board.LED if possible to be able to use the learn guide basic instruction.
 2022-07-28 16:46:56 +02:00
Scott Shawcroft
ddeb833a3a
Shrink Feather S3 4mb build with -Os 2022-07-28 07:43:39 -07:00
Michael Himing
555bf7cc12 Add board: seeed_xiao_esp32c3 2022-07-28 22:48:03 +10:00
Scott Shawcroft
bea955222a
Improve USB to Serial/JTAG TX 
It had a tight 5ms timeout before that caused some characters to
drop. Now the wait is longer and reset after a successful transmit.
This follows what MicroPython does.

Fixes #6220
 2022-07-27 12:15:13 -07:00
Scott Shawcroft
ce60beeb25
Merge pull request #6651 from tannewt/refine_select_task 
Improve web workflow responsiveness
 2022-07-27 11:24:51 -07:00
Scott Shawcroft
6463755577
Merge pull request #6648 from pypewpew/stage-png 
Add PNG image support to the Stage library
 2022-07-27 11:02:48 -07:00
Scott Shawcroft
e9e2d8550c
Merge pull request #6657 from nitz/adafruit-magtag-2.9-add-boot0 
Adds `BOOT0` (`GPIO0`) as a named pin for MagTag.
 2022-07-27 11:01:26 -07:00
Chris Dailey
2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag. 2022-07-27 08:38:52 -04:00
Arudinne
a55aebc718 Added support for 8MB flash for Challenger 840 2022-07-26 20:34:01 -05:00
Scott Shawcroft
931757f4a9
Improve web workflow responsiveness 
1. Run the socket select task at the same priority as CP. This is
  needed because it queues up the background work. Without it, CP
  needed to sleep to let the lower priority task go.
2. Close the active socket on disconnect. This prevents looping
  over a disconnected but not closed socket.

Fixes #6610. Fixes #6613
 2022-07-26 15:29:49 -07:00
Radomir Dopieralski
d510e60511 Disable bitmaptools and busdevice on pewpew_m4 to fit ja translation 2022-07-27 00:08:02 +02:00
Neradoc
6e5c818311 fix extensions for atmel and 2 boards, matching main 2022-07-26 18:15:59 +02:00
Neradoc
87e8994c4a no default extension for ESP, fix duplicate line in rp2 2022-07-26 18:15:59 +02:00
Neradoc
eabe8b971a list extensions instead of macros names ("bin,uf2" not BIN_UF2) 
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
 2022-07-26 18:15:59 +02:00
Neradoc
d021d9ae4a Move build extensions to board directories 
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
 2022-07-26 18:15:50 +02:00
Scott Shawcroft
66d5fa9a55
Save space on Feather S3 4mb with -Os 2022-07-25 16:19:52 -07:00
Scott Shawcroft
6d6234443d
Merge remote-tracking branch 'adafruit/main' into web_workflow_port 2022-07-25 15:57:58 -07:00
Scott Shawcroft
acdfda7d0e
Merge pull request #6624 from bwshockley/bwshockley-figpi 
Add raspberrypi port - figpi
 2022-07-25 15:23:52 -07:00
Scott Shawcroft
c90167a9db
Merge pull request #6630 from ViktorWiz/w5500-evb-pico 
Add WIZNet W5500-EVB-Pico
 2022-07-25 15:16:32 -07:00
Scott Shawcroft
47f718aa92
Merge pull request #6615 from askpatrickw/beetle-esp32-c3 
Beetle esp32 c3
 2022-07-25 15:00:05 -07:00
Jeff Epler
955bcee1b3
It's OK for an init program to be zero bytes long 
Closes #6636
 2022-07-23 20:01:31 -05:00
ViktorWiz
ae6c0e347c Add WIZNet W5500-EVB-Pico 2022-07-22 17:31:58 +09:00
Benjamin Shockley
dc686545c2
Update pins.c 
Minor whitespace change.
 2022-07-20 15:40:43 -05:00
Benjamin Shockley
e9eeaf2096
Update mpconfigboard.h 
Moved UART to pins 24/25.
 2022-07-20 12:35:40 -05:00
Benjamin Shockley
d01b65dd32
Create pins.c 2022-07-20 12:35:08 -05:00
Benjamin Shockley
3861a97f38
Create pico-sdk-configboard.h 2022-07-20 12:18:22 -05:00
Benjamin Shockley
3647cfa424
Create mpconfigboard.mk 2022-07-20 12:17:39 -05:00
Benjamin Shockley
d2865764ca
Create mpconfigboard.h 
Added file.
 2022-07-20 12:12:31 -05:00
Benjamin Shockley
21af8f42cc
Create board.c 2022-07-20 11:11:49 -05:00
Dan Halbert
f2bbe5a6a1
Merge pull request #6614 from litui/litui-espressif-bleiofix 
Fixed empty characteristic issue with bleio+nimble.
 2022-07-20 08:42:31 -04:00
Dan Halbert
e877644012 use -Os on Feather ESP32-S3 TFT to shrink build 2022-07-19 17:45:29 -04:00
Dan Halbert
bb47484cb1 Merge remote-tracking branch 'adafruit/main' into from_bytes-check-parameters 2022-07-19 17:18:26 -04:00
Dan Halbert
1cdf325c96 shrink Feather ESP32S3 TFT 2022-07-19 16:35:23 -04:00
Dan Halbert
51f2253cef no Russian font for SAMD21; adjust unix build warnings 2022-07-19 14:07:18 -04:00
Patrick
1e99d68af7 Add Creator ID 2022-07-17 12:38:27 -07:00
Patrick
71c22232f0 board config compelted 2022-07-17 11:48:45 -07:00
Aria Burrell
868a03ff57 Fixed empty characteristic issue with bleio+nimble. 
- Based on espressif/nimble's blecent example code. Confirms that the characteristic is not empty before trying to catalogue its descriptors.
- Running ble_gattc_disc_all_dscs on empty (no length) characteristics fails with the (not-very-informative) BLE_HS_EINVAL error if this check is not performed.
 2022-07-17 04:50:50 -06:00
Scott Shawcroft
78b4159448
Allow for dynamic reconfigure including port 2022-07-15 16:33:12 -07:00
Jeff Epler
4e6fa55cba
Merge pull request #6591 from tannewt/web_workflow_ticks 
Add socket select task to wake CP
 2022-07-15 18:30:43 -05:00
Scott Shawcroft
c2a8ef752c
Remove ps2io to make space 2022-07-15 14:01:50 -07:00
Scott Shawcroft
6e7fdcc24b
Add wait for MDNS hostname to be set 2022-07-15 13:48:19 -07:00
Scott Shawcroft
145cce93da
Merge pull request #6596 from Neradoc/ble-name-in-dotenv 
Setup default BLE name in dotenv
 2022-07-14 15:46:28 -07:00
Jeff Epler
dcc27a8c88
Need to ensure wifi radio is set enabled again on esp32 
.. otherwise, nothing set it enabled on the second soft reboot.
 2022-07-14 15:09:26 -05:00
Jeff Epler
72f5537027
esp32: don't fully reset the wifi device 
.. this makes reconnecting without a full reset not work.

Because this works on other generations of the esp32 (c2, c3, etc),
apply this behavior only to esp32.

After this change, it's possible to connect multiple times to wifi in
different runs of code.py or the repl after soft rebooting.
 2022-07-14 15:01:15 -05:00
Neradoc
5ca6d8953d use available constants instead of testing errors for length 2022-07-14 11:55:53 +02:00
Neradoc
50a9beda04 Retrieve the BLE name from dotenv if available 
Format:
CIRCUITPY_BLE_NAME = My BLE Board

- the length is limited to 31 characters
- for the NRF version it repeatedly truncates the name if it's too long
- the ESP version defaults to "nimble" if the name is too long
 2022-07-14 11:55:53 +02:00
Scott Shawcroft
e9dd254127
Add socket select task to wake CP 
This fixes the web workflow on boards without a display.

Fixes #6552
 2022-07-13 17:35:35 -07:00
Scott Shawcroft
ac460dd1e1
Merge branch 'main' into esp32 2022-07-13 15:30:53 -07:00
Scott Shawcroft
2f9de1cb07
Merge pull request #6584 from tannewt/websocket_serial 
Add WebSocket at /cp/serial/
 2022-07-13 14:15:49 -07:00
Jeff Epler
09b754ffa0
espressif: Set heap size automatically, like micropython 
rather than setting the heap size statically, micropython allocates
the biggest contiguous chunk possible, but in no event more than half the
total internal sram. On esp32 this gives 123728 bytes of `gc.mem_free`
in the repl.
 2022-07-13 14:00:59 -05:00
Jeff Epler
09d1c846c4
Set heap size to 0 when heap allocation fails 2022-07-13 13:53:22 -05:00
Jeff Epler
c1b6c367ff
esp32 can allocate 88kB successfully 2022-07-13 13:53:08 -05:00
Jeff Epler
13be10ef14
rename function to avoid confusion 2022-07-13 13:28:51 -05:00
Jeff Epler
5c6ee20ca5
on esp32 need to initialize nvs before starting wifi 
Also, change error handling so that the esp-idf error number
is shown in the traceback in the case of an error.

This allows scanning & connecting to work. I didn't try requests yet.
 2022-07-13 11:57:38 -05:00
Jeff Epler
f620c2901c
Set a small but working heap size for esp32 without psram 2022-07-13 11:10:00 -05:00
Jeff Epler
ea52ca66dc
Disable SPIRAM bankswitch on esp32 
We don't use this facility, which was reserving the last 256kiB of
psram.
 2022-07-13 10:56:58 -05:00
Jeff Epler
953f44b46e
Fix spiram limit calculation on esp32 
esp32 places the psram start at SOC_EXTRAM_DATA_LOW and it can extend
up to SOC_EXTRAM_DATA_SIZE. This is different than esp32-s2 and later,
which place the end at EXTRAM_DATA_HIGH and the limitation of
SOC_EXTRAM_DATA_SIZE was not previously identified as important.
Additionally, the esp32 has a reserved area within himem which was
not being accounted for.

With this change, the Feather ESP32 V2 feather can be used via thonny,
and the other "quick memory corruption tests" I was performing
also all succeed instead of failing.

Before this change, the incorrect address being used for spiram was
0x3fa00000..0x3fc00000 (2MiB). Now, it's 0x3f800000..0x3f9c0000 (1.75MiB)
due to the reserved area and the changed start address.

This is intended to be a no-effect change for other espressif chips besides
original esp32.
 2022-07-13 10:52:15 -05:00
Jeff Epler
afbaa2eb6c
decode_backtrace: Show even more information 
addr2line can show information about how functions were inlined,
including function names

Typical new output:
```
0x400dec57: mp_obj_get_type at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:68
 (inlined by) mp_obj_print_helper at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:133
 (inlined by) mp_obj_print_helper at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:114
0x400e1a25: fun_builtin_1_call at /home/jepler/src/circuitpython/ports/espressif/../../py/objfun.c:75
0x400dd016: mp_call_function_n_kw at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:665
0x400eac99: mp_execute_bytecode at /home/jepler/src/circuitpython/ports/espressif/../../py/vm.c:936
0x400e1ae9: fun_bc_call at /home/jepler/src/circuitpython/ports/espressif/../../py/objfun.c:297 (discriminator 4)
0x400dd016: mp_call_function_n_kw at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:665
0x400dd03a: mp_call_function_0 at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:638
0x40117c03: parse_compile_execute at /home/jepler/src/circuitpython/ports/espressif/../../shared/runtime/pyexec.c:146
0x4011800d: pyexec_friendly_repl at /home/jepler/src/circuitpython/ports/espressif/../../shared/runtime/pyexec.c:734
0x400eeded: run_repl at /home/jepler/src/circuitpython/ports/espressif/../../main.c:823
 (inlined by) main at /home/jepler/src/circuitpython/ports/espressif/../../main.c:922
0x400ef5e3: app_main at /home/jepler/src/circuitpython/ports/espressif/supervisor/port.c:410
0x401bb461: main_task at /home/jepler/src/circuitpython/ports/espressif/build-adafruit_feather_esp32_v2/esp-idf/../../esp-idf/components/freertos/port/port_common.c:141
```
 2022-07-12 16:28:33 -05:00
Scott Shawcroft
9d5b04ebc4
Merge pull request #6577 from NathanY3G/uf2-family-id-for-stm32f405 
stm: Make family IDs consistent with TinyUF2
 2022-07-12 13:38:40 -07:00
Scott Shawcroft
23bbb19138
Merge remote-tracking branch 'adafruit/main' into websocket_serial 2022-07-12 13:15:38 -07:00
Scott Shawcroft
d9f6e99942
Fix RP2040 UART 
It couldn't receive more than 32 bytes in while checking in_waiting
because in_waiting didn't turn interrupts back on correctly.

Fixes #6579
 2022-07-11 13:36:44 -07:00
Scott Shawcroft
d8447de0b0
Merge pull request #6578 from xuhow/picoed_led_status 
Picoed led status
 2022-07-11 13:23:02 -07:00
Scott Shawcroft
c56f363a23
Merge pull request #6572 from todbot/wifi-tx-power-float 
Fix #6559
 2022-07-11 13:08:11 -07:00
Scott Shawcroft
e7703e89c9
Merge pull request #6567 from jepler/update-ulab-509 
update ulab to 5.0.9
 2022-07-11 13:05:41 -07:00
Melissa LeBlanc-Williams
08b4a64bd2 Update the PID 2022-07-11 08:39:10 -07:00
Xu Hao
be3482ff05 Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed 2022-07-11 16:51:06 +08:00
Nathan Young
f22f4f896a stm: Make family IDs consistent with TinyUF2 
This should allow UF2 images for STM32F405 boards to be flashed by
TinyUF2.
 2022-07-10 21:34:07 +02:00
Tod Kurt
a658007673
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:26 -07:00
Tod Kurt
22e061ba35
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:18 -07:00
Tod Kurt
98692150ac
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:12 -07:00
Tod Kurt
f464ec3047
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:02 -07:00
Dan Halbert
9d77a36fbf update samd-peripherals submodule 2022-07-08 22:47:36 -04:00
Melissa LeBlanc-Williams
bc14b7ad47 Fix the display on the esp box lite 2022-07-08 15:40:59 -07:00
Dan Halbert
2c7ad7a39f make translate and pre-commit formatting fixes 2022-07-08 16:53:53 -04:00
Melissa LeBlanc-Williams
3c093713dc Merge branch 'esp_box_lite' of https://github.com/tannewt/circuitpython into esp_box_lite 2022-07-08 13:46:14 -07:00
Dan Halbert
c316b950c7 merge from adafruit/main 2022-07-08 15:42:19 -04:00
Dan Halbert
d869b441f4 further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR 2022-07-08 15:27:00 -04:00
Dan Halbert
76e32dcf93 remove need for CIRCUITPY_ESP_PSRAM 2022-07-08 14:54:55 -04:00
Dan Halbert
afbf4de071 Uncomment or remove debugging changes 2022-07-08 12:53:25 -04:00
Dan Halbert
c3cd32e773 CPU freq to 240 MHz, redo sdkconfigs 2022-07-08 10:50:00 -04:00
Dan Halbert
75208573f4 tweak sdkconfig; add temp logging to mp_make_function_from_raw_code 2022-07-08 09:53:29 -04:00
Tod Kurt
d3e1d1b104 Fix #6559 2022-07-07 19:42:11 -07:00
Jeff Epler
ab3e786611
disable additional module on matrixportal_m4 2022-07-07 20:00:12 -05:00
Jeff Epler
c4dfd8e30a
Fix default BOARD setting & messages 
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
 2022-07-07 17:17:15 -05:00
Jeff Epler
601eb91b89
Disable gifio on matrixportal to reclaim flash space 2022-07-07 17:00:00 -05:00
Dan Halbert
4e88d795e1 Thonny causing crash emitglue.c:199: 2022-07-06 23:01:19 -04:00
Dan Halbert
4c20b3cb63
Merge pull request #6564 from adafruit/7.3.x 
7.3.x
 2022-07-06 15:25:24 -04:00
Scott Shawcroft
d83720f659
Tweak display init 2022-07-05 17:02:52 -07:00
Scott Shawcroft
cd77517b2f
Add build for ESP32-S3 Box Lite 2022-07-05 16:35:42 -07:00
Scott Shawcroft
18d7165e0f
Merge pull request #6550 from crackmonkey/rp2040-wait-pin-bounds 
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
 2022-07-05 12:56:14 -07:00
Nick Lopez
dce9396fe3 issue adafruit#6538 loose bounds checking on WAIT PIO instruction 2022-07-02 14:32:20 -07:00
Scott Shawcroft
07b2697ae3
WIP websocket to serial 2022-07-01 16:57:10 -07:00
Patrick
c3cf9ba9ce remove wifi max from sdkconfig 2022-07-01 14:50:47 -07:00
Patrick
aaeda97818 update PHY section, correct name 2022-07-01 14:50:47 -07:00
Patrick
aa53d36934 setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5 2022-07-01 14:50:47 -07:00
Patrick
7e367eeb58 Update "D" mappings 2022-07-01 14:50:47 -07:00
Patrick
d4b26daf1b correct creator and creation IDs 2022-07-01 14:50:47 -07:00
Patrick
6c7faf0eba Change USB VID & PID to Creator and Creation IDs 2022-07-01 14:50:47 -07:00
Patrick
3253ae2503 tested and corrected several pins 2022-07-01 14:50:47 -07:00
Patrick
f10fa566aa REPL works. Based on QTPYC3. 2022-07-01 14:50:47 -07:00
Patrick
a3070f6c2a Changes to Pin Mappings 2022-07-01 14:50:46 -07:00
Patrick
b37236f83f C3 does not have PSRAM 2022-07-01 14:50:46 -07:00
Patrick
af629ab180 Add assumed PID value 2022-07-01 14:50:46 -07:00
Patrick
c1e6003d26 remove comment that breaks {ID Checker 2022-07-01 14:50:46 -07:00
Patrick
9bae8549c5 add UART RX TX to mpconfigboard 2022-07-01 14:50:46 -07:00
Patrick
6763b7b968 add A5 2022-07-01 14:50:46 -07:00
Patrick
bcf27e146b fix build break and add io 20/21 2022-07-01 14:50:46 -07:00
Patrick
dc1c86738a Initial pin mapping pass 2022-07-01 14:50:46 -07:00
Patrick
fd4695d0f2 Gettting started with pin mapping. 2022-07-01 14:50:46 -07:00
Dan Halbert
8814ee03f1
Merge pull request #6542 from todbot/wifi-tx-power 
Add wifi.radio.tx_power
 2022-07-01 14:09:08 -04:00
Scott Shawcroft
7589e53fea
WIP websocket accept and hashlib 2022-07-01 10:18:33 -07:00
Dan Halbert
8bb369cac5 refactor debug UART to console UART; get working on ESP32 2022-06-30 23:16:46 -04:00
Dan Halbert
187f156ac7
Merge pull request #6534 from tannewt/esp_wdt_safe_mode 
Safe mode when ESP interrupt watchdog fires
 2022-06-30 22:56:35 -04:00
Dan Halbert
63873e2c14
Merge pull request #6528 from tannewt/cp_webserver 
Add web workflow to ESP boards
 2022-06-30 22:53:47 -04:00
Tod Kurt
698d563dcf adust wifi.radio.tx_power to be x4 (in db) as mentioned in #6540 2022-06-30 15:33:03 -07:00
Tod Kurt
2a563cc8ba first cut at wifi.radio.tx_power 2022-06-30 15:10:16 -07:00
Scott Shawcroft
71358a4a63
Merge pull request #6526 from xuhow/elecfreaks_picoed 
Add some frozen libraries to elecfreaks_picoed
 2022-06-30 11:53:59 -07:00
Dan Halbert
b0efd130c9 ESP32 REPL working through debug UART 2022-06-29 23:19:36 -04:00
Scott Shawcroft
3be3e89d82
Merge branch 'main' into cp_webserver 2022-06-29 14:01:32 -07:00
Dan Halbert
c3a149c14a
Merge pull request #6533 from tannewt/fix_connect_crash 
Fix auto-wifi created crash
 2022-06-29 16:51:33 -04:00
Scott Shawcroft
d42c811fb9
Safe mode when ESP interrupt watchdog fires 
This makes us enter safe mode when sleep on the S3 fails. The
task watchdog is used for the user watchdog.
 2022-06-29 12:31:18 -07:00
Scott Shawcroft
8dc8265275
Fix auto-wifi created crash 
The wifi event_handler runs on the other core so we need to be
careful when calling into CP APIs.

Fixes #6503
 2022-06-29 11:53:10 -07:00
Scott Shawcroft
1f065a313c
Update with startup fix instead of revert 2022-06-29 11:12:29 -07:00
Xu Hao
1599844b82 Add some frozen libraries to elecfreaks_picoed 2022-06-29 15:03:29 +08:00
Dan Halbert
780c4963cb wip; change never-ever reset pin mechanism 2022-06-28 23:06:49 -04:00
Scott Shawcroft
a8bb3eb557
Update to newer 4.4 branch 2022-06-28 15:38:55 -07:00
Dan Halbert
ca64950503 wip fixes 2022-06-28 18:32:08 -04:00
Dan Halbert
131d70cebd restore traceback to matrixportal build 2022-06-28 16:10:55 -04:00
Scott Shawcroft
41039445c9
Clean up and add docs 2022-06-27 13:39:09 -07:00
Scott Shawcroft
7acc5ebeb9
Add logo for going to home. Fix origin check 2022-06-27 13:39:09 -07:00
Scott Shawcroft
3cd05291d0
Static files + welcome page 2022-06-27 13:39:09 -07:00
Scott Shawcroft
7543dd9af0
CORS works and autoreload too 2022-06-27 13:39:08 -07:00
Scott Shawcroft
92593aa7a1
Fix bind, remove hard coded ip 2022-06-27 13:34:13 -07:00
Scott Shawcroft
4f0a7aedfd
WIP adding devices.json and auth 2022-06-27 13:34:13 -07:00
Scott Shawcroft
32478345f8
more tweaks 2022-06-27 13:34:13 -07:00
Scott Shawcroft
0882cbf823
web server kinda works 2022-06-27 13:34:13 -07:00
Scott Shawcroft
61d0f7947b
WIP doesn't flush response before closing 2022-06-27 13:34:13 -07:00
Scott Shawcroft
301f3e0456
Start of web server 2022-06-27 13:34:13 -07:00
Dan Halbert
55784c93de wip; compiles 2022-06-26 21:22:22 -04:00
Dan Halbert
02069eb0b5 wip 2022-06-23 15:59:06 -04:00
Scott Shawcroft
a055113ed5
Merge pull request #6520 from dhalbert/7.3.1-to-main 
Merge 7.3.1 changes to main
 2022-06-23 11:15:40 -07:00
Dan Halbert
b0219f9b5b
Merge pull request #6518 from xorbit/rp2040-shim 
Add board Silicognition LLC RP2040-Shim
 2022-06-23 11:04:40 -04:00
Dan Halbert
feb1d903f7 merge 7.3.1 to main 2022-06-23 09:07:49 -04:00
Scott Shawcroft
897297bba4
Merge pull request #6516 from Neradoc/setup-default-ports-hiibot-iots2 
Implement default busses to IOTS2
 2022-06-22 09:46:08 -07:00
Patrick Van Oosterwijck
0b80c62400
Merge branch 'adafruit:main' into rp2040-shim 2022-06-22 11:40:02 -05:00
Scott Shawcroft
25206a8aff
Merge pull request #6513 from dhalbert/7.3.x-6495-backport-ble-disconnect-check 
Test for a BLE disconnect while reading
 2022-06-22 09:38:24 -07:00
Neradoc
ba72287db4 Implement default ports to IOTS2 2022-06-22 07:24:27 +02:00
root
e8023f33a9 Test for a BLE disconnect while reading 2022-06-21 19:59:23 -04:00
root
1ad3daf75b Fix declaration of print_wakeup_cause 2022-06-21 19:56:15 -04:00
root
803c18c71f Uncommented call to print_wakeup_cause 2022-06-21 19:56:15 -04:00
root
d3903bf2f4 Fix for Issue #6478 2022-06-21 19:56:15 -04:00
Scott Shawcroft
562c73bcc7
Merge pull request #6458 from blues/swan_r5_3v3_enable 
fix(swan_r5): 3v3 was enabled but then immediately reset.
 2022-06-21 13:56:58 -07:00