Commit Graph

337 Commits

Author SHA1 Message Date
Damien George 43d50f006d stm32/mpconfigport.h: Let MICROPY_PY_IO_FILEIO take its default value.
This is enabled at MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES, which is the
default for stm32.  Not setting the value in mpconfigboard.h allows boards
to optionally configure it.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-07 13:25:48 +10:00
Damien George bf89e336b9 stm32/boards/PYBD_SF2: Turn on SD card in mboot init if SD enabled.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
iabdalkader a16dcc8136 stm32/boards: Convert F4xx and F7xx to new flash FS config.
Following on from 35e70c1698.

Fixes issue #8390.
2022-03-17 13:06:45 +11:00
Christophe Priouzeau 130f7db1fc stm32/boards/NUCLEO_WB55: Add Arduino pin alias definitions.
Fixes issue #8295.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
2022-02-18 14:45:49 +11:00
Damien George a7530cbc03 stm32/boards/NUCLEO_L432KC: Disable MICROPY_OPT_COMPUTED_GOTO.
To save space, after recent fixes to L4 ADC made it overflow flash.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 14:28:21 +11:00
Damien George e306f2285b stm32/boards/NUCLEO_WL55: Add new board definition.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Damien George e0a0719416 stm32: Add initial support for STM32WL MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Damien George 9127e63708 stm32/Makefile: Make stm32lib configurable.
The default stm32lib remains lib/stm32lib, but it can now be easily
overriden at build time by specifying STM32LIB_DIR, or STM32LIB_CMSIS_DIR
and STM32LIB_HAL_DIR.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Herwin Grobben 8f68e26f79 stm32: Add support for G4 MCUs, and add NUCLEO_G474RE board defn.
This commit adds support for the STM32G4 series of MCUs, and a board
definition for NUCLEO_G474RE.  This board has the REPL on LPUART1 which is
connected to the on-board ST-link USB-UART.
2022-02-01 16:21:01 +11:00
Damien George df3f59ca4b ports: Update board.json files to link to new board images.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00
Matt Trentini f2b5c99fde stm32/boards/OLIMEX_H407: Fix typo in OLIMEX H407 board.json.
Appears incorrectly as E407 in the download manager.
2021-12-20 12:32:46 +11:00
iabdalkader bedd9c5463 stm32/boards/make-pins.py: Generate empty ADC table if needed.
If ADCx pins are hidden, print an empty table to prevent linker errors.
2021-12-20 09:41:46 +11:00
Damien George 6995cf03dd stm32/sdcard: Add config option to force MM card capacity.
The current ST HAL does not support reading the extended CSD so cannot
correctly detect the capacity of high-capacity cards.  As a workaround, the
capacity can be forced via the MICROPY_HW_MMCARD_LOG_BLOCK_NBR config
option.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George 88ac5a3116 stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George 0892ebe091 stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
Fixes issue #8059.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:19:20 +11:00
Damien George 5fc55999b2 stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:19:00 +11:00
Damien George 10c6f03cbe stm32/boards: Remove stray '+' characters at start of lines in ld files.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:15:25 +11:00
Damien George c613f5bb49 stm32/boards/LEGO_HUB_NO6: Set filesystem label as HUB_NO6.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-09 16:51:35 +11:00
Jim Mussared 92f54fe8d9 stm32/boards/NUCLEO_WB55: Fix LED ordering.
These were commented correctly by their colour, but in the wrong order with
respect to the PCB silkscreen.

Fixes issue #8054.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-09 14:03:35 +11:00
Damien George 23a150789d stm32/boards/make-pins.py: Use cpu pins to define static alt-fun macros.
Instead of board pins, so that pins which have only the CPU specified in
pins.csv can still be used with mp_hal_pin_config_alt_static().

Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:25:41 +11:00
Damien George 0c9f5b388e stm32: Include HAL MMC code in F4 builds.
So that the MMC driver can be used on F4 MCUs.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:21:18 +11:00
Damien George 7e61a12eb1 stm32: Add support for F479 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:21:18 +11:00
Damien George 35e70c1698 stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
Signed-off-by: Damien George <damien@micropython.org>
2021-11-29 13:20:35 +11:00
David Michieli 6259aa50eb stm32/boards/NUCLEO_WB55: Update rfcore_firmwre for new WS.
Adds a fix to behavior occuring since WS 1.11 where the FUS returns
misleading statuses during WS upgrade.
2021-11-25 23:28:58 +11:00
Frédéric Pierson d49df423e0 stm32/boards/NADHAT_PYBF405: Rename board to GARATRONIC_NADHAT_F405.
To add the manufacturer as a prefix to the board name, for consistency with
other Garatronic boards.
2021-11-25 21:10:43 +11:00
Frédéric Pierson fdb925c4c1 stm32/boards: Add PYBSTICK26 F411 board definition. 2021-11-25 21:09:57 +11:00
Damien George 90554d03c0 stm32/boards: Build NUCLEO_WB55 and STM32F769DISC without mboot enabled.
This is to make the builds for all nucleo/discovery boards uniform, so they
can be treated the same by the auto build scripts.

The CI script is updated to explicitly enable mboot and packing, to test
these features.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-22 17:12:16 +11:00
Lorenzo Cappelletti 8f0e304e65 stm32/boards: Add new board MikroElektronika Quail, and F427 support.
Quail (https://www.mikroe.com/quail, PID: MIKROE-1793) is based on an
STM32F427VI CPU, featuring 2048 kB of Flash memory and 192 kB of RAM.  An
on-board Cypress S25FL164K adds 8 MB of SPI Flash.

Quail has 4 mikroBUS(TM) sockets for Mikroe click(TM) board connectivity,
along with 24 screw terminals for connecting additional electronics and two
USB ports (one for programming, the other for external mass storage).

4 UARTs, 2 SPIs and 1 I2C bus are available for communication.

Signed-off-by: Lorenzo Cappelletti <lorenzo.cappelletti@gmail.com>
2021-11-19 16:33:13 +11:00
Lorenzo Cappelletti 16c7a80874 stm32/boards/MIKROE_CLICKER2_STM32: Add more detail to board.json.
Signed-off-by: Lorenzo Cappelletti <lorenzo.cappelletti@gmail.com>
2021-11-19 16:32:53 +11:00
MikeTeachman 6d5296e65e stm32,esp32: In machine_i2s, make object reference arrays root pointers.
This change eliminates the risk of the IRQ callback accessing invalid data.
Discussed here:
https://github.com/micropython/micropython/pull/7183#discussion_r660209875

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:22:42 +11:00
Mike Causer 590ec2ca6e stm32/boards: Add images to board.json for Adafruit and VCC_GND boards. 2021-10-28 09:52:59 +11:00
Jim Mussared e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
roland van straten 9eff4029ab stm32/boards: Add PF11-BOOT0 to stm32f091_af.csv.
PF11 is added so it can be used as GPIO.
2021-09-21 18:11:42 +10:00
Ned Konz 99bb52047c stm32/boards/NUCLEO_H743ZI: Enable VfsLfs2 on NUCLEO_H743ZI(2) boards. 2021-09-21 18:02:19 +10:00
Ned Konz 8c214ed200 stm32: Extended flash filesystem space to 512K on H743 boards.
The H743 has equal sized pages of 128k, which means the filesystem doesn't
need to be near the beginning.  This commit moves the filesystem to the
very end of flash, and extends it to 512k (4 pages).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-21 18:02:14 +10:00
Chris Fiege 6e39f2cc1e stm32/boards: Add OLIMEX H407 board definition.
This change adds the OLIMEX H407 support to the STM32 port.  The H407
(https://www.olimex.com/Products/ARM/ST/STM32-H407/) is simliar to the
already existing E407
(https://www.olimex.com/Products/ARM/ST/STM32-E407) but does not support
Ethernet and has a full-size USB-A port instead of a Mini-USB socket.

Both boards use the STM32F407ZGT6 CPU.

This port is basically a copy of the E407 but with changed pinmux:
* Removed Ethernet pin definition
* Removed UART1 (pins are used for other functions)
* Removed UART3 flow control pins (pins are used for other functions)
* Removed SD-Card detect pin (since it is not connected on the H407)

A REPL on UART3 is connected to the U3BOOT-header, a 3-pin header with RX,
TX and GND that is intended for the serial terminal.

Tested:
* Micro-SD Card is detected when inserted on RESET
* REPL on UART3 works
* Serial port on the mini USB socket

Signed-off-by: Chris Fiege <cfi@pengutronix.de>
2021-09-19 16:58:58 +10:00
Damien George c51cc46bf8 stm32/boards/make-pins.py: Allow empty lines and comments in pins.csv.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 12:53:16 +10:00
Damien George a6907c779a stm32/boards/make-pins.py: Allow a CPU pin to be hidden.
This change allows a CPU pin to be hidden from the user by prefixing it
with a "-" in the pins.csv file for a board.  It will still be available in
C code, just not exposed to Python.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 12:53:16 +10:00
Jan Staal 9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
Damien George 0a51073724 stm32/boards: Remove trailing spaces, and add newline at end of file.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-10 16:09:03 +10:00
Tobias Thyrrestrup 4c31d0ab60 stm32/boards/LEGO_HUB_NO6: Remove user paths from cc2564 init file.
Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-09-10 16:00:21 +10:00
Daniel Gorny b71c621f46 stm32/boards/OLIMEX_E407: Add Ethernet RMII support. 2021-09-10 15:52:03 +10:00
Boris Vinogradov 97bbc0bb91 stm32/boards/VCC_GND_H743VI: Add board definition for VCC_GND_H743VI. 2021-09-10 15:49:26 +10:00
Damien George 25f30eb8a6 stm32/boards/LEGO_HUB_NO6: Add comment re constraints on SPI flash cfg.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 00:03:41 +10:00
Damien George 6f19b9c08d stm32/boards/LEGO_HUB_NO6: Add make commands to backup/restore firmware.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George bac791c5fd stm32/boards/LEGO_HUB_NO6: Skip first 1MiB of SPI flash for storage.
The first 1MiB is used by the built-in bootloader and is best left as-is.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George e3eed26d0b stm32/boards/LEGO_HUB_NO6: Change SPI flash storage to use hardware SPI.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Jim Mussared b51e7e9d01 stm32: Disable computed goto on constrained boards.
Saves ~1kiB.  Add comment to this effect to mpconfig.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-20 20:18:52 +10:00
Jim Mussared e64cda5295 stm32: Add implementation of machine.bitstream.
Hand-written version for M0, and cycle-counter version for everything else.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Ned Konz a0cd18c1a5 stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI.
This commit creates a new stm32 board for the NUCLEO_H743ZI2, which is the
current version of this from ST.  This is a modified copy of the
NUCLEO_H743ZI board, and the ZI2 board differs in a few minor ways:

- LED2 has moved from PB7 to PE1 and is now yellow rather than blue
- the USB power enable has moved from PG6 to PG10
- the USER button is now pulled down
2021-08-10 23:38:05 +10:00
Damien George 3b32b3d1b3 stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:58 +10:00
Tobias Thyrrestrup 7a1edb91cb stm32/boards/LEGO_HUB_NO6: Add board definition for LEGO_HUB_NO6.
Add basic support for LEGO HUB NO.6 (e.g. LEGO SPIKE Prime, LEGO MINDSTORMS
Robot Inventor).

See README.md for details.

Thanks to @dpgeorge for helping put this together.

Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-07-31 10:25:18 +10:00
Damien George 224ac355cd stm32/boards/NUCLEO_F439ZI: Add board definition for NUCLEO_F439ZI.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-27 16:46:10 +10:00
Matúš Olekšák 0f0006f4e1 stm32/boards/STM32F429DISC: Set correct UART2 pins and add UART3/6. 2021-07-26 14:38:39 +10:00
Damien George fef2114404 stm32/uart: Fix LPUART1 baudrate set/get.
It needs to use a different function because the formula to compute the
baudrate on LPUART1 is different to a normal UART.

Fixes issue #7466.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-26 13:53:50 +10:00
Chris Wilson aecb697c72 stm32/boards: Add support for SparkFun STM32 MicroMod Processor board.
Signed-off-by: Chris Wilson <christopher.david.wilson@gmail.com>
2021-07-23 22:03:16 +10:00
Sashkoiv 753b08cae6 stm32/boards/NUCLEO_F446RE: Enable CAN bus support. 2021-07-23 00:06:13 +10:00
Damien George 831cc4a61d stm32/boards/NUCLEO_F446RE: Fix I2C1 pin assignment to match datasheet.
Thanks to @aureliano2nd.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-13 15:25:27 +10:00
Mike Teachman 8a5bfe44a5 esp32,stm32: Add new machine.I2S class for I2S protocol support.
This commit adds I2S protocol support for the esp32 and stm32 ports, via
a new machine.I2S class.  It builds on the stm32 work of blmorris, #1361.

Features include:
- a consistent I2S API across the esp32 and stm32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- documentation for Pyboards and esp32-based boards
- tested on the following development boards:
  - Pyboard D SF2W
  - Pyboard V1.1
  - ESP32 with SPIRAM
  - ESP32

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-07-05 23:42:25 +10:00
Damien George 86ef965352 stm32/adc: Simplify and generalise how pin_adcX table is defined.
The ADC_FIRST_GPIO_CHANNEL and ADC_LAST_GPIO_CHANNEL macros are no longer
needed.  Instead the pin_adcX table (X = 1, 2, 3) is now generated to be
the exact size needed for a given MCU, and MP_ARRAY_SIZE(pin_adcX) is used
to determine the upper bound.

This commit also allows CPU pins to be excluded from ADC configuration if
they are hidden by prefixing their name with a "-".

Signed-off-by: Damien George <damien@micropython.org>
2021-07-05 16:03:11 +10:00
Damien George cf849d84b9 stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards.
Because these boards use the SPI flash cache in their bdev.c configuration.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:17 +10:00
Damien George 211c3e41f1 stm32/boards/PYBD_SF2: Disable GCC 11 warnings for array bounds.
With GCC 11 there is now a warning about array bounds of OTP-mac, due to
the OTP being a literal address.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-27 23:57:51 +10:00
Damien George 62f75376dd stm32/boards/NUCLEO_L432KC: Fix FS size and enable LFS1 filesystem.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-27 12:18:41 +10:00
Mike Causer 47b778332a all: Replace busses with buses.
"buses" is the widely accepted plural form of "bus".
2021-05-20 23:22:03 +10:00
Mike Causer 1ca66efbf7 stm32/boards: Add VCC_GND_F407ZG board. 2021-05-20 23:17:51 +10:00
Mike Causer c24003abec stm32/boards: Add VCC_GND_F407VE board. 2021-05-20 23:15:56 +10:00
David Lechner ca0c75f504 stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs.
In the STM32 HAL libraries, the default value for LSI_VALUE for F4 MCUs is
32 kHz.

Signed-off-by: David Lechner <david@pybricks.com>
2021-05-04 16:53:40 +10:00
iabdalkader baa712b7f0 stm32/boards/PYBD_SF2: Enable RF switch compile option. 2021-04-30 10:16:15 +10:00
Damien George cf7e71fa43 stm32/sdcard: Allow configuring the SDMMC periph used for SD/MMC card.
This can now be selected by setting MICROPY_HW_SDCARD_SDMMC, which defaults
to 1, ie SDMMC1.  This commit also renames the SD pin configuration macros
from MICROPY_HW_SDMMC2_xxx to MICROPY_HW_SDCARD_xxx, as well as renaming
MICROPY_HW_SDMMC_BUS_WIDTH to MICROPY_HW_SDCARD_BUS_WIDTH.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:58:17 +10:00
Damien George 6e0f9b9262 stm32/boards/pllvalues.py: Support wider range of PLL values for F413.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-20 23:33:33 +10:00
Damien George 25c029ce9f stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
So these alternate functions can be parsed by the build scripts and used in
application code.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-13 23:58:20 +10:00
aziubin 7546d3cf73 stm32/boards/NUCLEO_L476RG: Add 5 remaining UARTs.
STM32L476RG MCU of NUCLEO_L476RG board has 6 UART/USART units in total
(USART1, USART2, USART3, UART4, UART5 and LPUART1), but only UART2,
connected to REPL, was defined and available in Python code.
Defined are all 5 remaining UART/USART units including LPUART1.

Signed-off-by: Alexander Ziubin aziubin@googlemail.com
2021-04-09 15:00:55 +10:00
Damien George cb396827f5 stm32/boards/pllvalues.py: Relax PLLQ constraints on STM32F413 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George 25ae169e6e stm32: Include .ARM section in firmware for C++ exception handling.
Support for C++ was added in 97960dc7de but
that commit didn't include the C++ exception handling table in the binary
firmware image.  This commit fixes that.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:11:15 +10:00
Damien George 03a64f2077 stm32/boards/NUCLEO_WB55: Enable LPUART1 on PA2/PA3.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-21 15:49:33 +11:00
Chris Mason 9d674cf7ab stm32/uart: Add support for LPUART1 on L0, L4, H7 and WB MCUs.
Add LPUART1 as a standard UART.  No low power features are supported, yet.
LPUART1 is enabled as the next available UART after the standard U(S)ARTs:

    STM32WB:      LPUART1 = UART(2)
    STM32L0:      LPUART1 = UART(6)
    STM32L4:      LPUART1 = UART(6)
    STM32H7:      LPUART1 = UART(9)

On all ports: LPUART1 = machine.UART('LP1')

LPUART1 is enabled by defining MICROPY_HW_LPUART1_TX and
MICROPY_HW_LPUART1_RX in mpconfigboard.h.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2021-02-21 15:49:32 +11:00
Damien George 301fe805ca stm32/mpbtstackport: Allow chipset and secondary baudrate to be set.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-17 15:47:17 +11:00
Damien George 5c92ff53fe stm32/boards: Disable onewire module on boards with small flash.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-17 14:42:46 +11:00
Damien George d2a34c62e7 stm32/uart: Add uart_set_baudrate function.
This allows changing the baudrate of the UART without reinitialising it
(reinitialising can lead to spurious characters sent on the TX line).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-14 18:30:49 +11:00
Damien George 0efa0b5437 stm32/mboot: Add ELEM_TYPE_STATUS element so application can get status.
This new element takes the form: (ELEM_TYPE_STATUS, 4, <address>).  If this
element is present in the mboot command then mboot will store to the given
address the result of the filesystem firmware update process.  The address
can for example be an RTC backup register.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Damien George f6e6ef69e0 stm32/boards/NUCLEO_WB55: Enable MBOOT with packing mode.
To have at least one board configured with MBOOT_ENABLE_PACKING, for CI
testing purposes and demonstration of the feature.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Damien George e715a8fb9b stm32/boards/PYBD_SF2: Disable SPIFLASH_ENABLE_CACHE for mboot builds.
Mboot builds do not use the external SPI flash in caching mode, and
explicitly disabling it saves RAM and a small bit of flash.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:39:32 +11:00
Damien George e43a74a4db drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.
This only needs to be enabled if a board uses FAT FS on external SPI flash.
When disabled (and using external SPI flash) 4k of RAM can be saved.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:39:32 +11:00
Damien George 80883a82c0 stm32/adc: Deselect VBAT after reading to prevent battery drain.
Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:32:02 +11:00
Reinhard Feger 032e095620 stm32/boards/NUCLEO_H743ZI: Enable ethernet peripheral. 2020-12-08 15:27:51 +11:00
Reinhard Feger cd61fc8e44 stm32/boards/stm32h743.ld: Enable D2 RAM and add eth-buffer section. 2020-12-08 15:27:27 +11:00
Damien George cc2a35b7b2 stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.
Devices with RTC backup-batteries have been shown (very rarely) to have
incorrect RTC prescaler values.  Such incorrect values mean the RTC counts
fast or slow, and will be wrong forever if the power/backup-battery is
always present.

This commit detects such a state at start up (hard reset) and corrects it
by reconfiguring the RTC prescaler values.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-13 11:23:52 +11:00
Damien George 97960dc7de stm32: Support C++ code and user C modules written in C++.
Also build user C modules as part of the stm32 CI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:35:36 +11:00
Damien George df3b466d6c stm32/boards: Factor out common data/bss/heap/stack linker sections.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:31:59 +11:00
Damien George 0118c07916 stm32/machine_adc: Fix ADC auto-calibration to run when ADC not enabled.
Prior to this commit, the ADC calibration code was never executing because
ADVREGEN bit was set making the CR register always non-zero.

This commit changes the logic so that ADC calibration is always run when
the ADC is disabled and an ADC channel is initialised.  It also uses the LL
API functions to do the calibration, to make sure it is done correctly on
each MCU variant.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 11:09:43 +11:00
Jim Mussared 893f75546c stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Increase GET_STATE timeout.
When installing WS firmware, the very first GET_STATE can take several
seconds to respond (especially with the larger binaries like
BLE_stack_full).

Allows stm.rfcore_sys_hci to take an optional timeout, defaulting to
SYS_ACK_TIMEOUT_MS (which is 250ms).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:45:03 +11:00
Jim Mussared dfb63b5613 stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix bad variable name.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:44:58 +11:00
Jim Mussared 520bb88d70 stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix flash unlock.
The flash can sometimes be in an already-unlocked state, and attempting to
unlock it again will cause an immediate reset.  So make _Flash.unlock()
check FLASH_CR_LOCK to get the current state.

Also fix some magic numbers for FLASH_CR_LOCK AND FLASH_CR_STRT.

The machine.reset() could be removed because it no longer crashes now that
the flash unlock is fixed.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:43:36 +11:00
Jim Mussared 222ec1a4a8 stm32/boards/NUCLEO_WB55: Add standalone WB55 FUS/WS firmware updater.
This commit adds a script that can be run on-device to install FUS and WS
binaries from the filesystem.  Instructions for use are provided in
the rfcore_firmware.py file.

The commit also removes unneeded functionality from the existing rfcore.py
debug script (and renames it rfcore_debug.py).
2020-10-08 17:39:15 +11:00
Damien George 3e16763201 stm32/rfcore: Fix FUS layout and size of ipcc_device_info_table_t.
The device info table has a different layout when core 2 is in FUS mode.
In particular it's larger than the 32 bytes used when in WS mode and if the
correct amount of space is not allocated then the end of the table may be
overwritten with other data (eg with FUS version 0.5.3).  So update the
structure to fix this.

Also update rfcore.py to disable IRQs (which are enabled by rfcore.c), to
not depend on uctypes, and to not require the asm_thumb emitter.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-22 14:08:22 +10:00
Jim Mussared 632e3b7acc stm32/boards/NUCLEO_WB55: Add Python helper code for rfcore.
This allows prototyping rfcore.c improvements from Python.

This was mostly written by @dpgeorge with small modifications to work after
rfcore_init() by @jimmo.
2020-09-08 23:54:02 +10:00
Jim Mussared 9c9cc7a02f stm32/boards/USBDONGLE_WB55: Add USE_MBOOT support. 2020-09-08 23:53:12 +10:00
Jim Mussared 30e8162ac4 stm32/rfcore: Update rfcore.c to match how ST examples work.
- Split tables and buffers into SRAM2A/2B.
- Use structs rather than word offsets to access tables.
- Use FLASH_IPCCDBA register value rather than option bytes directly.
2020-09-08 23:53:02 +10:00
Damien George 06659077a8 all: Update Python code to conform to latest black formatting.
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 15:18:01 +10:00
Damien George 67fd58bbd2 stm32/mboot: Add support for littlefs.
Mboot now supports FAT, LFS1 and LFS2 filesystems, to load firmware from.
The filesystem needed by the board must be explicitly enabled by the
configuration variables MBOOT_VFS_FAT, MBOOT_VFS_LFS1 and MBOOT_VFS_LFS2.
Boards that previously used FAT implicitly (with MBOOT_FSLOAD enabled) must
now add the following config to mpconfigboard.h:

    #define MBOOT_VFS_FAT (1)

Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:17:02 +10:00