djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
26,703 Commits 21 Branches 274 Tags 785 MiB
ff4a4465af
Commit Graph

569 Commits

Author SHA1 Message Date
Scott Shawcroft
76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
root
5bd1da21a2 Increased possible pulsein length to 32 ms. 2021-04-25 21:38:57 -05:00
Jeff Epler
92919c25c2
Merge pull request #4666 from DavePutz/issue_4660 
Reset buffer index in PulseIn clear
 2021-04-25 20:33:58 -05:00
root
d1861a6b9c Reset buffer index in PulseIn clear 2021-04-25 14:24:21 -05:00
Limor "Ladyada" Fried
f7f6a42f3d
Merge pull request #4663 from zapwizard/patch-1 
Update pins.c
 2021-04-25 15:09:13 -04:00
zapwizard
889da596ff
Update pins.c 
Both D0 and D1 were assigned to pin_GPIO7, fixed D0 to pin_GPIO6, which also matches the comment.
 2021-04-25 13:10:52 -05:00
gamblor21
30f31639d3 Added statemachine deinit 2021-04-25 11:58:22 -05:00
Dan Halbert
9d1fcc3b14 merge from main 2021-04-25 10:27:52 -04:00
Dan Halbert
80f05c76a8
Merge pull request #4654 from dhalbert/6.2.x-merge-1 
Port #4645 to main
 2021-04-24 10:29:52 -04:00
Scott Shawcroft
80e8b4ac14
Merge pull request #4635 from jepler/pcc 
WIP: Implement 'ParallelImageCapture' for samd51
 2021-04-23 13:31:53 -07:00
Dan Halbert
454e78f41f merge #4645 from 6.2.x to main 2021-04-23 13:33:58 -04:00
Jeff Epler
f838ff9528 raspberrypi: Remove debug prints 2021-04-23 09:44:01 -05:00
Jeff Epler
10fee3e673 raspberrypi: Increase PIO clock speed in ParallelImageCapture 
.. this allows DIV_4 and DIV_2 resolutions to work without being
jumbled.
 2021-04-22 12:14:44 -05:00
Jeff Epler
2def016fd0 raspberrypi: Use 32-bit elements in FIFO 
.. these do come in the right
 2021-04-22 12:14:03 -05:00
Jeff Epler
7fb751808f raspberrypi: Implement ParallelImageCapture using PIO 
.. based on code from Phil B.
 2021-04-22 12:02:51 -05:00
Dan Halbert
64e0958916 wip: descriptor building 2021-04-21 23:25:36 -04:00
Dan Halbert
b3ffb3ab1f Return bytes written from RP2040 UART.write() 2021-04-21 18:38:35 -04:00
Limor "Ladyada" Fried
17e419f129
Merge pull request #4633 from ZodiusInfuser/main 
Tweaked Pimoroni board names
 2021-04-19 15:16:37 -04:00
ZodiusInfuser
efdbc6be08 Tweaked board name 2021-04-19 10:38:07 +01:00
Limor "Ladyada" Fried
b6fa90d0b5
Merge pull request #4625 from stonehippo/sparkfun_micromod_atp_rp2040 
Added Sparkfun MicroMod RP2040
 2021-04-18 21:14:47 -04:00
George White
5bd2e97865
Fix pin definitions 
I missed a few pin definitions. Fixed those.
 2021-04-17 18:43:49 -04:00
George White
493127f4bc pre-commit trailing space fixes 2021-04-17 17:43:13 -04:00
George White
e0bb7385a1
Added Sparkfun MicroMod RP2040 
Added board definition for the Sparkfun MicroMod RP2040.

Mostly followed the format for pins from the MicroMod nRF52840 board
definition, as MicroMod tries to standardize pins across
microcontrollers.
 2021-04-17 10:56:04 -04:00
Dan Halbert
b2160bdddd
Add VBUS_SENSE (GP24) to board 
Prompted by https://forums.adafruit.com/viewtopic.php?f=60&t=178237.
Also add some whitespace to make pin aliases stand out, and add GP23 as an alias for `SMPS_MODE`.
 2021-04-17 08:51:20 -04:00
ZodiusInfuser
efa9cfa5ec Tweaked board name 2021-04-16 18:02:10 +01:00
Dan Halbert
f55d684057
Merge pull request #4612 from ZodiusInfuser/main 
Added definitions for Pimoroni RP2040-based boards
 2021-04-15 19:20:24 -04:00
ZodiusInfuser
1c700a82c9 Removed trailing whitespaces 2021-04-15 12:01:47 +01:00
ZodiusInfuser
f69bf8beb9 Removed whitespaces 2021-04-15 11:57:27 +01:00
ZodiusInfuser
d67ccb625c Added correct USB PIDs 2021-04-15 11:41:46 +01:00
ZodiusInfuser
e4456bd756 Added definitions for PicoLipo boards 2021-04-14 23:09:10 +01:00
Scott Shawcroft
3978b50b8d
Merge pull request #4489 from gamblor21/audiomixer_rp2040 
Add non M4 audiomixer support
 2021-04-14 12:19:17 -07:00
Dan Halbert
11b9a5e605
Merge pull request #4577 from dglaude/patch-1 
Respect product name: space between QT and Py
 2021-04-09 13:10:19 -04:00
Dan Halbert
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor 
IncrementalEncoder: factor out the quadrature state machine
 2021-04-09 13:10:02 -04:00
Dan Halbert
61e33a5619 fix nrf ISR; make direction consistent across ports; save code size 2021-04-09 11:07:47 -04:00
Dan Halbert
fdc5bb41f4
D3 pin should be GPIO26 2021-04-08 19:11:27 -04:00
Jeff Epler
3ce0b512f8 rasberrypi: IncrementalEncoder: factor out state machine 2021-04-08 16:25:47 -05:00
David Glaude
5d6bef569d
Respect product name: space between QT and Py 
https://www.adafruit.com/product/4900 say "Adafruit QT Py RP2040"

This is also matching other "QT Py" product.
 2021-04-08 21:50:16 +02:00
Scott Shawcroft
6097afdaa5
Merge pull request #4559 from jepler/rp2-rotary-encoder-fixes 
raspberrypi: Several rotary encoder fixes
 2021-04-06 10:00:26 -07:00
Jeff Epler
1a2ce27b73 raspberrypi: Drop support for auto-reversing swapped encoder 2021-04-06 09:22:59 -05:00
Scott Shawcroft
71eabe814c
Update StateMachine.c 2021-04-05 16:17:08 -07:00
Jeff Epler
fc86475de5 IncrementalEncoder: support swapped pins 
Closes: #4422
 2021-04-04 13:49:50 -05:00
Jeff Epler
93d6ceedd9 IncrementalEncoder: Disconnect interrupt handler during deinit. 
Closes: #4557
 2021-04-04 13:49:41 -05:00
Jeff Epler
bcd90dd927 IncrementalEncoder: There are no out pins. 
Closes #4556
 2021-04-04 13:49:21 -05:00
Jeff Epler
cce8b2be07 raspberypi: Allow mpconfigboard to override additional items 
This allows more options to be overridden to 0 in an mpconfigboard.mk.

Improved:
 * FRAMEBUFFERIO, FULL_BUILD, BITOPS, PWMIO, RGBMATRIX, OTARYIO, PULSEIO, WATCHDOG

Still problematic (pull requests welcome):
 * RP2PIO & NEOPIXEL_WRITE, possibly only if a status neopixel is defined
 * BITBANGIO, possibly only if BUSIO is enabled
 * RTC

Incidentally, with RP2PIO & NEOPIXEL_WRITE, BITBANGIO, and RTC re-enabled I get
```
323956 bytes used, 720524 bytes free in flash firmware space out of 1044480 bytes (1020.0kB).
12072 bytes used, 250072 bytes free in ram for stack and heap out of 262144 bytes (256.0kB).
```

Closes #4515
 2021-03-31 09:40:48 -05:00
Dan Halbert
8e0834d74c Calculate RP2040 SDA hold time 2021-03-29 14:40:13 -04:00
Dan Halbert
03340a3fcd Incorporate https://github.com/adafruit/pico-sdk/pull/2 2021-03-26 18:55:45 -04:00
Dan Halbert
155b61f027
Merge pull request #4378 from Gadgetoid/patch-remove-rp2040-i2c-bitbang 
RP2040: Remove short-write bitbang from I2C
 2021-03-25 21:01:02 -04:00
gamblor21
0b212e2243 Add non M4 audiomixer support 2021-03-25 17:30:40 -05:00
Scott Shawcroft
f79d60b205
Use GCC @file to shorten linker command length 
This hopefully fixes linking on Windows with cmd.exe
 2021-03-24 15:03:33 -07:00
Scott Shawcroft
36edc4bb89
Improve Winbond naming and correct board settings 2021-03-23 09:06:48 -07:00
Scott Shawcroft
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash 2021-03-22 15:29:43 -07:00
Scott Shawcroft
f200e6a21e
Fix doc build and address feedback 2021-03-22 15:24:27 -07:00
lady ada
36ae69ab6f qtpy is more of a button than a switch! add itsybitsy rev C files 2021-03-21 18:44:32 -04:00
lady ada
ebd6011633 add USBBOOT switch, move RX pin, re-enable UART (tested) 2021-03-21 14:58:18 -04:00
Scott Shawcroft
4aea7f8f52
Add requirements-dev.txt for python deps 2021-03-19 15:22:23 -07:00
Scott Shawcroft
5d2b60cbf6
Redo RP2040 flash settings 
This switches stage2 to C and uses Jinja to change the C code based
on flash settings from https://github.com/adafruit/nvm.toml. It
produces the fastest settings for the given set of external flashes.
Flash size is no longer hard coded so switching flashes with similar
capabilities but different sizes should *just work*.

This PR also places "ITCM" code in RAM to save the XIP cache for
code execution. Further optimization is possible. A blink code.py
still requires a number of flash fetches every blink.

Fixes #4041
 2021-03-18 16:55:42 -07:00
Scott Shawcroft
11e510a06a
Merge pull request #4419 from spe2/main 
Add board definition for Sparkfun Pro Micro RP2040
 2021-03-17 18:17:24 -07:00
Jeff Epler
719e8710f2
Merge pull request #4411 from mintakka/thingplus-rp2040 
added board configuration for Sparkfun ThingPlus RP2040
 2021-03-17 16:23:55 -05:00
Phil Howard
b8d4f9655f RP2040: Only bitbang 0-byte writes 
The I2C.c for RP2040 included a special case for writes <=2 bytes to match the MicroPython implementation,
however RP2040 does support 1 and 2 byte reads, with only 0 bytes being the exception.

Signed-off-by: Philip Howard <phil@pimoroni.com>
 2021-03-17 16:25:54 +00:00
mintakka
337727ba0c renamed board folder to match board name in boards.yml 2021-03-16 21:10:10 -04:00
spe2
dcd9a8ab91
Update ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.mk 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-16 10:54:20 -07:00
spe2
5bc132a209
Update ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.h 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-16 10:54:15 -07:00
mintakka
b5333f2bdf
Update ports/raspberrypi/boards/sparkfun_thingplus_rp2040/mpconfigboard.h 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-16 13:47:33 -04:00
mintakka
3d15877639
Update ports/raspberrypi/boards/sparkfun_thingplus_rp2040/mpconfigboard.mk 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-16 13:47:21 -04:00
gamblor21
3b01a65743 Fixed formatting 2021-03-16 08:14:49 -05:00
spe2
9de40f56f3
Add board config files 2021-03-15 22:08:19 -06:00
spe2
c9427780b3
Create pins.c 2021-03-15 22:07:24 -06:00
mintakka
49baa94446 added sparkfun_thingplus_rp2040 to .github/workflows/boards.yml and renamed board folder to include chip 2021-03-15 23:00:24 -04:00
mintakka
288415f867
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.h 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-15 21:07:31 -04:00
mintakka
30a74b3d92
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.mk 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-15 21:07:24 -04:00
Mark
e326d7ca80
Merge branch 'main' into rp_dp_parallel 2021-03-15 20:00:13 -05:00
Scott Shawcroft
f7a988b9b3
Merge pull request #4405 from DavePutz/issue_4237 
Issue 4237 - Changed initial setting in program_struct
 2021-03-15 17:51:36 -07:00
mintakka
0567d06936 added board configuration for Sparkfun ThingPlus RP2040 2021-03-15 10:27:21 -04:00
microDev
a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
root
9a83501982 Fixed initial settings for program_struct to allow more than 1 program per pio 2021-03-14 15:05:56 -05:00
Dan Halbert
8e425a9354
Merge pull request #4393 from tannewt/raise_default_flash_speed 
Speed up a bit more
 2021-03-13 12:50:29 -05:00
Scott Shawcroft
1b106de4e0
Merge pull request #4262 from DavePutz/issue_4111 
Issue 4111 - Implement pulseio(pulsein) for RP2040
 2021-03-12 16:48:57 -08:00
Scott Shawcroft
45487f14a0
Speed up a bit more 2021-03-12 16:00:16 -08:00
DavePutz
96ce43e6d6
Added the correct files 2021-03-12 16:18:33 -06:00
DavePutz
6628f49852
Use StateMachine.c interrupt setup and simplify SM program 2021-03-12 16:06:57 -06:00
Scott Shawcroft
aec03a409f
Lower default flash speed. 
/ 6 leads to ~40mhz. 2M and 4M have a max 0x03 read speed of 60mhz.
If the divisor is / 4 then the speed is just over 60mhz.

Fixes #4377
 2021-03-12 11:06:39 -08:00
gamblor21
307d2a99fe Fix after rebase 2021-03-11 20:06:50 -06:00
gamblor21
5689307798 Changed frequency to match PIO having 2 instructions 2021-03-11 19:32:44 -06:00
gamblor21
b02b1e9979 Set frequency default 60Mhz 2021-03-11 19:32:44 -06:00
gamblor21
1658fe04f9 Set the statemachine to never reset so REPL works 2021-03-11 19:32:44 -06:00
gamblor21
c384ebe5c0 Updated to initalize pindirs 2021-03-11 19:32:44 -06:00
gamblor21
56a219911f Add frequency support to parallel bus 2021-03-11 19:32:43 -06:00
gamblor21
b080d6207b Removing debug info and clean up 2021-03-11 19:32:43 -06:00
gamblor21
c6aaab6f64 Initial commit 2021-03-11 19:32:43 -06:00
Jeff Epler
24f4d981bd
Merge pull request #4380 from jepler/rp2040-audiomp3 
raspberrypi: Enable mp3 playback
 2021-03-11 12:53:46 -06:00
Jeff Epler
16bfe3b41c raspberrypi: RTC: Ensure a time is set 
Until a time is set, the RTC is not running, and rtc_get_datetime()
returns false without assigning to the out-parameter.

In CircuitPython, this would manifest as arbitrary values being returned,
since uninitialized storage on the stack was being converted into a timestamp.
 2021-03-10 20:20:40 -06:00
Jeff Epler
c95def0b32 raspberrypi: Enable mp3 playback 
The rp2040 is _very_ marginal for mp3 playback, and currently sometimes triggers a bug that gives garbled audio output.  However, it does work for some limited situations.
 2021-03-10 18:44:10 -06:00
hathach
58fb011070 clean up 2021-03-10 19:03:27 +07:00
hathach
d1c6bb0927 rp2040 add double reset to uf2, also update pico-sdk to 1.1.0 2021-03-10 18:58:23 +07:00
DavePutz
a3c3e8a0fa
fix trailing whitespace 2021-03-09 22:41:08 -06:00
DavePutz
0c58cc4772
Moved pin wait to an initial exec 2021-03-09 16:37:29 -06:00
DavePutz
f0e3274a33
Update to agree with modified StateMachine.h 2021-03-09 11:13:09 -06:00
DavePutz
6f4510d7aa
Merge branch 'main' into issue_4111 2021-03-08 23:28:21 -06:00
root
576da73a17 Added check for maxlen 2021-03-08 23:23:51 -06:00
root
95b7a59156 Merge branch 'issue_4111' of https://github.com/DavePutz/circuitpython into issue_4111 2021-03-08 23:22:05 -06:00
root
3db0fec267 Added check for maxlen 2021-03-08 23:20:57 -06:00
DavePutz
88650bc4d0
Removed leftover debug code 2021-03-08 22:48:57 -06:00
Jeff Epler
cd1f19020f raspberrypi: move landmine Makefile comments 2021-03-05 12:59:55 -06:00
Jeff Epler
2ae1e7de61 WIPrp2040: Implement IncrementalEncoder 
Any two consecutive pins can be used for an IncrementalEncoder

Testing performed: Put a synthesized (few hundred counts per second) quadrature signal into GP2/3 and read the encoder out.  Performed filesystem operations at the same time to stress test it.

The reasons for not using common_hal_rp2pio_statemachine_readinto are commented on.
 2021-03-05 10:31:29 -06:00
DavePutz
a4dda3a5ba
Merge branch 'main' into issue_4111 2021-03-04 14:38:00 -06:00
DavePutz
c5c297d2c0
Update PulseOut.c 2021-03-04 13:53:19 -06:00
DavePutz
b7f03f9487
Update PulseOut.h 2021-03-04 13:52:40 -06:00
DavePutz
2d941b070f
Changed interrupt to per-word basis; cleaned up other small items 2021-03-04 13:51:46 -06:00
Jeff Epler
bc14ed31f6 StateMachine.h: Add header for declaration of mcu_pin_obj_t typedef 2021-03-04 12:28:46 -06:00
Jeff Epler
c023ec03ff PDMIn: Add missing deinit call 2021-03-04 12:28:06 -06:00
Jeff Epler
bd01d31542 rp2pio: Add pins_are_sequential 
This can be used where the standard API calls for a list of pins, to check that they satisfy the requirements of the rp2pio state machine, e.g.,
```python
    def __init__(self, pin_a, pin_b):
        if not rp2pio.pins_are_sequential([pin_a, pin_b]):
            raise ValueError("Pins must be sequential")
```
 2021-03-04 11:26:33 -06:00
Jeff Epler
ff62b0d2c0 StateMachine: Add pull up/down for inputs 2021-03-04 11:26:29 -06:00
Jeff Epler
68ac14b309 StateMachine: Add in_available property 
I named the property `in_available` because it is similar to pyserial.
However, it indicates the number of words in the fifo, not the number
of bytes.
 2021-03-04 11:14:09 -06:00
hathach
6f99026a64 rp2040 use normal usb_irq_handler() 2021-03-04 21:29:04 +07:00
Dan Halbert
71c43ca2dd
Merge pull request #4319 from jepler/feather-default-uart 
feather rp2040: enable default board.UART
 2021-03-03 16:46:00 -05:00
Jeff Epler
b0fca4fcda feather rp2040: enable default board.UART 2021-03-03 13:13:06 -06:00
Dan Halbert
cd48c5ee83
Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes 
RP2040: Implement short I2C writes (2 bytes or less) using bitbangio
 2021-03-03 12:42:47 -05:00
DavePutz
88353f2f5b
Update mpconfigport.mk 2021-03-03 11:00:58 -06:00
DavePutz
ced707ed32
Update call to rp2pio_statemachine_construct 2021-03-03 10:55:08 -06:00
Scott Shawcroft
514b73bcf8
Merge pull request #4254 from gamblor21/rp2040_countio 
Rp2040 countio
 2021-03-03 08:47:24 -08:00
Scott Shawcroft
1d8933dd05
Merge pull request #4265 from DavePutz/pio_soft_reset 
Clear out PIOs and State Machines on RP2040 soft reset
 2021-03-03 08:43:57 -08:00
Dan Halbert
fb7a0f7efc add 1sec timeouts for I2C read and write 2021-03-03 09:43:57 -05:00
gamblor21
98075c5255 Fixed merge 2021-03-02 22:32:59 -06:00
Dan Halbert
e3ab394cd6 works on nearly all sensors 2021-03-02 23:27:37 -05:00
Dan Halbert
4167778bbc
Merge pull request #4312 from jepler/feather-rp2040-led 
feather rp2040: add board.LED
 2021-03-02 23:19:14 -05:00
DavePutz
9b96bae668
Update mpconfigport.mk 2021-03-02 21:36:00 -06:00
DavePutz
30d491e136
Update mpconfigport.mk 2021-03-02 21:30:49 -06:00
DavePutz
58fb7b9b32
Update mpconfigport.mk to get builds working 2021-03-02 21:27:46 -06:00
DavePutz
6046d37f31
Update PulseIn.c 2021-03-02 21:23:45 -06:00
Mark
37ee18349f
Merge branch 'main' into rp2040_countio 2021-03-02 19:47:53 -06:00
gamblor21
4246cc3f6d Counter and PWMOut slice conflict check 2021-03-02 19:32:06 -06:00
Jeff Epler
b27afad9cb move LED to the right spot in the file 2021-03-02 19:02:38 -06:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2 
Enable protomatter on RP2040 builds
 2021-03-02 19:01:37 -06:00
Dan Halbert
15615effc2
Merge pull request #4276 from bergdahl/patch-1 
Update StateMachine.c
 2021-03-02 17:11:45 -05:00
Dan Halbert
f31b472309 Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes 2021-03-02 15:17:12 -05:00
Dan Halbert
9939c59caa wip 2021-03-02 15:16:55 -05:00
Jeff Epler
8bfd308d37 feather rp2040: add board.LED 2021-03-02 13:16:09 -06:00
Scott Shawcroft
ce70b95990
Merge pull request #4177 from microDev1/nvm-rp 
RP2040: Support for NVM
 2021-03-02 09:57:36 -08:00
Dan Halbert
f41fb6fafc
Apply suggestions from code review 
copyediting
 2021-03-02 12:01:50 -05:00
Scott Shawcroft
2651e15a52
Merge pull request #4309 from jepler/rp2040-interrupt-pio 
rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall)
 2021-03-02 08:55:27 -08:00
Jeff Epler
f560b5f3a3 raspberry: switch pico back to the boot2 for W25Q16 
Presumably, switching it to generic hurt performance a bit.

I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
 2021-03-02 08:08:41 -06:00
microDev
b029031286
minor structural modification 2021-03-02 14:36:28 +05:30
Jeff Epler
5a00862b1d raspberrypi: allow directly specifying the original boot .S file 
.. all the necessary steps to transform it into a padded, checksummed
file are now done by the build system.

Since it is assigned by "?=", it _should_ be the case that individual
builds can override it.

I did not "test" this per se, but it gives the same content and checksum
(except for the identifying comment with a path) as #4302.
 2021-03-01 21:08:19 -06:00
Jeff Epler
4b63a8c9b4 rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall) 2021-03-01 21:07:04 -06:00
Scott Shawcroft
21a8752166
Merge pull request #4297 from adafruit/tannewt-patch-1 
Update flash sizes for Adafruit RP2040 boards
 2021-03-01 13:19:50 -08:00
Jeff Epler
238484ec26 Merge remote-tracking branch 'origin/main' into update-protomatter-rp2 2021-03-01 15:18:32 -06:00
Scott Shawcroft
532e7db293
Merge pull request #4267 from dhalbert/rp2040-digitalinout-fixes 
RP2040: change DigitalInOut direction only when necessary; strong drive strength
 2021-03-01 13:14:13 -08:00
Scott Shawcroft
af9dfccab1
Update QT Py flash size 2021-03-01 10:34:25 -08:00
Scott Shawcroft
dac047db61
Update Feather RP2040 to 8MB 2021-03-01 10:33:04 -08:00
gamblor21
d7bc8a46a5 Added counters per slice 2021-02-27 15:17:27 -06:00
root
29c89a2487 Removed more includes 2021-02-26 22:35:38 -06:00
root
f3515502b7 Removed unecessary includes 2021-02-26 22:33:50 -06:00
root
6374408c06 Changed reset_rp2pio_statemachine to clean up any PIO interrupts. 2021-02-26 22:28:50 -06:00
Jonny Bergdahl
f7eac46c78
Update StateMachine.c 
Changed woring to use max instead
 2021-02-27 00:07:30 +01:00
Scott Shawcroft
776301c932
Typo fix: direcion -> direction 2021-02-26 15:03:56 -08:00
Scott Shawcroft
888a0c5f08
Merge pull request #4224 from microDev1/busio-uart-rp 
RP2040: Support for UART
 2021-02-26 14:57:23 -08:00
Dan Halbert
d9234ffa82 need to gpio_set_dir() at some point 2021-02-26 15:27:35 -05:00
root
7942932176 Requested changes 2021-02-26 14:14:55 -06:00
Scott Shawcroft
2e6e91dc5c
Merge pull request #4253 from tannewt/rp2040_fix_pwm_reuse 
Fix second shared PWM
 2021-02-26 11:53:54 -08:00
Scott Shawcroft
7c8d7d77dd
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp 2021-02-26 09:04:42 -08:00
Limor "Ladyada" Fried
caedc3bba6
Merge pull request #4270 from tannewt/rp2040_feather_pinout 
Update RP2040 Feather pinout for production rev
 2021-02-26 11:11:44 -05:00
Jeff Epler
1d1ff5f308 Merge remote-tracking branch 'origin/main' into update-protomatter-rp2 2021-02-26 09:56:35 -06:00
Scott Shawcroft
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp 2021-02-25 16:59:15 -08:00
Scott Shawcroft
52bc935fa7
A few minor fixes for corner cases 
* Always clear the peripheral interrupt so we don't hang when full
* Store the ringbuf in the object so it gets collected when we're alive
* Make UART objects have a finaliser so they are deinit when their
  memory is freed
* Copy bytes into the ringbuf from the FIFO after we read to ensure
  the interrupt is enabled ASAP
* Copy bytes into the ringbuf from the FIFO before measuring our
  rx available because the interrupt is based on a threshold (not
  > 0). For example, a single byte won't trigger an interrupt.
 2021-02-25 16:50:57 -08:00
Scott Shawcroft
f0432b9d6f
Remove neopixel power 2021-02-25 16:37:34 -08:00
Dan Halbert
d0f1cfb039 address review; use gpio_set() carefully 2021-02-25 18:41:22 -05:00
Scott Shawcroft
2b163ccd6a
Fix incorrect deinit mask 2021-02-25 14:57:46 -08:00
Scott Shawcroft
1b00d94b23
Fix second shared PWM 
Fixes #4210
 2021-02-25 14:49:09 -08:00
Scott Shawcroft
80f7972f72
Update RP2040 Feather pinout for production rev 2021-02-25 14:46:08 -08:00
Jeff Epler
22276710e6 rp2pio: Fix writing where the stride was 2 or 4 
The wrong stride value was being checked.
 2021-02-25 15:50:49 -06:00
Dan Halbert
199a8ce8b0 change DigitalInOut direction only when necessary; strong drive strength 2021-02-25 14:10:19 -05:00
root
f8eb5bc275 Cleanup PIOs and State Machines on soft reset 2021-02-25 12:38:43 -06:00
microDev
8170e26a86
more uart improvements 
- address suggested changes
- refine uart instance availibility checks
- improve pin validation and rx buffer handling
 2021-02-25 23:46:00 +05:30
root
86e60f5f35 Clean up formatting 2021-02-24 17:26:35 -06:00
root
17ff5dcc99 Return NotImplementedError for PulseOut 2021-02-24 17:04:05 -06:00
root
8e15f36baa pulseio (pulsein) for RP2040 2021-02-24 16:58:29 -06:00
microDev
5d7fdafcde
implement suggested changes 
- add internal buffering
- rtc initialization fix
 2021-02-25 00:48:36 +05:30
Mark
b935dcafdc
Merge branch 'main' into rp2040_countio 2021-02-23 19:46:41 -06:00
gamblor21
379f454ce6 Adding countio to rp2040 2021-02-23 19:38:05 -06:00
Scott Shawcroft
abbbb91fa8
Add state machine divisor check 
This causes an exception when setting a state machine too slow or
too fast.

Fixes #4222
 2021-02-23 16:30:46 -08:00
Scott Shawcroft
360475e266
Implement audiobusio and enhance PIO for it 
This adds I2SOut and PDMIn support via PIO.

StateMachines can now:
 * read and read while writing
 * transfer in 1, 2 or 4 byte increments
 * init pins based on expected defaults automatically
 * be stopped and restarted
 * rxfifo can be cleared and rxstalls detected (good for tracking when
   the reading code isn't keeping up)

Fixes #4162
 2021-02-23 15:50:00 -08:00
Scott Shawcroft
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards 
Added definitions for Pimoroni RP2040-based boards
 2021-02-23 10:00:19 -08:00
ZodiusInfuser
1a0bf4c33f
Added flash size for PicoSystem 2021-02-23 11:04:20 +00:00
ZodiusInfuser
a9951c9b6c
Added flash size for Keybow2040 2021-02-23 11:01:40 +00:00
ZodiusInfuser
ca9b7debe0
Added flash size for Tiny2040 2021-02-23 10:43:35 +00:00
Scott Shawcroft
3fdf29e773
More parens 2021-02-22 18:35:09 -08:00
Scott Shawcroft
863981a5b8
Parens 2021-02-22 18:31:45 -08:00
Scott Shawcroft
0aafeac209
Board specific flash sizes for RP2040 
Stop-gap solution for #4041. Comment is there to provide info
needed in the future. (We currently run the generic "safe" settings.)
 2021-02-22 17:19:18 -08:00
ZodiusInfuser
52f2fd6d53
Removed trailing white space 2021-02-20 17:25:26 +00:00
ZodiusInfuser
417173b752
Removed trailing white space 2021-02-20 17:24:26 +00:00
ZodiusInfuser
9a4b8c5ed9
Removed trailing white space 2021-02-20 17:23:23 +00:00
ZodiusInfuser
dea498a51f
Added new line 2021-02-20 17:20:28 +00:00
ZodiusInfuser
9fbeb0baea
Added new line 2021-02-20 17:20:06 +00:00
ZodiusInfuser
03577ec81c
Added new line 2021-02-20 17:19:45 +00:00
ZodiusInfuser
dac81ea545
Added new line 2021-02-20 17:19:31 +00:00
ZodiusInfuser
0a00f91979
Added new line 2021-02-20 17:15:42 +00:00
ZodiusInfuser
f1df07002f
Added new line 2021-02-20 17:15:20 +00:00
ZodiusInfuser
27bc5492f5
Added other files for PicoSystem 2021-02-20 13:37:08 +00:00
ZodiusInfuser
e9c7af1dee
Added board.c for PicoSystem 2021-02-20 13:36:46 +00:00
ZodiusInfuser
fb7cce6503
Added other files for Keybow2040 2021-02-20 13:35:27 +00:00
ZodiusInfuser
7ac20bfb8b
Added board.c for Keybow2040 2021-02-20 13:35:06 +00:00
ZodiusInfuser
66dd74cd12
Added other files for Tiny2040 2021-02-20 13:33:54 +00:00
ZodiusInfuser
ad8916499d
Added board.c for Tiny2040 2021-02-20 13:32:54 +00:00
Dan Halbert
67406488d1 merge from upstream; re-alphabetize 2021-02-19 14:22:50 -05:00
ZodiusInfuser
ee5a48fece
Delete pimoroni_tiny2040 2021-02-19 18:30:29 +00:00
ZodiusInfuser
db102ab1ad
Create pimoroni_tiny2040 2021-02-19 18:29:57 +00:00
microDev
b12ccefbe6
uart implementation for rp2040 2021-02-19 18:36:00 +05:30
Jeff Epler
1cd4e4552e
Merge pull request #4219 from jepler/bit_transpose 
Add Bit transpose function to support piopixl8
 2021-02-18 20:29:05 -06:00
Jeff Epler
7fd4567893 bitops: rename from _bit_transpose, describe the algorithm 2021-02-18 15:41:23 -06:00
Dan Halbert
53a002a096 Initial fix, but bitbangio timing may be off 2021-02-18 13:14:51 -05:00
Jeff Epler
9cf7d73c6c core: add bit_transpose function 
.. this version can only handle exactly 8 bits "across".  The restriction
may be relaxed in a future revision.
 2021-02-18 11:32:47 -06:00
microDev
696d212dc7
fix nvm rewrite 2021-02-18 18:42:00 +05:30
Jeff Epler
ab5eb86118 raspberrypi: implement os.urandom 
Since the datasheet cast some doubt on the strength of the "rosc_hw->randombit",
I use the SHA256 hash function to create a high quality random seed
from random values of uncertain entropy, as well as to generate a sequence
of random values from that seed using SHA256 as a cryptographically-secure
random number generator.

In practice, it produces over 100kB/s of random data which does not
have any gross problems according to _PractRand_.
 2021-02-17 17:49:25 -06:00
Dan Halbert
0b8f1b9a90 wip: usb_cdc.serials 2021-02-15 20:06:18 -05:00
Dan Halbert
93d788543c Merge remote-tracking branch 'adafruit/main' into secondary-cdc 2021-02-15 20:03:53 -05:00
Dan Halbert
0ec99b37e0 handle 100% duty cycle; improve actual_frequency calc 2021-02-13 13:16:49 -05:00
Dan Halbert
d54b5861a3 wip 2021-02-12 19:01:14 -05:00
Dan Halbert
3e4328140c fix off-by-one PWM top issue 2021-02-12 15:53:31 -05:00
Jeff Epler
ff1942cff6 Enable protomatter on RP2040 builds 
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it.  That's what pausing inside reconstruct
fixes.

So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer.  It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
 2021-02-12 08:25:15 -06:00
microDev
f2d7a5f1e1
Merge branch 'main' into nvm-rp 2021-02-12 18:36:54 +05:30
microDev
527b11f99e
implement suggested changes 
- update FLASH_FIRMWARE length
- use linker script define value
 2021-02-12 18:28:48 +05:30
Dan Halbert
08f30fedf5
Merge pull request #4188 from ladyada/main 
QT Py with RP2040
 2021-02-11 22:19:56 -05:00
lady ada
6c914b8722 QT Py with RP2040 2021-02-11 19:21:42 -05:00
Dan Halbert
f0564b4986 merge from upstream; complicated webusb merge 2021-02-11 18:50:02 -05:00
microDev
205837c47b
nvm implementation for rp2040 2021-02-11 12:48:36 +05:30
Scott Shawcroft
191b143e7b
Add PWM based audio playback 
See
https://learn.adafruit.com/circuitpython-essentials/circuitpython-audio-out
to get started.

Fixes #4037
 2021-02-09 15:38:33 -08:00
Scott Shawcroft
b19c700d4a
Merge pull request #4165 from DavePutz/issue_4143 
Issue 4143 - Fixed marking a PWM slice incorrectly as variable frequency
 2021-02-09 14:30:39 -08:00
root
9a28f0bf45 Fix check for variable PWM frequency 2021-02-09 15:22:59 -06:00
Dan Halbert
3c99b09993
Merge pull request #4160 from gamblor21/rp2040_neopixel_pin_fix 
RP2040 Set the neopixel pin as output after PIO use
 2021-02-08 17:57:30 -05:00
Dan Halbert
b0ed258302
Merge pull request #4155 from jepler/rpi-pio-background 
rp2pio: Transfer up to 32 bytes before checking background tasks
 2021-02-08 16:34:16 -05:00
gamblor21
386b49c3e1 Set the pin as output after PIO use 2021-02-08 15:13:37 -06:00
Jeff Epler
5423e4966c rp2pio: Transfer up to 32 bytes before checking background tasks 
@Jerryneedell noticed that this problem affected strips short enough
to not use the DMA peripheral, thanks for the hot tip!

Instead of checking for background tasks after every byte transfer,
try up to 32 transfers before attending to background tasks.

This fixes the problem I was seeing on my 5-pixel circuit.

Closes #4135.
 2021-02-08 08:35:07 -06:00
Jason Nichols
ae262cde55 Fix maximum PIO instructions 2021-02-06 10:54:25 -05:00
Scott Shawcroft
22dc7d5359
Update to the very latest SDK w/GP15 restore 
Also adds unique id support

Fixes #4039 and hopefully #4107
 2021-02-05 18:44:06 -08:00
Scott Shawcroft
c6a7b00030
Merge pull request #4137 from ferret-guy/smps-mode-pin-rpi-pico 
Add SMPS mode pin to Raspi Pico pins.c
 2021-02-05 12:12:55 -08:00
Scott Shawcroft
e7438c481e
Merge pull request #4125 from xorbit/main 
Add A3 pin to Raspberry Pi Pico
 2021-02-05 12:08:35 -08:00
Mark Omo
1292c35d59
Add SMPS mode pin to Raspi Pico pins.c 
Add SMPS mode pin to Raspi Pico pins.c; see section "4.3. Using the ADC" of the Pico datasheet for discussion. 

Driving this pin high forces the onboard regulator into a lower noise PWM mode.
 2021-02-05 11:09:40 -07:00
Patrick Van Oosterwijck
a158dde628 Add alternate name VOLTAGE_MONITOR for A3 2021-02-05 10:55:03 -07:00
Dan Halbert
0802b22ed6 usb descriptors all set; rework of enabling for USB devices 2021-02-04 19:23:40 -05:00
Jeff Epler
6e153d9948 raspberrypi: implement reset, reset_to_bootloader 
This makes all the following work:
 * normal microcontroller.reset()
 * reset into safe mode or UF2 bootloader via microcontroller.on_next_reset()
 * reset into UF2 bootloader via the "1200 baud trick"

The implementation of reset_cpu is from micropython.
 2021-02-04 12:07:50 -06:00
Patrick Van Oosterwijck
d357a05870 Add A3 pin to Raspberry Pi Pico 
We want to be able to use this to measure VSYS.
 2021-02-04 10:44:37 -07:00
BiffoBear
2656c84b01 Initial commit. Edited error messages in .c files 2021-02-03 05:49:40 +07:00
Scott Shawcroft
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp 
RP2040: Support for RTC
 2021-02-01 19:47:44 -08:00
microDev
ec03267035
rtc implementation for rp2040 2021-02-02 00:00:00 +05:30
Dan Halbert
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc 
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
 2021-02-01 12:50:37 -05:00
Scott Shawcroft
17cf03c8e4
Merge pull request #4083 from microDev1/watchdog-rp 
RP2040: Support for WatchDog
 2021-01-31 19:45:38 -08:00
microDev
34fe152fcf
extend include path 2021-01-30 14:00:14 +05:30
James Bowman
acbf66dacc Make sys.platform "RP2040" on raspberrypi 
[#4091]
 2021-01-29 12:33:37 -08:00
James Bowman
067f42b4f8 Add Gameduino 3X Dazzler support on raspberry_pi_pico 
Tested with hardware. Looks good.

Follow on from #4054
 2021-01-29 12:25:59 -08:00
root
67f128c0cf Fixing microcontroller.cpu on muti-core cpus and adding microcontroller.cpus 2021-01-28 14:42:39 -06:00
microDev
a54b57ea40
watchdog implementation for rp2040 2021-01-28 15:15:15 +05:30
Dan Halbert
29e672fe86
Merge pull request #4071 from tannewt/rp2040_uart_error 
Raise an error on UART use
 2021-01-26 15:22:02 -05:00
Dan Halbert
a9227e15d0
Merge pull request #4063 from dhalbert/rp2040-gp15 2021-01-26 13:38:41 -05:00
Scott Shawcroft
b42e94ee2c
Raise an error on UART use 2021-01-26 08:48:30 -08:00
Dan Halbert
be4cfdd3d6 Use TOTAL_GPIO_COUNT instead of magic number 30 2021-01-25 22:16:24 -05:00
Dan Halbert
0fa5aa359d Stop treating pin 15 specially. 2021-01-25 16:07:01 -05:00
Dan Halbert
69c71bd522 fix some build errors 2021-01-25 11:54:10 -05:00
Dan Halbert
1e97d384ff add GP15 2021-01-25 11:02:32 -05:00
Dan Halbert
69869e1439 CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup 2021-01-24 23:10:20 -05:00
Scott Shawcroft
de6b05a17b
Fix DigitalInOut.pull on RP2040 
It used to always return None.

Fixes #4035
 2021-01-22 19:00:37 -08:00
Dan Halbert
e8e8c593ac move longint choice to mpconfigport.mk 2021-01-21 22:50:15 -05:00
root
f39ca0a1d6 Adding longing support on RP2040 2021-01-21 16:42:16 -06:00
root
3aab17c98e Adding longint support on RP2040 2021-01-21 16:40:57 -06:00
Scott Shawcroft
b73b30ff9f
Switch to upstream TinyUSB 2021-01-21 11:33:13 -08:00
Scott Shawcroft
b47fd08b20
copy editing 2021-01-21 10:17:40 -08:00
Scott Shawcroft
b0f7fd933f
type fix 2021-01-20 23:33:00 -08:00
Scott Shawcroft
6a6f22b0e6
pre-commit 2021-01-20 23:30:15 -08:00
Scott Shawcroft
48721584f9
Temporarily turn off string op overflow check 2021-01-20 19:16:56 -08:00
Scott Shawcroft
733094aead
Add initial RP2040 support 
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.

Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
 2021-01-20 19:16:56 -08:00