| .. |
|
ADAFRUIT_F405_EXPRESS
|
stm32/boards: Add new board ADAFRUIT_F405_EXPRESS.
|
2019-10-11 11:50:36 +11:00 |
|
B_L072Z_LRWAN1
|
stm32/boards: Disable onewire module on boards with small flash.
|
2021-02-17 14:42:46 +11:00 |
|
B_L475E_IOT01A
|
stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
|
2019-10-04 16:10:13 +10:00 |
|
CERB40
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
ESPRUINO_PICO
|
stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
|
2019-10-15 21:36:24 +11:00 |
|
HYDRABUS
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
LIMIFROG
|
stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
|
2019-10-04 16:10:13 +10:00 |
|
MIKROE_CLICKER2_STM32
|
stm32/mboot: Add support for littlefs.
|
2020-06-26 21:17:02 +10:00 |
|
NADHAT_PYBF405
|
stm32/boards: Add NADHAT_PYB405 board.
|
2019-10-18 11:41:22 +11:00 |
|
NETDUINO_PLUS_2
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
NUCLEO_F091RC
|
extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
|
2019-11-11 11:37:38 +11:00 |
|
NUCLEO_F401RE
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
NUCLEO_F411RE
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
NUCLEO_F412ZG
|
stm32/boards: Add board config for Nucleo-F412ZG development board.
|
2020-05-15 10:48:48 +10:00 |
|
NUCLEO_F413ZH
|
stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally.
|
2019-07-09 11:32:12 +10:00 |
|
NUCLEO_F429ZI
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
NUCLEO_F446RE
|
stm32/boards/NUCLEO_F446RE: Enable DAC.
|
2019-07-08 16:08:40 +10:00 |
|
NUCLEO_F722ZE
|
stm32/boards/NUCLEO_F722ZE: Add definition files for new board.
|
2019-07-25 16:31:36 +10:00 |
|
NUCLEO_F746ZG
|
stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl.
|
2019-09-11 11:20:58 +10:00 |
|
NUCLEO_F767ZI
|
stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash.
|
2019-12-19 11:43:19 +11:00 |
|
NUCLEO_H743ZI
|
stm32/boards/NUCLEO_H743ZI: Enable ethernet peripheral.
|
2020-12-08 15:27:51 +11:00 |
|
NUCLEO_L073RZ
|
stm32/boards: Disable onewire module on boards with small flash.
|
2021-02-17 14:42:46 +11:00 |
|
NUCLEO_L432KC
|
stm32/boards: Disable onewire module on boards with small flash.
|
2021-02-17 14:42:46 +11:00 |
|
NUCLEO_L452RE
|
stm32/boards/NUCLEO_L452RE: Add definition files for new board.
|
2019-07-08 16:50:45 +10:00 |
|
NUCLEO_L476RG
|
stm32/boards/NUCLEO_L476RG: Add 5 remaining UARTs.
|
2021-04-09 15:00:55 +10:00 |
|
NUCLEO_WB55
|
stm32/boards/NUCLEO_WB55: Enable LPUART1 on PA2/PA3.
|
2021-02-21 15:49:33 +11:00 |
|
OLIMEX_E407
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
PYBD_SF2
|
stm32/boards/PYBD_SF2: Enable RF switch compile option.
|
2021-04-30 10:16:15 +10:00 |
|
PYBD_SF3
|
stm32: Include .ARM section in firmware for C++ exception handling.
|
2021-04-06 12:11:15 +10:00 |
|
PYBD_SF6
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
PYBLITEV10
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
PYBV3
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
PYBV4
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
PYBV10
|
stm32/boards: Enable LFS2 on PYBv1.x and PYBD boards.
|
2019-11-26 00:08:57 +11:00 |
|
PYBV11
|
stm32/boards: Enable LFS2 on PYBv1.x and PYBD boards.
|
2019-11-26 00:08:57 +11:00 |
|
STM32F4DISC
|
all: Reformat C and Python source code with tools/codeformat.py.
|
2020-02-28 10:33:03 +11:00 |
|
STM32F7DISC
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
STM32F411DISC
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
STM32F429DISC
|
stm32/sdram: Expose the result of sdram startup test in stm32_main.
|
2020-02-04 18:18:41 +11:00 |
|
STM32F439
|
stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
|
2019-06-25 14:18:24 +10:00 |
|
STM32F769DISC
|
stm32/sdcard: Allow configuring the SDMMC periph used for SD/MMC card.
|
2021-04-30 00:58:17 +10:00 |
|
STM32L476DISC
|
drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.
|
2020-12-18 13:39:32 +11:00 |
|
STM32L496GDISC
|
stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
|
2019-10-04 16:10:13 +10:00 |
|
USBDONGLE_WB55
|
stm32/boards/USBDONGLE_WB55: Add USE_MBOOT support.
|
2020-09-08 23:53:12 +10:00 |
|
common_basic.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_bl.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_blifs.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_bss_heap_stack.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_extratext_data_in_flash_app.ld
|
stm32: Support C++ code and user C modules written in C++.
|
2020-10-29 23:35:36 +11:00 |
|
common_extratext_data_in_flash_text.ld
|
stm32: Support C++ code and user C modules written in C++.
|
2020-10-29 23:35:36 +11:00 |
|
common_extratext_data_in_flash.ld
|
stm32: Support C++ code and user C modules written in C++.
|
2020-10-29 23:35:36 +11:00 |
|
common_ifs.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
make-pins.py
|
stm32/uart: Add support for LPUART1 on L0, L4, H7 and WB MCUs.
|
2021-02-21 15:49:32 +11:00 |
|
manifest.py
|
stm32: Enable and freeze uasyncio.
|
2020-03-26 01:25:45 +11:00 |
|
openocd_stm32f4.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
openocd_stm32f7.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
openocd_stm32l4.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
pllvalues.py
|
stm32/boards/pllvalues.py: Support wider range of PLL values for F413.
|
2021-04-20 23:33:33 +10:00 |
|
stm32f0xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32f4xx_hal_conf_base.h
|
stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs.
|
2021-05-04 16:53:40 +10:00 |
|
stm32f4xx_prefix.c
|
stm32/pin: In pin AF object, remove union of periph ptr types.
|
2018-04-11 16:14:58 +10:00 |
|
stm32f7xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32f091_af.csv
|
stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs.
|
2018-06-18 13:05:24 +10:00 |
|
stm32f091xc.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f401_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32f401xd.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f401xe.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f405_af.csv
|
stm32/boards/stm32f405_af.csv: Fix typo in ETH_RMII_REF_CLK on PA1.
|
2019-11-11 12:02:14 +11:00 |
|
stm32f405.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f411_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32f411.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f412_af.csv
|
stm32: Add support for F412 MCUs.
|
2020-05-15 10:08:30 +10:00 |
|
stm32f412zx.ld
|
stm32: Add support for F412 MCUs.
|
2020-05-15 10:08:30 +10:00 |
|
stm32f413_af.csv
|
stm32: Add support for F413 MCUs.
|
2019-05-02 16:26:53 +10:00 |
|
stm32f413xg.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f413xh.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f429_af.csv
|
stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX.
|
2019-01-31 01:02:42 +11:00 |
|
stm32f429.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f439_af.csv
|
|
|
|
stm32f439.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f722_af.csv
|
|
|
|
stm32f722.ld
|
stm32/boards/stm32f722.ld: Provide memory regions for internal FS.
|
2019-07-25 16:31:36 +10:00 |
|
stm32f746_af.csv
|
stm32/boards/stm32f746_af.csv: Add ADC alt functions to correct pins.
|
2020-01-30 16:31:11 +11:00 |
|
stm32f746.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f767_af.csv
|
stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list.
|
2018-03-07 18:40:06 +11:00 |
|
stm32f767.ld
|
stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash.
|
2019-12-19 11:43:19 +11:00 |
|
stm32f769.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32h7xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32h743_af.csv
|
stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table.
|
2019-02-06 13:34:53 +11:00 |
|
stm32h743.ld
|
stm32/boards/stm32h743.ld: Enable D2 RAM and add eth-buffer section.
|
2020-12-08 15:27:27 +11:00 |
|
stm32l0xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32l4xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32l072_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32l072xz.ld
|
stm32/boards: Add MCU support files for STM32L072.
|
2019-07-05 17:26:03 +10:00 |
|
stm32l432_af.csv
|
stm32/boards: Add STM32L432KC chip configuration files.
|
2018-12-06 13:32:43 +11:00 |
|
stm32l432.ld
|
stm32/boards: Optimise flash and RAM allocation for L4 boards.
|
2019-07-01 16:57:20 +10:00 |
|
stm32l452_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32l452xe.ld
|
stm32: Add support for STM32L452 MCUs.
|
2019-07-08 16:50:19 +10:00 |
|
stm32l476_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32l476xe.ld
|
stm32/boards: Optimise flash and RAM allocation for L4 boards.
|
2019-07-01 16:57:20 +10:00 |
|
stm32l476xg.ld
|
stm32/boards: Optimise flash and RAM allocation for L4 boards.
|
2019-07-01 16:57:20 +10:00 |
|
stm32l496_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32l496xg.ld
|
stm32/boards: Optimise flash and RAM allocation for L4 boards.
|
2019-07-01 16:57:20 +10:00 |
|
stm32wb55_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32wb55xg.ld
|
stm32/rfcore: Update rfcore.c to match how ST examples work.
|
2020-09-08 23:53:02 +10:00 |
|
stm32wbxx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
ca0c75f504