2bdccf03a7
cpb: define the SPEAKER_ENABLE_PIN
...
This allows the board to disable the onboard speaker until explicitly
enabled in user code.
Testing performed on a CPB:
* Touching the AUDIO pin with a fingertip no longer generates noise/buzz
* Generating a waveform with `simpleio.tone` produces no sound by default
* When the board.SPEAKER_ENABLE is configured as a digital output and
set True, `simpleio.tone` does produce sound
Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to
speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
speaker_enable.direction = digitalio.Direction.OUTPUT
speaker_enable.value = True
before using the internal speaker.
Closes : #2258
2019-11-01 16:26:03 -05:00
fe47eba97f
nRF: Handle SPEAKER_ENABLE_PIN
...
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
2019-11-01 16:23:35 -05:00
8d0cc71aee
Add write protections, fix edge case read halt
2019-11-01 17:00:01 -04:00
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks
2019-11-01 13:20:58 -07:00
e605ce6317
Debugging additions
2019-11-01 14:30:28 -04:00
0a1a12b867
Revise PWM period generation algorithm to match other ports
2019-10-31 16:59:44 -04:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
c78d79938d
remove debug output
2019-10-30 17:07:16 -04:00
a8070a4185
Revise IRQ managment, add restart on failure
2019-10-30 16:59:53 -04:00
bb8046dbb3
remove debug messages
2019-10-30 10:00:50 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
6b0cb87cbf
Dynamic prescaler adjustment, adjust pulse resolution
2019-10-29 17:17:26 -04:00
4de5a33a43
Style changes
2019-10-29 10:24:26 -04:00
33deb6752b
Add harder resets to UART
2019-10-29 09:41:52 -04:00
e35eb08f1d
nrf: allocate two I2C on CPB
2019-10-28 21:08:53 -04:00
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
3034cfc82f
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-28 12:16:01 -04:00
69bf926211
Merge remote-tracking branch 'upstream/master' into stm32-PWM
2019-10-28 12:01:28 -04:00
1d7d9043c1
CXD56 is a better platform name
2019-10-28 10:47:09 -04:00
358920db0e
Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only
2019-10-28 10:40:10 -04:00
c0f1ce590e
Add support across dev boards
2019-10-27 20:17:10 -04:00
7fd5e9b867
Fix issue with changing frequency
2019-10-27 19:41:01 -04:00
0cd8c3d5a8
Add all basic functions, never reset, dynamic pulse changes
2019-10-27 19:17:01 -04:00
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
...
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
cb491e855c
WIP
2019-10-27 14:31:25 -04:00
76817eaa10
Merge remote-tracking branch 'adafruit/master' into nano-33-ble
2019-10-25 22:41:26 -04:00
ab6fd34828
add object types to rgb status objects;mark spi rgb objects as never_reset
2019-10-25 22:32:43 -04:00
7d04d9109e
use bitbang SPI for DotStar; still need to fix hw SPI for dotstar
2019-10-25 15:37:27 -04:00
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
cdeb0857a9
Initial Itsy nRF52840 defn
2019-10-25 11:15:34 -04:00
cf7efee0d3
Add f405 pindefs
2019-10-24 18:00:50 -04:00
7f769580bd
Merge remote-tracking branch 'upstream/master' into stm32-PWM
2019-10-24 14:11:51 -04:00
3683ee3ffa
Merge pull request #2243 from hierophect/f405-rename-and-fixes
...
STM32: rename feather_stm32f405_express, fix makefile defs issue
2019-10-24 14:11:17 -04:00
511071e1ba
Rename feather across folders and config, fix makefile def issue
2019-10-24 12:51:40 -04:00
64337775f8
PWM Base functionality testing for F405
2019-10-24 12:43:34 -04:00
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
af1fab1915
Merge pull request #2226 from kamtom480/circuitpython-device-open
...
Do not open the same PWM device if it is already open
2019-10-23 15:08:40 -04:00
91c9d519ae
Refine comments and switch prefix_len to size_t
2019-10-22 23:09:56 -07:00
1d8a75fa3f
minor WIP
2019-10-22 13:11:45 -04:00
ca4b7f81e5
Initial template setup
2019-10-22 11:09:46 -04:00
ae30a1e5aa
Refine _bleio
...
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.
It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.
Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.
Relates to #586
2019-10-21 18:57:03 -07:00
a596213526
non-functional WIP
2019-10-21 17:06:40 -04:00
e4574fa3bf
Clean UART on reset
2019-10-21 13:17:51 +02:00
af28474b06
IRQ priority and port clearing scratchwork
2019-10-18 14:10:41 -04:00
e2cb29f2a0
Change default stack size to 64kiB for Spresense
2019-10-18 15:43:06 +02:00
3ad13e14d8
Do not open the same UART device again
2019-10-18 12:39:52 +02:00
b39ca3f8be
Do not open the same PWM device again
2019-10-18 12:39:22 +02:00
1decd111d5
Do not open the same ADC device again
2019-10-18 12:38:39 +02:00
4338511b28
Add get top and limit functions for Spresense
2019-10-18 11:10:22 +02:00
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
30c9ad2b2a
Update Spresense SDK to 1.4.1
2019-10-18 10:29:32 +02:00
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
14c64159c8
Implement requested changes, refactors
2019-10-16 13:50:54 -04:00
323fe418f7
Add support for other F4 MCUs
2019-10-16 13:14:57 -04:00
552900f18e
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-16 12:33:31 -04:00
b4a6246e30
Cleanup
2019-10-16 12:32:34 -04:00
14eefaafee
Hack in interrupt support
2019-10-16 11:33:55 -04:00
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
6f2e2faff2
Merge pull request #2214 from dhalbert/remove-unused-ports
...
Remove non-CircuitPython ports
2019-10-15 09:45:53 -07:00
a0d18ac4e6
add dummy common_hal_mcu_processor_get_voltage() for spresense
2019-10-15 09:07:12 -04:00
eca73436c9
Merge remote-tracking branch 'adafruit/master' into cpu-voltage
2019-10-15 09:03:24 -04:00
fdd7ebef2d
change calibration from analogin_reset() to analogin_init()
2019-10-14 23:38:41 -04:00
1a7c787d3c
Merge branch 'master' into master
2019-10-14 19:47:46 -07:00
615ec7f74d
merge from upstream
2019-10-14 18:12:58 -04:00
51582abc87
Merge pull request #2207 from kamtom480/circuitpython-spresense
...
Add Spresense board
2019-10-14 14:19:09 -07:00
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
b750ed3a0f
Change Spresense firmware download link
2019-10-14 08:42:10 +02:00
8dfc8b584f
Change Spresense reference_voltage to 0.0 (None)
2019-10-14 08:22:14 +02:00
9c8f969b34
remove ports/zephyr
2019-10-13 11:09:55 -04:00
0bed5f490a
remove ports/windows
2019-10-13 11:09:43 -04:00
8f792127da
remove ports/teensy
2019-10-13 11:09:03 -04:00
fc033bd954
remove ports/stm32
2019-10-13 11:08:52 -04:00
7bc02ad3ba
remove ports/qemu-arm
2019-10-13 11:08:35 -04:00
6dcaeae8c7
remove ports/pic16bit
2019-10-13 11:08:08 -04:00
c575cd7bc7
remove ports/minimal
2019-10-13 11:07:40 -04:00
7692e06230
remove ports/esp8266
2019-10-13 11:07:07 -04:00
41ef2ab591
remove ports/esp32
2019-10-13 11:06:54 -04:00
b0d656683b
remove ports/cc3200
2019-10-13 11:06:33 -04:00
3d17e1d418
remove ports/bare-arm
2019-10-13 11:06:17 -04:00
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
fae6e29546
nrf: PWMAudioOut: deactivate PWM when deinitting self
...
.. otherwise, when an AudioPWMOut object was deinitted without being
explicitly stop()ped, it would use up a slot in active_audio[]; the
5th iteration would create a non-working audio object which would just
buzz instead of playing the right thing.
Closes : #2203
2019-10-12 14:01:35 +09:00
ef459326cb
nrf: PWMAudioOut: coding style
2019-10-12 13:57:31 +09:00
1140ff5cd5
WIP
2019-10-11 15:47:55 -04:00
6b9375804c
Rename circuitpython.spk to firmware.spk
2019-10-11 17:15:25 +02:00
771f43591a
Add links to serial drivers
2019-10-11 12:57:43 +02:00
eb1dfd2312
Add .gitignore
2019-10-11 12:11:48 +02:00
0d139e4eca
Add a way to change serial device name
2019-10-11 12:09:51 +02:00
c062990830
Make Makefile work across OS
2019-10-11 12:09:51 +02:00
8f653d6238
Use CXD56 pin names
2019-10-11 12:09:51 +02:00
5f09609d41
Add Spresense board folder
2019-10-11 12:09:51 +02:00
1fa8841d20
Change port name to cxd56
2019-10-11 08:23:51 +02:00
bfebbaee32
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-10 14:28:19 -04:00
06b2fed518
improve macro readability
2019-10-09 16:06:23 -04:00
4ce7a4cfdb
Merge branch 'master' into stm32-DAC
2019-10-09 15:47:43 -04:00
5f33c542b4
Fix include issues
2019-10-09 14:52:30 -04:00
8a94f25181
Text fixes
2019-10-09 13:54:40 -04:00
cb0ed264c4
Implement DAC
2019-10-09 13:34:20 -04:00
6d1748fd59
Add spresense-exported-sdk submodule
2019-10-09 08:38:50 +02:00
526925f1c6
Add Spresense board
2019-10-09 08:27:08 +02:00
f58d54cd22
Preliminary read system, not buffered
2019-10-08 16:03:51 -04:00
f6e553f89f
Merge branch 'master' into circuitpython-number-endpoint
2019-10-08 09:41:29 +02:00
cc3a17845c
Fix USB issues, frequency macro, F412 tests
2019-10-07 14:22:12 -04:00
59ed879c8f
Merge pull request #2197 from hierophect/always-build-modules
...
Sort some modules into ALWAYS-BUILD in mpconfig
2019-10-07 09:09:28 -04:00
7aefcc449a
Add an alternative way to number the USB endpoints
...
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
2019-10-07 12:31:42 +02:00
0b85172ba6
WIP
2019-10-04 14:37:18 -04:00
51901f7de0
Add peripheral definitions
2019-10-04 11:42:38 -04:00
dc4abb922b
Revert accidental OS delete
2019-10-03 15:40:46 -04:00
f4922a530a
Merge pull request #2186 from hierophect/stm32-spi-flash
...
STM32: SPI Flash
2019-10-03 15:32:56 -04:00
7a2f60c43d
Add Always Build flag, remove redundancy
2019-10-03 15:23:45 -04:00
eacdb1da6e
Disable timeout, remove redundancy
2019-10-03 14:43:25 -04:00
463415a7ef
update stm32f4 port to use tinyusb synopsys tree
2019-10-03 13:26:03 -04:00
83c49a5c80
Increase SPI timeout duration
2019-10-03 09:14:54 -04:00
5a6194839b
Timeout fix for I2C device testing
2019-10-02 17:59:42 -04:00
86305bfdfe
Make all errors value errors
2019-10-02 17:32:54 -04:00
9aa6d215fd
Add some definitions for when F412 can be implemented
2019-10-02 16:03:22 -04:00
5a2f82095a
Implement SPI flash settings, bugfix for SPI pin assignment
2019-10-02 15:17:49 -04:00
d6e987e587
Merge pull request #2182 from hierophect/stm32-spi
...
STM32: SPI Support
2019-09-30 20:00:23 -07:00
b66700720b
improve error readability
2019-09-30 18:05:07 -04:00
1f90cffc89
protect against edge case
2019-09-30 13:33:20 -04:00
56eb9666ea
Implement never-reset, fix F412
2019-09-30 11:35:40 -04:00
a475b667b5
Clean up debugging messages, remove shortcuts
2019-09-30 11:04:09 -04:00
492bc3eedc
Expand pin definitions for all boards
2019-09-30 10:45:02 -04:00
e2d0ad6adc
Add settings reconfiguration
2019-09-29 15:01:32 -04:00
bf7b841020
Further reversion
2019-09-29 13:22:12 -04:00
89315999e2
Fix bad returns, revert flash changes
2019-09-29 13:18:43 -04:00
270396a882
Refine SPI settings for testing
2019-09-29 13:01:27 -04:00
d7443fce54
First implementation of read write
2019-09-27 17:59:55 -04:00
ad33950966
Flash memory changes - non functional
2019-09-27 11:00:09 -04:00
aa1eed3bd3
initial Arduino Nano 33 BLE board definition
2019-09-26 15:28:57 -04:00
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
51df8d18b4
Merge remote-tracking branch 'upstream/master' into stm32-spi
2019-09-26 13:44:24 -04:00
8221553600
Merge pull request #2175 from hierophect/stm32-f405-support
...
STM32 F405 support
2019-09-26 10:38:03 -07:00
f4a31a7843
Update PID to suggestion
...
USB_PID = 0x805C (Pyboard
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2019-09-26 11:38:08 -04:00
f08127bfcc
WIP
2019-09-26 11:35:08 -04:00
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
a926d01509
reorganize pins
2019-09-25 11:53:49 -04:00
f286737868
add peripheral definitions
2019-09-25 11:37:27 -04:00
jepler
Hierophect
Scott Shawcroft
brentru
ladyada
Dan Halbert
Dan Halbert
Thea Flowers
Thea Flowers
ProductDev
Kamil Tomaszewski
wallarug
Scott Shawcroft
Cedar Grove Maker Studios
kamtom480
arturo182