Dan Halbert
296960dd89
shorten board.c
2022-10-05 20:23:19 -04:00
Neradoc
d31acdef6c
we don't use AUTORESET_DELAY_MS
2022-10-06 02:19:48 +02:00
Jeff Epler
2dc283f578
close underlying socket object when closing ssl socket
2022-10-05 15:10:14 -05:00
Jeff Epler
4a9389d347
remove debug message
2022-10-05 14:57:04 -05:00
Jeff Epler
14f2309b6f
Enable more key exchange methods
...
This is intended (but not entirely verified) to match our esp32 builds.
It does fix accessing https://circuitpython.org , which failed before with
"MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE".
It still doesn't work on a personal website of mine with valid letsencrypt
certificate but I haven't verified whether it works on esp32s2 with CP.
That site only allows TLS 1.3, while this mbedtls only supports up to
1.2.
The version of mbedtls we adopted based on micropython's use has no
TLS 1.3 support, but the one in espressif esp-idf does.
2022-10-05 14:56:27 -05:00
Jeff Epler
fabfdcf6fe
More ssl work
2022-10-05 14:56:26 -05:00
Jeff Epler
944d388158
copy esp_crt_bundle.c from esp-idf@d51f7d8821
2022-10-05 14:56:26 -05:00
Jeff Epler
a64c1a11c5
move nina-fw certificates so it can be shared with other ports
2022-10-05 14:56:25 -05:00
Jeff Epler
09023abcd2
Update espressif function prototype to match
2022-10-05 14:56:25 -05:00
Kyle Mohr
dd5f9411c8
Merge branch 'adafruit:main' into main
2022-10-05 13:44:12 -05:00
Jeff Epler
dcb650c513
pico w: add ssl module
...
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
2022-10-05 13:12:43 -04:00
Jeff Epler
2bd50673b6
Finish adapting flash storage size
...
Before this, CIRCUITPY would start at 1MB anyway. This appeared to work
only because I hadn't checked the actual size of the CIRCUITPY drive,
and because until now the flash hadn't actually crossed that 1MB
boundary into CIRCUITPY storage.
WARNING: on pico_w, upgrading/downgrading CircuitPython across this commit
boundary will erase the CIRCUITPY filesystem. After this commit,
switching between pico and pico_w firmware will erase the CIRCUITPY
filesystem
2022-10-05 10:02:38 -05:00
Jeff Epler
52bca95208
Refactor dotenv module so that it can be tested on host
...
.. it needs to operate on a FILE* rather than FIL depending on
the build.
Note that this is comparing output to expected, not to cpython dotenv
package. Because run-tests.py starts the CPython interpreter with the
'-S' (skip site initialization) flag, pip-installed packages are
not available for import inside a test file. Instead, the exp
file is generated manually:
```
circuitpython/tests$ python3 circuitpython/dotenv_test.py > circuitpython/dotenv_test.py.exp
```
Unfortunately, the test fails on test e15:
```diff
FAILURE /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py
--- /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py.exp 2022-10-04 09:48:16.307703128 -0500
+++ /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py.out 2022-10-04 09:48:16.307703128 -0500
@@ -14,7 +14,7 @@
line
e13 e13value
e14 None
-e15 e15value
+e15 None
e16 #
e17 def
e18 #has a hash
```
2022-10-04 09:51:27 -05:00
microDev
2618e11002
use next update partition
2022-10-04 19:42:48 +05:30
microDev
9fe7308b88
conditionally add storage extension
2022-10-04 17:26:28 +05:30
microDev
7d8ff20dac
add initial storage extension support
2022-10-04 17:25:48 +05:30
Kyle Mohr
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
Kyle Mohr
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
Kyle Mohr
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
Kyle Mohr
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
Kyle Mohr
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
Dan Halbert
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
Dan Halbert
ad79f595a5
Merge pull request #6974 from MicroDev1/patch
...
Couple Minor Fixes
2022-10-01 13:12:01 -04:00
Dan Halbert
7bb90dbf45
remove redundant port/*/.gitignore; cleanup others
2022-10-01 11:52:36 -04:00
Jeff Epler
40c2de833d
doc improvements
2022-10-01 10:09:33 -05:00
Jeff Epler
d3e85d165e
Set cyw43 power management as needed, default to disabled
...
.. the value actually needs to be enforced each time the STA or AP
is enabled, because internally there's a call to cyw43_wifi_pm with the
library's defaut power management value, not ours.
Add a getter, though it only returns our idea of what the power
management register is set to, it doesn't read out from the actual
hardware, sadly.
2022-10-01 08:20:34 -05:00
Jeff Epler
943b992bfc
Improve cyw43.set_power_management documentation
...
.. and provide 4 preset values
2022-10-01 07:52:08 -05:00
microDev
7eaeca4eb3
update espressif port's .gitignore
2022-10-01 09:14:48 +05:30
Dan Halbert
f9e655da47
Merge pull request #6962 from dhalbert/espressif-deep-sleep-hold-pins
...
Espressif: do not hold pins during deep sleep if not necessary
2022-09-30 22:20:44 -04:00
Dan Halbert
bced76887e
Merge pull request #6973 from jepler/rp2040-fix-warnings
...
Rp2040 fix warnings
2022-09-30 16:21:31 -04:00
Jeff Epler
c02602ace1
Enable strict-overflow diagnostic
2022-09-30 11:19:23 -05:00
Jeff Epler
afc1c0e3bb
Fix unused variable diagnostics, make it a fatal error
2022-09-30 11:19:22 -05:00
Jeff Epler
37620d4eb0
Fix several classes of compiler diagnostic & make fatal
...
* -Wno-nested-externs
* -Wno-strict-prototypes
* -Wno-double-promotion
* -Wno-sign-compare
2022-09-30 11:19:22 -05:00
Jeff Epler
c6eef3931f
Enable warning for unused static functions
2022-09-30 11:19:22 -05:00
Jeff Epler
2c9c6fc80e
Remove unused static functions
2022-09-30 11:19:21 -05:00
Jeff Epler
907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Jeff Epler
fcf7cfe838
Merge pull request #6960 from jepler/picow-server
...
Pico W: implement more things
2022-09-30 11:15:37 -05:00
Jeff Epler
0912889106
raspberrypi: statically allocate storage for hostname
2022-09-30 10:05:11 -05:00
Jeff Epler
84c7ac4a81
Make cyw43.set_power_management() be a function as intended
2022-09-30 07:56:59 -05:00
Jeff Epler
3281e14be1
fix reference to board module
2022-09-29 21:37:34 -05:00
Jeff Epler
4de9487820
It turns out you CAN have too many GPIO
2022-09-29 20:10:33 -05:00
Dan Halbert
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
flom84
7af8a23ddf
Use macro for computing size of array.
2022-09-29 22:10:21 +02:00
flom84
3609c29b27
Update STM DFU mode software implementation.
...
- fix for sizeof array calculation.
- follow ARM recommendation to turn off interruptions with NVIC.
2022-09-29 21:15:51 +02:00
Jeff Epler
510bd11f58
Enable reading back value of cyw43 pin
...
Now, `led.value = not led.value` works as a way to toggle the LED state.
Closes : #6959
2022-09-29 11:06:11 -05:00
Jeff Epler
a3bcfd6911
Add pin_CYW1 for SMPS_MODE
2022-09-29 10:54:06 -05:00
Jeff Epler
72b06021c0
fix doc formatting
2022-09-29 10:27:13 -05:00
Jeff Epler
74cdf42ece
pico w: implement bind, listen, accept
...
this works with some simple tcp & udp echo service code
2022-09-29 10:02:20 -05:00
Jeff Epler
12ea04ca70
Add cyw43.set_power_management
2022-09-29 10:02:20 -05:00
Jeff Epler
91f1266db5
Document CywPin
2022-09-29 10:02:19 -05:00
Jeff Epler
56f9f0d136
add tx power get/set
2022-09-29 10:02:19 -05:00
Jeff Epler
71a00157ba
Add hostname setting
2022-09-29 10:02:19 -05:00
Jeff Epler
c6d3163841
remove comment about something the Makefile does now
2022-09-29 10:02:18 -05:00
Dan Halbert
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
Jeff Epler
2dd6df9d93
better to explain why this file has no useful content
2022-09-28 15:19:06 -05:00
Jeff Epler
72bce51ce3
restore submodule commits
2022-09-28 14:48:54 -05:00
Jeff Epler
3d76aa00f5
implementations not needed
2022-09-28 14:38:13 -05:00
Jeff Epler
09d4fbc557
Remove FIXME
...
this was verbatim-copied from micropython
2022-09-28 14:38:13 -05:00
Jeff Epler
6189156a0b
Add missing NotImplementedErrors
2022-09-28 14:38:12 -05:00
Jeff Epler
edf1efd728
Add CYW43 guards to more things
2022-09-28 14:38:12 -05:00
Jeff Epler
e100981d90
revert CFLAGS change
2022-09-28 14:38:12 -05:00
Jeff Epler
4380292848
comment why not actually reset wifi
2022-09-28 14:38:11 -05:00
Jeff Epler
ff7731491e
Implement enough of socketpool to do ntp and non-https requests
2022-09-28 10:06:34 -05:00
Jeff Epler
a7a1bd7880
Implement DNS resolution
...
```
>>> s = socketpool.SocketPool(wifi.radio)
>>> s.getaddrinfo("google.com", 80)
[(0, 0, 0, '', ('142.250.81.206', 80))]
```
2022-09-28 10:06:33 -05:00
Jeff Epler
6c3cdceb45
Implement scan, connect, ping
...
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
Jeff Epler
22b04aef22
Reindent a block
2022-09-28 10:05:53 -05:00
Jeff Epler
9caa65cf28
allow a board to override link.ld
2022-09-28 10:05:53 -05:00
Jeff Epler
77fcb8a5a3
disable rainbowio on this arduino_nano_33_iot
...
The gpio changes took away enough code space that it doesn't fit.
2022-09-28 10:05:32 -05:00
Dan Halbert
39492b3403
Merge pull request #6951 from jepler/black-bindings
...
Black bindings
2022-09-27 17:57:07 -04:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
Jeff Epler
4e96667d50
Manual fix for oddball cases
2022-09-27 15:19:32 -05:00
Kattni Rembor
ea5e4b20b0
Add more spacing for aliased pins.
2022-09-27 15:50:30 -04:00
Kattni Rembor
9c4c7241d0
Update pin order to match silk.
2022-09-27 15:24:07 -04:00
flom_84
96a83ecbfe
Update mpconfigboard.h
2022-09-26 19:58:33 +02:00
flom84
e626502fd2
Add USB VID and PID from STM.
2022-09-26 19:45:33 +02:00
flom84
2bd2406d13
Update license info and remove redundant board functions.
2022-09-26 19:39:07 +02:00
Florin Maticu
8754a6ec53
Add circuitpython support for STM Nucleo-F446RE.
2022-09-26 19:12:42 +02:00
Dan Halbert
de80db681f
Merge pull request #6915 from dhalbert/ringbuf-cleanup
...
ringbuf cleanup
2022-09-25 17:50:21 -04:00
Jeff Epler
1c8e12660c
Merge pull request #6944 from Neradoc/doc-fix-usb-cdc
...
docs: usb_cdc.Serial.readinto has no nbytes parameter
2022-09-25 13:35:58 -05:00
Dan Halbert
e25c195b78
fix broadcom UART ringbuf init
2022-09-25 09:12:23 -04:00
Neradoc
5346b89b08
don't use @property in docs, just document as a property
2022-09-25 07:18:18 +02:00
Dan Halbert
d44edc4a0c
Merge pull request #6937 from jepler/issue6839
...
Use new unique ID for this board
2022-09-24 23:55:06 -04:00
Jeff Epler
f12136af7f
esp32-camera: sync doc with code.
...
Closes : #6836
2022-09-23 08:54:00 -05:00
Jeff Epler
5bbbca4d44
lock and unlock i2c bus around any ops that might access it
2022-09-22 17:03:05 -05:00
Jeff Epler
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
Dan Halbert
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
Dan Halbert
c567b43441
add CIRCUITPY_USB_IDENTIFICATION to turn off on smallest builds
2022-09-20 14:32:38 -04:00
Florin Maticu
745d83adac
DFU mode implementation for STM32F4 MCU.
2022-09-18 18:24:38 +02:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
Dan Halbert
8a568d18b5
Merge pull request #6757 from latkinso42/adcdma
...
analogbufio
2022-09-16 08:32:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
MicroDev
f994b11d52
Merge pull request #6909 from dhalbert/fesp32s2tft-remove-unneeded-code
...
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-16 10:18:13 +05:30
Dan Halbert
7914870f9a
Merge pull request #6908 from dhalbert/nrf-busio-none-empty-uart-read
...
nrf: return None when UART.read() reads nothing
2022-09-15 22:12:06 -04:00
Dan Halbert
6bb47038d5
Merge remote-tracking branch 'adafruit/main' into adcdma
2022-09-15 20:42:51 -04:00
Dan Halbert
0ab4f12dc4
fix some submodules commit skew
2022-09-15 20:36:29 -04:00
Dan Halbert
82694b7265
remove extraneous copyrights
2022-09-15 20:31:08 -04:00
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
3abfd212ec
nrf: return None when UART.read() reads nothing
2022-09-15 19:40:02 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
d2f28eb980
Merge pull request #6887 from RetiredWizard/Broadcom-UART
...
Enable CIRCUITPY_CONSOLE_UART by default on Broadcom boards
2022-09-13 14:35:16 -04:00
Dan Halbert
2b25a5d574
update esp32-camera
2022-09-13 13:16:37 -04:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
RetiredWizard
14b604f48c
Add LED pin definition to Zero 2W board
2022-09-10 23:18:25 -04:00
RetiredWizard
28756936d5
Add HW_LED_STATUS pin to Zero 2W board
2022-09-10 23:17:02 -04:00
RetiredWizard
38a0ca324e
Uses different pins for RX/TX
2022-09-10 21:48:10 -04:00
RetiredWizard
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:42:41 -04:00
RetiredWizard
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:40:31 -04:00
RetiredWizard
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:51 -04:00
RetiredWizard
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:03 -04:00
RetiredWizard
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:38:16 -04:00
RetiredWizard
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:37:31 -04:00
RetiredWizard
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:41 -04:00
RetiredWizard
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:01 -04:00
RetiredWizard
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:34:45 -04:00
RetiredWizard
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:33:29 -04:00
microDev
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Lee Atkinson
f279a2dbb2
Merge branch 'adafruit:main' into adcdma
2022-09-08 11:46:01 -04:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
latkinso42
c1f57c6ceb
Pushing for resolution
2022-09-07 18:53:35 -04:00
Dan Halbert
328138225b
Merge pull request #6868 from PontusO/main
...
Added challenger_rp2040_wifi_ble board
2022-09-07 18:36:52 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
latkinso42
25078a24a3
Attempt to fix Build-Docs and Pre-Commit
2022-09-06 18:58:57 -04:00
Pontus Oldberg
c043c437f7
Merge branch 'main' of https://github.com/PontusO/circuitpython
2022-09-06 09:37:25 +02:00
Pontus Oldberg
9a937e6ea3
Added challenger_rp2040_wifi_ble board.
2022-09-06 09:37:21 +02:00
latkinso42
5498b3ac91
fix to analogbufio BufferedIn.h
2022-09-05 14:22:08 -04:00
Scott Shawcroft
a09836eb4a
Merge pull request #6681 from PontusO/main
...
Adds support for the Challenger RP2040 SubGHz board
2022-09-05 10:01:51 -07:00
latkinso42
a1856ea3e9
Renaming module from adcbuffer to analogbufio
2022-09-05 12:11:49 -04:00
latkinso42
478b40ecf9
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Syncing with remote
2022-09-04 16:07:37 -04:00
Lee Atkinson
3cd8259a78
Merge branch 'adafruit:main' into adcdma
2022-09-04 15:59:20 -04:00
latkinso42
d7a1db5b87
Changes per review
2022-09-04 15:57:59 -04:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
Dan Halbert
449b43e5a6
Merge pull request #6863 from jepler/rp2pio-erroneous-mask
...
rp2pio: fix occasional bug when not using OUT pins
2022-09-04 09:15:35 -04:00
Jeff Epler
a3e17189a4
rp2pio: fix occasional bug when not using OUT pins
...
a NULL first pin object is used to indicate that there are zero
of some kind of pin associated with the StateMachine. However,
mask_and_rotate wasn't checking for zero. It actually read data from
near address 0x0 and (in my case) got a nonzero mask, which then
caused a program with GPIO11 and GPIO12 as input with pull-up and no
out pins to erroneously encounter the error "pull masks conflict with
direction masks"
2022-09-03 20:39:42 -05:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
latkinso42
6fe2ea4513
Merging back with updated main files
2022-09-02 15:51:45 -04:00
Pontus Oldberg
59fb3fbbd6
Merge branch 'adafruit:main' into main
2022-09-01 10:35:13 +02:00
Dan Halbert
52080e24eb
status bar control
2022-08-30 15:23:44 -04:00
Dan Halbert
3ba385ff5c
Merge pull request #6794 from jepler/esp32-camera-error-checking
...
Esp32 camera error checking
2022-08-30 11:41:42 -04:00
Dan Halbert
371e544a92
Merge pull request #6823 from pypewpew/ugame10-fix
...
Fix ugame.py for the ugame10 board
2022-08-29 12:34:02 -04:00
Jeff Epler
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c
...
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
2022-08-28 16:46:50 -05:00
Lee Atkinson
04af01a672
Pin Validation fixed/readmultiple return fixed
2022-08-27 14:47:12 -04:00
Radomir Dopieralski
0a0c03c3d2
Fix ugame.py for the ugame10 board
...
It was still trying to use the gamepad module, and there was a typo
2022-08-26 17:07:44 +02:00
Jeff Epler
ebd58155f2
bump pico-sdk to 1.4.0
2022-08-26 09:54:16 -05:00
Jeff Epler
dc27fb967d
error at runtime if no psram actually reserved
2022-08-26 09:27:50 -05:00
Jeff Epler
9f22e75e5e
error if camera is configured but no psram
2022-08-26 09:27:50 -05:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
Dan Halbert
83838fc4fd
Merge pull request #6798 from DavePutz/issue_6735
...
Fix handling of zero-length pulseout pulse
2022-08-25 07:49:28 -04:00
Lee Atkinson
37b6079c05
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Reconciling remote updates
2022-08-24 21:46:28 -04:00
Lee Atkinson
55c0404d85
Merge branch 'adafruit:main' into adcdma
2022-08-24 21:07:12 -04:00
Lee Atkinson
6fd08483e2
Tidying code for PR/ Minor Issues
2022-08-24 17:41:51 -04:00
DavePutz
c00a630f50
Update PulseOut.c
...
reorder the tests for zero-length
2022-08-23 15:58:27 -05:00
root
3daebb36c3
Fix handling of zero-length pulseout pulse
2022-08-23 15:17:54 -05:00
Jeff Epler
6572f85913
Merge pull request #6779 from dhalbert/matrixportal-more-ram
...
matrixportal: remove ulab to make room to freeze portalbase
2022-08-23 09:41:36 -06:00
Lee Atkinson
e23b621d69
Fixing 8 bit and 12 bit conversion
2022-08-22 18:55:55 -04:00
Lee Atkinson
f5655dd48c
Fixing Build errors/ DMA Xfer Rate
2022-08-21 11:44:40 -04:00
Lee Atkinson
68671399d1
More formating
2022-08-19 10:51:13 -04:00
Lee Atkinson
d3c3c9eac4
Tidy a few things
2022-08-18 19:10:16 -04:00
Lee Atkinson
f91af513b7
Introduced odule adcbuffer / removed analogio/AnalogFastIn
2022-08-18 16:23:17 -04:00
Dan Halbert
0c87d0b40d
matrixportal: remove ulab instead of bleio HCI
2022-08-18 10:23:37 -04:00
Lee Atkinson
34b8fbaf14
Merge branch 'adafruit:main' into adcdma
2022-08-18 09:08:10 -04:00
Dan Halbert
2664d3766d
matrixportal: remove BLEIO HCI to make room to freeze portalbase
2022-08-18 07:43:31 -04:00
arturo182
23f2b62196
Add the Solder Party BBQ20KBD board
2022-08-17 20:44:23 +02:00
Scott Shawcroft
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix
...
Fix ESP32 touch; rework common code a bit
2022-08-17 10:24:22 -07:00
Dan Halbert
2bc8d73776
Fix ESP32 touch; rework common code a bit
2022-08-16 20:04:27 -04:00
Scott Shawcroft
4b1d1fd72d
Merge pull request #6768 from mayrhomar/main
...
Add Waveshare ESP32-S2-Pico-LCD
2022-08-16 09:50:46 -07:00
Scott Shawcroft
3fbddfde59
Merge pull request #6758 from gamblor21/rp2040_i2ctarget
...
Rp2040 i2ctarget support
2022-08-15 13:57:49 -07:00
Martin
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
Lee Atkinson
4542c801b0
Tidying up loose endson draft PR
2022-08-14 13:03:33 -04:00
lady ada
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
gamblor21
7584363f66
Forgot an include
2022-08-13 17:41:45 -05:00
gamblor21
1ae2a2154e
Initial i2ctaret commit
2022-08-13 17:00:43 -05:00
MicroDev
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset
...
Audit all boards with LED pins defined
2022-08-13 15:25:02 +05:30
Lee Atkinson
8cd12b2478
Copyright Change
2022-08-12 16:01:58 -04:00
Lee Atkinson
81c7ba899d
Copyright Update/Acknowledgements
2022-08-12 13:57:45 -04:00
Lee Atkinson
6d8e8c71fc
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Fixing code behind commits
2022-08-11 17:58:46 -04:00
Lee Atkinson
ce24469848
Merge branch 'adafruit:main' into adcdma
2022-08-11 17:57:01 -04:00
Lee Atkinson
c3c1e307c4
Sample Rate Enhancements
2022-08-11 17:50:30 -04:00
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
Scott Shawcroft
5823bcc744
Merge branch 'main' into c3_short_send
2022-08-11 12:45:02 -07:00
Scott Shawcroft
f1053fb963
Introduce port_yield()
...
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
2022-08-11 11:25:34 -07:00
Lee Atkinson
5fb5fd0558
Merge branch 'adafruit:main' into adcdma
2022-08-10 18:33:52 -04:00
Scott Shawcroft
f9d724c09e
Fix retries after successful connection.
...
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)
Also, remove extra code from websocket that is leftover from
debugging.
2022-08-10 15:24:08 -07:00
Jeff Epler
c2a45c1f27
Merge pull request #6739 from jepler/qrio-esp32camera
...
Enable qrio to work with rgb565 data, including byte-swapped data
2022-08-10 13:54:40 -05:00
Scott Shawcroft
7a5d2e81fc
Merge pull request #6734 from dhalbert/remove-autobrightness
...
Remove support for auto-brightness
2022-08-10 10:22:53 -07:00
Jeff Epler
86f9d98a5d
fix documentation of framebuffer_count
2022-08-10 11:12:54 -05:00
Dan Halbert
af64faae1e
switch back one I2C message
2022-08-10 12:06:43 -04:00
Lee Atkinson
e778112710
Merge branch 'adafruit:main' into adcdma
2022-08-10 10:29:17 -04:00
Lee Atkinson
9e0c580d3d
AnalogFastIn
2022-08-10 09:42:24 -04:00
Dan Halbert
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
Dan Halbert
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
Scott Shawcroft
138c92f035
Merge pull request #6727 from dhalbert/restore-deleted-modules
...
restore rainbowio and onewireio to a number of boards
2022-08-09 21:44:26 -07:00
Dan Halbert
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
Scott Shawcroft
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
Jeff Epler
5040e1b7a5
Merge pull request #6684 from jepler/espressif-camera-2
...
Rewrite camera support for the Espressif port
2022-08-09 18:50:25 -05:00
Scott Shawcroft
db837e2b48
Merge pull request #6725 from dhalbert/esp-stack-size-16kB
...
increase main task stack size from 8kB to 16kB
2022-08-09 16:40:16 -07:00
Scott Shawcroft
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
Scott Shawcroft
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
Dan Halbert
c4db71d12e
Merge pull request #6721 from dhalbert/i2c-target
...
Change I2C terminology from "peripheral" to "target"
2022-08-09 16:12:17 -04:00
Dan Halbert
34b22eac2a
restore rainbowio and onewireio to a number of boards
2022-08-09 16:10:17 -04:00
Dan Halbert
4021b44a39
increase main task stack size from 8kB to 16kB
2022-08-09 15:00:01 -04:00
Scott Shawcroft
df52d995ed
Merge pull request #6714 from dannystaple/patch-2
...
Improve docs for rp2Pio Statemachine frequency
2022-08-09 10:50:27 -07:00
Scott Shawcroft
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
Scott Shawcroft
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
Scott Shawcroft
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
Jeff Epler
c74746f052
Cross references in documentation always help
2022-08-09 12:20:02 -05:00
Dan Halbert
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
Scott Shawcroft
d95cfc3abc
Merge pull request #6719 from dhalbert/huzzah32-web-workflow
...
enable web workflow on Feather HUZZAH32
2022-08-09 10:08:39 -07:00
Jeff Epler
5a85b8ab95
improve docstrings based on my best sleuthing
2022-08-09 11:42:19 -05:00
Jeff Epler
ec839d6f90
these items should not have been disabled
2022-08-09 11:42:19 -05:00
Jeff Epler
f87e34b9ed
add shutter button
2022-08-09 11:42:19 -05:00
takayoshiotake
5ce3778d75
Add custom board: Octave RP2040
2022-08-09 22:19:38 +09:00
Dan Halbert
10275001ac
enable web workflow on Feather HUZZAH32
2022-08-09 07:26:18 -04:00
paul
15ad24ba62
ran pre-commit.
2022-08-09 04:32:21 -04:00
Danny Staple
3c1c477c5b
Improve docs for rp2Pio Statemachine frequency
...
This frequency can be set to 0 for the system (133mhz) clock speed.
2022-08-08 22:14:55 +01:00
lady ada
2cd9222e5e
add includes
2022-08-07 14:32:29 -04:00
lady ada
029b6b6fbe
add default display
2022-08-07 14:12:40 -04:00
paul
a6eadd6259
Added Bee Motion S3 board
2022-08-07 11:59:43 -04:00
paul
f39058edc4
Added Bee S3 board
2022-08-06 22:22:20 -04:00
Lee Atkinson
f69939c49c
First Commit for AnalogFastIn
2022-08-06 16:22:50 -04:00
Lee Atkinson
56c44f6265
Merge remote-tracking branch 'origin/main'
2022-08-06 15:53:54 -04:00
Lee Atkinson
552f6af4a1
clean up
2022-08-06 15:50:22 -04:00
Jeff Epler
1a11ff864a
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 21:08:12 -05:00
Jeff Epler
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 16:38:51 -05:00
Scott Shawcroft
207311b02a
Merge branch 'main' into title_execution_status
2022-08-05 13:42:58 -07:00
Dan Halbert
8c10e09ba0
Merge pull request #6667 from jepler/esp-reserve-heap-for-idf
...
Add ability to reserve psram
2022-08-05 15:06:44 -04:00
Jeff Epler
3f49d77036
Improve esp32-s3-eye board definition
2022-08-05 13:10:21 -05:00
Scott Shawcroft
e7d72b1ebe
Use libgcc from Arch on SAMD21 (it's smaller.)
...
Fixes #4705
2022-08-04 16:33:41 -07:00
Scott Shawcroft
83cbbc9946
Add BLE status to title bar
2022-08-04 16:33:10 -07:00
Scott Shawcroft
125b276af0
Get CIRCUITPY FATFS directly.
...
Otherwise, you may actually get a non-root filesystem.
Fixes #6575
2022-08-04 16:06:27 -07:00
Jeff Epler
861fa9625d
Add the ESP32-EYE aka ESP-EYE
2022-08-04 15:12:12 -05:00
Jeff Epler
98202c8568
Allow changing camera settings that require reinit
...
These can only be changed in a group, though any items to keep
unchanged can be unspecified or specified as None.
2022-08-04 15:12:11 -05:00
Jeff Epler
428fbcd343
remove debug message during build
2022-08-04 15:12:10 -05:00
Jeff Epler
0e26a937cc
Disable camera everywhere it doesn't fit
2022-08-04 15:12:08 -05:00
