df48312ce7
nRF: PWMOut: At deinit, make pin available again
...
Closes : #2146
2019-09-11 20:09:38 -05:00
7b9dfc9952
nrf: i2s: tune audio buffering
...
.. based on some tasks I found that caused stuttering:
# Test SD and printing
while True: os.listdir('.')
# Test bulk I/O
while True: len(open('somefile.wav', 'rb').read())
Each of these tasks *WAS* worse and I am improving them in a separate
PR by adding RUN_BACKGROUND_TASKS to them.
2019-09-09 20:13:12 -05:00
c66f5a8536
nrf: i2s: rewrite without 'goto'
2019-09-09 19:26:18 -05:00
fe9605a6a3
nrf: i2s: Comment this slightly tricksy code
2019-09-09 19:25:52 -05:00
ccf08aa3df
nrf: I2SOut: deal more gracefully with errors from the sample
2019-09-08 21:59:07 -05:00
e890bc8efe
nrf: Makefile: sensible flags for debugging
...
This enables the highest level of debug symbols, and all optimizations
except lto that do NOT interfere with debugging, in the view of the gcc
maintainers.
2019-09-08 21:07:00 -05:00
f38ee42874
nrf: Add i2s audio output
...
Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC.
I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal
bit rates. With this setup, all the 11025Hz samples sound good.
I tested play, pause, and loop functionality.
During some runs with 22050Hz samples, there were glitches. However,
these may have only occurred during runs where I had set breakpoints
and watchpoints in gdb.
I also tested with a MAX98357A I2S amplifier. On this device, everything
sounded "scratchy". I was powering it from 5V and the 5V rail seemed
steady, so I don't have an explanation for this. However, I haven't
tried it with a SAMD board.
2019-09-08 16:46:35 -05:00
3c22c690c8
CPB A1 pin mapping wrong; remove A7
2019-09-06 14:17:11 -04:00
b1c3d47413
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-09-01 21:16:12 -05:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
7a64af9280
rename bleio module to _bleio
2019-08-29 18:44:27 -04:00
b11b7916fd
address minor issues: typos, make translate, and sphinx
2019-08-29 17:58:21 -04:00
f17059b10b
another API rework: less abstraction leakage
2019-08-28 23:15:22 -04:00
19c59b41ed
bleio: API change to create and connect related objects simulatenously: no orphan bleio objects
2019-08-28 16:15:09 -04:00
a72bcab0fd
Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp
2019-08-28 16:09:18 -04:00
0364f1dc85
remove some debugging prints
2019-08-26 08:17:59 -04:00
76446f634b
BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding
2019-08-25 21:38:13 -04:00
2e4b687ba5
enable audiomixer on nrf
2019-08-25 07:32:48 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
2497cbe186
Fix nrf builds
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
d37dd4d758
Updated ParallelBus implementation in nrf port
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
acc6df4959
merge similar fix in
2019-08-22 01:29:34 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
389e7cc35d
Merge pull request #2072 from bmeisels/nrf-no-crystal-support
...
Add support for nrf boards that don't have an external crystal
2019-08-21 13:01:26 -07:00
fe2ec6c887
Add support for nrf boards that don't have an external crystal
2019-08-20 23:30:21 +03:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
44b28d1187
update tinyusb to 00c440cb
2019-08-19 19:42:45 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
26a05d01dc
Merge remote-tracking branch 'origin/master' into nrf-pdm-audioin
2019-08-18 21:30:14 -05:00
912fd7759d
nrf: PDMIn: Implement
...
So far, this supports only 16kHz and 16-bit samples with a fixed gain.
This is enough to support the basic functionality of e.g., sensing
ambient audio levels.
2019-08-18 15:58:04 -05:00
79f8a85786
nrf: stub out audiobusio.PDMIn, audiobusio.I2SOut
2019-08-18 15:55:57 -05:00
3f7321af00
Merge pull request #2031 from jepler/nrf-lto
...
Enable link-time optimization for nrf targets
2019-08-18 12:35:26 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
...
BLE: more features
2019-08-16 14:50:00 -07:00
630c92392a
address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings
2019-08-16 15:18:53 -04:00
5877bd6036
CPblue initial definition
2019-08-13 22:12:36 -04:00
11dd3a260e
nrf: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
1570ef2dd4
specifying attribute length; fix up value setting
2019-08-07 23:49:09 -04:00
d047b73a9c
fix newly-introduced bugs; UART client/server working again
2019-08-07 11:10:21 -04:00
d74c8b9425
WIP: more Descriptor work; refactor gattc/gatts read/write
2019-08-06 22:55:25 -04:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
59efce3035
Merge pull request #2039 from dhalbert/metro-52840
...
Metro nRF52840 rev A defn; remove '#define FEATHER52840' from mpconfigboard.h
2019-08-05 18:48:36 -07:00
b675a27e16
Merge pull request #2000 from jepler/nrf-pwm-audio
...
Implement PWM audio out for the nrf port
2019-08-05 17:26:27 -07:00
c56566179a
Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files
2019-08-05 18:10:27 -04:00
b67d04a5b1
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 16:35:44 -04:00
77bc1ba03e
nrf: PWMAudioOut: Remove the need to wait in "pause"
...
The original formulation was because I saw the need to avoid a transition
from playing to stopped exactly when a resume was taking place. However,
@tannewt was concerned about this pause causing trouble, because it could
be relatively lengthy (several ms even in a typical case).
After reflection, I've convinced myself that updating the registers
in this order in resume avoids a window where a "stopped" event can
be missed as long as the shortcut is updated first.
Testing re-performed: pause/resume testing of looped RawSample and
WaveFile audio sources.
2019-08-03 08:19:25 -05:00
4bae29b925
nrf: enable link-time optimization
...
Testing performed: installed freshly built .uf2 on a Particle Xenon.
Checked that circuitpython still starts.
Checked that the size of all .uf2 files for nrf builds are plausible.
Aside from memory savings, the performance of Python code (pystone)
increased by about +14%.
However, this adds about 12-16 seconds to each nrf build.
Timings & Sizes (build system: i5-3320M, -j5 parallelism on 4 threads):
Before:
$ make -j5 BOARD=particle_xenon
765004 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232076 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
68.54user 11.83system 0:34.34elapsed 234%CPU
pystones before: 570
After:
$ make -j5 BOARD=particle_xenon
804284 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232072 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
71.06user 11.77system 0:46.91elapsed 176%CPU
pystones after: 650
Timings on travis:
Before:
Build feather_nrf52840_express for pl took 55.79s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 3.18s and succeeded
After:
Build feather_nrf52840_express for pl took 62.72s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 19.10s
Closes : #1396
2019-08-02 20:59:47 -05:00
7ce3776b80
WIP: rework of Characteristic properties; enhance Descriptor; not tested
2019-08-02 17:57:31 -04:00
28b7cbfca6
nrf: Mark interrupt vectors as used
2019-08-02 07:53:35 -05:00
34e2bab96a
nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE
2019-08-01 18:53:07 -05:00
76f65ac694
Implement play/pause
...
.. and also incidentally fix a problem where a RawSample could only
be looped 131070 times.
2019-07-31 20:02:56 -05:00
91d791afd0
cleanup adapter.address; add uniquish suffix to BLE device name
2019-07-31 00:30:24 -04:00
83129b8c63
BLE: peripheral client pairing (not yet bonding); fix time doc formatting
2019-07-30 14:26:26 -04:00
b72352949b
PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_
2019-07-29 18:39:00 -04:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
a183425e00
ports/nrf: Implement audioio.AudioOut using PWM
...
This implements AudioOut, with known caveats:
* pause/resume are not yet implemented (this is just a bug)
* at best, the sample fidelity is 8 bits (this is a hardware limitation)
Testing performed:
My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected. It is powered from
VUSB.
I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive. This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270
Nothing about the code I've written should limit the usable pins.
All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
2019-07-26 07:57:11 -05:00
2bc704fe07
ports/nrf: factor out routines for allocating, freeing pwm channels
2019-07-26 07:52:37 -05:00
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup
...
Add STM32 Discovery F412ZG and F411RE support
2019-07-24 18:49:48 -07:00
c921f6637f
update tinyusb lib to 0.5.x
2019-07-24 16:46:31 +07:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
58630a844a
Add feature conditionals and clean up
2019-07-22 12:58:28 -04:00
e4d92a3aad
Fix incorrect preprocessor define NRFX_TIMER3/4
...
Should be NRF_TIMER3 and NRF_TIMER4
2019-07-22 20:07:05 +05:30
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
43e8a4110f
Add missing files for DigitalIO
2019-07-17 14:18:01 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
16ba035ba7
first commit, very crude
2019-06-28 15:36:08 -04:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
1356819de1
Handle None for BLE name; fix ScanEntry bug; compile issue
2019-06-17 23:16:40 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
9cceea0d68
nrf: fix internal flash writes
2019-03-18 09:11:40 -04:00
c4586c0531
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 08:31:03 -04:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
5ec92415b0
fix module weak links; add missing nrf features
2019-02-17 17:29:28 -05:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd.
2019-02-11 20:55:06 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
a51f2b0716
refactor nrfx from supervisor/usb.c
2019-01-30 22:30:23 +07:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
d1fb384a4a
update tinyusb, work better with sd
2019-01-29 21:03:18 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
91452ec9cb
Mention the MDK USB Dongle.
2019-01-15 21:24:36 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
ee410b2cf1
Merge branch 'master' into nrf52_pulsein
2019-01-10 10:54:40 +07:00
d3b8581ce0
fix merge conflicts; address some comments
2019-01-09 19:59:48 -05:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
d41ed768dc
Fix sphinx build issues; add better travis fold reporting; update author info
2019-01-09 16:22:19 -05:00
89af666093
fix sphinx complaint; more travis fold status reporting
2019-01-09 10:36:38 -05:00
f366e3feea
Merge branch 'master' into nrf52_pulsein
2019-01-09 20:39:35 +07:00
cfc4c8cbfa
minor clean up
2019-01-09 15:43:54 +07:00
db82160eef
fix pulsein incorrect compute
2019-01-09 15:15:30 +07:00
13d607698e
m_tx_in_progress might underflow (check on this)
2019-01-08 16:37:14 -05:00
50641c4152
remove debugging printf's
2019-01-08 15:52:21 -05:00
f66f55b4ed
add CharacteristicBuffer; UART seems to work!
2019-01-07 22:46:20 -05:00
215008f78c
clean up neopixel write !!
2019-01-08 00:21:31 +07:00
a77b2363ef
evt handler list bugs; unique evt handler names; remove uuid128_reference
2019-01-03 21:42:42 -05:00
8dea6f53bb
forgot to store data when reading a gatts value
2019-01-03 14:16:41 -05:00
87c6f33bcc
Broadcaster now takes whole packet. Also should be scannable
2019-01-01 14:11:59 -05:00
941ccf87c8
don't free event handler list manually; let gc do it
2018-12-31 09:02:43 -05:00
b6b5ed9c89
Remove nRF52832 support
2018-12-30 22:49:20 -05:00
1dc3957e72
LocalPeripheral is now Peripheral; more work on basic GATTS support; UART not working yet
2018-12-30 22:33:49 -05:00
ef39e72c7c
free event handlers on reset; fix typo in Broadcaster
2018-12-29 13:55:10 -05:00
de7cadb9b2
fix typos in internal_flash.c
2018-12-29 00:08:04 -05:00
145e110915
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-29 00:00:39 -05:00
4d1f0ec07b
Add Broadcaster. Reset correctly on reload.
2018-12-28 23:34:23 -05:00
6b0d93cea3
correct i2c max len
2018-12-28 21:14:27 +07:00
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits)
2018-12-28 16:30:11 +07:00
3ee766bc01
put received bytes to fifo when error
2018-12-28 01:05:30 +07:00
d092722ae8
fix #1407 keep receiving in case of error
2018-12-28 00:40:29 +07:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
f5b15c9b4d
Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev
2018-12-21 21:28:24 -05:00
0dfe2dbff0
return error status on more routines; minor simplification of freq setting
2018-12-21 12:30:54 -05:00
bce6d124af
Don't check for corrupt heap too early; Fix QSPI timing
2018-12-20 21:28:36 -05:00
6752266673
added pulsein using gpiote (gpio interrupt)
2018-12-18 22:05:17 +07:00
bfa66861ef
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-13 16:33:15 -05:00
b37b2fa7e7
overwrite old data if fifo is full
2018-12-13 23:56:06 +07:00
e136222ae2
use rbuf for busio uart
2018-12-13 23:48:53 +07:00
70939ad517
Merge pull request #1395 from jerryneedell/jerryn_cpython
...
enable MICROPY_CPYTHON_COMPAT
2018-12-11 10:54:17 -08:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
1dc4c4757e
touchio.TouchIn sensing working on a single pin! adafruit/circuitpython#1048
2018-12-11 14:33:35 +11:00
a90343022a
enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds
2018-12-10 16:35:40 -05:00
901db4797e
progress on NRF touchio.TouchIn #1048
2018-12-09 16:48:33 +11:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
a7a24096f4
bleio WIP: redo for more immutability; use sd_* routines for internal flash write
2018-12-07 16:52:47 -05:00
332ea8853f
Macro guard VDDH inclusion.
2018-12-06 16:38:14 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
125901e4e2
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-06 12:41:38 -05:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
jepler
Dan Halbert
sommersoft
Scott Shawcroft
Benny Meisels
Scott Shawcroft
Dan Halbert
jepler
hathach
Hierophect
Tavish Naruka
iot49
Nick Moore
Radomir Dopieralski
Damiano Mazzella
Jerry Needell
Kattni
Roy Hooper
Gregory P. Smith
dsiee