Commit Graph

337 Commits

Author SHA1 Message Date
brave ulysses 7f71057a89 stm32/boards/NUCLEO_F756ZG: Add board definition for NUCLEO-F756ZG.
Signed-off-by: Damien George <damien@micropython.org>
2022-12-15 14:59:26 +11:00
Dale Weber f2de289ef3 stm32/boards/NUCLEO_F429ZI: Enable I2C1 and I2C2 with default pins.
The datasheet on page 55 shows PF0 (SDA) and PF1 (SCL) are the pins for
I2C2, but these pins do not work.  Checking the MBED pinout for the
NUCLEO-F429ZI shows:

    I2C1: PB8 (SCL) and PB9 (SDA).
    I2C2: PB10 (SCL) and PB11 (SDA).

Both of these work and can be scanned and find devices connected to them.

Signed-off-by: Dale Weber <hybotics.sd@gmail.com>.
2022-12-13 17:35:55 +11:00
iabdalkader fb7d211530 stm32/boards: Add missing LPUART macros for H7 HAL.
The STM32H7xx HAL LPUART AF macros are missing the number, this HAL is the
only one that's inconsistent in the way it defines LPUART AF macros, so we
only need to define them for H7.
2022-12-01 15:35:07 +11:00
Damien George 771c16f3d9 stm32/mboot: Make all mboot sectors erase/write protected.
Prior to this commit, only sector 0 was erase/write protected, which may
not be enough to protect all of mboot (especially if mboot lives at a
higher address than the start of flash).

This commit makes sure all internal flash sectors that mboot lives in are
protected from erasing and writing.  The linker script must define
_mboot_writable_flash_start for this to work.

Signed-off-by: Damien George <damien@micropython.org>
2022-11-30 17:19:36 +11:00
iabdalkader 8ddb4567ff stm32/boards/ARDUINO_PORTENTA_H7: Add more modules, I2C1 and SE pin.
Changes in this commit are:
- Increase CDC buffer size.
- Define I2C1 SCL/SDA pins.
- Add crypto device enable pin to board pins.
- Update deploy instructions.
- Add ntptime, urequests and logging to manifest.
2022-11-14 18:59:17 +11:00
iabdalkader ebb1a4ecb0 stm32/boards/ARDUINO_PORTENTA_H7: Add custom mbedtls config. 2022-11-08 23:46:06 +11:00
Jim Mussared 5ee1cb2771 stm32/boards/ARDUINO_PORTENTA_H7: Revert to single-precision float.
Using repr C is incompatible with double-precision floats on 32-bit arch.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-25 14:46:04 +11:00
yn386 e6d3513187 stm32/boards/NUCLEO_L152RE: Add NUCLEO-L152RE board support.
This change adds NUCLEO-L152RE support to the STM32 port.
NUCLEO-L152RE: https://www.st.com/en/evaluation-tools/nucleo-l152re.html
This board use STM32L152RE:
https://www.st.com/en/microcontrollers-microprocessors/stm32l152re.html
2022-09-25 23:56:41 +10:00
yn386 427d72667f stm32: Add support for STM32L1 MCUs.
This change adds STM32L1 support to the STM32 port.
2022-09-25 23:56:41 +10:00
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 6e75d177e7 stm32/boards/PYB: Fix handling of BOARD_VARIANT selection.
The matches should not have been quoted.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:54:48 +10:00
Jim Mussared d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
yn386 719dbbf563 stm32/boards: Add alternate function list for STM32F446RE.
Signed-off-by: Damien George <damien@micropython.org>
2022-09-06 16:55:24 +10:00
Damien George 4e4c28bf27 stm32/boards: Only freeze LCD160CR driver in PYB board firmware.
Although this driver and associated hardware can be used on any board, it
makes to only freeze it for PYB and PYBD boards.  It can be easily copied
to any board if needed.

Fixes issue #8056.

Signed-off-by: Damien George <damien@micropython.org>
2022-09-06 12:53:46 +10:00
Jim Mussared fb20dbe4d1 stm32/boards/LEGO_HUB_NO6: Update manifest to new format.
This was added after 203dae41f and missed in the rebase.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-06 10:57:33 +10:00
Jim Mussared 203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
Damien George 1855df6361 stm32: Remove support for CC3000 WiFi driver.
It has been about 8 years since support for this chip was added.  Reasons
to remove it are:
- It is no longer easy to obtain this part.
- There are now many other options for WiFi.
- It's not a good use of developer time to maintain it.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 12:51:37 +10:00
Jim Mussared 492ba5eaf2 stm32: Move board variant config to mpconfigboard.mk.
Rather than having the autobuild know about the particular variants, have
the mpconfigboard.mk describe them and make autobuild discover them
automatically.

Adds a "query-variants" target to stm32/Makefile to allow the set of
possible variants to be queried.

Removes pybv3 from the autobuild as this isn't use by the downloads page.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 09:38:38 +10:00
Andrew Leech 923375380b stm32/boards: Increase mboot region to 32k for WB55 boards.
If mboot is built with support for packing (signing/encryption) it needs up
to 32KiB.  So for simplicity increase the mboot region to 32KiB
unconditionally for WB55 boards (custom WB55 board configurations can still
provide their own linker scripts to override this).
2022-08-25 17:02:56 +10:00
Damien George 8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Andrew Leech 6804b6f54f stm32/boards/NUCLEO_WB55: Add error handling to firmware update scripts.
In-the-field use of these FUS/WS firmware update scripts has exposed some
weak points, causing corrupted FUS/WS firmware to be flashed to the unit.

The problems are mostly caused with the ST GUI application, but sometimes
from un-recognised failures during bin file transfer to the WB55 prior to
running the rfcore_firmware.py script.  Other failures were caused by
incorrect load addresses being used, again both from user error copying the
address from the HTML release notes to the GUI tool, but also from
similarly not updating the address correctly in rfcore_firmware.py

To guard against these errors and make it easier to prepare different
versions, this commit adds a few features to the rfcore firmware update
tools:
- When creating the bin file, automatically parse the release note in the
  folder to get the correct address.
- Add a footer to the bin file containing the name, version, CRC, address
  etc.
- Before flashing rfcore, check if the same version is already installed.
- Verify the CRC and obfuscation key before flashing bin.
- Log the name and version of file being flashed.
2022-08-08 23:42:20 +10:00
David Lechner 10f85fee18 stm32/boards/LEGO_HUB_NO7: Add LEGO Hub No. 7 board definition.
This adds support for the LEGO Hub No. 7, aka LEGO Technic Small hub, aka
LEGO SPIKE Essential hub.  This board is largely similar to Hub No. 6:

- Same MCU (STM32F413 - different packaging with fewer pins).
- Same Bluetooth chip (TI CC2564).
- Same IMU chip.
- Similar external flash chip - 4MiB instead of 32MiB.
- 2 I/O ports instead of 6.
- No display - only status and battery LEDs.
- Different LED driver chip.
- Only 1 button which is also the power button.
- No speaker.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:31 +10:00
David Lechner 0f0f2351bb stm32/boards/LEGO_HUB_NO6/cc2564: Make timer configurable.
This adds configurable macros to define the timer and channel used to
provide the Bluetooth 32768 MHz clock.  This will allow code to be shared
with LEGO_HUB_NO7.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:28 +10:00
David Lechner f69af16619 stm32/boards/LEGO_HUB_NO6/spiflash: Pick command type at runtime.
This changes spiflash.py to read the flash chip ID at runtime to select the
read/write/erase commands.  This will allow the code to be shared with
LEGO_HUB_NO7 which doesn't use the 32-bit commands.

Also remove an unused constant while we are touching this.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:24 +10:00
David Lechner 9a51273d96 stm32/boards/LEGO_HUB_NO6/appupdate: Detect filesystem size at runtime.
This changes appupdate.py to get the filesystem size at runtime.  This will
allow the code to be shared with LEGO_HUB_NO7 which has a similar flash
chip with a different size.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-06 00:01:10 +10:00
David Lechner 7cc6df3303 stm32/boards/LEGO_HUB_NO6: Use named pins.
This changes all uses of pins to use the alias names of the pins.  This
makes the code easier to understand and will also allow sharing more code
with LEGO_HUB_NO7.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-05 23:57:35 +10:00
David Lechner 6152bbe3dd stm32/boards/LEGO_HUB_NO6: Fix typo in README.
This fixes a typo in the build directory path.

Signed-off-by: David Lechner <david@pybricks.com>
2022-08-05 23:57:15 +10:00
Angus Gratton dd77dbd4f7 stm32/boards: Enable LTO by default on boards with smaller flash size.
Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:32:39 +10:00
Angus Gratton 2c015375d1 stm32: Use a separate symbol name for the bootloader state pointer.
Prerequisite for enabling Link Time Optimisation.

The _bl_state address is the same as _estack, but _estack is referred to as
a uint32_t elsewhere in the code. LTO doesn't like it when the same symbol
has two different types.

Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:25:08 +10:00
chrismas9 868f23b362 stm32/boards/NUCLEO_F091RC: Enable LFS1 filesystem.
And disable some less common features to make space for it.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:41 +10:00
chrismas9 fdbca3c143 stm32/boards/stm32f091xc.ld: Allocate space for a small filesystem.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:32 +10:00
iabdalkader 0adf0dd3d7 stm32/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:36:55 +10:00
Damien George 3452ee58d3 stm32/boards/LEGO_HUB_NO6: Add comment to readme about powering off.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Damien George 340872cfdd stm32/boards/LEGO_HUB_NO6: Add helper scripts to update app firmware.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 15:22:16 +10:00
Damien George 87ca431f3f stm32/boards/LEGO_HUB_NO6: Implement robust filesystem-load updates.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George d84ebc31f7 stm32/boards/LEGO_HUB_NO6: Use multi-colour LED for mboot status.
This gives more information to the user when doing updates from SPI flash.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George fae9205594 stm32/boards/LEGO_HUB_NO6: Add support for mboot to access SPI flash.
The following changes are made:
- Use software SPI for external SPI flash access when building mboot.
- Enable the mboot filesystem-loading feature, with FAT FS support.
- Increase the frequency of the CPU when in mboot to 96MHz, to increase the
  speed of SPI flash accesses and programming.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 36211baf0e stm32/boards/LEGO_HUB_NO6: Make all SPI flash transfers use 32-bit addr.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 87fbceef26 stm32/mboot: Pass initial_r0 to early-init and get-reset-mode funcs.
This allows a board to modify initial_r0 if needed.

Also make default board behaviour functions always available, named as
mboot_get_reset_mode_default and mboot_state_change_default.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 5b700b0af9 all: Reformat remaining C code that doesn't have a space after a comma.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 13:30:40 +10:00
Asensio Lorenzo Sempere 9d08eb0247 stm32/boards/NUCLEO_G0B1RE: Add NUCLEO_G0B1RE board definition.
This commit adds a board definition for NUCLEO_G0B1RE. This board has the
REPL on UART2 which is connected to the on-board ST-link USB-UART.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Asensio Lorenzo Sempere 010012c7c3 stm32: Add support for G0 MCUs.
This commit adds support for the STM32G0 series of MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
iabdalkader 96ad86ed2b stm32/boards/ARDUINO_PORTENTA_H7: Add support for Arduino Portenta H7. 2022-04-28 10:42:47 +10:00
Damien George 5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Damien George 707aaa350a stm32/boards/LEGO_HUB_NO6: Exclude BTstack code from formatting.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 15:54:26 +10:00
iabdalkader 03c61916bc stm32/boards/ADAFRUIT_F405_EXPRESS: Use external SPI flash for storage.
Fixes issue #8553.
2022-04-20 15:37:14 +10:00
Chris Wilson b50fe9a6da stm32/boards/SPARKFUN_MICROMOD_STM32: Fix incorrect UART and I2C config.
Based on testing with real hardware.
2022-04-19 10:42:37 +10:00
Dave Hylands 9d7c168bf5 stm32/boards/PYBD_SFx: Allow FROZEN_MANIFEST to be overridden.
Because mpconfigboard.mk used = rather then ?= it doesn't allow
FROZEN_MANIFEST to be overridden using a GNUmakefile or the manifest.
2022-04-11 16:19:45 +10:00
iabdalkader 36cac5e154 stm32/system_stm32: Allow boards to configure PLL VCI, VCO and FRACN.
This removes hard-coded PLL1/3 VCI, VCO and FRACN.
2022-04-11 16:12:53 +10:00
iabdalkader bdbc9b395f stm32/system_stm32: Add H7 switched-mode-power-supply support.
- Add board-level configuration option to set the SMPS supply mode.
- Wait for valid voltage levels after configuring the SMPS mode.
- Wait for external supply ready flag if SMPS supplies external circuitry.
2022-04-11 16:12:53 +10:00