08b4a64bd2
Update the PID
2022-07-11 08:39:10 -07:00
be3482ff05
Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed
2022-07-11 16:51:06 +08:00
f22f4f896a
stm: Make family IDs consistent with TinyUF2
...
This should allow UF2 images for STM32F405 boards to be flashed by
TinyUF2.
2022-07-10 21:34:07 +02:00
a658007673
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:26 -07:00
22e061ba35
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:18 -07:00
98692150ac
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:12 -07:00
f464ec3047
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:02 -07:00
9d77a36fbf
update samd-peripherals submodule
2022-07-08 22:47:36 -04:00
bc14b7ad47
Fix the display on the esp box lite
2022-07-08 15:40:59 -07:00
2c7ad7a39f
make translate and pre-commit formatting fixes
2022-07-08 16:53:53 -04:00
3c093713dc
Merge branch 'esp_box_lite' of https://github.com/tannewt/circuitpython into esp_box_lite
2022-07-08 13:46:14 -07:00
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
d869b441f4
further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR
2022-07-08 15:27:00 -04:00
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
afbf4de071
Uncomment or remove debugging changes
2022-07-08 12:53:25 -04:00
c3cd32e773
CPU freq to 240 MHz, redo sdkconfigs
2022-07-08 10:50:00 -04:00
75208573f4
tweak sdkconfig; add temp logging to mp_make_function_from_raw_code
2022-07-08 09:53:29 -04:00
d3e1d1b104
Fix #6559
2022-07-07 19:42:11 -07:00
ab3e786611
disable additional module on matrixportal_m4
2022-07-07 20:00:12 -05:00
c4dfd8e30a
Fix default BOARD setting & messages
...
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
2022-07-07 17:17:15 -05:00
601eb91b89
Disable gifio on matrixportal to reclaim flash space
2022-07-07 17:00:00 -05:00
4e88d795e1
Thonny causing crash emitglue.c:199:
2022-07-06 23:01:19 -04:00
4c20b3cb63
Merge pull request #6564 from adafruit/7.3.x
...
7.3.x
2022-07-06 15:25:24 -04:00
d83720f659
Tweak display init
2022-07-05 17:02:52 -07:00
cd77517b2f
Add build for ESP32-S3 Box Lite
2022-07-05 16:35:42 -07:00
18d7165e0f
Merge pull request #6550 from crackmonkey/rp2040-wait-pin-bounds
...
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-05 12:56:14 -07:00
dce9396fe3
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-02 14:32:20 -07:00
07b2697ae3
WIP websocket to serial
2022-07-01 16:57:10 -07:00
c3cf9ba9ce
remove wifi max from sdkconfig
2022-07-01 14:50:47 -07:00
aaeda97818
update PHY section, correct name
2022-07-01 14:50:47 -07:00
aa53d36934
setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5
2022-07-01 14:50:47 -07:00
7e367eeb58
Update "D" mappings
2022-07-01 14:50:47 -07:00
d4b26daf1b
correct creator and creation IDs
2022-07-01 14:50:47 -07:00
6c7faf0eba
Change USB VID & PID to Creator and Creation IDs
2022-07-01 14:50:47 -07:00
3253ae2503
tested and corrected several pins
2022-07-01 14:50:47 -07:00
f10fa566aa
REPL works. Based on QTPYC3.
2022-07-01 14:50:47 -07:00
a3070f6c2a
Changes to Pin Mappings
2022-07-01 14:50:46 -07:00
b37236f83f
C3 does not have PSRAM
2022-07-01 14:50:46 -07:00
af629ab180
Add assumed PID value
2022-07-01 14:50:46 -07:00
c1e6003d26
remove comment that breaks {ID Checker
2022-07-01 14:50:46 -07:00
9bae8549c5
add UART RX TX to mpconfigboard
2022-07-01 14:50:46 -07:00
6763b7b968
add A5
2022-07-01 14:50:46 -07:00
bcf27e146b
fix build break and add io 20/21
2022-07-01 14:50:46 -07:00
dc1c86738a
Initial pin mapping pass
2022-07-01 14:50:46 -07:00
fd4695d0f2
Gettting started with pin mapping.
2022-07-01 14:50:46 -07:00
8814ee03f1
Merge pull request #6542 from todbot/wifi-tx-power
...
Add wifi.radio.tx_power
2022-07-01 14:09:08 -04:00
7589e53fea
WIP websocket accept and hashlib
2022-07-01 10:18:33 -07:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
187f156ac7
Merge pull request #6534 from tannewt/esp_wdt_safe_mode
...
Safe mode when ESP interrupt watchdog fires
2022-06-30 22:56:35 -04:00
63873e2c14
Merge pull request #6528 from tannewt/cp_webserver
...
Add web workflow to ESP boards
2022-06-30 22:53:47 -04:00
698d563dcf
adust wifi.radio.tx_power to be x4 (in db) as mentioned in #6540
2022-06-30 15:33:03 -07:00
2a563cc8ba
first cut at wifi.radio.tx_power
2022-06-30 15:10:16 -07:00
71358a4a63
Merge pull request #6526 from xuhow/elecfreaks_picoed
...
Add some frozen libraries to elecfreaks_picoed
2022-06-30 11:53:59 -07:00
b0efd130c9
ESP32 REPL working through debug UART
2022-06-29 23:19:36 -04:00
3be3e89d82
Merge branch 'main' into cp_webserver
2022-06-29 14:01:32 -07:00
c3a149c14a
Merge pull request #6533 from tannewt/fix_connect_crash
...
Fix auto-wifi created crash
2022-06-29 16:51:33 -04:00
d42c811fb9
Safe mode when ESP interrupt watchdog fires
...
This makes us enter safe mode when sleep on the S3 fails. The
task watchdog is used for the user watchdog.
2022-06-29 12:31:18 -07:00
8dc8265275
Fix auto-wifi created crash
...
The wifi event_handler runs on the other core so we need to be
careful when calling into CP APIs.
Fixes #6503
2022-06-29 11:53:10 -07:00
1f065a313c
Update with startup fix instead of revert
2022-06-29 11:12:29 -07:00
1599844b82
Add some frozen libraries to elecfreaks_picoed
2022-06-29 15:03:29 +08:00
780c4963cb
wip; change never-ever reset pin mechanism
2022-06-28 23:06:49 -04:00
a8bb3eb557
Update to newer 4.4 branch
2022-06-28 15:38:55 -07:00
ca64950503
wip fixes
2022-06-28 18:32:08 -04:00
131d70cebd
restore traceback to matrixportal build
2022-06-28 16:10:55 -04:00
41039445c9
Clean up and add docs
2022-06-27 13:39:09 -07:00
7acc5ebeb9
Add logo for going to home. Fix origin check
2022-06-27 13:39:09 -07:00
3cd05291d0
Static files + welcome page
2022-06-27 13:39:09 -07:00
7543dd9af0
CORS works and autoreload too
2022-06-27 13:39:08 -07:00
92593aa7a1
Fix bind, remove hard coded ip
2022-06-27 13:34:13 -07:00
4f0a7aedfd
WIP adding devices.json and auth
2022-06-27 13:34:13 -07:00
32478345f8
more tweaks
2022-06-27 13:34:13 -07:00
0882cbf823
web server kinda works
2022-06-27 13:34:13 -07:00
61d0f7947b
WIP doesn't flush response before closing
2022-06-27 13:34:13 -07:00
301f3e0456
Start of web server
2022-06-27 13:34:13 -07:00
55784c93de
wip; compiles
2022-06-26 21:22:22 -04:00
02069eb0b5
wip
2022-06-23 15:59:06 -04:00
a055113ed5
Merge pull request #6520 from dhalbert/7.3.1-to-main
...
Merge 7.3.1 changes to main
2022-06-23 11:15:40 -07:00
b0219f9b5b
Merge pull request #6518 from xorbit/rp2040-shim
...
Add board Silicognition LLC RP2040-Shim
2022-06-23 11:04:40 -04:00
feb1d903f7
merge 7.3.1 to main
2022-06-23 09:07:49 -04:00
897297bba4
Merge pull request #6516 from Neradoc/setup-default-ports-hiibot-iots2
...
Implement default busses to IOTS2
2022-06-22 09:46:08 -07:00
0b80c62400
Merge branch 'adafruit:main' into rp2040-shim
2022-06-22 11:40:02 -05:00
25206a8aff
Merge pull request #6513 from dhalbert/7.3.x-6495-backport-ble-disconnect-check
...
Test for a BLE disconnect while reading
2022-06-22 09:38:24 -07:00
ba72287db4
Implement default ports to IOTS2
2022-06-22 07:24:27 +02:00
e8023f33a9
Test for a BLE disconnect while reading
2022-06-21 19:59:23 -04:00
1ad3daf75b
Fix declaration of print_wakeup_cause
2022-06-21 19:56:15 -04:00
803c18c71f
Uncommented call to print_wakeup_cause
2022-06-21 19:56:15 -04:00
d3903bf2f4
Fix for Issue #6478
2022-06-21 19:56:15 -04:00
562c73bcc7
Merge pull request #6458 from blues/swan_r5_3v3_enable
...
fix(swan_r5): 3v3 was enabled but then immediately reset.
2022-06-21 13:56:58 -07:00
019a160983
exposes `DigitalInOutPin` instances on the board, initialized and reserved.
2022-06-20 14:46:58 -07:00
7f968f18c0
move frozen adafruit_circuitplayground to express subdirectory
2022-06-20 16:55:10 -04:00
c27ecc9bb1
Merge pull request #6495 from DavePutz/issue_6451
...
Test for a BLE disconnect while reading
2022-06-17 09:37:07 -07:00
f0bf14094b
Update samd-peripherals to fix SPI DMA problem
2022-06-17 10:59:59 -04:00
f590c7cc9a
Merge pull request #6485 from electrolama/add-board-electrolama-minik
...
Add custom board: Electrolama minik (RP2040 module)
2022-06-17 09:01:04 -04:00
cdc7140318
Test for a BLE disconnect while reading
2022-06-16 14:56:18 -05:00
894cea217d
Merge pull request #6486 from DavePutz/issue_6478
...
Fix for Issue #6478
2022-06-15 09:43:09 -07:00
8668dee3df
Fix declaration of print_wakeup_cause
2022-06-14 20:51:07 -05:00
669e45497c
Uncommented call to print_wakeup_cause
2022-06-14 13:27:15 -05:00
ad56a16c2d
Add board Silicognition LLC RP2040-Shim
2022-06-14 11:28:41 -06:00
015e95807a
Fix for Issue #6478
2022-06-14 12:14:05 -05:00
9fbad229c0
Add custom board: Electrolama minik (RP2040)
2022-06-14 15:51:10 +01:00
0c418e98b1
Merge remote-tracking branch 'adafruit/main' into auto_wifi
2022-06-13 15:44:43 -07:00
dc794f91c0
Speed up auto-wifi with wrong password
...
This adds basic timeout support to connect by preventing subsequent
retries if over time. The first connect may still take more than
the timeout.
2022-06-13 15:38:19 -07:00
1a3d2a5b5e
Shrink nrf52833 builds
...
Make them CIRCUITPY_FULL_BUILD = 0 and rework the boards to have
the same modules enabled (ish.)
Also make ZLIB require FULL_BUILD and disable advanced `micropython`
module APIs by default on all builds.
2022-06-13 15:36:15 -07:00
b191075ab8
Better length checks
2022-06-13 09:18:42 -07:00
ab346a27fc
Merge pull request #6468 from blues/stm32_rtc
...
feat(swan_r5): adds a basic STM32 RTC implementation.
2022-06-13 09:00:09 -07:00
39b8c2c94e
Merge pull request #6453 from KurtE/ESP32_UART
...
ESP32 USE uart_param_config
2022-06-13 08:56:32 -07:00
beafbc7c60
enable RTC for all STM32 devices
2022-06-10 17:37:33 -07:00
6ee8e00936
fix(stm32): correct include path after translation header was moved
2022-06-10 17:37:33 -07:00
a889638468
feat(swan_r5): adds a basic RTC implementation.
2022-06-10 17:37:32 -07:00
6e090c96a5
squeeze some specialized builds
2022-06-10 16:24:52 -04:00
6446010753
Wi-Fi autoconnect and title bar status
...
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD
in `/.env`. When both are defined, CircuitPython will attempt to
connect to the network even when user code isn't running. If the
user code attempts to a network with the same SSID, it will return
immediately. Connecting to another SSID will disconnect from the
auto-connected network. If the user code initiates the connection,
then it will be shutdown after user code exits. (Should match <8
behavior.)
This PR also reworks the default displayio terminal. It now supports
a title bar TileGrid in addition to the (newly renamed) scroll area.
The default title bar is the top row of the display and is positioned
to the right of the Blinka logo when it is enabled. The scroll area
is now below the Blinka logo.
The Wi-Fi auto-connect code now uses the title bar to show its
state including the IP address when connected. It does this through
the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s>
is the title bar string. This is commonly supported by terminals
so it should work over USB and UART as well.
Related to #6174
2022-06-09 14:55:54 -07:00
42f05a32a3
Merge branch 'adafruit:main' into main
2022-06-09 08:42:42 +02:00
9c20eb58e9
Merge pull request #6450 from mwisslead/rp2040_pulsein_common_hal_construct
...
Rp2040 pulsein improvements
2022-06-08 08:15:29 -07:00
5c13f844c7
Fixed pre-commit trailing whitespace
2022-06-08 16:43:49 +02:00
91000ea294
Adds support for Challenger RP2040 LoRa boards
2022-06-08 16:38:21 +02:00
0a38088075
Fix dependencies for translate.c again
2022-06-07 07:35:54 +02:00
2baf476530
Merge pull request #6463 from adafruit/7.3.x
...
Catch main up to 7.3.x
2022-06-06 11:58:05 -07:00
6b09f99eaa
Add back ULAB
2022-06-06 10:35:37 -07:00
2f0d82a50b
Disable board.SPI() for Challenger NB RP2040 WiFi
...
This was done as a result of an issue with the SPI pin mappings.
Please refer to the following for additional information: https://ilabs.se/challenger-rp2040-wifi-spi-bug
2022-06-06 09:52:23 +02:00
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
ac282b2a73
Merge pull request #6440 from tannewt/translate_header
...
Switch translate() to the header file
2022-06-05 23:50:47 -04:00
a61c4c1af9
Merge pull request #6411 from fabaff/weact-studio-pico
...
Add support for WeAct Studio Pico
2022-06-05 19:17:56 -04:00
7a073317f7
Update PID (0x102E)
2022-06-06 01:03:02 +02:00
c149bbdcfc
Merge pull request #6447 from SimonVail/main
...
Add files via upload
2022-06-05 17:11:44 -04:00
db6d506b15
Merge pull request #6456 from dhalbert/adafruit_feather_esp32s3_4mbflash_2mbpsram
...
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-05 12:31:20 -04:00
67de89861e
new argument for feather s3 tft display init
2022-06-04 11:36:45 -05:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
be6936c8ec
Shrink MatrixPortal M4 build
2022-06-03 18:57:01 -07:00
d1cdb72020
Update ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-06-03 18:21:20 -04:00
be67067809
Merge remote-tracking branch 'adafruit/main' into translate_header
2022-06-03 15:18:18 -07:00
78e4b9446b
chore(swan_r5): pre-commit formatting
2022-06-03 15:12:41 -07:00
a4a744bccc
Merge pull request #6441 from gamblor21/static_ip
...
Static IP address for WiFi
2022-06-03 14:56:08 -07:00
113b070e77
fix(swan_r5): 3v3 was enabled but then immediately reset. Moved initialization to `reset_board` which happens after `reset_all_pins`.
2022-06-03 14:19:47 -07:00
fdb133bbe8
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-02 21:09:37 -04:00
0d257fc4f8
Fix mpy-cross and unix builds
2022-06-02 12:30:19 -07:00
27fb96e6b0
Remove trailing whitespace
2022-06-01 21:35:01 -04:00
3ff7ed75c6
Merge pull request #6346 from Neradoc/cpx-frozen-lite
...
Move frozen adafruit_circuitplayground to CPX subdirectory
2022-06-01 21:15:46 -04:00
40e890323b
Add DNS optional to set IP
2022-06-01 20:13:51 -05:00
14ab3c7375
ESP32 USE uart_param_config
...
Use this function instead of several individual configuration functions
to configure such things as Baud rate, transfer size, stop bits,
parity...
This function also resets both the RX and TX Hardware Fifo
reset functions are called to setup the hardware.
2022-06-01 17:09:44 -07:00
09c61efcff
Split partition from LTO enable
2022-06-01 11:12:14 -07:00
6d3698848c
Fix PDMIn.c formatting
2022-06-01 11:04:33 -07:00
4f6d4e2284
Doc fix and add set for DNS
2022-05-31 22:13:18 -05:00
7fc0aa5791
Fix windows and two samd builds
2022-05-31 14:48:41 -07:00
4d776339ad
Separate translate object control from LTO
2022-05-31 12:42:59 -07:00
b2344bcde2
Update pins.c
2022-05-30 11:52:29 -04:00
f36dbb386b
Add files via upload
2022-05-30 11:47:51 -04:00
e8dd5d35d6
# WARNING: head commit changed in the meantime
...
Fixed STM SPI frequency settings.
Corrected default frequency settings in common_hal_busio_spi_construct.
Fixed common_hal_busio_spi_get_frequency.
2022-05-29 16:13:38 +02:00
ffc451b338
argument for backlight_pwm_frequency and use it in pyportal titano build
2022-05-28 12:01:05 -05:00
3cc46c74b9
Fix compiles
2022-05-27 15:39:55 -07:00
90fe20a153
Adding manual IP address set
2022-05-27 15:33:54 -05:00
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
c676253834
Switch translate() to the header file
...
This allows the compile stage to optimize most of the translate()
function away and saves a ton of space (~40k on ESP). *However*, it
requires us to wait for the qstr output before we compile the rest
of our .o files. (Only qstr.o used to wait.)
This isn't as good as the current setup with LTO though. Trinket M0
loses <1k with this setup.
So, we should probably conditionalize this along with LTO.
2022-05-27 10:33:53 -07:00
dc5565a5ce
Merge pull request #6436 from dhalbert/judicious-lto
...
LTO: Use -flto and -flto-partition only as needed
2022-05-27 10:31:06 -07:00
947f564672
tune LTO on nrf
2022-05-26 22:16:41 -04:00
67e9fb13bc
Merge pull request #6437 from blues/7.3.x
...
swan_r5 improvements
2022-05-26 15:20:22 -07:00
ca085150ee
disable traceback on samd21; re-enable onewireio on Metro m0
2022-05-26 15:33:04 -04:00
95fc7e4713
harmless change to force all ports to build
2022-05-26 11:52:58 -04:00
d74193c298
Use -flto and -flto-partition only as needed
2022-05-26 11:36:41 -04:00
8539d6518e
flip CTS and RTS pinmux to match RX and TX
2022-05-26 00:06:00 +00:00
99b23b96d9
fix comment typo and mention datasheet
2022-05-26 00:03:46 +00:00
fb3077ccc2
Implement UART hardware flow control on SAMD chips
2022-05-25 21:34:06 +00:00
321163da1a
feat(swan_r5): blink the LED on startup. set VUSB_SELECT and DISCHARGE to floating to avoid any potential issues with them being outputs.
2022-05-25 14:22:19 -07:00
65a5ad09ab
feat(swan_r5): define an `ext` attribute on the board, which contains attributes for the extended set of castellated pins
2022-05-25 14:21:03 -07:00
5bbaa3b732
feat(swan_r5): the upper 1MB of flash (bank 2) is made available for the filesystem
2022-05-25 14:19:35 -07:00
b607631ae1
feat(swan_r5): UF2 support, with UF2 family IDs assigned to stm32 chipsets.
2022-05-25 14:18:37 -07:00
38f91539dc
Merge pull request #6432 from CytronTechnologies/add-maker-zero-samd21
...
Add new board: Cytron Maker Zero SAMD21
2022-05-25 13:58:33 -04:00
1fb210bd40
Merge pull request #5491 from pypewpew/remove-gamepadshift
...
Remove gamepadshift module
2022-05-25 13:58:06 -04:00
aef5bc40fb
Deleted white spaces
2022-05-26 00:13:27 +08:00
b143314b22
Espressif: fix allocation of multiple Incremental Encoders
2022-05-24 22:37:24 -04:00
9ed71f0c09
Add Cytron Maker Zero SAMD21
2022-05-25 10:09:30 +08:00
0b99967839
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:58 +08:00
46f4fcc42f
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:17 +08:00
9385f793dc
Add Cytron Maker Zero SAMD21
2022-05-25 10:07:33 +08:00
6fa552e257
Delete board.c
2022-05-25 10:04:06 +08:00
5453b331f7
Delete mpconfigboard.h
2022-05-25 10:03:53 +08:00
8806f5b5d8
Delete mpconfigboard.mk
2022-05-25 10:03:45 +08:00
9649d80ea3
Delete pins.c
2022-05-25 10:03:34 +08:00
4e467b7f34
Add Cytron Maker Zero SAMD21
2022-05-25 09:46:20 +08:00
c0152e7dab
Remove gamepadshift module
...
Everything should be using the keypad module instead.
Note: there are several boards that still had gamepadshift enabled. I
did not contact their authors to make sure they already switched to
keypad in their code and documentation. We should probably wait with
merging this for their go ahead.
2022-05-25 00:48:55 +02:00
791064a934
Merge pull request #6427 from dhalbert/8.0.0-onewireio
...
Remove busio.OneWire and bitbangio.OneWire in favor of onewireio.OneWire
2022-05-24 15:32:33 -04:00
ecd30d2338
Merge pull request #6428 from dhalbert/8.0.0-restore-rainbowio
...
restore rainbowio to small builds
2022-05-24 15:32:08 -04:00
8665e85ea6
Merge pull request #6424 from ladyada/main
...
add esp32s3 tft
2022-05-24 15:31:48 -04:00
99d7d0d8bb
Disable ulab for ESP32-S3 TFT
2022-05-24 14:59:34 -04:00
0ea72d61e0
Merge pull request #6425 from KurtE/teensy_retain_fs
...
Teensy Builds retain Filesystem
2022-05-24 11:03:47 -07:00
335c93c044
restore rainbowio to small builds
2022-05-24 12:34:08 -04:00
74c92ffe9e
Remove busio.OneWire and bitbangio.OneWire
2022-05-24 12:26:33 -04:00
92fa02effa
Change 12- to 16-bit scaling to match other ports
...
Result is identical, implementation just resembles other ports instead of being all 1337 about it.
2022-05-24 08:49:05 -07:00
c3f58193ca
Correctly scale analog reading per issue #4794
2022-05-24 08:46:39 -07:00
e22de975b3
try just bitbangio remove
2022-05-24 11:46:03 -04:00
5ef1f2dd5a
Correctly scale analog reading per issue #4794
2022-05-24 08:45:14 -07:00
44b31b098e
Correctly scale analog reading per issue #4794
2022-05-24 08:44:09 -07:00
e9b9f0b13f
Correctly scale analog reading per issue #4794
2022-05-24 08:42:00 -07:00
eefba16644
Correctly scale analog reading per issue #4794
2022-05-24 08:40:51 -07:00
9439ce04bd
try to remove some space?
2022-05-24 11:28:55 -04:00
d47662c448
Teensy Builds retain Filesystem
...
Changed a few things in the link step that satisfies the teensy
loader apps, both the teensy.exe as well as the teensy_loader_cli
such that when you program the board again it should retain the
file sytem that is stored in the upper area of the Flash
2022-05-24 07:06:16 -07:00
bb4beb3fab
add esp32s3 tft
2022-05-23 23:57:35 -04:00
3179db4ef4
move frozen adafruit_circuitplayground to express subdirectory
2022-05-23 22:11:26 +02:00
64df933a83
Merge pull request #6422 from dahanzimin/main
...
Repair mixgo_ce frozen lib to frozen/
2022-05-23 15:00:42 -04:00
0f1973b037
Merge pull request #6418 from solderparty/stamp_round_board
...
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-23 19:42:56 +02:00
Melissa LeBlanc-Williams
Xu Hao
Nathan Young
Tod Kurt
Dan Halbert
Jeff Epler
Dan Halbert
Scott Shawcroft
Nick Lopez
Patrick
Patrick Van Oosterwijck
Neradoc
root
Matthew McGowan
Omer Kilic
Pontus Oldberg
Fabian Affolter
foamyguy
gamblor21
KurtE
SimonVail
EmergReanimator
George White
Luqmanul Hakim Zulkifli
Radomir Dopieralski
Paint Your Dragon
lady ada
arturo182