microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
microDev
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Bernhard Boser
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
Bernhard Boser
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
Bernhard Boser
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
root
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
root
ed6cc64c49
Corrected issue with BLE not working on nrf52840
2020-09-04 16:59:41 -05:00
Dan Halbert
94ecf33a5c
Merge pull request #3281 from dhalbert/fix-spim3-buffer-location
...
SPIM3 buffer must be in first 64kB of RAM
2020-08-17 19:28:03 -04:00
Dan Halbert
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
Jeff Epler
760a171903
nrf: Make port build with -Werror=undef
...
.. build-tested on particle_xenon
2020-08-12 07:32:18 -05:00
Scott Shawcroft
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
Scott Shawcroft
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
Mark Olsson
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
Dan Halbert
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
Dan Halbert
fbc8719fad
ringbuf tested
2020-04-21 22:40:12 -04:00
Dan Halbert
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
William Moser
c961ed9025
Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files
2020-03-24 13:25:02 -04:00
Scott Shawcroft
6f60afe8c5
First try at lowering the power consumption
2020-03-13 11:12:30 -07:00
Dan Halbert
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
Dan Halbert
634d246910
relicense nrf SPI.c to MIT
2020-02-20 16:00:21 -05:00
Dave Marples
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
Dan Halbert
e00b3269fe
use properly-sized SPI transactions
2020-02-12 15:04:19 -05:00
Dan Halbert
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
Dan Halbert
b6da2fa173
nrf: fix i2c frequency setting
2020-02-05 11:25:31 -05:00
Dan Halbert
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
Dan Halbert
189f2d5f07
Make requiring I2C pullups be optional
2020-01-09 17:31:50 -05:00
Scott Shawcroft
6afb8dadbc
Change SPI and I2C in the same way.
2020-01-03 15:14:37 -08:00
Scott Shawcroft
cfd71d9023
Fix nRF UART reset
...
disable only turns off ENABLE but doesn't set the init tracking that
nrfx uses. uninit hangs if ENABLE is off and is called because it
waits forever for TX to stop.
2019-12-27 20:18:07 -08:00
hathach
894cad2e17
upgrade nrfx API to v2
2019-12-17 21:39:52 +07:00
Jeff Epler
95d9c49e43
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-29 11:27:09 -06:00
Dan Halbert
b32a9192df
make UART.write be blocking on SAMD; add timeout property
2019-11-27 13:05:29 -05:00
Jeff Epler
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
Dan Halbert
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
Jeff Epler
11dd3a260e
nrf: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
Dan Halbert
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
iot49
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
Dan Halbert
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
Scott Shawcroft
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
Radomir Dopieralski
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
Dan Halbert
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
Dan Halbert
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
Dan Halbert
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
hathach
6b0d93cea3
correct i2c max len
2018-12-28 21:14:27 +07:00
hathach
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits)
2018-12-28 16:30:11 +07:00
hathach
3ee766bc01
put received bytes to fifo when error
2018-12-28 01:05:30 +07:00
hathach
d092722ae8
fix #1407 keep receiving in case of error
2018-12-28 00:40:29 +07:00
