djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.

Browse Source 
The previous commit changed the default configuration on L4 MCUs to use
LSI, so configure these boards to use LSE again.
This commit is contained in:
Damien George 2019-10-04 16:03:37 +10:00
parent 266146ad64
commit 26e90a0514
5 changed files with 15 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.h
View File

@ -12,9 +12,11 @@
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV7)
#define MICROPY_HW_CLK_PLLR (RCC_PLLR_DIV2)
#define MICROPY_HW_CLK_PLLQ (RCC_PLLQ_DIV4)
#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4
// The board has an external 32kHz crystal
#define MICROPY_HW_RTC_USE_LSE (1)
// USART1 config connected to ST-Link
#define MICROPY_HW_UART1_TX (pin_B6)
#define MICROPY_HW_UART1_RX (pin_B7)

4
ports/stm32/boards/LIMIFROG/mpconfigboard.h
View File

@ -16,9 +16,11 @@ void LIMIFROG_board_early_init(void);
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV7)
#define MICROPY_HW_CLK_PLLR (RCC_PLLR_DIV2)
#define MICROPY_HW_CLK_PLLQ (RCC_PLLQ_DIV2)
#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4
// The board has an external 32kHz crystal
#define MICROPY_HW_RTC_USE_LSE (1)
// USART config
#define MICROPY_HW_UART3_TX (pin_C10)
#define MICROPY_HW_UART3_RX (pin_C11)

3
ports/stm32/boards/NUCLEO_L432KC/mpconfigboard.h
View File

@ -25,6 +25,9 @@
#define MICROPY_HW_CLK_PLLP (7)
#define MICROPY_HW_CLK_PLLQ (2)
// The board has an external 32kHz crystal
#define MICROPY_HW_RTC_USE_LSE (1)
// UART config
#define MICROPY_HW_UART1_TX (pin_B6)
#define MICROPY_HW_UART1_RX (pin_B7)

3
ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.h
View File

@ -15,6 +15,9 @@
#define MICROPY_HW_CLK_PLLQ (RCC_PLLQ_DIV2)
#define MICROPY_HW_CLK_PLLR (RCC_PLLR_DIV2)
// The board has an external 32kHz crystal
#define MICROPY_HW_RTC_USE_LSE (1)
// UART config
#define MICROPY_HW_UART2_TX (pin_A2)
#define MICROPY_HW_UART2_RX (pin_A3)

4
ports/stm32/boards/STM32L496GDISC/mpconfigboard.h
View File

@ -14,9 +14,11 @@
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV7)
#define MICROPY_HW_CLK_PLLR (RCC_PLLR_DIV2)
#define MICROPY_HW_CLK_PLLQ (RCC_PLLQ_DIV2)
#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4
// The board has an external 32kHz crystal
#define MICROPY_HW_RTC_USE_LSE (1)
// USART config
#define MICROPY_HW_UART2_TX (pin_A2)
#define MICROPY_HW_UART2_RX (pin_D6)