01c1296197
nrf52 uart io rx work reliably
2018-09-25 12:37:31 +07:00
1782ceab35
uarte malloc if buffer is not in SRAM
2018-09-24 16:18:49 +07:00
4015023e01
clean up uart io
2018-09-24 16:12:05 +07:00
7bbd449f06
uarte rx work fine
2018-09-24 15:54:32 +07:00
fdd3e91753
changing to nrf uarte, tx works fine
2018-09-24 14:56:52 +07:00
7a1b4ccc9b
Merge branch 'master' into nrf52_uart_io
2018-09-24 12:50:48 +07:00
f2c960e89b
Merge pull request #1205 from hathach/nrf52_autoreload
...
add autoreload for nrf52
2018-09-21 16:48:21 -04:00
e1fe7e71a1
add autoreload
2018-09-22 02:08:00 +07:00
2c15d12f2f
allow multiple I2C and SPI; improve nrfx_config.h
2018-09-20 20:45:30 -04:00
816ff05253
clean up
2018-09-21 03:53:35 +07:00
dddc437ea7
got rx working finally
2018-09-21 03:48:13 +07:00
fe1a297889
still have issue with initial uart rx
2018-09-21 01:27:52 +07:00
2309e60c0d
WIP; problem with staticly allocated IRQ handlers
2018-09-19 21:59:04 -04:00
9c25306877
uart rx got some issue with irq
2018-09-20 02:12:21 +07:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
56b7f3ba64
fix translate omission; pca10059 fix in .travis.yml
2018-09-18 16:28:27 -04:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
7e8816ad6f
Add VOLTAGE_MONITOR alias to pin D31/A7
2018-09-13 23:46:47 +02:00
6a72084198
fix nrf builds; sphinx 1.8.0 crashing: use lower version
2018-09-12 18:37:03 -04:00
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
100603a60b
neopixel_write merge; alphabetize stuff in Makefile
2018-09-05 17:38:59 -04:00
4c3b4cacfa
Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming
2018-09-05 13:15:22 -04:00
ccd87a33b6
use nrf_pwm instead of direct registers
2018-09-05 13:18:36 +07:00
b5c03a7085
generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t
2018-09-04 16:43:21 -04:00
f4a98e909c
fix nrf52832 build 2
2018-09-04 23:25:08 +07:00
b9e8e3cd1f
fix nrf52832 build
2018-09-04 20:54:36 +07:00
1fe3ed87eb
run background job while waiting for neopixel write seqend
2018-09-04 19:24:45 +07:00
0d92c65829
correct disconnection check to only dtr
2018-09-04 18:36:08 +07:00
3ae24d9f9a
add neopixel_write implementation, work ok
2018-09-04 18:33:08 +07:00
e17253071e
adding neopixel write
2018-09-04 15:51:49 +07:00
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
0e8d146184
wip
2018-08-31 18:05:55 -04:00
87811ec3a0
update readme board name feather_nrf52832
2018-08-28 16:15:20 +07:00
ded38d30b6
rename pin.h to nrf_pin.h to avoid conflict with Pin.h
2018-08-26 20:37:12 -04:00
4cc33f8de6
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
2018-08-23 16:25:57 -04:00
728622f09d
Merge pull request #1139 from hathach/nrf52_usb_serial
...
use unique DevicID for usb serial
2018-08-23 09:30:31 -04:00
4a8cd03de1
use unique DevicID for usb serial
2018-08-23 14:00:54 +07:00
fed1960424
remove s140 6.0.0 and s132 6.1.0 (not supported yet)
2018-08-23 00:27:39 +07:00
0c0ac06fc7
add SD 6.1.0 to download all
2018-08-22 23:09:09 +07:00
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
05ea9fd296
remove stray underscore
2018-08-22 10:26:52 -04:00
eaf4d19dbb
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
...
Merge #1137
2018-08-22 10:24:10 -04:00
a516d1123f
fix typos
2018-08-22 19:42:41 +07:00
02b1b53153
Merge branch 'master' into nrf52_dfu_touch1200
2018-08-22 15:24:12 +07:00
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
c503cf990b
forgot to change .travis.yml
2018-08-21 20:35:58 -04:00
85df32907f
rename nrf boards to feather_nrf52832 and feather_nrf52840_express
2018-08-21 18:45:37 -04:00
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
1c4accfa39
Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200
2018-08-21 15:17:03 +07:00
b7dd33b76e
add touch 1200 for dfu-flash
2018-08-21 15:15:44 +07:00
18e9f74738
Fix PWM Support on NRF52840
...
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
2018-08-17 19:34:03 +12:00
76e0373576
Fix nrf and unix
2018-08-16 17:41:38 -07:00
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
0bc3432106
Merge branch 'master' into nrf52_sys_module
2018-08-01 11:53:12 +07:00
592c190069
PR review clean up
2018-08-01 11:31:32 +07:00
8640d37149
try to address sys module, compile ok
2018-08-01 10:19:20 +07:00
200669216e
more clean up
2018-08-01 08:52:07 +07:00
bac233e99b
clean up
2018-08-01 08:47:41 +07:00
6ddd8583da
clean up
2018-08-01 08:20:20 +07:00
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-)
2018-07-31 12:42:21 -07:00
1e524f1b98
Merge branch 'master' into nrf52840_usb_hid
2018-08-01 00:58:23 +07:00
85bd46a4e1
enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS
2018-07-31 23:09:39 +07:00
4bece22c92
add hid keyboard LED indicator stub
2018-07-31 23:02:15 +07:00
05139e2aee
all hid devices seems to be ok
2018-07-31 22:54:26 +07:00
2c85f42330
add usb hid syscontrol
2018-07-31 21:57:00 +07:00
ef58adacd3
usb hid consumer control works
2018-07-31 21:19:02 +07:00
fd661c1d57
improve usb hid
2018-07-31 21:06:24 +07:00
12cf5e51c2
Allow for resizing the stack area.
2018-07-31 05:18:23 -07:00
27b2a9fe59
add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO
2018-07-31 17:50:32 +07:00
d15caf0dbd
hid keyboard and mouse work well
2018-07-31 16:42:04 +07:00
221d54a595
workaround to use lib/utils/interrupt_char.c
2018-07-31 14:28:34 +07:00
ae783b0b1a
update tinyusb, set scsi sense key for unsupported commands
2018-07-31 13:54:58 +07:00
2e260a0eab
Merge remote-tracking branch 'adafruit/master' into micropython-25ae98f-merge
2018-07-28 14:13:54 -04:00
f48b70050e
merge finished
2018-07-28 13:29:47 -04:00
368d59796f
adding usb_hid
...
compiled with undefined ref
2018-07-27 17:36:41 +07:00
21339c4155
house keeping
2018-07-27 17:22:21 +07:00
e86f7d0b88
add usb msc callback description
2018-07-27 00:17:14 +07:00
5bdf40901f
update tusb lib
2018-07-26 17:16:41 +07:00
bc760dd341
WIP: complete manual inspection of all significant changes
2018-07-23 21:34:25 -04:00
bb28faf39c
arturo182 review
2018-07-17 23:57:49 +07:00
a0b9871ba9
use seperate interrupt_char.c for nrf
...
move usb descriptors into usb.c
2018-07-17 21:52:20 +07:00
d4e84a9bd4
Merge branch 'master' into fix_nrf52840_serial
2018-07-17 21:27:16 +07:00
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
a20ab40ed2
Merge 3.0.0 final bugfixes and changes to master
2018-07-16 09:01:46 -04:00
bfe14ff824
Merge pull request #1014 from arturo182/nrf_shared_ble
...
nrf: Split the ble module into a shared part and the port implementation
2018-07-13 10:23:37 -04:00
414267388d
Merge pull request #1023 from arturo182/nrf_pyocd
...
nrf: Fix flashing with pyocd
2018-07-13 10:02:20 -04:00
05c1384b67
nrf: Split the ble module into a shared part and the port implementation
...
This allows other ports to implement these shared bindings.
2018-07-13 16:01:15 +02:00
883ca21321
nrf: Fix flashing with pyocd
2018-07-13 15:22:46 +02:00
9729fc3d31
nrf: Fix BLE on nRF52840 after adding the USB functionality
2018-07-13 14:55:02 +02:00
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
4962468fff
Merge pull request #1011 from arturo182/nrf_cleanup
...
nrf: More cleanup and porting
2018-07-10 15:44:30 -04:00
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
eab00ff140
nrf: Remove even more unused files
2018-07-10 14:59:22 +02:00
2c63fb2a94
nrf: Remove the random hal and module
...
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
2018-07-10 14:59:22 +02:00
1163462635
nrf: Remove the old time hal and replace with nRFx
2018-07-10 14:59:10 +02:00
e875f4e52e
Merge pull request #1002 from arturo182/nrfx_gpio
...
nrf: Rewrite the DigitalInOut hal using nRFx
2018-07-09 17:54:38 -07:00
0e819599e7
Merge branch 'master' into nrf52840_usbboot
2018-07-10 02:02:52 +07:00
7715d19efe
update bootloader hex
2018-07-10 01:20:37 +07:00
97a1ae911e
add family option for uf2
2018-07-10 01:18:14 +07:00
f199e87085
add ARRAY_SIZE
...
which is missing when building with debug mode
2018-07-10 01:06:57 +07:00
c5089d7274
generate uf2 by default
...
update tusb
2018-07-10 01:02:33 +07:00
64b9ee9c74
Merge pull request #985 from tannewt/heap_tweaks3
...
A few heap related tweaks
2018-07-08 23:21:38 -04:00
a45659c59a
Merge pull request #1000 from arturo182/nrfx_uart
...
nrf: Rewrite the UART HAL using nRFx
2018-07-08 20:17:47 -07:00
133b99b6f2
Merge pull request #999 from arturo182/nrf_mphalport
...
nrf: mphalport cleanup
2018-07-08 20:13:21 -07:00
fd5634e4aa
Merge pull request #992 from arturo182/nrf_i2c_fix
...
nrf: Fix I2C transfers with data larger than HW allows
2018-07-08 20:12:09 -07:00
388f554ff6
nrf: Rewrite the DigitalInOut hal using nRFx
2018-07-08 17:48:32 +02:00
25ece8fb3d
nrf: Rewrite the UART HAL using nrfx
2018-07-08 16:42:04 +02:00
c6a2a55bc9
nrf: Cleanup mpconfigboard files
...
All the removed defines were used by legacy modules that are now
removed.
2018-07-08 15:18:11 +02:00
887486582e
nrf: Remove port-specific help
...
It contains mentions to the pyb module which was removed.
The ble-specific help will be re-added later when the API
is stabilized.
2018-07-08 15:18:11 +02:00
1ea633c484
nrf: mphalport cleanup
2018-07-08 14:39:30 +02:00
da27253693
nrf: Fix I2C transfers with data larger than HW allows
2018-07-06 21:12:24 +02:00
ac74edb4e4
nrf: Fix SPI transfers with data larger than HW allows
2018-07-06 21:10:25 +02:00
baf68a936e
remove hal_time files
2018-07-06 15:59:20 +07:00
3e319694aa
mp_hal_delay_ms() to call background task
...
remove hal_time.c
2018-07-06 15:48:01 +07:00
948ddf8463
make SD default to s140 and s132 for nrf52840 and nrf52832
...
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
2018-07-06 14:39:49 +07:00
6ef3a0b181
implement filesystem_writable_by_python()
2018-07-06 13:01:07 +07:00
0806c0a38b
update fatfs cached sector when running write10
2018-07-05 17:43:38 +07:00
4e5d9a029d
clean up
2018-07-05 17:26:07 +07:00
0365912e28
implement msc with internal_flash api
...
Note: only work with SD is disabled.
2018-07-05 16:19:04 +07:00
3564e98181
implement msc flash, seems to work
2018-07-05 15:22:23 +07:00
1745e20391
replace jlink with native usb cdc for serial REPL
2018-07-05 11:30:12 +07:00
be2ff20e42
enable usb cdc interface
...
not handle anything yet.
2018-07-04 17:15:49 +07:00
7fff7f5e70
add usb msc support for nrf52840
2018-07-04 16:40:53 +07:00
8fb976f0bd
Split out assembly source files.
2018-07-03 07:25:54 -07:00
dbc977485c
Support gathering register values on nrf.
2018-07-03 06:31:07 -07:00
46c453cf0a
add tinyusb as submodule
2018-07-03 17:46:08 +07:00
b14b28067e
Merge branch 'master' into nrf52840_usbboot
2018-07-03 17:29:28 +07:00
b91202969a
Merge pull request #982 from arturo182/nrf_makefile
...
nrf: Save some flash bytes by using extra compile flags
2018-07-02 14:33:47 -07:00
05a088b369
Merge pull request #972 from arturo182/nrf_i2c
...
nrf: Rewrite the I2C common-hal using nrfx
2018-07-02 14:33:06 -07:00
da491ec961
nrf: Save some flash bytes by using extra compile flags
...
Both of these are used in the atsamd port as well.
2018-07-02 22:00:04 +02:00
7c9a0e2996
remove unnecessary extern in nrf/mphalport.c
2018-06-29 16:06:51 -04:00
2a0b857643
implement mp_hal_delay_us() to not need interrupts, and use it
2018-06-29 16:01:46 -04:00
b4fd77bb7c
fix nrf and esp8266 builds for OneWire fix
2018-06-29 00:00:05 -04:00
52a11547cb
fix OneWire timing and DigitalInOut.switch_to_input()
2018-06-28 23:32:20 -04:00
429168d4ac
Merge pull request #970 from arturo182/nrf_softdev
...
nrf: Remove unsupported softdevice defines
2018-06-28 14:01:19 -07:00
007155276a
Merge pull request #969 from arturo182/nrf_more_commonhal
...
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
2018-06-28 14:00:45 -07:00
039b4dc00a
Merge pull request #968 from arturo182/nrf_qstr
...
nrf: Remove old qstr defines
2018-06-28 13:57:46 -07:00
ae82a93b56
Merge pull request #967 from arturo182/nrf_os
...
nrf: Rewrite the os common-hal using nrfx
2018-06-28 13:55:34 -07:00
178c089045
nrf: Rewrite the I2C common-hal using nrfx
2018-06-28 22:45:02 +02:00
6e6a500801
nrf: Rewrite the os common-hal using nrfx
2018-06-27 21:01:07 +02:00
af5cb9c492
nrf: Remove unneeded hal files
2018-06-27 21:00:34 +02:00
b87bba8a28
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
2018-06-27 20:55:29 +02:00
1fa8fac5d7
nrf: Remove old qstr defines
...
These were used by the microbit music module, which was removed.
2018-06-27 20:52:13 +02:00
b9f02ca3c5
nrf: Remove unsupported softdevice defines
2018-06-27 20:48:57 +02:00
2a12fcd18b
nrf: Rewrite the AnalogIn common-hal using nrfx
2018-06-27 20:41:30 +02:00
c4f11dfd32
flash target update bootloader setting to skip crc checksum
2018-06-27 15:22:44 +07:00
8fbe1d73e9
clean up makefile
2018-06-27 15:13:20 +07:00
4920cc47ca
move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it
2018-06-27 14:31:08 +07:00
bed7310fd7
update bin files
2018-06-27 14:13:18 +07:00
ecd3993d43
update pin map for feather52840
2018-06-27 14:06:15 +07:00
91427b0b23
Merge pull request #959 from arturo182/nrf_spim
...
nrf: Rewrite the SPI common-hal using nrfx
2018-06-26 11:00:12 -07:00
d7d132d5a3
Merge pull request #960 from arturo182/nrf_stm_cleanup
...
nrf: Remove leftovers from stm32 code copy
2018-06-26 10:52:04 -07:00
16973d0559
nrf: Remove unused hal files
...
Makes it easier to keep track of what's left to rewrite.
2018-06-26 00:13:41 +02:00
2f1e678d60
nrf: Rewrite the SPI common-hal using nrfx
...
Use SPIM2 on nRF52832 and SPIM3 on nRF52840. SPIM3 is able to go
up to 32MHz!
2018-06-25 23:46:34 +02:00
b14d13e318
nrf: Remove leftovers from stm32 code copy
2018-06-25 23:38:10 +02:00
8d065fe0e6
update reamde
2018-06-26 00:16:58 +07:00
54547683f9
add uf2, bootloader target
2018-06-25 23:31:14 +07:00
4722371be9
update bootloader hex with uf2
2018-06-25 23:27:00 +07:00
f5be5ed6ee
Merge branch 'master' into nrf52840_usbboot
2018-06-25 17:12:24 +07:00
596a1d8843
nrf: Rename feather52 to feather52832 in readme files
2018-06-22 10:04:39 +02:00
25e71a56d4
nrf: Update the PCA10056 example to use new pin naming
2018-06-20 23:39:36 +02:00
deec17e4fe
nrf: Remove really old examples
...
These examples rely on machine and pyb modules, so they have to get.
Leaving 3 BLE examples that also rely on those modules, but can be
fixed to use CP's modules.
2018-06-20 23:38:18 +02:00
9c08db55ff
nrf: Cleanup machine and microbit leftovers
...
The music module was useful when this port had support for the
microbit, now that it was removed, it's not so useful.
2018-06-20 23:30:34 +02:00
c2d4d0a10b
nrf: Simplify pin generation and definition
...
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
2018-06-20 23:26:32 +02:00
ff918556cd
nrf: Simplify the board makefiles
...
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
2018-06-20 21:21:45 +02:00
5509f394dc
nrf: Add a nrfx submodule and prepare for using the new drivers
2018-06-20 20:43:59 +02:00
7cd34f2a94
nrf: Cleanup Makefile after nrf51 removal
2018-06-20 18:21:18 +02:00
97f10241f9
nrf: Fix default board after feather52 rename
2018-06-20 18:21:18 +02:00
b47a67d566
nrf: Remove machine, pyb and utime modules
...
Micropython legacy, keeping it consistent with atsam port.
2018-06-20 18:21:18 +02:00
61437106e7
update bootloader for feather nrf52840
2018-06-19 15:27:07 +07:00
6d2702ed98
Merge branch 'master' into nrf52840_usbboot
2018-06-19 14:50:17 +07:00
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6
...
nrf: Use the production version of s140 6.0.0
2018-06-18 16:29:41 -07:00
feee808955
nrf: Use the production version of s140 6.0.0
2018-06-18 23:12:28 +02:00
05547b72ac
Switch to Feather52s full name to avoid confusion with the nrf52840 later.
...
Fixes #940
2018-06-18 10:51:04 -07:00
9fc0ec6af8
Merge pull request #934 from microbuilder/usbboot
...
[WIP] nRF52840 USB Bootloader
2018-06-15 09:35:30 -07:00
35d38dbfed
update nrf52840 bootloader hex
2018-06-13 17:27:55 +07:00
8150150a24
return "false" for stub call
...
See #918 for discussion
2018-06-10 07:11:44 -04:00
8195df1b55
Stub out get_paused in nrf builds.
2018-06-08 14:01:54 -07:00
418e28c7dc
update nrf52840 bootloader hex and target
2018-06-08 16:10:49 +07:00
2b3436e87c
add feather nrf52 uart rts, cts support
2018-06-08 15:59:38 +07:00
c10899d13f
allow to flash feather52 and feather52840 with jlink
...
add crc bypass magic to bootloader settting
2018-06-08 15:11:17 +07:00
c854e2dc17
Merge branch 'master' into usbboot
2018-06-07 13:51:21 +07:00
9bb4ded5fa
Merge remote-tracking branch 'upstream/master'
2018-06-07 13:50:04 +07:00
d0e6bb269f
Use the system errno's on nrf
2018-06-02 12:55:07 -04:00
d02899f822
Add gamepad_singleto to root pointers for the nrf port
2018-05-30 23:11:23 +02:00
6d4a2f5524
Merge branch 'master' into usbboot
2018-05-17 15:23:45 +07:00
52ebfd07a5
update nrfutil to 0.5.2d with singlebank option
2018-05-17 15:20:07 +07:00
78f806c891
Added board specific READMEs
2018-05-15 22:42:27 +02:00
53593d1315
fix #809
...
define CIRCUITPY_BOOT_OUTPUT_FILE will cause mp_hal_stdout_tx_strn() to
invoke before serial_init() is called. Solution is skipped output to
serial if it is not inited.
2018-05-15 18:40:49 +07:00
05f36ebeb1
update the bootloader hex for feather52840
2018-05-15 16:06:03 +07:00
dadf831fe9
Merge branch 'usbboot' of github.com:microbuilder/circuitpython into usbboot
2018-05-15 13:33:53 +07:00
5365e51e39
Merge branch 'master' into usbboot
2018-05-15 13:29:25 +07:00
d6c26942a5
add timeout keyword to I2C - for bitbangio - ignored for busio
2018-05-13 21:54:44 -04:00
ce5eae1c76
Merge pull request #761 from jepler/nrf-modules
...
nrf: Enable binascii, hashlib modules
2018-05-11 19:40:45 -07:00
471fdae993
nrf: Enable binascii, hashlib modules
...
These modules would be very handy to have in order to implement a
more robust replacement for ampy. It costs around 2KiB of text and
no data or bss.
'binascii' has base64 encoding, which can be used to create a fully
8-bit-clean transport above the slightly cooked serial connection of
these boards.
'hashlib' is a bit less critical, but I have found it handy to
be able to robustly checksum remote files.
I see this as only being useful on ports which don't have USB block
device support, so atmel-samd doesn't need it. These modules are
already on esp8266 so I think nrf52 seems like the only one that
needs it.
2018-05-11 07:41:09 -05:00
2acd5d88b6
nrf52: enable framebuf module
...
Closes : #656
2018-05-10 18:37:08 -05:00
b617271191
Update mpconfigport.h
...
comment out define of CIRCUITPYTHON_BOOT_OUTPUT_FILE for NRF52 -- it does not work properly
2018-05-07 08:59:24 -04:00
d0e00d7fbe
Added built to example
2018-04-23 20:01:53 +02:00
0de8697315
Added note on USB CDC bootloader
2018-04-23 19:58:29 +02:00
ce9f05f91b
add missing files
2018-04-24 00:51:44 +07:00
50e7a4caa8
add bootloader hex
2018-04-24 00:19:04 +07:00
926849d7a8
don't use python nrfutil on windows, it doesnt work :/ tested feather52 makefile on windows/mingw
2018-04-13 14:00:20 -04:00
ce6b94f5e2
deal with spaces in directories
2018-04-12 21:43:23 -04:00
5f98953ed8
esp8266 and nrf: raise NotImplementedError
2018-04-10 12:08:41 -04:00
6ee573c7c9
Merge branch 'master' into super_status
2018-03-30 14:27:39 -05:00
abec199c19
Enable high-quality float hash
...
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.
Closes : #704
2018-03-27 21:56:30 -05:00
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis
...
Remove 'O', 'P' support in arrays
2018-03-26 20:01:34 -04:00
355bf8b553
Conditionally compile out nonstandard array/struct typecodes
...
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
2018-03-26 18:13:49 -05:00
c0029e1d97
Don't lose half of the processor's serial number
...
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
2018-03-25 13:01:04 -05:00
8c9cc6b7c0
nrf: changed Status to Runtime; instituted runtime singleton
2018-03-10 01:07:17 +00:00
5f101f3535
Add dummy UART implementation to nrf so it builds with UART turned on. Also add OneWire.
2018-02-21 22:53:17 -05:00
5de8df7997
added Status submodule to ports/nrf/common-hal/supervisor; issue #544
2018-02-19 22:27:16 +00:00
fce0b0858f
Removed leftover build option
2018-02-15 21:46:14 +01:00
10497d1db0
Update for style consistency
2018-02-15 21:44:05 +01:00
6544f4cb5c
Cleanup minor typos
2018-02-15 21:42:24 +01:00
da15053e0a
Fixed pin P0_00
2018-02-15 21:41:21 +01:00
d4356f9416
Added second 'P0_00'
2018-02-15 17:00:58 +01:00
cd7baed14d
Added note nrfutil and flashing
2018-02-15 16:00:34 +01:00
70596b6641
Added note on MSDDisable
2018-02-15 15:51:10 +01:00
f989db25b5
more bootloader feather52840 update
2018-02-15 21:43:27 +07:00
2e0edd5a63
Merge branch 'nrf52840' of github.com:microbuilder/circuitpython into nrf52840
2018-02-15 15:19:47 +07:00
2c9cd38547
update bootloader for feather52840
2018-02-15 15:12:30 +07:00
0981c579f0
Fixed pin names
2018-02-13 18:26:28 +01:00
b65e97bdb3
Update pin names
2018-02-13 18:17:31 +01:00
5160dda473
Merge branch 'master' into nrf52840
2018-02-13 18:13:47 +01:00
7b1cc9985b
Merge branch 'master' of github.com:adafruit/circuitpython
2018-02-13 18:11:20 +01:00
fac488fbf8
Merge pull request #617 from arturo182/nrf_gpio_cleanup
...
nrf: Change pin names on DKs to match silkscreen
2018-02-13 17:54:25 +01:00
283be4f58e
Added note on installing nrfutil
2018-02-13 11:55:24 +01:00
7b6d1052d9
Improved README
2018-02-13 11:50:51 +01:00
6a8bafc91b
Updated FATFS to 256KB
2018-02-13 11:50:29 +01:00
fc28fc4f0b
Added notes on flashing bootloader
2018-02-13 11:26:10 +01:00
4745272d6c
Added feather52840 readme
2018-02-13 09:34:09 +01:00
76eacad27b
Updated board detection macro
2018-02-13 08:52:17 +01:00
9f1cd41d77
Update to S140
2018-02-13 08:44:35 +01:00
d2b8ae66cb
Update mpconfigboard.h
2018-02-13 08:42:44 +01:00
59f25fb7a5
Update to S140
2018-02-13 08:40:40 +01:00
3a54a67f3d
add 52840 serial bootloader
2018-02-13 13:32:47 +07:00
3bb45511fa
add feather52840 board
2018-02-13 12:26:34 +07:00
7579057ee2
nrf: Use -O1 for debug builds
...
While O0 is great for debugging, the produced binary doesn't fit on the
feather52 anymore.
2018-02-12 22:50:07 +01:00
9962ea6449
nrf: Change pin names on DKs to match silkscreen
...
Quite a big revamp of the make-pins script, it is now used on each
build to generate the pin files, so the static ones are not needed
anymore.
2018-02-12 22:41:19 +01:00
hathach
Scott Shawcroft
Dan Halbert
Pierrick C
ladyada
Egor Leonenko
Scott Shawcroft
arturo182
jerryneedell
Matt Wozniski
Radomir Dopieralski
Kevin Townsend
Jeff Epler
Jeff Epler
Kevin Townsend
sommersoft
sommersoft