Scott Shawcroft
e22eefabd7
First stab at 5.1 update
2023-09-22 10:02:30 -07:00
Scott Shawcroft
d6b284ebb0
Merge pull request #8411 from tannewt/update-idf
...
Update to ESP-IDF 5.0
2023-09-22 09:45:35 -07:00
Scott Shawcroft
8f3c6422ee
Fix MDNS after the user turns off wifi
...
We need to reset our MDNS state instead of just the IDF's.
2023-09-20 14:46:42 -07:00
Scott Shawcroft
d4000023d8
Fix board def mistakes and cast
2023-09-20 11:45:45 -07:00
Dan Halbert
4d175ab41a
convert to MP_DEFINED_CONST_OBJ_TYPE()
2023-09-19 21:09:29 -04:00
Dan Halbert
2c0fa0f7dc
initial merge from v1.20.0; just satisifying conflicts
2023-09-19 11:10:12 -04:00
Scott Shawcroft
e39fbf1b26
Merge pull request #8401 from jepler/i2c-expander-init
...
Fast(ish) special purpose bitbang spi over i2c
2023-09-18 13:19:49 -07:00
Scott Shawcroft
c86b3ae19f
Update to merged idf changes
2023-09-18 11:18:04 -07:00
Jeff Epler
faa6887050
Use faster bus & remove final delay
...
this pushes the LCD initialization down to about 1.3s.
2023-09-18 13:00:18 -05:00
Jeff Epler
67e15bb6a2
makerfabs_tft7: rename properties to match docs
2023-09-18 10:35:49 -05:00
Jeff Epler
75ba82cdb0
lcd_ev: add timings; rename TFT -> TFT_PINS
2023-09-18 10:35:36 -05:00
Jeff Epler
4c682262e6
lcd_ev: fix compile error
2023-09-18 10:35:05 -05:00
Scott Shawcroft
0547ef61f9
Update dotclock for IDF 5.0
2023-09-15 14:43:37 -07:00
Jeff Epler
2a78d16b54
add board.DISPLAY
2023-09-15 14:49:29 -05:00
Jeff Epler
68af5543af
set up display at reset (yayay!)
2023-09-15 14:46:28 -05:00
Jeff Epler
cff65bbbe2
esp32 lcd ev: fix pin assignments
2023-09-15 14:10:32 -05:00
Wind-stormger
970e61c8b4
Update bpi_leaf_s3
2023-09-15 02:20:46 +00:00
Scott Shawcroft
4087960dfd
Fix MDNS. C3 works
2023-09-14 15:04:07 -07:00
Scott Shawcroft
952118f6c3
Update new boards. Reduce memory use in S2
2023-09-14 11:19:38 -07:00
Scott Shawcroft
a3d37122a7
Fix PSRAM address
2023-09-13 11:40:09 -07:00
Scott Shawcroft
f357f4a3af
Size optimize 3 more boards
2023-09-13 11:40:09 -07:00
Scott Shawcroft
99726e255d
Switch to newlib nano
2023-09-13 11:40:09 -07:00
Scott Shawcroft
18fd0045f6
More kconfig updates
2023-09-13 11:40:09 -07:00
Scott Shawcroft
0a9ae1f6ba
Code size optimizations
2023-09-13 11:40:09 -07:00
Scott Shawcroft
cb6b4d0d4a
Fix esp-camera. 32 was dropped so the path doesn't have esp32 in it.
2023-09-13 11:40:09 -07:00
Scott Shawcroft
5937f4c0c0
Hopefully finish updating kconfig
2023-09-13 11:40:09 -07:00
Scott Shawcroft
2a45d95f9d
Use correct flash defaults
2023-09-13 11:40:09 -07:00
Scott Shawcroft
4b29862d30
Clean up more s2 sdkconfig
2023-09-13 11:40:08 -07:00
Scott Shawcroft
1ab083fab7
Support target specific kconfig source
2023-09-13 11:39:51 -07:00
Scott Shawcroft
73e04e84a2
Split out flash and psram settings from sdkconfig
2023-09-13 11:39:10 -07:00
Scott Shawcroft
6043874969
Split out ram dependent configs
2023-09-13 11:36:33 -07:00
Scott Shawcroft
feabf7b6ce
Use kconfiglib in sdkconfig update script
2023-09-13 11:36:33 -07:00
Scott Shawcroft
e90c07ed87
More esp fixing
2023-09-13 11:36:31 -07:00
MicroDev
7a7f1e6efa
fix arch switch statement in ulp
...
Co-authored-by: Casey Webb <caseywebb@protonmail.com>
2023-09-13 11:35:14 -07:00
MicroDev
ba22633fb0
temporarily disable rgbmatrix on espressif
2023-09-13 11:35:14 -07:00
MicroDev
3d2cfa162a
enable paralleldisplay on esp32 and esp32s3
2023-09-13 11:35:14 -07:00
MicroDev
8feb3bad29
refactor board config files
2023-09-13 11:35:14 -07:00
MicroDev
c38972b51c
update ulp implementation
2023-09-13 11:35:14 -07:00
MicroDev
242a720593
fix psram crash
2023-09-13 11:35:14 -07:00
MicroDev
7b9c87e432
update espressif ble sdkconfig
2023-09-13 11:35:14 -07:00
MicroDev
931ed7c6e5
conditionally include esp_psram and fix sdkconfig
2023-09-13 11:35:11 -07:00
MicroDev
a18e015888
update idf to v5.0
2023-09-13 11:33:51 -07:00
Dan Halbert
f13edcc583
Merge pull request #8396 from tirtharajsinha/8.2.x
...
fixing the wrong rx,tx gpio related issue in 8.2.x for board waveshare-esp32-s3-pico
2023-09-13 12:05:32 -04:00
Tirtharaj Sinha
5191071d5d
fixing the wrong rx,tx gpio related issue.
2023-09-13 20:44:40 +05:30
Dan Halbert
9f1d52601e
merge from 8.2.x
2023-09-12 20:14:30 -04:00
Bill Sideris
9acc542957
Deinit all the pins.
2023-09-12 23:25:01 +03:00
Dan Halbert
843fca1874
Merge pull request #8388 from bill88t/espcam-deinit
...
[ESPCAMERA] Deinit all the pins.
2023-09-12 12:53:08 -04:00
Scott Shawcroft
4563c35908
Merge pull request #8385 from n3o59hf/add_m5stack_atoms3u
...
Add M5Stack AtomS3U
2023-09-11 13:46:03 -07:00
Bill Sideris
6e9c21baba
Deinit all the pins.
2023-09-11 23:35:54 +03:00
Jeff Epler
5a96696025
This board got a KICKIN marketing name
2023-09-11 13:46:08 -05:00
Elviss Kustans
92eaf6236f
Add M5Stack AtomS3U
2023-09-09 01:38:08 +00:00
Scott Shawcroft
885dbec599
Merge pull request #8357 from eightycc/memorymap
...
Add memorymap support to RP2 port
2023-09-08 11:28:11 -07:00
Scott Shawcroft
0928a95bb2
Merge pull request #8351 from jepler/dotclockframebuffer
...
Dotclockframebuffer
2023-09-07 13:21:29 -07:00
Jeff Epler
0196401d08
reduce reserved psram
2023-09-07 13:01:16 -05:00
Jeff Epler
eb060184c2
Add hack tablet
2023-09-07 12:59:42 -05:00
Dan Halbert
4dd45b6dc6
Merge pull request #8374 from dhalbert/new-certificates-submodule
...
Update TLS certificates and use new certificates submodule
2023-09-07 10:19:05 -04:00
Dan Halbert
aaa23df649
Merge pull request #8372 from tirtharajsinha/8.2.x
...
8.2.x backport waveshare-esp32-s3-pico
2023-09-07 08:50:59 -04:00
Dan Halbert
bc44571384
Merge pull request #8375 from UnexpectedCircuitPython/fs3_changes
...
Added UM FeatherS3 second I2C STEMMAQT
2023-09-06 23:13:46 -04:00
Seon Rozenblum
e71c39736e
Added UM FeatherS3 second I2C STEMMAQT
2023-09-07 12:13:37 +10:00
Dan Halbert
58a21326b2
Update to new certificates submodule.
2023-09-06 19:36:48 -04:00
Scott Shawcroft
d7edec67ce
8.2.x backport Added Arduino Nano ESP32-S3
2023-09-06 11:43:07 -07:00
Tirtharaj Sinha
896be9edb3
added precommit
2023-09-06 23:12:47 +05:30
Tirtharaj Sinha
1eb8822feb
added SCL and SDA
2023-09-06 22:47:34 +05:30
Tirtharaj Sinha
0c0b927843
added waveshare_esp32_s3_pico for circuitpython version 8.2.x
2023-09-06 21:48:41 +05:30
Jeff Epler
6153d23ed8
Fix build with no psram
...
these are conditionally-defined identifiers so have to use if defined.
2023-09-05 21:30:35 -05:00
Scott Shawcroft
b100041bf7
Merge pull request #8190 from makermelissa/arduino-nano-esp32s3
...
Added Arduino Nano ESP32-S3
2023-09-05 14:31:08 -07:00
Scott Shawcroft
442f84d0e6
Merge pull request #8345 from tannewt/s3_watchdog
...
Forbidden pins are now correctly "in use" on ESP
2023-09-05 13:25:42 -07:00
Jeff Epler
5e26862b2c
Allow use of CONFIG_SPIRAM_USE_CAPS_ALLOC
...
.. and switch makerfabs tft7 over to it as a test.
We have our existing way of "reserving" PSRAM for esp-idf (we actually
control it all but add back the "reserved" part). However, this does
not work with off the shelf esp_lcd, which only will allocate a
framebuffer in PSRAM if CONFIG_SPIRAM_USE_CAPS_ALLOC (or CONFIG_SPIRAM_USE_ALLOC)
is defined, not if CONFIG_SPIRAM_USE_MEMMAP is.
This new way is possibly compatible with more esp-idf code, but it complicates
CircuitPython's initial startup since nothing until port_heap_init is
permitted to use the CP heap or supervisor allocator. In practice this
seems to be OK today.
Right now this doesn't change the setting across all boards with PSRAM and so
it does not revert esp-idf to its prior state. Instead, what I'm thinking is
that we can do it during or just after the IDF5 update when sdkconfig files
will be getting an overhaul anyway.
2023-09-05 12:43:22 -05:00
Jeff Epler
b7d1147f67
Bump the stack size of the uart task
...
With DEBUG build and a consle UART, this would occur early during startup on makerfabs tft7:
```
I (0) cpu_start: Starting scheduler on APP CPU.
I (10) uart: queue free spaces: 20
***ERROR*** A stack overflow in task uart_event_task has been detected.
Backtrace: 0x403786f2:0x3fce9f40 0x403820a9:0x3fce9f60 0x403850da:0x3fce9f80 0x40383a7d:0x3fcea000 0x40382158:0x3fcea030 0x4038214e:0xa5a5a5a5 |<-CORRUPTED
```
Decoded backtrace was not enlightening:
```
0x403786f2: panic_abort at /home/jepler/src/circuitpython/ports/espressif/build-makerfabs_tft7/esp-idf/../../esp-idf/components/esp_system/panic.c:408
0x403820a9: esp_system_abort at /home/jepler/src/circuitpython/ports/espressif/build-makerfabs_tft7/esp-idf/../../esp-idf/components/esp_system/esp_system.c:137
0x403850da: vApplicationStackOverflowHook at /home/jepler/src/circuitpython/ports/espressif/build-makerfabs_tft7/esp-idf/../../esp-idf/components/freertos/port/xtensa/port.c:407
0x40383a7d: vTaskSwitchContext at /home/jepler/src/circuitpython/ports/espressif/build-makerfabs_tft7/esp-idf/../../esp-idf/components/freertos/tasks.c:3505
0x40382158: _frxt_dispatch at /home/jepler/src/circuitpython/ports/espressif/build-makerfabs_tft7/esp-idf/../../esp-idf/components/freertos/port/xtensa/portasm.S:436
0x4038214e: _frxt_int_exit at /home/jepler/src/circuitpython/ports/espressif/build-makerfabs_tft7/esp-idf/../../esp-idf/components/freertos/port/xtensa/portasm.S:231
0x00000000: ?? ??:0
```
Adding an additional 512 bytes of stack allowed CircuitPython to start
successfully.
2023-09-05 12:07:09 -05:00
Jeff Epler
6784e0e720
Ensure debug is defined earlier
2023-09-05 12:06:57 -05:00
Melissa LeBlanc-Williams
7fe6cf5ed6
Set D13 to input with Pulldown
2023-09-01 15:03:08 -07:00
Melissa LeBlanc-Williams
8d6f9d06df
merge branch main
2023-09-01 14:42:53 -07:00
Jeff Epler
84aadf3a64
Update TFT experiment for rev b
2023-09-01 12:58:00 -05:00
Bob Abeles
66b3eccaf6
8334: RP2040 lacks raw memory map access
2023-08-31 20:25:20 -07:00
Jeff Epler
5f12e0f9b8
Revert mistaken change
2023-08-31 14:53:31 -05:00
Jeff Epler
554f529fdf
Per review notes, make esp_lcd and esp32-camera unconditional
2023-08-31 14:52:54 -05:00
Jeff Epler
80a1d1a20a
Add support for a non-displayed left portion of screen
2023-08-31 14:52:26 -05:00
Melissa LeBlanc-Williams
06ccd41294
Remove frozen libs from Funhouse
2023-08-31 13:15:51 -05:00
Tirtharaj Sinha
da3dfd7b5a
added new board - esp32 s3 pico
2023-08-31 04:15:25 +05:30
Jeff Epler
1ef4e3c738
Add Adafruit TFT Experiment (rev A)
...
There will be a revision but get the basics in for now.
This successfully displays on a TL040HDS20-B1502A screen with:
```
import board
from framebufferio import FramebufferDisplay
from dotclockframebuffer import DotClockFramebuffer
from displayio import release_displays
tft_pins = board.TFT
tft_timings = {
"frequency": 6_500_000,
"width": 720,
"height": 720,
"hsync_pulse_width": 20,
"hsync_front_porch": 40,
"hsync_back_porch": 40,
"vsync_pulse_width": 10,
"vsync_front_porch": 40,
"vsync_back_porch": 40,
"hsync_idle_low": False,
"vsync_idle_low": False,
"de_idle_high": False,
"pclk_active_high": False,
"pclk_idle_high": False,
}
release_displays()
fb = DotClockFramebuffer(**tft_pins, **tft_timings)
disp = FramebufferDisplay(fb)
```
2023-08-30 15:05:07 -05:00
Jeff Epler
7dbf9a9b56
fix vprintf_adapter build error
2023-08-30 11:34:01 -05:00
Jeff Epler
9dcc0b5056
fix those pesky pid/vid duplicates
2023-08-30 10:58:52 -05:00
Jeff Epler
fb15c7ca51
Fix timings table & remove redundant comment
2023-08-30 10:50:16 -05:00
Jeff Epler
9e0993af5b
Add espressif esp32s3 lcd devkit
...
This is not working/tested. The display requires an initialization sequence,
and its SPI bus is on the other side of an I2C GPIO expander making things
more difficult.
2023-08-30 10:31:47 -05:00
Jeff Epler
494aee62b3
Add makerfabs 7" 800x480 TFT
...
this is working, though it has to be down-clocked to 6.5MHz to prevent
display glitching
2023-08-30 10:30:54 -05:00
Jeff Epler
ed9cacf41d
Add DotClockFramebuffer
2023-08-30 10:30:15 -05:00
Scott Shawcroft
9daccc08c5
Forbidden pins are now correctly "in use" on ESP
...
This removes duplicate code to make debug UART pins in use via
never reset. It is done through forbidden pins automatically now.
Fixes #8288
2023-08-28 15:55:14 -07:00
Scott Shawcroft
b20e211d29
Merge pull request #8293 from fonix232/port/esp32/m5paper
...
Add support for M5Stack M5Paper
2023-08-28 12:53:37 -07:00
Jeremy Littler
9bdb576351
Add files via upload
2023-08-28 10:10:04 -04:00
Jeremy Littler
c1144e66a8
Add files via upload
2023-08-28 10:09:06 -04:00
Jeff Epler
b0967cb1a4
Use QSTR_GLOBAL_REQUIREMENTS to give explicit dependency for qstr generation
...
I investigated and found that this seems to be the best way to specify
a file that must be generated before "qstr processing" can occur.
Closes #8337
2023-08-27 16:16:40 -05:00
Scott Shawcroft
ab70f8eace
Merge remote-tracking branch 'adafruit/main' into i2s_mclk
2023-08-24 15:07:14 -07:00
Jozsef Kiraly
4f7e66df08
fix: pre-commit
2023-08-22 15:17:40 +01:00
Jozsef Kiraly
2ec145ba6c
fix: Minor fixes for M5Paper
2023-08-22 11:44:52 +01:00
Jeff Epler
d62bf6631b
Use a different way to force building sdkconfig early
...
the `Makefile:...` version broke the shared bindings matrix generation, as
it would fail if esp-idf wasn't in the environment (and we wouldn't want
it to do that much work anyway)
2023-08-21 20:48:42 -05:00
Jeff Epler
44c26d9d41
Ensure sdkconfig.h is built early, by making Makefile depend on it
...
Here's why this helps fix the build error:
If this file does not exist or is out of date, then it is generated
and then the Makefile is re-read.
I don't know why this worked before but stopped now; it must have
to do with the rework of header generation in the MP build system.
2023-08-20 11:08:43 -05:00
Jeff Epler
e74ef8b960
ringbuf_alloc no longer has a long-lived argument
2023-08-20 10:15:56 -05:00
Jeff Epler
a3a9c7a098
fix typo
2023-08-20 10:15:55 -05:00
Dan Halbert
e43c2fb7ba
pre-commit uncrustify
2023-08-18 22:53:14 -04:00
Dan Halbert
d9ed21ea07
pre-commit
2023-08-18 13:30:45 -04:00
Dan Halbert
6851faacaa
Merge remote-tracking branch 'adafruit/main' into merge-micropython-v1.19.1
2023-08-18 13:29:39 -04:00
Jozsef Kiraly
37352cf7ec
fix: Apply pre-commit patch
2023-08-18 11:22:26 +01:00
Jozsef Kiraly
37d807509f
port: Add M5Stack M5Paper board target
2023-08-17 21:22:26 +01:00
Scott Shawcroft
8c5c73df38
Add I2S MCLK support to iMX RT
2023-08-17 11:39:14 -07:00
Kattni Rembor
8b147ac748
Add SD_CS pin to Metro ESP32-S3 board definition.
2023-08-15 18:30:59 -04:00
Kattni Rembor
3012c275e7
Add SD_CS pin.
2023-08-15 18:09:42 -04:00
Dan Halbert
d582407b06
pre-commit fixes
2023-08-14 00:59:22 -04:00
Dan Halbert
2171e67c1b
merge latest adafruit/main
2023-08-13 19:43:54 -04:00
Dan Halbert
27c7807693
silabs build needs work; other builds are working
2023-08-13 19:05:16 -04:00
Melissa LeBlanc-Williams
9d69ddc583
Add D0 and D1
2023-08-14 00:20:47 +02:00
Melissa LeBlanc-Williams
4c62db2d05
Add D pins
2023-08-14 00:20:24 +02:00
Melissa LeBlanc-Williams
8dd52430b6
Change to octal ram
2023-08-14 00:18:50 +02:00
Melissa LeBlanc-Williams
1b3993a29e
Added initial Adafruit Metro ESP32-S3
2023-08-14 00:17:24 +02:00
Dan Halbert
10b94796c0
wip; fix more m_malloc and gc_alloc
2023-08-11 00:30:34 -04:00
Melissa LeBlanc-Williams
7a4edfaa9f
Override D13 pin
2023-08-09 08:19:34 -07:00
Melissa LeBlanc-Williams
ab638d4bf2
Merge branch 'main' of https://github.com/adafruit/circuitpython into arduino-nano-esp32s3
2023-08-09 08:08:03 -07:00
Dan Halbert
0d2c3c3f08
wip: continuing compilation fixes; mp_obj_alloc everywhere
2023-08-07 20:45:57 -04:00
Melissa LeBlanc-Williams
1d3b2b019a
Update settings to match micropython
2023-08-04 08:54:22 -07:00
Melissa LeBlanc-Williams
3158315ac3
Merge branch 'main' of https://github.com/adafruit/circuitpython into arduino-nano-esp32s3
2023-08-04 08:48:37 -07:00
Jeff Epler
84d8224a54
set reserved psram for pycamera
2023-08-04 08:38:07 -05:00
Dan Halbert
465d1c673e
wip
2023-08-03 23:29:00 -04:00
Scott Shawcroft
9cc4b4cd37
Merge pull request #8245 from jepler/esp32-camera-backlight-solarize
...
pycamera: backlight, solarize
2023-08-02 10:00:21 -07:00
Jeremy Littler
f7cc20e936
Update pins.c
2023-08-02 11:01:44 -04:00
Jeremy Littler
f9b98ce54d
Update pins.c
2023-08-02 10:57:46 -04:00
Jeremy Littler
b88e359b00
Update pins.c
2023-08-02 10:41:46 -04:00
Jeremy Littler
37dbe3e24a
Update pins.c
2023-08-02 10:32:40 -04:00
Jeremy Littler
94ed725fd3
Update mpconfigboard.h
2023-08-02 10:24:58 -04:00
Jeff Epler
4e01e6bbe5
adafruit-esp32s3-camera: set up backlight at boot & add solarize
...
the backlight situation will be revisited with the next board prototype,
but it's good to prove this can be done.
Depends on https://github.com/adafruit/esp32-camera/pull/6 which should
be merged before this.
2023-08-02 08:09:13 -05:00
Jeff Epler
2b0f1cd087
espressif: fix dependencies in esp-idf modules
...
while developing esp-camera I had the problem that firmware.elf was
not regenerated if the only file I edited was in the esp32-camera
submodule.
By telling make that $(IDF_CMAKE_TARGETS), the list of .a fliles
produced by ninja-building esp-idf, depend on esp-idf-stamp and that
firmware.elf in turn depends on these files, the ninja build is re-run
on each make, which is reasonably quick if nothing needs to be rebuilt.
2023-08-02 07:52:45 -05:00
Scott Shawcroft
8baff0bf88
Merge pull request #8133 from dronecz/main
...
Add ES3ink board definition
2023-08-01 13:31:46 -07:00
Scott Shawcroft
0bf50d2d6e
Merge pull request #8215 from makermelissa/adafruit-metro-esp32s3
...
Added initial Adafruit Metro ESP32-S3
2023-08-01 13:30:06 -07:00
Dan Halbert
0d4bc8c163
initial v1.19.1 merge; not compiled yet
2023-08-01 13:50:05 -04:00
Jeff Epler
272a2dcdb0
Merge pull request #8218 from jepler/esp32-camera
...
Update the camera board to use ESP32-S3 microcontroller
2023-07-31 14:48:50 -05:00
KB Sriram
d5daa7ad27
boards/beetle-esp32-c3: fix sdkconfig minor typo.
...
Fixes https://github.com/adafruit/circuitpython/issues/8239
2023-07-30 22:13:10 -07:00
Melissa LeBlanc-Williams
e931a526f1
Merge branch 'main' of https://github.com/adafruit/circuitpython into arduino-nano-esp32s3
2023-07-27 19:27:16 -07:00
Melissa LeBlanc-Williams
45b1c42be5
Add D0 and D1
2023-07-27 19:26:37 -07:00
Melissa LeBlanc-Williams
ffb1cf116d
Add D pins
2023-07-27 16:46:15 -07:00
Melissa LeBlanc-Williams
3d210bfa45
Merge branch 'main' of https://github.com/adafruit/circuitpython into adafruit-metro-esp32s3
2023-07-27 16:33:19 -07:00
Jeff Epler
020e4d2e0c
update camera submodule
2023-07-26 12:55:44 -05:00
Jeff Epler
46d7771152
tinyuf2 adopted the partition scheme called "1ota"
...
.. which irritated our partition table parser in build_memory_info, so
make it work again.
2023-07-26 09:41:10 -05:00
Jeff Epler
c516870f89
switch camera to use the no-ota partition scheme
...
this gives us a comfortable few hundred kB flash space left for the app
1398912 bytes used, 763776 bytes free in flash firmware space out of 2162688 bytes (2112.0kB).
2023-07-26 08:38:59 -05:00
Jeff Epler
9edd8957a1
Add a "4MB without OTA" partition scheme
...
This is needed on the camera board, because we have a lot of code.
2023-07-26 08:38:30 -05:00
Jeff Epler
f503b37b2b
espressif: allow setting FLASH_SDKCONFIG at board level
2023-07-26 08:32:25 -05:00
Jeff Epler
9a18524c30
simplify circuitpy_mpconfig with enable-if-any, -all
...
and make corresponding simplifications in shared-bindings-matrix,
but directly using the final defines from CFLAGS instead of the
status quo.
The net changes are to disable audiocore & audiomixer on some espressif
devices that have no audio output at all. Other than that, the
shared-bindings-matrix seems to be identical.
2023-07-25 19:56:08 -05:00
Melissa LeBlanc-Williams
6030d87025
Change to octal ram
2023-07-25 16:30:21 -07:00
Jeff Epler
fd60cccb06
Re-enable ulab at the expense of some other modules
...
.. and gate audiomixer based on audiocore (should be no net change)
.. and get rid of now-redundant enables in the espressif mpconfigport
2023-07-25 16:01:11 -05:00
ladyada
45b6c84cdd
Merge branch 'main' of github.com:ladyada/circuitpython
2023-07-25 16:13:47 -04:00
ladyada
767b7a0506
compiling
2023-07-25 16:12:53 -04:00
Limor "Ladyada" Fried
1303fe5378
Merge branch 'adafruit:main' into main
2023-07-25 16:10:42 -04:00
Tod Kurt
ae0ebfef2f
ESP32 synthio channels to 12
2023-07-24 23:03:34 -04:00
