update espressif ble sdkconfig

ports/espressif/esp-idf-config/sdkconfig-ble.defaults

@@ -1,164 +1,16 @@
-#
-# Component config
-#
-#
-# Bluetooth
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
 #
 CONFIG_BT_ENABLED=y
-#
-# Bluetooth controller
-#
-CONFIG_BT_CTRL_MODE_EFF=1
-CONFIG_BT_CTRL_BLE_MAX_ACT=10
-CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10
-CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
-CONFIG_BT_CTRL_PINNED_TO_CORE=0
-CONFIG_BT_CTRL_HCI_MODE_VHCI=y
-# CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
-CONFIG_BT_CTRL_HCI_TL=1
-CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
-# CONFIG_BT_CTRL_HW_CCA is not set
-CONFIG_BT_CTRL_HW_CCA_VAL=20
-CONFIG_BT_CTRL_HW_CCA_EFF=0
-CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG=y
-# CONFIG_BT_CTRL_CE_LENGTH_TYPE_CE is not set
-# CONFIG_BT_CTRL_CE_LENGTH_TYPE_SD is not set
-CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF=0
-CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0=y
-# CONFIG_BT_CTRL_TX_ANTENNA_INDEX_1 is not set
-CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF=0
-CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0=y
-# CONFIG_BT_CTRL_RX_ANTENNA_INDEX_1 is not set
-CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF=0
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N27 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N24 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N21 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N18 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N15 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N12 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N9 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N6 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N3 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N0 is not set
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3=y
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P6 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P12 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P15 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P18 is not set
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=10
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
-CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
-# CONFIG_BT_CTRL_BLE_SCAN_DUPL is not set
-# CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
-#
-# MODEM SLEEP Options
-#
-# CONFIG_BT_CTRL_MODEM_SLEEP is not set
-# end of MODEM SLEEP Options
-
-CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
-CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
-CONFIG_BT_CTRL_HCI_TL_EFF=1
-# CONFIG_BT_CTRL_AGC_RECORRECT_EN is not set
-# end of Bluetooth controller
-
-# CONFIG_BT_BLUEDROID_ENABLED is not set
 CONFIG_BT_NIMBLE_ENABLED=y
-# CONFIG_BT_CONTROLLER_ONLY is not set
-#
-# NimBLE Options
-#
-CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_INTERNAL=y
-# CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_DEFAULT is not set
-# CONFIG_BT_NIMBLE_LOG_LEVEL_NONE is not set
-# CONFIG_BT_NIMBLE_LOG_LEVEL_ERROR is not set
-# CONFIG_BT_NIMBLE_LOG_LEVEL_WARNING is not set
-CONFIG_BT_NIMBLE_LOG_LEVEL_INFO=y
-# CONFIG_BT_NIMBLE_LOG_LEVEL_DEBUG is not set
-CONFIG_BT_NIMBLE_LOG_LEVEL=1
-CONFIG_BT_NIMBLE_MAX_CONNECTIONS=3
-CONFIG_BT_NIMBLE_MAX_BONDS=3
-CONFIG_BT_NIMBLE_MAX_CCCDS=8
-CONFIG_BT_NIMBLE_L2CAP_COC_MAX_NUM=0
-CONFIG_BT_NIMBLE_TASK_STACK_SIZE=4096
-CONFIG_BT_NIMBLE_ROLE_CENTRAL=y
-CONFIG_BT_NIMBLE_ROLE_PERIPHERAL=y
-CONFIG_BT_NIMBLE_ROLE_BROADCASTER=y
-CONFIG_BT_NIMBLE_ROLE_OBSERVER=y
+
+CONFIG_BT_NIMBLE_LOG_LEVEL_NONE=y
+
 CONFIG_BT_NIMBLE_NVS_PERSIST=y
-CONFIG_BT_NIMBLE_SM_LEGACY=y
-CONFIG_BT_NIMBLE_SM_SC=y
-# CONFIG_BT_NIMBLE_DEBUG is not set
-# CONFIG_BT_NIMBLE_SM_SC_DEBUG_KEYS is not set
-CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME="nimble"
-CONFIG_BT_NIMBLE_GAP_DEVICE_NAME_MAX_LEN=31
-CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU=256
-CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE=0
+
 CONFIG_BT_NIMBLE_ACL_BUF_COUNT=20
-CONFIG_BT_NIMBLE_ACL_BUF_SIZE=255
 CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
-CONFIG_BT_NIMBLE_HCI_EVT_HI_BUF_COUNT=30
-CONFIG_BT_NIMBLE_HCI_EVT_LO_BUF_COUNT=8
-CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT=12
-# CONFIG_BT_NIMBLE_HS_FLOW_CTRL is not set
-CONFIG_BT_NIMBLE_RPA_TIMEOUT=900
-# CONFIG_BT_NIMBLE_MESH is not set
-CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS=y
-CONFIG_BT_NIMBLE_HS_STOP_TIMEOUT_MS=2000
-# CONFIG_BT_NIMBLE_HOST_BASED_PRIVACY is not set
-CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=y
-CONFIG_BT_NIMBLE_MAX_CONN_REATTEMPT=3
+
 CONFIG_BT_NIMBLE_EXT_ADV=y
-CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=1
-CONFIG_BT_NIMBLE_MAX_EXT_ADV_DATA_LEN=1650
-CONFIG_BT_NIMBLE_ENABLE_PERIODIC_ADV=y
-CONFIG_BT_NIMBLE_MAX_PERIODIC_SYNCS=1
-# CONFIG_BT_NIMBLE_BLUFI_ENABLE is not set
-CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
-# end of NimBLE Options
 
-# end of Bluetooth
-
-# end of Component config
-
-#
-# Deprecated options for backward compatibility
-#
-# CONFIG_BLUEDROID_ENABLED is not set
-CONFIG_NIMBLE_ENABLED=y
-CONFIG_NIMBLE_MEM_ALLOC_MODE_INTERNAL=y
-# CONFIG_NIMBLE_MEM_ALLOC_MODE_DEFAULT is not set
-CONFIG_NIMBLE_MAX_CONNECTIONS=3
-CONFIG_NIMBLE_MAX_BONDS=3
-CONFIG_NIMBLE_MAX_CCCDS=8
-CONFIG_NIMBLE_L2CAP_COC_MAX_NUM=0
-CONFIG_NIMBLE_TASK_STACK_SIZE=4096
-CONFIG_NIMBLE_ROLE_CENTRAL=y
-CONFIG_NIMBLE_ROLE_PERIPHERAL=y
-CONFIG_NIMBLE_ROLE_BROADCASTER=y
-CONFIG_NIMBLE_ROLE_OBSERVER=y
-CONFIG_NIMBLE_NVS_PERSIST=y
-CONFIG_NIMBLE_SM_LEGACY=y
-CONFIG_NIMBLE_SM_SC=y
-# CONFIG_NIMBLE_DEBUG is not set
-# CONFIG_NIMBLE_SM_SC_DEBUG_KEYS is not set
-CONFIG_NIMBLE_SVC_GAP_DEVICE_NAME="nimble"
-CONFIG_NIMBLE_GAP_DEVICE_NAME_MAX_LEN=31
-CONFIG_NIMBLE_ATT_PREFERRED_MTU=256
-CONFIG_NIMBLE_SVC_GAP_APPEARANCE=0
-CONFIG_NIMBLE_ACL_BUF_COUNT=20
-CONFIG_NIMBLE_ACL_BUF_SIZE=255
-CONFIG_NIMBLE_HCI_EVT_BUF_SIZE=70
-CONFIG_NIMBLE_HCI_EVT_HI_BUF_COUNT=30
-CONFIG_NIMBLE_HCI_EVT_LO_BUF_COUNT=8
-CONFIG_NIMBLE_MSYS1_BLOCK_COUNT=12
-# CONFIG_NIMBLE_HS_FLOW_CTRL is not set
-CONFIG_NIMBLE_RPA_TIMEOUT=900
-# CONFIG_NIMBLE_MESH is not set
-CONFIG_NIMBLE_CRYPTO_STACK_MBEDTLS=y
-CONFIG_SW_COEXIST_ENABLE=y
-# end of Deprecated options for backward compatibility
+CONFIG_BT_CTRL_BLE_SCAN_DUPL=n