Commit Graph

483 Commits

Author SHA1 Message Date
Jeff Epler fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
Jeff Epler 57fde2e07b sdcardio: implement new library for SD card I/O
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot

This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
Scott Shawcroft ed6e81d688
Switch SPI to polling DMA and enable displayio 2020-06-24 13:10:08 -07:00
Scott Shawcroft a26102607e
Add UART support 2020-06-24 12:47:58 -07:00
Jeff Epler a580f0f1c4 _pew: move to common-hal
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10).  Move it.

There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
Dan Halbert c91435eff2 remove debugging prints 2020-06-15 18:10:34 -04:00
Dan Halbert 81896930c7 Fix ScanEntry prefix matching for all 2020-06-15 16:35:51 -04:00
DavePutz 058c16e98c
Issue #3014 - refresh after changing to transparent
Adding     self->needs_refresh = true; in common_hal_displayio_palette_make_opaque() and common_hal_displayio_palette_make_transparent()
2020-06-10 17:11:28 -05:00
Diego Elio Pettenò dd5d7c86d2 Fix up end of file and trailing whitespace.
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
Jeff Epler 0722dafc24 audiomixer: Fix garbled playback when voice 0 is stopped, audio pops
There were two main problems
 - word_buffer was being filled as though with unsigned samples,
   but during mixing all samples are kept in signed mode
 - If the first buffer was stopped, the voices_active flag got set
   anyway, even though the output buffer wasn't initialized yet,
   so the samples were mixed with indeterminate data

We also cover the case where no buffer was playing, and ensure
the output buffer is filled.

This now works much better.  Tested on neotrellis m4 playing back
4 mp3 streams at a time in signed-16, 22050Hz
2020-06-01 19:14:38 -05:00
Roy Hooper dd980249c6 Allow setting RGBW pixels with RGB tuples 2020-05-24 20:35:13 -04:00
George Waters c592a2b4db
Simplify pixelbuf set_pixels function 2020-05-22 21:19:17 -04:00
George Waters f078055f59
Use mp_int_t for setting pixelbuf slice indices
When handling negative steps, start and stop need to be mp_int_t so they
can be checked against a potential negative value during the for loop
used to set the slice values.
2020-05-22 16:28:09 -04:00
George Waters 16ffc731f3
Implement negative step for pixelbuf slices 2020-05-21 21:57:45 -04:00
Scott Shawcroft 2c2b53303d
Merge pull request #2837 from k0d/serial-debug
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
Mark Olsson 007c92ee6a Enable showing the console on a debug uart 2020-05-19 02:02:52 +02:00
warriorofwire dde66cadde remove a duplication in polygon.c 2020-05-18 13:32:06 -07:00
warriorofwire 4bbb80e31a vectorio: speed up polygon
This change takes polygon from 126k pixels per second fill to 240k pps fill
  on a reference 5 point star 50x66px polygon, updating both location and shape
  at 10hz.  Tested on an m4 express feather.

As a curiosity, the flat-out fill rate of a shape whose get_pixel is `return 0;`
  fills just shy of 375k pixels per second.
2020-05-18 13:32:06 -07:00
Jeff Epler fbf052bb27 Gamepad & GamepadShift: Enable ticks while object exists
Otherwise, button presses might not be noticed.
2020-05-13 10:14:37 -05:00
warriorofwire fd94c08cf4 add performance measurement to VectorShape 2020-05-12 11:49:15 -07:00
warriorofwire 6aa9709d98 make Circle return explicit 2020-05-12 11:47:19 -07:00
warriorofwire 32f85f7a44 vectorio: fix up Rectangle
* Fix drawing 1 pixel too large
* Need to pad dirty area to ensure removed shapes are fully removed
2020-05-10 16:21:07 -07:00
warriorofwire 58c8e00745 vectorio: clean up after group removal
VectorShape tells the Group to redraw whatever it left behind when it is removed now.
2020-05-10 15:36:23 -07:00
warriorofwire 6660311a96 vectorio: respect display transpose and mirror.
VectorShape now just uses the Group's and Display's absolute transforms.
2020-05-10 14:18:13 -07:00
warriorofwire 4086600b61 vectorio: switch per-shape transform to Display
Rather than maintain a transform per-shape, we'll just use whatever
  settings are on the Display.  Currently only transpose is done.
2020-05-09 22:15:51 -07:00
warriorofwire 206d0e598a Add vectorio: for drawing shapes
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
2020-05-09 15:38:22 -07:00
Sean Cross b168784fa0 aesio: add basic AES encryption and decryption
This adds initial support for an AES module named aesio.  This
implementation supports only a subset of AES modes, namely
ECB, CBC, and CTR modes.

Example usage:

```
>>> import aesio
>>>
>>> key = b'Sixteen byte key'
>>> cipher = aesio.AES(key, aesio.MODE_ECB)
>>> output = bytearray(16)
>>> cipher.encrypt_into(b'Circuit Python!!', output)
>>> output
bytearray(b'E\x14\x85\x18\x9a\x9c\r\x95>\xa7kV\xa2`\x8b\n')
>>>
```

This key is 16-bytes, so it uses AES128.  If your key is 24- or 32-
bytes long, it will switch to AES192 or AES256 respectively.

This has been tested with many of the official NIST test vectors,
such as those used in `pycryptodome` at
39626a5b01/lib/Crypto/SelfTest/Cipher/test_vectors/AES

CTR has not been tested as NIST does not provide test vectors for it.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 17:40:06 +08:00
hierophect c311b5c002
Merge pull request #2842 from hierophect/stm32-h7-displayio
STM32: Add displayio to F7/H7
2020-05-05 12:37:08 -04:00
Dan Halbert bae7a5e433 make translate again 2020-05-04 17:26:59 -04:00
Lucian Copeland 61b0994631 Fix flag typo 2020-05-01 14:46:06 -04:00
Lucian Copeland 4f71bd295d Make PulseIO optional within DisplayIO 2020-04-30 14:47:50 -04:00
Dan Halbert fbc8719fad ringbuf tested 2020-04-21 22:40:12 -04:00
Dan Halbert 77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert 38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Scott Shawcroft bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
Jeff Epler 9bfe6b7197 framebufferio: update copyright information 2020-04-17 18:44:07 -05:00
Jeff Epler 5fcc6d6286 RGBMatrix: finish renaming from Protomatter
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
Jeff Epler 57ce2d1f41 framebufferio: get width, etc., from protocol, not object property 2020-04-17 18:43:57 -05:00
Jeff Epler 3d6258f63d Rename Protomatter -> RGBMatrix
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
Jeff Epler 64c3968a2e protomatter: move get_width/height to common_hal 2020-04-17 18:43:57 -05:00
Jeff Epler a32337718d Rename _protomatter -> protomatter
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
Scott Shawcroft abd340a8e4
Remove tick.h from merged file. 2020-04-16 11:35:19 -07:00
Scott Shawcroft b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler d8362ef654 displayio: swap colors in palettes too
.. change the in-rom palette to be in RGB565 order
2020-04-14 18:25:00 -05:00
Jeff Epler 880fff80e9 protomatter: Respond to review comments
- rename oe_pin -> output_enable_pin
 - improve and reorganize docstrings
 - rename swapbuffers->refresh
 - rename "paused" -> "brightness", change semantics slightly
 - common_hal several functions
 - clarify why the common_hal routines can't be used directly in the
   protocol's function pointers
 - whitespace cleanups
 - remove prototypes for nonexistent functions
2020-04-14 18:24:59 -05:00
Jeff Epler ba20bc8b43 framebufferio: move backlight down to the underlying framebuffer 2020-04-14 18:24:58 -05:00
Jeff Epler e4c6b241a9 protomatter: Use low end of supervisor heap
Per @tannewt, this area "sees more churn", so it's probably the right
choice here
2020-04-14 18:24:58 -05:00
Jeff Epler 5dae23c0e7 protomatter: release the protomatter object during release_displays() 2020-04-14 18:24:58 -05:00
Jeff Epler 0ca270172f protomatter: allocator: Never supervisor-alloc while gc available
This may have been contributing to fragmentation of the supervisor
heap
2020-04-14 18:24:58 -05:00
Jeff Epler baf04b7738 FramebufferDisplay: remove probably not needed constructor arguments 2020-04-14 18:24:58 -05:00