Commit Graph

109 Commits

Author SHA1 Message Date
Scott Shawcroft 40118bcf57
Add `board_deinit` for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
Christian Walther c7404a3ff8 Add movable allocation system.
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.

By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
Scott Shawcroft 2bc40bcadf
Remove readreq when changing continuous 2020-10-13 10:15:34 -07:00
Scott Shawcroft 379e73af2e
Finer grained, per port tick locking
Fixes #3504 hopefully.
2020-10-12 18:43:21 -07:00
Scott Shawcroft 3ccf644dd0
Fix autoreload on SAMD21
The issue was that a time.sleep() would set the RTC wake up
further into the future even if we wanted to tick every ms. Ticking
every ms is used to time the autoreload delay and without it,
autoreload doesn't work.

Fixes #3528
2020-10-09 12:53:00 -07:00
Jeff Epler e066448e36 atmel-samd: add same51, feather_m4_can
This is compile-tested, and requires updates in the related submodules:

https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37

This should not be merged until those can also be merged.
2020-09-08 13:06:45 -05:00
Scott Shawcroft 6857f98426
Split pulseio.PWMOut into pwmio
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.

Fixes #3211
2020-08-18 13:08:33 -07:00
Dan Halbert e5e132a364 add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT 2020-07-28 11:49:54 -04:00
Jeff Epler 6160d11c5a supervisor: factor out, Handle USB via background callback 2020-07-15 11:49:44 -05:00
Scott Shawcroft 51c888d4be
Merge pull request #3003 from Flameeyes/master
License tagging according to REUSE specifications.
2020-07-13 16:28:49 -07:00
Radomir Dopieralski e0733d153e SAMD: configurable brownout, separate the variables 2020-07-09 12:17:07 +02:00
Radomir Dopieralski 83a27edd20 SAMD: make the brownout detection level configurable per board
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.

In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
2020-07-08 19:59:53 +02:00
DavePutz 0932b64ae7
Correct for SAMD51 build 2020-07-06 23:25:33 -05:00
DavePutz 1b3cb17abd
Corrected file for SAMD51 build 2020-07-06 21:47:11 -05:00
DavePutz ab4a453006
Made requested changes 2020-07-06 21:40:38 -05:00
Diego Elio Pettenò 34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
DavePutz ac33c3fe2c
Implementation of continuous synchronization of RTC during pulsein
Flags and code to implement continuous synchronization of RTC during pulsein
2020-07-04 21:17:19 -05:00
Jeff Epler da733c01da atmel-samd: Add support for SAM E54 family MCUs
This introduces the new macro SAM_D5X_E5X.  This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
2020-06-23 10:41:48 -05:00
Jeff Epler a580f0f1c4 _pew: move to common-hal
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10).  Move it.

There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
hathach e79340601f fix racing issue for SAMD when executing WFI 2020-05-25 20:51:02 +07:00
Scott Shawcroft 6aaab005c5
Initial ESP32S2 port.
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
Scott Shawcroft f7303e6bd0
Merge pull request #2754 from maholli/non-standard-nvm
Add non-standard nvm to QSPI for external flash support
2020-05-12 11:56:33 -07:00
DavePutz 407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset()
Added an #if CIRCUITPY_RTC check  for platforms supporting RTC
2020-05-11 12:03:44 -05:00
DavePutz 2ddfab315c
Added call to rtc_reset() in rtc_init()
Fix for issue #2872. The rtc_time_source had not been initialized; causing a time.time() call to fail.
2020-05-11 11:31:18 -05:00
Dan Halbert c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Max Holliday 6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Scott Shawcroft 755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Max Holliday 86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Scott Shawcroft 7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
Scott Shawcroft d0a25ca9ac
Tweaks based on dhalberts feedback 2020-04-08 10:49:46 -07:00
Max Holliday a53a26be70 missed a debug flag 2020-04-07 18:24:53 -07:00
Max Holliday 826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft e99cf6e441
Rework sleep timing
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
2020-04-03 18:07:56 -07:00
Scott Shawcroft d9e68156b2
fix up SAMD21 sleep 2020-03-17 12:10:35 -07:00
Scott Shawcroft 7100d5e485
Fix autoreload and ticks in general 2020-03-13 16:13:24 -07:00
Scott Shawcroft 48b5f2a384
Initial work on SAMD 2020-03-13 11:16:41 -07:00
hierophect 898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland 100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Scott Shawcroft 1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Dan Halbert d628d2a261 atmel-samd working 2019-12-06 15:18:20 -05:00
Dan Halbert 40434d6919 wip 2019-12-05 22:45:53 -05:00
Dan Halbert 1505da784f wip 2019-10-28 18:15:02 -04:00
Kamil Tomaszewski 96756b3945 Add functions to get top and limit stack 2019-10-18 11:04:45 +02:00
Dan Halbert e2a4c76a37 make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00
Elvis Pfützenreuter 1da8d4b4da Add PS/2 support -- ps2io module 2019-06-04 18:05:46 -03:00
Scott Shawcroft 0e03a321e4
Fully split gamepadshift from gamepad 2019-04-16 10:11:54 -07:00
Scott Shawcroft ceb6f2e4fc
Rework flash flush so it preserves the cache
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
Scott Shawcroft 37e10d4a81
Be more careful when initing the board outside the VM. 2019-03-12 11:18:29 -07:00
Radomir Dopieralski 263134dcd3 Add more guards for CIRCUITPYTHON_PEW 2019-03-01 18:50:00 +01:00
Radomir Dopieralski 89b2788d11 Apply review fixes:
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00