4a25c2344e
implement os urandom
2019-11-18 18:27:25 -05:00
a4797327cd
add microcontroller toggles for status LED
2019-11-18 13:51:59 -05:00
40a47d41df
samd: background: Allow monitoring time taken in background task
...
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
2019-11-18 11:01:24 -06:00
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
51078cc38f
timing tweaks with testing
2019-11-15 17:17:05 -05:00
98fd372d5b
Add missing define
2019-11-15 13:19:37 -05:00
ee1559b921
Merge branch 'pin-commonhal-additions' into stm32-neopixel
2019-11-15 13:09:59 -05:00
81223c76bd
revert error
2019-11-15 13:04:25 -05:00
5f290d091e
Merge branch 'pin-commonhal-additions' into stm32-neopixel
2019-11-15 13:00:11 -05:00
2c6781f74d
move neopixel_in_use flag to shared-bindings
2019-11-15 12:59:52 -05:00
e1579a1cc5
Merge branch 'pin-commonhal-additions' into stm32-neopixel
2019-11-15 12:47:23 -05:00
de5691acf5
Add never_reset and reset to pin common hal, adjust files
2019-11-15 12:47:00 -05:00
6cce2d6d14
Implement Neopixel write, add defaults to f405
2019-11-15 12:28:16 -05:00
6e96b1945e
Raise clock speed, adjust divisors
2019-11-13 13:18:43 -05:00
166518fc9b
Merge pull request #2272 from hierophect/stm32-microcontroller-fillout
...
STM32: add us delay
2019-11-12 18:03:55 -05:00
e40bd07fcf
fix conflicting definitions on discovery boards
2019-11-12 13:03:13 -05:00
bbc366b85b
Style overhaul, extra error checks
2019-11-12 11:26:14 -05:00
ed3e377390
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-11-12 09:49:17 -05:00
14b70806a5
de-init check
2019-11-11 15:47:47 -05:00
e076f14ea3
text fixes
2019-11-11 15:32:47 -05:00
c38086fc4a
fix typo
2019-11-11 15:04:22 -05:00
3f8b4727f5
Revise us delay to include interrupt/non-interrupt versions
2019-11-11 14:58:45 -05:00
91156670e9
Merge pull request #2271 from theacodes/enable-micropython-native
...
Allow boards to enable the `micropython.native` decorator
2019-11-08 13:42:17 -05:00
d42c4b082d
revert sublime being a dumb
2019-11-06 14:55:16 -05:00
39dbcb529a
revert git being a dumb
2019-11-06 14:54:07 -05:00
adfef8b520
Merge remote-tracking branch 'upstream/master' into stm32-dac-deinit
2019-11-06 14:46:56 -05:00
b8373aca0c
Merge pull request #2266 from hierophect/stm32-defaults
...
STM32: Add board defaults
2019-11-06 14:29:29 -05:00
c7195c4bc5
Allow boards to enable the `micropython.native` decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
e66fcb5e1f
add missing newline
2019-11-05 16:32:34 -05:00
8a098c154d
Fix unsaved file
2019-11-05 16:25:30 -05:00
1a7060af25
Add us delay
2019-11-05 16:23:59 -05:00
0b85c4bb20
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-11-05 10:56:57 -05:00
dfe73a063d
Fix error that would carry past python exception
2019-11-05 10:50:57 -05:00
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
...
Refine _bleio
2019-11-04 22:27:54 -05:00
c87d6cc6a5
Merge pull request #2248 from hierophect/stm32-PWM
...
STM32: PWMOut
2019-11-04 22:08:01 -05:00
f185b30d71
Update PWMOut.h
2019-11-04 20:41:54 -05:00
38e38b9f8d
remove redundant comment
2019-11-04 17:20:10 -05:00
632b3267dc
Add auto-shutoff of DAC when channels de-inited
2019-11-04 17:08:00 -05:00
40f920fbdf
complete attribution edits
2019-11-04 14:39:41 -05:00
ca1eb4def1
Add other board globals
2019-11-04 14:35:23 -05:00
2111a7c4cf
Merge branch 'master' into stm32-defaults
2019-11-04 14:32:00 -05:00
3526fed611
add board global
2019-11-04 14:31:57 -05:00
15d8d88950
Add default defines
2019-11-04 14:15:26 -05:00
ccff7e70ca
Style changes and refactors
2019-11-04 11:30:49 -05:00
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
...
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
1c4f49bb83
attribution changes
2019-11-03 16:33:01 -05:00
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c
...
nrf: allocate two I2C on CPB
2019-11-03 13:15:36 -08:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2bdccf03a7
cpb: define the SPEAKER_ENABLE_PIN
...
This allows the board to disable the onboard speaker until explicitly
enabled in user code.
Testing performed on a CPB:
* Touching the AUDIO pin with a fingertip no longer generates noise/buzz
* Generating a waveform with `simpleio.tone` produces no sound by default
* When the board.SPEAKER_ENABLE is configured as a digital output and
set True, `simpleio.tone` does produce sound
Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to
speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
speaker_enable.direction = digitalio.Direction.OUTPUT
speaker_enable.value = True
before using the internal speaker.
Closes : #2258
2019-11-01 16:26:03 -05:00
fe47eba97f
nRF: Handle SPEAKER_ENABLE_PIN
...
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
2019-11-01 16:23:35 -05:00
8d0cc71aee
Add write protections, fix edge case read halt
2019-11-01 17:00:01 -04:00
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks
2019-11-01 13:20:58 -07:00
e605ce6317
Debugging additions
2019-11-01 14:30:28 -04:00
0a1a12b867
Revise PWM period generation algorithm to match other ports
2019-10-31 16:59:44 -04:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
c78d79938d
remove debug output
2019-10-30 17:07:16 -04:00
a8070a4185
Revise IRQ managment, add restart on failure
2019-10-30 16:59:53 -04:00
bb8046dbb3
remove debug messages
2019-10-30 10:00:50 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
6b0cb87cbf
Dynamic prescaler adjustment, adjust pulse resolution
2019-10-29 17:17:26 -04:00
4de5a33a43
Style changes
2019-10-29 10:24:26 -04:00
33deb6752b
Add harder resets to UART
2019-10-29 09:41:52 -04:00
e35eb08f1d
nrf: allocate two I2C on CPB
2019-10-28 21:08:53 -04:00
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
3034cfc82f
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-28 12:16:01 -04:00
69bf926211
Merge remote-tracking branch 'upstream/master' into stm32-PWM
2019-10-28 12:01:28 -04:00
1d7d9043c1
CXD56 is a better platform name
2019-10-28 10:47:09 -04:00
358920db0e
Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only
2019-10-28 10:40:10 -04:00
c0f1ce590e
Add support across dev boards
2019-10-27 20:17:10 -04:00
7fd5e9b867
Fix issue with changing frequency
2019-10-27 19:41:01 -04:00
0cd8c3d5a8
Add all basic functions, never reset, dynamic pulse changes
2019-10-27 19:17:01 -04:00
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
...
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
cb491e855c
WIP
2019-10-27 14:31:25 -04:00
76817eaa10
Merge remote-tracking branch 'adafruit/master' into nano-33-ble
2019-10-25 22:41:26 -04:00
ab6fd34828
add object types to rgb status objects;mark spi rgb objects as never_reset
2019-10-25 22:32:43 -04:00
7d04d9109e
use bitbang SPI for DotStar; still need to fix hw SPI for dotstar
2019-10-25 15:37:27 -04:00
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
cdeb0857a9
Initial Itsy nRF52840 defn
2019-10-25 11:15:34 -04:00
cf7efee0d3
Add f405 pindefs
2019-10-24 18:00:50 -04:00
7f769580bd
Merge remote-tracking branch 'upstream/master' into stm32-PWM
2019-10-24 14:11:51 -04:00
3683ee3ffa
Merge pull request #2243 from hierophect/f405-rename-and-fixes
...
STM32: rename feather_stm32f405_express, fix makefile defs issue
2019-10-24 14:11:17 -04:00
511071e1ba
Rename feather across folders and config, fix makefile def issue
2019-10-24 12:51:40 -04:00
64337775f8
PWM Base functionality testing for F405
2019-10-24 12:43:34 -04:00
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
af1fab1915
Merge pull request #2226 from kamtom480/circuitpython-device-open
...
Do not open the same PWM device if it is already open
2019-10-23 15:08:40 -04:00
91c9d519ae
Refine comments and switch prefix_len to size_t
2019-10-22 23:09:56 -07:00
1d8a75fa3f
minor WIP
2019-10-22 13:11:45 -04:00
ca4b7f81e5
Initial template setup
2019-10-22 11:09:46 -04:00
ae30a1e5aa
Refine _bleio
...
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.
It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.
Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.
Relates to #586
2019-10-21 18:57:03 -07:00
a596213526
non-functional WIP
2019-10-21 17:06:40 -04:00
e4574fa3bf
Clean UART on reset
2019-10-21 13:17:51 +02:00
af28474b06
IRQ priority and port clearing scratchwork
2019-10-18 14:10:41 -04:00
e2cb29f2a0
Change default stack size to 64kiB for Spresense
2019-10-18 15:43:06 +02:00
3ad13e14d8
Do not open the same UART device again
2019-10-18 12:39:52 +02:00
b39ca3f8be
Do not open the same PWM device again
2019-10-18 12:39:22 +02:00
Hierophect
Jeff Epler
Cedar Grove Maker Studios
Dan Halbert
Thea Flowers
Dan Halbert
Scott Shawcroft
Scott Shawcroft
brentru
ladyada
Thea Flowers
ProductDev
Kamil Tomaszewski