5aa3e3eabb
samd/peripherals: update
2019-12-24 09:36:19 -06:00
b06057395b
Update PewPew M4
...
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
2019-12-23 18:37:36 +01:00
f60b6481e0
Turn off `gamepad` on cpx crickit
2019-12-20 12:14:27 -08:00
b859e2b710
Remove `re` from CPX Displayio build to make space.
2019-12-20 11:43:56 -08:00
d31a387ace
circuitplayground_express_displayio: reduce inlining to make .ko translation fit
2019-12-19 16:11:29 -06:00
16688180c6
add-ndbit6
2019-12-19 07:17:43 -07:00
81581b345c
Increase CPX stack size slightly
2019-12-16 17:25:22 -05:00
89ed64157d
Merge branch 'master' into master
2019-12-16 13:25:44 +05:00
87dc9bee8b
Update mpconfigboard.mk
2019-12-16 12:25:51 +05:00
6f6d6c01ab
Update mpconfigboard.mk
2019-12-16 12:18:16 +05:00
e11fabd5e0
moved nrf internal filesystem to just below bootloader
2019-12-12 14:57:23 -05:00
ae64a669dd
address review comments
2019-12-11 15:43:06 -05:00
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
a08d9e6d8e
audiocore: Add MP3File using Adafruit_MP3 library
2019-12-10 14:03:06 -06:00
1905d0746d
samd: neopixel: Fix neopixels after #2297
...
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.
This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)
Testing performed on a Metro M4:
* measured timings using o'scope and found all values within
datasheet tolerance.
* Drove a string of 96 neopixels without visible glitches
* on-board neopixel worked
Testing performed on a Circuit Playground Express (M0):
* Color wheel code works on built-in neopixels
* Color wheel code works on 96 neopixel strip
As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)
Closes : #2297
2019-12-07 19:19:45 -06:00
d628d2a261
atmel-samd working
2019-12-06 15:18:20 -05:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
fce81e6868
Merge pull request #2297 from jepler/tick-refactor
...
Call background tasks only once per ms
2019-12-02 16:45:51 -08:00
002f5c0f1c
samd: trinket_m0: make board fit again
2019-12-02 08:25:48 -06:00
899202aca7
Merge branch 'master' into gcc9
2019-12-02 07:27:03 -06:00
95d9c49e43
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-29 11:27:09 -06:00
d843156a5e
samd: Consolidate small build optimization flags
...
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
2019-11-29 10:51:16 -06:00
dd6dfeb30a
Squeeze pyruler zh_Latn_pinyin
2019-11-27 14:47:35 -05:00
b32a9192df
make UART.write be blocking on SAMD; add timeout property
2019-11-27 13:05:29 -05:00
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master
...
Add shIRtty board
2019-11-26 15:23:56 -05:00
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name
...
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 15:17:14 -05:00
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 10:59:12 -08:00
2647ea0754
fix: disable touchio to save some space
2019-11-26 19:26:18 +01:00
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space
...
Once we use PixelBuf, the library will be much smaller.
2019-11-26 09:31:44 -08:00
82f55dc046
atmel-samd: reduce inlining on constrained boards again
...
pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0
now has just 76 bytes flash available.
2019-11-26 08:50:55 -06:00
3ed6de7baf
atmel-samd: reduce inlining on pyruler again
...
By tweaking the optimizer flags further, this build also fits
2019-11-26 08:50:55 -06:00
2e4a6b94e7
atmel-samd: get most constrained m0 builds to work again
...
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
2019-11-26 08:50:45 -06:00
11dc572bce
feature: our own PID - thanks @ladyada
2019-11-25 21:56:42 +01:00
fc71ed9789
add shirtty board - hackaday supercon 2019 addon
2019-11-25 17:44:41 +01:00
1ccb7b4c5e
cosmetic commit, mostly to re-run
2019-11-22 16:30:10 -05:00
13375d16f1
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk
2019-11-22 15:44:51 -05:00
77b78d7fb9
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-22 14:28:51 -06:00
e18d3e0f76
Merge branch 'master' into m4-network-ps2io
2019-11-22 15:02:52 -05:00
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
40a47d41df
samd: background: Allow monitoring time taken in background task
...
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
2019-11-18 11:01:24 -06:00
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
81223c76bd
revert error
2019-11-15 13:04:25 -05:00
2c6781f74d
move neopixel_in_use flag to shared-bindings
2019-11-15 12:59:52 -05:00
de5691acf5
Add never_reset and reset to pin common hal, adjust files
2019-11-15 12:47:00 -05:00
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
c7195c4bc5
Allow boards to enable the `micropython.native` decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c
...
nrf: allocate two I2C on CPB
2019-11-03 13:15:36 -08:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
1505da784f
wip
2019-10-28 18:15:02 -04:00
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
7aefcc449a
Add an alternative way to number the USB endpoints
...
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
2019-10-07 12:31:42 +02:00
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
b7598f7058
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-09-19 14:20:28 -07:00
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51
2019-09-19 12:21:54 -07:00
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
dffedd7c86
samd: peripherals: update submodule reference
2019-09-16 21:48:31 -05:00
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
61698eb5d8
AnalogOut / AudioOut: Copy settings from Arduino
...
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.
Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).
A fresh clock (6) is allocated for the new 12MHz clock. This matches
the Arduino value, though not the GCLK index.
Modify other settings to more closely resemble Arduino.
In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.
This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic
Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
2019-09-15 11:30:49 -05:00
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
b8200d7295
fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use
2019-09-09 23:17:52 -04:00
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking
...
Samd dma tracking
2019-09-05 11:27:59 -07:00
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4
...
Add support for PewPew M4 board
2019-09-05 11:26:47 -07:00
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
f3af2a6fb7
Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac
2019-09-04 21:56:13 -04:00
195de97c67
use only one endpoint pair for MSC except on SAMD21
2019-09-04 21:45:16 -04:00
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden
...
Add .hidden to TileGrid and Group
2019-09-04 15:48:00 -04:00
7951646b9a
Disable bitbangio on uGame10
2019-09-04 11:49:47 -07:00
c4d6f4f536
disable 'audiomixer' for all M0 boards
2019-09-01 17:39:20 -05:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
30a9346373
samd: audio_dma: Track channel allocation
...
Previously, we depended on allocated channels to always be
"dma_channel_enabled". However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.
((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)
Therefore,
* Add audio_dma_{allocate,free}_channel.
* audio_dma_free_channel implies audio_dma_disable_channel
* track via a new array audio_dma_allocated[]
* clear all allocated flags on soft-reboot
* Convert find_free_audio_dma_channel to audio_dma_allocate_channel
* use audio_dma_allocated[] instead of dma_channel_enabled() to check
availability
* remove find_free_audio_dma_channel
* For each one, find a matching audio_dma_disable_channel to convert
to audio_dma_free_channel
Closes : #2058
2019-08-28 17:00:22 -05:00
0b00787b4d
samd: AudioOut: ensure stopped before deinit
...
.. otherwise, a sequence like
>>> a = audioio.AudioOut(board.A0)
>>> a.play(sample, loop=True)
>>> a.deinit()
would potentially leave related DMA channel(s) active.
2019-08-28 16:43:55 -05:00
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
696117b048
disable audiomixer on boards it doesn't fit on
2019-08-25 14:53:34 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
70680d5b22
EPaper displays work mostly.
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area
...
To displayio.Display: expose fill_area and add a property for rotation
2019-08-21 23:48:21 -07:00
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
6e3a6d0ac5
typo in IncrementalEncoder.c
2019-08-20 16:23:17 -04:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano
...
Add PyPortal Titano
2019-08-12 16:01:10 -07:00
d9ee2d28a0
atmel-samd: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
33b949abfa
samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines
...
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background(). This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
2019-08-07 21:29:24 -05:00
500d1bb168
samd: audio_dma.c: Remove exceptions, just return early
...
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
2019-08-07 20:20:36 -05:00
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
39c64bf83c
samd: audio_dma_stop: don't free invalid channel
...
audio_dma_stop can be reached twice in normal usage of AudioOut.
This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number. This also prevents
the event channel from being disabled twice.
The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
2019-08-06 22:00:31 -05:00
8b717955ba
samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking
...
It turns out the "disable" error will fire in practice, we'll fix that
next.
2019-08-06 22:00:31 -05:00
Jeff Epler
Radomir Dopieralski
Scott Shawcroft
Jeff Epler
ndgarage
Dan Halbert
KalbeAbbas
Scott Shawcroft
Dan Halbert
Thea Flowers
Thomas Sarlandie
wallarug
Cedar Grove Maker Studios
Hierophect
KalbeAbbas
☒ Bjarke Gotfredsen
brentru
ladyada
Thea Flowers
ProductDev
Kamil Tomaszewski
Chris Osterwood
arturo182
Melissa LeBlanc-Williams
Kattni Rembor
sommersoft
Dave Astels