Benjamin Shockley
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
Benjamin Shockley
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
Benjamin Shockley
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
Scott Shawcroft
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
Dan Halbert
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
Scott Shawcroft
8161178415
Merge pull request #1275 from ElectronicCats/board-meowmeow
...
Added board Meow Meow by Electronic Cats
2018-10-17 11:41:57 -07:00
Scott Shawcroft
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
Scott Shawcroft
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
Paul Sajna
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
Scott Shawcroft
c69b67f453
Merge pull request #1277 from dhalbert/nrf-pulseout
...
PulseOut working
2018-10-16 10:19:55 -07:00
Dan Halbert
b3c7746a7f
fix copyright notice
2018-10-16 11:09:37 -04:00
Dan Halbert
2262efc311
PulseOut working
2018-10-16 11:05:02 -04:00
Nick Moore
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
sabas1080
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
Paul Sajna
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
Paul Sajna
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
Dan Halbert
8b531f3fba
Merge pull request #1263 from tannewt/trellis_m4_revD
...
Support rev D for the Trellis M4 Express
2018-10-10 23:34:59 -04:00
Nick Moore
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
Nick Moore
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
Scott Shawcroft
e5d2fae801
Merge pull request #1261 from jepler/esp8266-prebuilt-sdk
...
esp8266/README: comment on the specific binary SDK used
2018-10-10 12:03:12 -07:00
Scott Shawcroft
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
Dan Halbert
8d58093328
Merge pull request #1259 from dhalbert/nrf-pwmout
...
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-10 12:27:27 -04:00
Scott Shawcroft
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
Dan Halbert
ca737e6f7c
Don't disable tempoarily in deinit().
2018-10-09 21:23:47 -04:00
Jeff Epler
012cc466a4
esp8266/README: comment on the specific binary SDK used
2018-10-09 20:17:38 -05:00
Dan Halbert
91a88cf568
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-09 20:52:55 -04:00
ATMakersBill
9f94712ad1
replacing change to input() with separate method to check for USB Serial input
2018-10-09 18:37:52 -04:00
Scott Shawcroft
a647ab83df
Merge remote-tracking branch 'adafruit/master' into mixer
2018-10-09 13:31:17 -07:00
Nick Moore
a60700b1c5
Get DHCP working ...
2018-10-09 16:28:30 +11:00
Nick Moore
6e624b9c6a
Split wiznet.WIZNET5K off into its own file
2018-10-09 13:05:58 +11:00
Jerry Needell
fd0ea85549
add force_create to nrf filesystem_init()
2018-10-06 08:03:27 -04:00
Scott Shawcroft
2b0356c61f
Disable framebuf by default on express builds.
2018-10-05 15:19:09 -07:00
Scott Shawcroft
76008ce304
Introduce audioio.Mixer which can mix multiple audio samples
...
to produce a single sample.
Only works with 16 bit samples on the M4.
Fixes #987
2018-10-05 15:12:23 -07:00
hathach
21ddb6b9b9
fix tinyusb cdc issue
2018-10-05 21:37:16 +07:00
Benjamin Shockley
091c5106ef
Cleanup Files
2018-10-04 21:26:28 -05:00
Benjamin Shockley
62d316bffb
W25Q16JV IQ and IM
...
Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.
2018-10-04 21:26:05 -05:00
Benjamin Shockley
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
Benjamin Shockley
f6b9f101dc
Added W25Q16JV_IM
...
Added new flash module: W25Q16JV_IM
2018-10-04 21:13:05 -05:00
Nick Moore
15b59bee1b
change initialization method + mod_network names
2018-10-04 22:31:47 +10:00
Nick Moore
f9bda0ff93
Makefile & mpconfigport for atmel-samd with wiznet
2018-10-04 22:02:25 +10:00
Dan Halbert
6049776b26
Merge branch 'master' into nrf52_uart_io
2018-10-03 13:31:48 -04:00
Scott Shawcroft
86ae707b08
Merge pull request #1223 from dhalbert/spi-baudrate
...
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
2018-10-03 10:11:44 -07:00
hathach
b8884ccc8b
Merge branch 'master' into nrf52_uart_io
2018-10-03 23:13:56 +07:00
Dan Halbert
d79b0a6b17
Merge pull request #1232 from platipo/master
...
Fix 'advertisement' typo
2018-10-03 09:14:28 -04:00
Enrico Paganin
4b9099358f
Fix 'advertisement' typo
2018-10-03 09:56:30 +02:00
hathach
08cbb03bdd
implement common_hal_busio_uart_clear_rx_buffer
2018-10-03 11:39:01 +07:00
hathach
f543c8415d
"busio.UART not yet implemented -> not available
2018-10-03 11:30:31 +07:00
Dan Halbert
21d331c8cc
round SPI freq down; check max freq
2018-10-02 21:06:40 -04:00
Dan Halbert
036a1490e3
Merge pull request #1227 from tannewt/trellis_m4
...
Update Trellis M4 Express for Rev C
2018-10-02 20:33:27 -04:00
Scott Shawcroft
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
Dan Halbert
aa95526428
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
2018-10-01 18:54:13 -04:00
Benjamin Shockley
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
Benjamin Shockley
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
Benjamin Shockley
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
Benjamin Shockley
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
Benjamin Shockley
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
Benjamin Shockley
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
Dan Halbert
48a3aafdd2
reset I2C and SPI on ctrl-D
2018-09-25 15:12:10 -04:00
hathach
76d6fb03f0
more clean up
2018-09-26 02:12:06 +07:00
hathach
eba80f7a99
update translate string
2018-09-26 02:10:44 +07:00
hathach
52328c88cd
remove space
2018-09-26 02:06:32 +07:00
hathach
74cc55b107
change error type to runtime
2018-09-25 17:31:53 +07:00
hathach
f724647a45
fix feather nrf52840 build error
2018-09-25 17:09:54 +07:00
hathach
dec5c50c45
clean up
2018-09-25 16:22:14 +07:00
hathach
2f0e0bdcaf
migrate serial from uart to uarte
2018-09-25 16:14:44 +07:00
hathach
9017c9d29a
clean up
2018-09-25 14:29:45 +07:00
hathach
d3e5ba83eb
update nrfx to 1.3.0
2018-09-25 13:00:57 +07:00
hathach
d714479924
clean up
2018-09-25 12:48:48 +07:00
hathach
01c1296197
nrf52 uart io rx work reliably
2018-09-25 12:37:31 +07:00
hathach
1782ceab35
uarte malloc if buffer is not in SRAM
2018-09-24 16:18:49 +07:00
hathach
4015023e01
clean up uart io
2018-09-24 16:12:05 +07:00
hathach
7bbd449f06
uarte rx work fine
2018-09-24 15:54:32 +07:00
hathach
fdd3e91753
changing to nrf uarte, tx works fine
2018-09-24 14:56:52 +07:00
hathach
7a1b4ccc9b
Merge branch 'master' into nrf52_uart_io
2018-09-24 12:50:48 +07:00
Scott Shawcroft
f2c960e89b
Merge pull request #1205 from hathach/nrf52_autoreload
...
add autoreload for nrf52
2018-09-21 16:48:21 -04:00
hathach
e1fe7e71a1
add autoreload
2018-09-22 02:08:00 +07:00
Scott Shawcroft
a9d094ab74
Fix translations
2018-09-21 12:24:04 -04:00
Scott Shawcroft
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x
2018-09-21 12:22:26 -04:00
Dan Halbert
2c15d12f2f
allow multiple I2C and SPI; improve nrfx_config.h
2018-09-20 20:45:30 -04:00
hathach
816ff05253
clean up
2018-09-21 03:53:35 +07:00
hathach
dddc437ea7
got rx working finally
2018-09-21 03:48:13 +07:00
hathach
fe1a297889
still have issue with initial uart rx
2018-09-21 01:27:52 +07:00
Dan Halbert
2309e60c0d
WIP; problem with staticly allocated IRQ handlers
2018-09-19 21:59:04 -04:00
hathach
9c25306877
uart rx got some issue with irq
2018-09-20 02:12:21 +07:00
Scott Shawcroft
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
hathach
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
hathach
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
Dan Halbert
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
Scott Shawcroft
655f223916
Clock the SAMD21 much faster so it can actually convert at its max
...
sample rate of 350ksps.
Also added an error check of sample rate.
Fixes #1196
2018-09-18 15:29:46 -07:00
Dan Halbert
56b7f3ba64
fix translate omission; pca10059 fix in .travis.yml
2018-09-18 16:28:27 -04:00
Dan Halbert
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
hathach
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
Dan Halbert
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
Pierrick C
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
ladyada
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
ladyada
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
ladyada
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
ladyada
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
Pierrick C
7e8816ad6f
Add VOLTAGE_MONITOR alias to pin D31/A7
2018-09-13 23:46:47 +02:00
Pierrick C
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
Scott Shawcroft
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements
...
UART enhancements
2018-09-12 16:23:28 -07:00
Dan Halbert
6a72084198
fix nrf builds; sphinx 1.8.0 crashing: use lower version
2018-09-12 18:37:03 -04:00
Scott Shawcroft
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk.
...
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.
Fixes #1182
2018-09-12 15:25:59 -07:00
Dan Halbert
6a046f55c4
UART fixes and enhancements; default board object fix
2018-09-12 17:19:43 -04:00
Dan Halbert
2bd7040fe0
usb_write() output_len was uint8_t instead of uint32_t
2018-09-12 17:16:52 -04:00
Paul Kierstead
02b3f62460
When UART timeout of zero is given, make read() return data already available
2018-09-12 13:25:49 -04:00
Benjamin Shockley
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
Dan Halbert
c3918bae57
PWMOut was not claming channels on shared TCCs
2018-09-11 19:46:47 -04:00
Benjamin Shockley
2138b04e45
Update to IS25LP016D
...
Changed .supports_qspi_write to true.
2018-09-11 07:52:23 -05:00
Benjamin Shockley
c7cf38186d
Added IS25LP016D
2018-09-10 14:55:18 -05:00
Benjamin Shockley
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
Benjamin Shockley
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
Benjamin Shockley
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
Dan Halbert
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
Dan Halbert
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
Scott Shawcroft
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
Scott Shawcroft
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
Scott Shawcroft
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
Scott Shawcroft
1683eb913d
Minor tweaks based on feedback
2018-09-06 14:49:49 -07:00
Dan Halbert
100603a60b
neopixel_write merge; alphabetize stuff in Makefile
2018-09-05 17:38:59 -04:00
Dan Halbert
4c3b4cacfa
Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming
2018-09-05 13:15:22 -04:00
Dan Halbert
a0872e8761
Merge pull request #1161 from hathach/nrf52_neopixel
...
Nrf52 neopixel
2018-09-05 08:09:07 -04:00
hathach
ccd87a33b6
use nrf_pwm instead of direct registers
2018-09-05 13:18:36 +07:00
Dan Halbert
b5c03a7085
generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t
2018-09-04 16:43:21 -04:00
hathach
f4a98e909c
fix nrf52832 build 2
2018-09-04 23:25:08 +07:00
hathach
b9e8e3cd1f
fix nrf52832 build
2018-09-04 20:54:36 +07:00
hathach
1fe3ed87eb
run background job while waiting for neopixel write seqend
2018-09-04 19:24:45 +07:00
hathach
0d92c65829
correct disconnection check to only dtr
2018-09-04 18:36:08 +07:00
hathach
3ae24d9f9a
add neopixel_write implementation, work ok
2018-09-04 18:33:08 +07:00
hathach
e17253071e
adding neopixel write
2018-09-04 15:51:49 +07:00
Paul Kierstead
2d3f1a10bf
When UART timeout of zero is given, make read() return data already available
2018-09-01 17:07:30 +00:00
Dan Halbert
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
Dan Halbert
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
Dan Halbert
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
Dan Halbert
0e8d146184
wip
2018-08-31 18:05:55 -04:00
Scott Shawcroft
121903b6ee
Tweaks based on feedback
2018-08-31 14:21:48 -07:00
Scott Shawcroft
6697544cdf
Introduce displayio to render graphics to displays.
...
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.
This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
2018-08-31 12:31:52 -07:00
Dan Halbert
93100a7517
Merge pull request #1146 from hathach/nrf52_usb_serial_bug
...
update tinyusb to fix #1007 serial issue
2018-08-28 15:39:34 -04:00
hathach
87811ec3a0
update readme board name feather_nrf52832
2018-08-28 16:15:20 +07:00
Scott Shawcroft
569a050e82
Merge pull request #1143 from notro/stat_epoch_fix
...
Fix os.stat() epoch and use RTC for file timestamp
2018-08-26 22:22:45 -07:00
ladyada
ded38d30b6
rename pin.h to nrf_pin.h to avoid conflict with Pin.h
2018-08-26 20:37:12 -04:00
Noralf Trønnes
b61cf8d81f
samd: Use RTC to set file timestamp
...
Use RTC to set file timestamp for file operations done on the board.
2018-08-25 20:43:09 +02:00
Jerry Needell
e8b94d0024
adjust SAMD51 neopixel_write timing
2018-08-24 07:01:50 -04:00
Dan Halbert
4cc33f8de6
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
2018-08-23 16:25:57 -04:00
Dan Halbert
728622f09d
Merge pull request #1139 from hathach/nrf52_usb_serial
...
use unique DevicID for usb serial
2018-08-23 09:30:31 -04:00
hathach
4a8cd03de1
use unique DevicID for usb serial
2018-08-23 14:00:54 +07:00
hathach
fed1960424
remove s140 6.0.0 and s132 6.1.0 (not supported yet)
2018-08-23 00:27:39 +07:00
hathach
0c0ac06fc7
add SD 6.1.0 to download all
2018-08-22 23:09:09 +07:00
hathach
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
Dan Halbert
05ea9fd296
remove stray underscore
2018-08-22 10:26:52 -04:00
Dan Halbert
eaf4d19dbb
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
...
Merge #1137
2018-08-22 10:24:10 -04:00
hathach
a516d1123f
fix typos
2018-08-22 19:42:41 +07:00
hathach
02b1b53153
Merge branch 'master' into nrf52_dfu_touch1200
2018-08-22 15:24:12 +07:00
hathach
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
Dan Halbert
c503cf990b
forgot to change .travis.yml
2018-08-21 20:35:58 -04:00
Dan Halbert
85df32907f
rename nrf boards to feather_nrf52832 and feather_nrf52840_express
2018-08-21 18:45:37 -04:00
hathach
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
hathach
1c4accfa39
Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200
2018-08-21 15:17:03 +07:00
hathach
b7dd33b76e
add touch 1200 for dfu-flash
2018-08-21 15:15:44 +07:00
Scott Shawcroft
182a8d7120
Merge pull request #1131 from tannewt/hallowing3
...
Support Hallowing in 3.x
2018-08-20 18:26:07 -07:00
Scott Shawcroft
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff.
2018-08-20 18:04:35 -07:00
Scott Shawcroft
44de3d49a8
Speed up zero neopixel pulses.
...
SK6812 on 5v is pickier than WS2812 on 5v.
Hopefully fixes #1083 .
2018-08-20 17:04:46 -07:00
ladyada
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-20 10:52:33 -07:00
Dan Halbert
1768057e87
add HalloWing
2018-08-20 10:52:24 -07:00
Noralf Trønnes
eefb6842a0
i2cslave: Fix missing translate() when raising exceptions
...
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
2018-08-18 16:00:06 +02:00
Scott Shawcroft
1a6f6ff8e4
Merge pull request #1122 from Jahor/patch-1
...
Fix PWM Support on port 1 of NRF52840
2018-08-17 16:54:03 -07:00
Scott Shawcroft
4a4d84ba42
Merge pull request #1064 from notro/i2cslave
...
Add busio.I2CSlave
2018-08-17 16:51:45 -07:00
Egor Leonenko
18e9f74738
Fix PWM Support on NRF52840
...
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
2018-08-17 19:34:03 +12:00
Scott Shawcroft
e8cf6a9072
Update to merged peripheral change.
2018-08-16 18:05:53 -07:00
Scott Shawcroft
96534e598e
Fix unix coverage and update translations.
2018-08-16 17:41:53 -07:00
Scott Shawcroft
76e0373576
Fix nrf and unix
2018-08-16 17:41:38 -07:00
Scott Shawcroft
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
Scott Shawcroft
de5a9d72dc
Compress all translated strings with Huffman coding.
...
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.
Builds without LTO work as well but include both untranslated
strings and compressed strings.
This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531 .
2018-08-16 17:40:57 -07:00
Noralf Trønnes
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
Noralf Trønnes
b6822b86ac
busio/I2C: Split out samd_i2c_get_sercom()
...
It will be shared with I2CSlave.
2018-08-16 17:06:40 +02:00
ladyada
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
hathach
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
Dan Halbert
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings
...
Fixes and translate more strings.
2018-08-09 20:00:18 -04:00
Scott Shawcroft
24e53ad591
Rework escaping and fix ESP build.
2018-08-09 15:58:45 -07:00
Scott Shawcroft
86d2154d71
Change file mode back.
2018-08-09 09:14:14 -07:00
Scott Shawcroft
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
Jeff Epler
b0e33f6a11
atmel-samd: UART: allocate rx buffer in long-lived region
...
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.
However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
2018-08-08 19:21:57 -05:00
Dan Halbert
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel
...
Retune neopixel timings on SAMD51. They were too slow.
2018-08-07 21:33:12 -04:00
Scott Shawcroft
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow.
...
Fixes #1083
2018-08-07 16:58:37 -07:00
Scott Shawcroft
933add6cd8
Support internationalisation.
2018-08-07 14:58:57 -07:00
Dan Halbert
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
Dan Halbert
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
Scott Shawcroft
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
Scott Shawcroft
64e5691fe7
Update to peripherals merge.
2018-08-02 13:59:12 -07:00
Scott Shawcroft
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
Scott Shawcroft
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity.
2018-08-02 11:07:22 -07:00
Scott Shawcroft
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing.
2018-08-02 00:51:52 -07:00
hathach
0bc3432106
Merge branch 'master' into nrf52_sys_module
2018-08-01 11:53:12 +07:00
Dan Halbert
65bd07bb0b
Merge pull request #1074 from hathach/nrf52840_usb_hid
...
Nrf52840 usb hid
2018-08-01 00:47:50 -04:00
hathach
592c190069
PR review clean up
2018-08-01 11:31:32 +07:00
hathach
8640d37149
try to address sys module, compile ok
2018-08-01 10:19:20 +07:00
hathach
200669216e
more clean up
2018-08-01 08:52:07 +07:00
hathach
bac233e99b
clean up
2018-08-01 08:47:41 +07:00
hathach
533d8dda96
fix samd usb hid typo
2018-08-01 08:40:04 +07:00
hathach
6ddd8583da
clean up
2018-08-01 08:20:20 +07:00
