circuitpython/ports/stm32/boards
Damien George 67fd58bbd2 stm32/mboot: Add support for littlefs.
Mboot now supports FAT, LFS1 and LFS2 filesystems, to load firmware from.
The filesystem needed by the board must be explicitly enabled by the
configuration variables MBOOT_VFS_FAT, MBOOT_VFS_LFS1 and MBOOT_VFS_LFS2.
Boards that previously used FAT implicitly (with MBOOT_FSLOAD enabled) must
now add the following config to mpconfigboard.h:

    #define MBOOT_VFS_FAT (1)

Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:17:02 +10:00
..
ADAFRUIT_F405_EXPRESS stm32/boards: Add new board ADAFRUIT_F405_EXPRESS. 2019-10-11 11:50:36 +11:00
B_L072Z_LRWAN1 stm32/boards: Disable pend_throw, uheapq, utimeq on small-flash boards. 2020-03-28 13:55:59 +11:00
B_L475E_IOT01A stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards. 2019-10-04 16:10:13 +10:00
CERB40 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
ESPRUINO_PICO stm32: Convert to use FROZEN_MANIFEST to specify frozen code. 2019-10-15 21:36:24 +11:00
HYDRABUS stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
LIMIFROG stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards. 2019-10-04 16:10:13 +10:00
MIKROE_CLICKER2_STM32 stm32/mboot: Add support for littlefs. 2020-06-26 21:17:02 +10:00
NADHAT_PYBF405 stm32/boards: Add NADHAT_PYB405 board. 2019-10-18 11:41:22 +11:00
NETDUINO_PLUS_2 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
NUCLEO_F091RC extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports. 2019-11-11 11:37:38 +11:00
NUCLEO_F401RE stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
NUCLEO_F411RE stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
NUCLEO_F412ZG stm32/boards: Add board config for Nucleo-F412ZG development board. 2020-05-15 10:48:48 +10:00
NUCLEO_F413ZH stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally. 2019-07-09 11:32:12 +10:00
NUCLEO_F429ZI stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
NUCLEO_F446RE stm32/boards/NUCLEO_F446RE: Enable DAC. 2019-07-08 16:08:40 +10:00
NUCLEO_F722ZE stm32/boards/NUCLEO_F722ZE: Add definition files for new board. 2019-07-25 16:31:36 +10:00
NUCLEO_F746ZG stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl. 2019-09-11 11:20:58 +10:00
NUCLEO_F767ZI stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash. 2019-12-19 11:43:19 +11:00
NUCLEO_H743ZI stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. 2019-12-19 16:54:33 +11:00
NUCLEO_L073RZ stm32/boards: Disable pend_throw, uheapq, utimeq on small-flash boards. 2020-03-28 13:55:59 +11:00
NUCLEO_L432KC stm32/boards: Disable pend_throw, uheapq, utimeq on small-flash boards. 2020-03-28 13:55:59 +11:00
NUCLEO_L452RE stm32/boards/NUCLEO_L452RE: Add definition files for new board. 2019-07-08 16:50:45 +10:00
NUCLEO_L476RG stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards. 2019-10-04 16:10:13 +10:00
NUCLEO_WB55 stm32/boards: Add build-time option for NUCLEO_WB55 to use mboot. 2020-06-22 14:18:15 +10:00
OLIMEX_E407 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
PYBD_SF2 stm32/mboot: Add support for littlefs. 2020-06-26 21:17:02 +10:00
PYBD_SF3 stm32/boards: Enable LFS2 on PYBD_SF3 and PYBD_SF6. 2020-06-25 16:32:48 +10:00
PYBD_SF6 stm32/boards: Enable LFS2 on PYBD_SF3 and PYBD_SF6. 2020-06-25 16:32:48 +10:00
PYBLITEV10 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
PYBV3 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
PYBV4 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
PYBV10 stm32/boards: Enable LFS2 on PYBv1.x and PYBD boards. 2019-11-26 00:08:57 +11:00
PYBV11 stm32/boards: Enable LFS2 on PYBv1.x and PYBD boards. 2019-11-26 00:08:57 +11:00
STM32F4DISC all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
STM32F7DISC stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
STM32F411DISC stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
STM32F429DISC stm32/sdram: Expose the result of sdram startup test in stm32_main. 2020-02-04 18:18:41 +11:00
STM32F439 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code. 2019-06-25 14:18:24 +10:00
STM32F769DISC stm32/boards/STM32F769DISC: Use macro instead of const for flash size. 2020-06-12 10:28:26 +10:00
STM32L476DISC stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
STM32L496GDISC stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards. 2019-10-04 16:10:13 +10:00
USBDONGLE_WB55 stm32/boards/xxx_WB55: Enable pyb.ADC and hardware SPI on WB55 boards. 2020-06-02 10:48:49 +10:00
common_basic.ld stm32/boards: Add common_basic.ld for a board to have a single section. 2018-03-27 21:29:45 +11:00
common_bl.ld stm32/boards: Add common_bl.ld for boards that need a bootloader. 2018-03-27 21:30:45 +11:00
common_blifs.ld stm32/boards: Add configuration for putting mboot on PYBv1.x. 2018-12-04 23:48:18 +11:00
common_ifs.ld stm32/boards: Allow boards to have finer control over the linker script. 2018-03-27 21:17:48 +11:00
make-pins.py all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
manifest.py stm32: Enable and freeze uasyncio. 2020-03-26 01:25:45 +11:00
openocd_stm32f4.cfg stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img. 2018-12-13 13:43:10 +11:00
openocd_stm32f7.cfg stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img. 2018-12-13 13:43:10 +11:00
openocd_stm32l4.cfg stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img. 2018-12-13 13:43:10 +11:00
pllvalues.py all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
stm32f0xx_hal_conf_base.h stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings. 2019-06-25 14:18:24 +10:00
stm32f4xx_hal_conf_base.h stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings. 2019-06-25 14:18:24 +10:00
stm32f4xx_prefix.c stm32/pin: In pin AF object, remove union of periph ptr types. 2018-04-11 16:14:58 +10:00
stm32f7xx_hal_conf_base.h stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings. 2019-06-25 14:18:24 +10:00
stm32f091_af.csv stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs. 2018-06-18 13:05:24 +10:00
stm32f091xc.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f401_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32f401xd.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f401xe.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f405.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f405_af.csv stm32/boards/stm32f405_af.csv: Fix typo in ETH_RMII_REF_CLK on PA1. 2019-11-11 12:02:14 +11:00
stm32f411.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f411_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32f412_af.csv stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
stm32f412zx.ld stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
stm32f413_af.csv stm32: Add support for F413 MCUs. 2019-05-02 16:26:53 +10:00
stm32f413xg.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f413xh.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f429.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f429_af.csv stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX. 2019-01-31 01:02:42 +11:00
stm32f439.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f439_af.csv stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16 11:55:07 +10:00
stm32f722.ld stm32/boards/stm32f722.ld: Provide memory regions for internal FS. 2019-07-25 16:31:36 +10:00
stm32f722_af.csv stm32/boards: Add .ld and af.csv files for STM32F722. 2018-06-22 15:39:10 +10:00
stm32f746.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f746_af.csv stm32/boards/stm32f746_af.csv: Add ADC alt functions to correct pins. 2020-01-30 16:31:11 +11:00
stm32f767.ld stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash. 2019-12-19 11:43:19 +11:00
stm32f767_af.csv stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list. 2018-03-07 18:40:06 +11:00
stm32f769.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32h7xx_hal_conf_base.h stm32/boards/NUCLEO_H743ZI: Enable FDCAN on this board. 2019-09-23 17:00:54 +10:00
stm32h743.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32h743_af.csv stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table. 2019-02-06 13:34:53 +11:00
stm32l0xx_hal_conf_base.h stm32/boards: Add MCU support files for STM32L072. 2019-07-05 17:26:03 +10:00
stm32l4xx_hal_conf_base.h stm32/adc: Add support to pyb.ADC for STM32WB MCUs. 2020-06-02 10:48:49 +10:00
stm32l072_af.csv stm32/boards: Add MCU support files for STM32L072. 2019-07-05 17:26:03 +10:00
stm32l072xz.ld stm32/boards: Add MCU support files for STM32L072. 2019-07-05 17:26:03 +10:00
stm32l432.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32l432_af.csv stm32/boards: Add STM32L432KC chip configuration files. 2018-12-06 13:32:43 +11:00
stm32l452_af.csv stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
stm32l452xe.ld stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
stm32l476_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32l476xe.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32l476xg.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32l496_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32l496xg.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32wb55_af.csv stm32/boards/stm32wb55_af.csv: Fix ADC pin-channel function mapping. 2019-09-06 17:56:34 +10:00
stm32wb55xg.ld stm32/boards: Add build-time option for NUCLEO_WB55 to use mboot. 2020-06-22 14:18:15 +10:00
stm32wbxx_hal_conf_base.h stm32/boards: Add MCU support files for STM32WB55. 2019-07-17 16:50:42 +10:00