d59a57ecc9
Update pins.c
...
Changed GIO00 to GIO0
2023-03-16 16:54:38 -05:00
eab8633a9e
Updated Fig Pi Pins and Added Memory Option
...
Updated the Fig Pi pin definition to match latest production and fix errors. Added an optional memory chip for parts shortage issues.
2023-03-16 16:41:49 -05:00
208c081c95
bugfix_#7706
2023-03-16 11:10:57 +01:00
d7fb21ec76
Revert "bugfix"
...
This reverts commit 4f1627f68e
2023-03-16 11:02:41 +01:00
4f1627f68e
bugfix
2023-03-16 10:56:22 +01:00
37b9f778e1
Merge pull request #7237 from kdb424/main
...
Add Boardsource Blok
2023-03-16 00:02:10 +05:30
6062e75b08
add Blok
2023-03-15 08:58:53 -07:00
f2931dec7a
empty RUN_BACKGROUND_TASKS for unix port
2023-03-14 18:26:23 -05:00
5bb8a7a7c6
Improve iMX RT performance
...
* Enable dcache for OCRAM where the VM heap lives.
* Add CIRCUITPY_SWO_TRACE for pushing program counters out over the
SWO pin via the ITM module in the CPU. Exempt some functions from
instrumentation to reduce traffic and allow inlining.
* Place more functions in ITCM to handle errors using code in RAM-only
and speed up CP.
* Use SET and CLEAR registers for digitalio. The SDK does read, mask
and write.
* Switch to 2MiB reserved for CircuitPython code. Up from 1MiB.
* Run USB interrupts during flash erase and write.
* Allow storage writes from CP if the USB drive is disabled.
* Get perf bench tests running on CircuitPython and increase timeouts
so it works when instrumentation is active.
2023-03-14 12:30:58 -07:00
d4840cbf10
translate() messages must be one string
2023-03-14 13:13:58 -04:00
9083ae02de
Merge pull request #7710 from PaintYourDragon/pb-feather-dvi
...
Add Feather RP2040 DVI
2023-03-14 13:10:47 -04:00
141a43cdce
Merge pull request #7702 from dhalbert/tinyusb-update
...
update tinyusb to latest
2023-03-14 09:59:45 -07:00
b432cf6201
fix rp2040 with new shared irq usb handler
2023-03-13 22:46:27 +07:00
f5b8b8d6f2
tailing whitespace removed (pre-commit run failed)
2023-03-13 15:30:52 +07:00
49e9ea2e9a
add missing pins 4, 36 and 39 - and 4 aliases
...
The original list left D4 (GPIO4), VN (GPIO39) and VP (GPIO36) out.
Added aliases for 1, 3, 16 and 17 with their GPIO names, even though they won't be used as such since they are UART0 and UART2
2023-03-13 15:17:55 +07:00
daa927a114
switch STM to dwc2 USB
2023-03-12 14:02:38 -04:00
7163ab390c
Merge pull request #7715 from bill88t/waveshare_esp32s2_pico
...
Even more board definition improvements for `waveshare_esp32s2_pico`
2023-03-12 07:46:42 +05:30
bfc551c158
Invert led
2023-03-11 14:14:47 +02:00
76e83a432c
Debug uart, default spi/i2c
2023-03-11 14:05:45 +02:00
5f0aa4a608
change board config of some esp32s3 boards
...
- remove unnecessary optimization flags
- shrink adafruit_feather_esp32s3_reverse_tft
2023-03-11 08:53:44 +05:30
ff0a17d095
Merge branch 'adafruit:main' into main
2023-03-10 13:45:53 -08:00
b6a7613350
Merge pull request #7470 from microdev1/espnow
...
Add ESP-NOW Support
2023-03-10 12:21:56 -05:00
838450643e
Merge branch 'adafruit:main' into main
2023-03-10 09:50:27 -05:00
0f31ba676b
update errata fixes for RP2040
2023-03-09 17:40:53 -05:00
353411af4b
Merge pull request #7701 from dhalbert/background-task-for-7673
...
run background tasks during multi-part DMA
2023-03-09 17:25:42 -05:00
58f28b98be
minor doc fix
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-03-10 00:01:44 +05:30
fe40035cb9
Merge pull request #7697 from dhalbert/pico-sdk-cyw43-update
...
pico-sdk to 1.5.0; cyw43-driver to 0.9.0
2023-03-09 10:02:45 -08:00
fcc4299b92
Merge pull request #7686 from gamblor21/esp_family_spi_speed_increase
...
ESP32 Family: Add multiple transctions to SPI for improved efficency
2023-03-09 10:01:02 -08:00
96e2a72d71
run background tasks during multi-part DMA
2023-03-09 11:53:16 -05:00
2ebc0ea51c
GitHub online editor introduced spaces on blank lines :(
2023-03-09 11:30:38 -05:00
de3c5ad2f4
add blank lines around aliased pins
2023-03-09 11:00:55 -05:00
0054362784
Updated Pin Assignments (Add SPI definition)
...
Changed incorrect i2C pins assignment in mpconfigboard.h (changed SDA/SCL to GPIO 8/GPIO 9.
Rename SD_MOSI, SD_MISO and SD_SCK to MOSI, MISO and SCK
Added SPI define in mpconfigboard.h for SPI
2023-03-09 10:26:54 -05:00
874ba4ec68
revert `Communicate` class and more
2023-03-09 12:04:50 +05:30
fef9571400
pico-sdk to 1.5.0; cyw43-driver to 0.9.0
2023-03-08 22:43:12 -05:00
ab70506178
Move background tasks to slower routine
2023-03-08 16:14:58 -06:00
6da2ca6770
Update pins.c
...
Added a comma (,) to the the end of the definition for board_spi_obj
2023-03-08 16:46:31 -05:00
1200fe405f
Change GPIO pins for SDA and SCL
...
Chnage the SDA pin define to GPIO9 and SCL pin define to GPIO8. This now matches the currect GPIO pins numbers in pins.c
The previous GPIO pins number in mpconfigboard.h were incorrect
2023-03-08 16:38:16 -05:00
c133e79a08
Updated mpconfigboard.h
...
Add #defines for SPI_BUS_SCK, SPI_BUS_MOSI and SPI_BUS.MISO
2023-03-08 16:31:47 -05:00
7f8a3052be
Updated Pins.c definitions for SPI and I2C
...
Removed "CD" from the pin definitions for (MISO, MOSI and SCK pins). Specifically Pins 13, 15 and 14. Added Pin definitions for I2C and SPI objects
2023-03-08 16:25:18 -05:00
fa55669da5
Merge branch 'main' of https://github.com/PaintYourDragon/circuitpython
2023-03-08 12:55:23 -08:00
a2514ca304
Add board adafruit_feather_rp2040_dvi
...
Based on Feather RP2040 SCORPIO, but new USB PID (from MBAdafruitBoards/Production) and pin name changes for GP16-23 (CKN/CKP etc., from board schematic).
2023-03-08 11:37:51 -08:00
35e82a5f5e
Merge pull request #7676 from microdev1/ci
...
CI: Enhancements & Refactoring
2023-03-08 10:36:05 -08:00
7f5f93126c
Move background task check
2023-03-06 16:26:22 -06:00
dd05118645
Add multiple transctions to SPI
2023-03-05 22:59:10 -06:00
bd889926e5
Merge pull request #7679 from dhalbert/socket-fix
...
be more careful when setting socket to non-blocking
2023-03-04 16:07:02 -05:00
08c9eb9f00
be more careful when setting socket to non-blocking
2023-03-04 14:40:06 -05:00
4e169bb956
Merge pull request #7673 from gamblor21/atmel-spi-tx-len-fix
...
Fix for long length SPI writes on ATMEL
2023-03-04 09:21:27 -06:00
b17364a447
conditionally build all languages
2023-03-04 15:08:54 +05:30
8a10069995
Merge pull request #7674 from jepler/m7-bootloader-reset
...
use right DBL_TAP_REG when resetting to bootloader
2023-03-03 13:44:22 -08:00
b2a08e2cce
use right DBL_TAP_REG when resetting to bootloader
...
This helps my development scripts work better, and probably also fixes
a problem switching from the circuitpython environment back to arduino.
(specifically, the "1200 baud" serial trick was not rebooting into
the bootloader but was just resetting)
2023-03-03 10:09:31 -06:00
6987d3d752
Fix for long length writes
2023-03-02 21:55:21 -06:00
e2c6cf5929
fix: Increases drive strength of 32kHz external crystal, in line with calculations specified in ST AN2867 sections 3.3, 3.4, and STM32L4 datasheet DS12023 Table 58. LSE oscillator characteristics.
...
The drive strength RCC_LSEDRIVE_LOW is marginal for the 32kHz crystal oscillator stability, and RCC_LSEDRIVE_MEDIUMLOW meets the calculated drive strength with a small margin for parasitic capacitance.
2023-02-28 14:34:10 -08:00
859a48723f
Merge pull request #7633 from tannewt/fix_imx_pwm
...
Fix `pwmio` on iMX RT.
2023-02-28 14:11:06 -05:00
8e4626ffba
Merge pull request #7559 from startup-potech/main
...
Request to add a COSMO-Pico board
2023-02-28 09:49:31 -08:00
482ba05958
Merge pull request #7658 from titimoby/8.0.x.add_Lilygo_tembed
...
add support Lilygo T-embed esp32s3 board
2023-02-28 09:45:21 -08:00
c6d38e4ba8
add support Lilygo T-embed esp32s3 board
2023-02-28 14:02:21 +00:00
f22f2a3662
enable bus device on hallowing M0
2023-02-27 18:44:08 +01:00
26bab620f7
Merge pull request #7626 from bill88t/wspico-psram-speedup
...
Waveshare ESP32-S2 Pico psram definition improvements
2023-02-25 16:15:24 +05:30
f9831b3bbc
Merge pull request #7639 from adafruit/8.0.x
...
Merge 8.0.x up to main
2023-02-24 19:32:09 -05:00
8c714ec864
Merge pull request #7497 from tannewt/banglejs2
...
Add Bangle.js 2, JDI memory displays and ACeP epd
2023-02-24 18:20:06 -05:00
adf5b7a23c
Merge pull request #7602 from milindmovasha/espressif-analogbufio
...
Espressif analogbufio implementation
2023-02-24 13:09:27 -08:00
144aed40e3
Rename flag. Turn on UTF-8 and flag on unix
...
Also added label portion to the test.
2023-02-24 12:23:59 -08:00
f832386cda
Merge remote-tracking branch 'adafruit/main' into banglejs2
2023-02-23 14:43:38 -08:00
b79661d631
Alphabetize, fix typo and remove incorrect comment
2023-02-23 14:34:54 -08:00
8996fda049
"an array" -> "array"
2023-02-23 13:55:52 -05:00
9058beb573
"a array" to "an array"
2023-02-23 13:41:49 -05:00
d5e936ce7b
Merge pull request #7628 from RetiredWizard/broadcomspi
...
Port/Broadcom Switch to "unmeasured" core clock speed check
2023-02-23 09:53:38 -08:00
9e73e8351a
Calling stop_dma function while retruning errors from start_dma after configuring dma
2023-02-23 14:47:05 +05:30
09f84e3513
Changed the code structure to start and stop dma from readinto function as per review comment to support one shot conversion mode for analogbufio
...
Added check for verifying the buffer type passed to readinto is H
2023-02-23 13:32:48 +05:30
ea8dd95931
Update common-hal routines with new params
2023-02-22 23:04:41 -05:00
08ac95a2eb
Added updated submodule back
2023-02-22 23:03:53 -05:00
7cfc689f72
Removed peripherals submodule
2023-02-22 22:59:55 -05:00
c8dd0369a4
Added broadcom-peripherals back in
2023-02-22 20:12:39 -05:00
9cc27be0bf
Removed broadcom-peripherals
2023-02-22 20:00:53 -05:00
460dda0426
Merge pull request #7616 from dhalbert/8.0.x-fix-atmel-uart
...
Fix pad assignments on atmel-samd UART
2023-02-22 17:24:29 -05:00
1acf65ee22
Fix `pwmio` on iMX RT.
...
It now handles deinit, never_reset and sharing tracking. PWM
now runs in the WAIT state as well during a time.sleep().
_reset_ok() was removed because it was called in one spot right
before deinit().
Some PWMOut were also switched to a bitmap for use instead of
reference count. That way init and deinit are idempotent.
Fixes #6589 . Fixes #4841 . Fixes #4541 .
2023-02-22 11:22:39 -08:00
1461e9448d
Merge branch 'adafruit:main' into wspico-psram-speedup
2023-02-22 20:30:54 +02:00
c2c7b9345e
Merge pull request #7625 from ftab/ftab-lyrat
...
Add ESP32-LyraT board
2023-02-22 10:27:40 -08:00
b67c0b7949
Merge pull request #7585 from bill88t/settings-toml-pystack
...
Settings.toml-configurable pystack
2023-02-22 10:13:31 -08:00
c73f008688
Make vcmailbox call change for AUX SPI instances
2023-02-22 11:58:13 -05:00
de9233f84a
raspberrypi: SSLSocket: raise OSError when appropriate
...
Rather than returning the negative error value.
This is intended to close #7606 , though I did not test with mqtt.
Instead, I created a simple standalone test program:
```python
import wifi, socketpool, ssl, time
#wifi.radio.connect(<omitted>)
import socketpool
socket = socketpool.SocketPool(wifi.radio)
ctx = ssl.create_default_context()
b = bytearray(8)
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sss = ctx.wrap_socket(s, server_hostname='example.com')
sss.connect(('example.com', 443))
sss.setblocking(False)
r = sss.recv_into(b)
print(r, b) # prints 4294967285 which is -11 as unsigned
sss.close()
```
Before the change, r was the out of range value 4294967285. After the
change, the recv_into call raises OSError instead.
This is comparable to the behavior on standard Python, though an
SSLWantReadError is raised instead.
The original (mis)behavior seems to match what was uncovered deep inside
minimqtt by adding logging:
```
370.578: DEBUG - PKT: _sock_exact_recv: recv_len = 4294967285
```
2023-02-22 10:07:48 -06:00
d1f5004121
Add ESP32-LyraT board
2023-02-22 10:54:44 -05:00
1d12014ec7
disable pixelmap
2023-02-22 13:31:15 +02:00
7c717a54f3
Switch to "unmeasured" core clock speed check
2023-02-21 22:10:36 -05:00
1ea118684c
120M qspi
2023-02-22 00:49:55 +02:00
c7d9eecfd6
Merge pull request #7623 from DavePutz/issue_7606
...
Correctly raise OS error in socketpool_socket_recv_into()
2023-02-21 16:17:30 -05:00
de5f58a61d
Merge branch 'main' into banglejs2
2023-02-21 12:04:28 -08:00
a8b34bd067
Merge pull request #7549 from gamblor21/gif_displayio_support
...
Animated GIF support
2023-02-21 11:39:29 -08:00
7e6e824d56
Correctly raise OS error in socketpool_socket_recv_into()
2023-02-21 13:38:29 -06:00
650c4c5d92
pystack+ rainbow-
2023-02-21 20:50:07 +02:00
5dba32ed07
Try to pass ci with rainbowio
2023-02-21 17:42:08 +02:00
b0384b5721
Merge branch 'adafruit:main' into settings-toml-pystack
2023-02-21 13:35:19 +02:00
8ffa7b1d55
Add Adafruit HUZZAH32 breakout
2023-02-20 20:04:22 -05:00
2684aeb838
don't check for RX and TX both none in ports: now checked in shared-bindings
2023-02-20 19:11:16 -05:00
6d51356324
Fix pad assignments on atmel-samd UART
2023-02-19 20:42:44 -05:00
f1b6deacda
Yet another formatting change related to whitespaces
2023-02-18 14:49:11 +05:30
b2c6fad713
Additional formatting change related to whitespaces
2023-02-18 14:45:37 +05:30
4683e48337
Further formatting changes related to whitespaces
2023-02-18 14:40:12 +05:30
ead5751803
Pre-commit: Done the formatting changes
...
Pre-commit: Fixed compilation error for other ESP32C3/ESP32S3/ESP32H2 boards
Review comment: Removed the self->pin NULL check
Review comment: Using raise_ValueError_invalid_pin when adc_index is not ADC_UNIT1 for ESP32
Review comment: Optimized the code to set data in buffer from DMA results
Fix: For ESP32C3 boards continuing collecting samples after channel mismatch as DMA runs in alternating UNIT mode
Fix: For ESP32S3 and ESP32H2 setting conversion mode to type2
2023-02-18 14:26:50 +05:30
508f2015b6
Merge pull request #7605 from Neradoc/pico-uart-in-use-error
...
Tweak the UART in use message on RP2040
2023-02-18 08:35:52 +05:30
13716c9c30
tweak the UART in use message on RP2040
2023-02-17 23:29:44 +01:00
58532ece3f
Moved CIRCUITPY_ANALOGBUFIO flag to correct place in alphabetical order
2023-02-17 23:50:41 +05:30
f71b418a7d
Merge branch 'adafruit:main' into settings-toml-pystack
2023-02-17 16:58:03 +02:00
8a4a408707
Disable settable-pystack too to make more space
2023-02-17 16:35:16 +02:00
5635077853
Espressif analogbufio implementation
2023-02-17 19:19:15 +05:30
388279d9c1
Disable rainbowio instead.
2023-02-17 15:24:27 +02:00
17e2598fa1
Revert "settable pystack = 0 for kicksat-sprite"
...
This reverts commit f05c730a01
2023-02-17 15:23:01 +02:00
a2c22521b4
Updates to waveshare-esp32s2-pico board definition
2023-02-17 15:16:18 +02:00
f05c730a01
settable pystack = 0 for kicksat-sprite
2023-02-17 15:14:09 +02:00
bbadc00599
Merge pull request #7577 from dhalbert/safemode-py
...
Implement safemode.py
2023-02-16 14:15:20 -05:00
fd1c3ca784
Increase number of LWIP timers for MDNS
2023-02-15 16:40:45 -08:00
931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
...
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
that safe mode messages show up on the display.
ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.
For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
converted colors at each index.
* ColorConverter now caches the last converted color. It should make
conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
f79459cb70
Try -fweb -frename-registers to make more SAMD21 builds fit
2023-02-15 16:38:24 -05:00
fe40181144
Turn back on for pewpew_m4, turn off terminalio for incomplete fonts in pewpew_m4
2023-02-15 14:45:15 -05:00
32d86c3ea3
Merge pull request #7580 from adafruit/8.0.x
...
Merge 8.0.x up to main
2023-02-15 09:16:51 +05:30
48077daa7f
Merge pull request #7581 from gneverov/issue_7333
...
Add function common_hal_busio_uart_never_reset for rp2
2023-02-15 09:16:25 +05:30
0be53977f9
Merge pull request #7570 from RetiredWizard/broadcomNeopix
...
Broadcom pi zero2w neopixel misbehaving/crash fix
2023-02-14 09:56:18 -08:00
98b61279e4
Add function common_hal_busio_uart_never_reset for rp2
2023-02-14 09:05:24 -08:00
0f099cdb31
Turn off safemode.py for pewpew_m4
2023-02-13 22:52:39 -05:00
c39a51527f
Turn safemode.py off on non-external-flash SAMD21 builds
2023-02-13 21:48:03 -05:00
6ebb911a4d
pre-commit formatting fix
2023-02-13 21:06:47 -05:00
09ccf2988d
Replace bitwise or with boolean or
2023-02-13 21:04:11 -05:00
39d3d97ea4
Remove unnecessary memory barriers
2023-02-13 19:46:35 -05:00
fa435468fa
Merge branch 'main' into gif_displayio_support
2023-02-13 18:30:51 -06:00
d8231f1588
Implement safemode.py
2023-02-13 18:26:38 -05:00
be67cb72ad
Disable for pewpew_m4 for space
2023-02-13 17:04:54 -06:00
dcb6955fa5
use boolean and symbols
2023-02-13 14:58:37 -05:00
791aefd388
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:54 -05:00
575f177dd0
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:46 -05:00
7d236f2782
Merge pull request #7547 from ajs256/add_sprig
...
Add new board hack_club_sprig
2023-02-13 10:25:04 -08:00
676cbb308d
minor update to boards.c to fix mismatched number of LEDs causing LEDs not to be reset
2023-02-13 09:52:18 -06:00
5c2bd38684
Removed gifio module from tests
2023-02-13 09:40:16 -06:00
ec90d79d61
Merge pull request #7553 from kamtom480/sdk2.6.0
...
spresense: update SDK to 2.6.0
2023-02-13 09:04:35 -05:00
1679790481
Tweaked to run without delays on zero w
2023-02-11 20:21:25 -05:00
359a27e166
Pre-commit is stubborn
2023-02-11 12:19:21 -05:00
2104708c58
missed a trailing space
2023-02-11 12:17:55 -05:00
f29cd4a836
Pre-commit fix trim trailing whitespace
2023-02-11 12:13:34 -05:00
a462a316bd
Fix pre-commit formatting
2023-02-11 12:10:03 -05:00
a2bbca1428
Broadcom Raspberry Pi Zero2W neopixel timing fix
...
These changes result in working neopixel functionality. I've tested on
both the zero2w and the pi4b (The 4b didn't exhibit the original issue)
and the boards now behave properly with 1 to 30 pixels and the board hanging
no longer occurs.
Remove mod that didn't help during testing
Restoring back to original structure
Replace 2 microsecond delay w/deterministic loop
Remove unneded check for empty queue
Put transmit delay outside loop so Queue is used
Make sure last transmission is complete
2023-02-11 11:38:11 -05:00
e125370cd4
first commit
2023-02-09 01:59:59 +00:00
b9f689adf4
Use lowest drive level for PIO
2023-02-08 16:18:58 -06:00
e78143a2f5
fix copyright header
2023-02-05 11:18:23 -08:00
6c54bc9fd9
more espnow changes
...
- improve docs
- use existing list methods
- change `recv` to `read`
2023-02-05 12:31:08 +05:30
c0a9c71057
replace `ESPNowStats` with `Communicate` class and more
2023-02-05 01:42:32 +05:30
07e8506b79
Add board hack_club_sprig
2023-02-03 20:19:11 -08:00
b03eed32fb
espressif: i2sout: wait a short time to succesfully write data
2023-02-03 14:22:03 -06:00
41dff5d8cc
espressif: i2sout: don't needlessly set sample rate
...
this may reduce glitches when starting samples
2023-02-03 14:22:03 -06:00
75ed28665c
espressif: i2sout: enlarge buffers
2023-02-03 14:22:03 -06:00
ff95e96160
add `ESPNowStats` class and more
2023-02-04 01:23:45 +05:30
f13e6d8758
update flash chip for Metro M7 1011
2023-02-03 11:56:42 -05:00
a1644f15ea
use esp error for espnow
2023-02-03 15:42:44 +05:30
cac90a6969
refactor common espnow functions
2023-02-03 12:35:06 +05:30
e30126e335
remove `sync` from espnow
2023-02-03 11:12:07 +05:30
f100838ae5
remove `peers_table` from espnow
2023-02-03 10:14:50 +05:30
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419
...
Correct assignment of RMT channels on ESP32C3
2023-02-02 17:35:37 -05:00
750535d4af
Correct assignment of RMT channels on ESP32C3
2023-02-02 14:55:57 -06:00
14c3b52b8d
Merge branch 'main' into espnow
2023-02-03 01:37:07 +05:30
7028a3adfe
rework espnow api
2023-02-03 01:32:28 +05:30
77c6daf4b8
don't throw exception
2023-02-01 16:33:22 -08:00
ae4bb75e29
split espnow between bindings and common-hal
2023-02-01 18:53:58 +05:30
3fdebd4f60
spresense: Add HDR camera support
2023-02-01 12:37:29 +01:00
9c430d45d1
use truthiness of the object itself instead of `any`
2023-02-01 15:27:55 +05:30
d9d94eacca
run updated pre-commit
2023-02-01 13:38:41 +05:30
9ab0733a28
Merge pull request #7530 from BrainBoardz/main
...
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
2023-01-31 23:33:34 -05:00
2656ccffe4
Commit01-31
2023-01-31 19:35:57 -05:00
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main
...
Update mpconfigboard.h with LED definition for BPI-Bit-S2.
2023-01-31 16:08:10 -05:00
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3
...
seeed_xiao_esp32c3 flash mode change to dio
2023-01-31 11:29:24 -08:00
b8d6f20308
Add front buttons as D0/1/2, matching the silk
2023-01-31 10:02:21 -06:00
f3b1ceeb81
Seventh Commit
2023-01-30 20:45:57 -05:00
f71b4bc018
Sixth Commit
2023-01-30 20:32:19 -05:00
e10816f34c
Fifth Commit
2023-01-30 20:20:37 -05:00
3f3519e0ab
Fourth Commit
2023-01-30 20:10:34 -05:00
7c525fdcb0
Third Commit
2023-01-30 19:54:11 -05:00
34f480d735
Second Commit
2023-01-30 19:03:57 -05:00
d6ebf1bf43
First commit
2023-01-30 17:12:21 -05:00
6e31cd0a4f
Update mpconfigboard.h
2023-01-30 15:41:42 +08:00
dc5cd27555
seeed_xiao_esp32c3 flash mode change to dio
...
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
2023-01-30 02:01:33 -05:00
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8
...
Espressif ESP32-S3 DevKitC-1-N32R8
2023-01-29 10:27:08 +05:30
858e212e34
enable octal flash in sdkconfig
2023-01-29 00:23:02 +05:30
7522522a0a
Merge pull request #7501 from pypewpew/pewpewm4-cdc
...
pewpew m4: enable CDC back
2023-01-28 12:00:49 -05:00
5b814a4561
pewpew m4: enable CDC back
...
CDC got disabled on this board by mistake
2023-01-28 17:20:22 +01:00
401d160c58
opi flash needs to be flashed in dout
2023-01-28 11:04:21 +05:30
cda5689263
move `esp32_camera` to `espcamera`
2023-01-27 22:05:43 +05:30
a7b12de6ee
Merge pull request #7473 from MicroDev1/espulp
...
Add ULP FSM
2023-01-26 09:57:35 -08:00
9b98d485bb
switch to `ReadableBuffer` and `WriteableBuffer`
2023-01-26 14:13:38 +05:30
bfb77d0544
move `ULPArch` to `Architecture`
2023-01-26 13:01:14 +05:30
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2023-01-26 11:21:43 +05:30
e5cfab060d
remove redundant config messages
2023-01-26 11:20:18 +05:30
90e8f9d4a8
fix espressif 32MB partition table
2023-01-26 11:19:22 +05:30
5fb0333aa9
Merge pull request #7478 from jepler/fix-esp32s3-reverse-tft-pid
...
Feather ESP32-S2 Reverse TFT: Update PID to match internal list
2023-01-25 21:24:00 -05:00
ace2062564
remove board that will not be manufactured
2023-01-25 15:10:06 -06:00
19c1eb2d1d
update esp-idf from latest release/v4.4
2023-01-25 15:44:43 -05:00
f56a6a92f4
Merge pull request #7474 from RetiredWizard/broadcomRTC
...
Broadcom port: Add 'fake' RTC support
2023-01-25 11:33:17 -08:00
9487fb51a4
prettify espressif partition tables
2023-01-25 19:40:14 +05:30
ecde85734c
Remove a couple unneeded includes.
2023-01-23 15:17:24 -05:00
fb4def2824
remove CIRCUITPY_RTC = 1 from mpconfigport.mk
...
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
2023-01-23 14:52:20 -05:00
43b1d2618e
Remove erroneous left over comment
2023-01-23 14:19:27 -05:00
e018c6d022
Update PID to match internal list
2023-01-23 13:13:27 -06:00
3c10dd8b5f
update espnow api
2023-01-23 23:51:10 +05:30
f15e84de6c
update espnow module
2023-01-23 09:42:39 +05:30
Benjamin Shockley
kreasteve
MicroDev
Kyle Brown
foamyguy
Scott Shawcroft
Dan Halbert
Dan Halbert
hathach
Matthias Kreier
Bill Sideris
Paint Your Dragon
BrainBoardz
gamblor21
Jeff Epler
Matthew McGowan
Thierry Chantier
Neradoc
Milind
RetiredWizard
Dennis Field
root
Gregory Neverov
Mark
Pierre Constantineau
Ubuntu
Alex
Gregory Neverov
Kamil Tomaszewski
brainboardz
Wind-stormger
Radomir Dopieralski