Dan Halbert
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
wallarug
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
KalbeAbbas
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
brentru
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
brentru
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
ladyada
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
ladyada
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f
wip
2019-10-28 18:15:02 -04:00
ProductDev
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
Chris Osterwood
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
wallarug
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
wallarug
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
wallarug
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
wallarug
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
Kattni Rembor
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
Radomir Dopieralski
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
Scott Shawcroft
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
Scott Shawcroft
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
Scott Shawcroft
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
Scott Shawcroft
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
Scott Shawcroft
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
Scott Shawcroft
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
Scott Shawcroft
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
Scott Shawcroft
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
Scott Shawcroft
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
Dan Halbert
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
Dave Astels
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
Dan Halbert
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
brentru
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
brentru
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
Chris Osterwood
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
brentru
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
brentru
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
Scott Shawcroft
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
Scott Shawcroft
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
Scott Shawcroft
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
wallarug
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
wallarug
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
Keith Packard
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
Keith Packard
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
Keith Packard
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
Keith Packard
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
Keith Packard
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
wallarug
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
wallarug
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
wallarug
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
wallarug
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
wallarug
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
sommersoft
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
wallarug
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
wallarug
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
wallarug
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
wallarug
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
wallarug
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
wallarug
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
wallarug
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
Scott Shawcroft
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
Scott Shawcroft
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
Scott Shawcroft
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
Scott Shawcroft
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
Scott Shawcroft
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
Kattni Rembor
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
Kattni Rembor
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
jandjstudios
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
Chris Osterwood
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
