Commit Graph

1014 Commits

Author SHA1 Message Date
Sean Cross 4cca455c9b nrf: reset rtc as part of port_reset()
On NRF, the `rtc_reset()` function is never called.  As a result,
calls to `time.time()` return a cryptic error>

```
>>> import time
>>> time.time()
'' object has no attribute 'datetime'
>>>
```

This is because `MP_STATE_VM(rtc_time_source)` is not initialized
due to `rtc_reset()` never being called.

If `CIRCUITPY_RTC` is enabled, call `rtc_reset()` as part of the
`reset_port()` call. This ensures that `time.time()` works as expected.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-20 16:44:18 +08:00
Scott Shawcroft 916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
Sean Cross c1bcc25b88 nrf: _bleio: clean up timeout calculation
The timeout value is calculated by the common-hal layer now, so we don't
need to be quite so clever about calculating it here.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 21:56:39 +08:00
Sean Cross 34f91f01c6 bleio: adapter: add advertising timeout and status
Add a field to allow specifying a timeout when initiating advertising.
As part of this, add a new property to determine if the device is still
advertising.

Additionally, have the `anonymous` property require a timeout, and set
the timeout to the maximum possible value if no timeout is specified.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:19 +08:00
Sean Cross cfe65742a3 _bleio: support anonymous advertising
Add a new parameter to the `start_advertising()` function to enable
anonymous advertising.  This forces a call to `sd_ble_gap_privacy_set()`
with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and
`private_addr_type` set to
`BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`.

With this, addresses will cycle at a predefined rate (currently once
every 15 minutes).

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:18 +08:00
Scott Shawcroft 2c2b53303d
Merge pull request #2837 from k0d/serial-debug
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
Mark Olsson 007c92ee6a Enable showing the console on a debug uart 2020-05-19 02:02:52 +02:00
Scott Shawcroft cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2 2020-05-18 16:46:41 -07:00
Sean Cross 9f7c26c60d nrf: port: call common_hal_rtc_init() during init
Call the new function to set the RTC, or reset it if the offset is not
valid.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:30 +08:00
Sean Cross 83680c41db nrf: rtc: persist rtc offset across reboots
Store the RTC value in the .uninitialized section, but make sure to
flank it with some known values.  That way we can determine if the RTC
value has been initialized, or if it's random uninitialized garbage.

As part of this, add a `common_hal_rtc_init()` routine to determine if
the value is correct, or reset it to 0 if it is not valid.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:27 +08:00
Sean Cross 3b5f5ddaa6 nrf: port: move saved word into .uninitialized section
Circuit Python supports saving a single word of data across reboots.
Previously, this data was placed immediately following the .bss.

However, this appeared to not work, as Circuit Python zeroes out the
heap when it starts up, and the heap begins immediately after the .bss.

Switch to using the new .uninitialized section in order to store this
word across resets.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:25 +08:00
Sean Cross 192bb155fa nrf: port: move the heap after .uninitialized
Previously, it was placed following .bss.  However, now that there is a
new section after .bss, the heap must be moved forward.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:20 +08:00
Sean Cross f002c784c0 nrf: linker: add a new .uninitialized section
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.

The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
cyz 4f7b4241a2 add hiibot_bluefi 2020-05-18 09:42:37 +08:00
Scott Shawcroft 3c1469b0a5
Add port_fixed_stack for more builds 2020-05-15 16:22:33 -07:00
Jeff Epler eb876e21c3 nrf: code style 2020-05-13 10:40:41 -05:00
Jeff Epler 011acf41c0 nrf: Ensure ticks enabled while playing audio 2020-05-13 10:40:36 -05:00
Scott Shawcroft bc40034a08
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 12:12:51 -07:00
Daniel Pollard ee2cb703c8 merged master 2020-05-12 14:41:28 +10:00
Sean Cross ffaeeda749 nrf: simmel: decrease flash filesystem size
The flash filesystem must be reduced in order to allow the current
build to fit.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross f7fcd43516 nrf: simmel: disable SPIM3
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross 370fc7293a nrf: support disabling SPIM3
SPIM3 is faster than all other SPI blocks, and is capable of generating
a 32 MHz clock.  However, it cannot be used at the same time as the BLE
radio without dedicating an additional 8 kB of RAM to it.

Therefore, some boards may want to disable this.  Support pre-defining
NRFX_SPIM3_ENABLED on the command line to disable it on some bords.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross 79c055f958 nrf: simmel: enable aesio
This adds AES support to simmel.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross 235098efb8 nrf: simmel: correct CSn pin
The CSn pin is pin 6 on bank 1, not bank 0.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Scott Shawcroft 62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go
add nRF52840 based Makerdiary Pitaya Go
2020-05-11 16:34:27 -07:00
Daniel Pollard bfa5cd9c13 refactor countio based on feedback 2020-05-05 15:23:38 +10:00
Dan Halbert b7836aeac6 address review comments 2020-05-04 19:51:08 -04:00
Dan Halbert bae7a5e433 make translate again 2020-05-04 17:26:59 -04:00
Dan Halbert d6c6f9f4f0 add PacketBuffer .incoming_ and .outgoing_packet_length 2020-05-04 15:59:45 -04:00
Dan Halbert 4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100
nrf: add pca10100
2020-05-04 10:51:01 -04:00
Sean Cross b128399d1e nrf: simmel: enable CIRCUITPY_USB_HID
Simmel had USB HID disabled in order to save space.  However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID.  This in turn caused HID to be included
in the USB Configuration Descriptor.

For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython.  However, in the most recent version this has rightfully
caused asserts to appear during configuration.

Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
Sean Cross cb4fc894d7 nrf: add pca10100
This is the nRF52833-DK board.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:07:49 +08:00
Yihui Xiong 7dd3ddc06b use Nordic's VID which seems to be allowed
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
2020-05-01 06:10:43 +00:00
Scott Shawcroft 1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-30 13:25:31 -07:00
Scott Shawcroft 74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout
Update teknikio bluebird pin assignments
2020-04-30 11:50:02 -07:00
JoeBakalor 36a71560c2 update teknikio bluebird pin assignments 2020-04-30 09:58:27 -04:00
Yihui Xiong 4393a88fb6 add nRF52840 based Makerdiary Pitaya Go 2020-04-30 07:38:20 +00:00
Dan Halbert 241d7e2ae6 change many ifndefs to ?= 2020-04-29 23:31:34 -04:00
Dan Halbert f3078511a6 further cleanup and bug fixing 2020-04-29 23:18:08 -04:00
Sean Cross 6aac9233db nrf: bluetooth: add s147 v7.0.1 softdevice hexfile
This was not added as part of the initial v7.0.1 patchset because
.hex files are in this project's .gitignore, and so git ignored it.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-30 10:43:46 +08:00
Dan Halbert 180f5c6a94 Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes 2020-04-29 22:11:22 -04:00
Dan Halbert 3d62f87e29 back to '.packet_size' for compatiblity 2020-04-29 22:10:56 -04:00
Dan Halbert 84cee1ab8d rename and improve PacketBuffer packet length property 2020-04-29 17:49:31 -04:00
Scott Shawcroft a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-29 10:51:21 -07:00
Sean Cross 1d0781bf12 nrf: add simmel board
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
TG-Techie b9e494b85a add submodule to TG-Watch02A 2020-04-28 00:03:02 -04:00
TG-Techie 76b466a38a add submodule to TG-Watch02A 2020-04-27 22:49:30 -04:00
Scott Shawcroft 755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Scott Shawcroft 9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb
Update tinyusb
2020-04-26 20:55:36 -07:00
Scott Shawcroft 5c7f6e6211
Remove empty #if and add missing includes. 2020-04-24 11:48:55 -07:00
Dan Halbert 982a755eae
Merge pull request #2801 from simmel-project/nrf-s140-7.0.1
Add NRF S140 7.0.1
2020-04-23 21:59:51 -04:00
Sean Cross 689dd61379 nrf: nrf52833: use s140 v7.0.1
Previously, we were using v6.1.1 which worked, but was unsupported.
v7.0.1 is the first version of s140 that supports the nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-22 13:34:11 +08:00
Sean Cross 09bef7b0e1 nrf: bluetooth: add s140 v7.0.1
This is the first version with official support for nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-22 13:33:39 +08:00
Dan Halbert 2f86e31501 fix calculation of nrf firmware size 2020-04-22 00:52:54 -04:00
Dan Halbert fbc8719fad ringbuf tested 2020-04-21 22:40:12 -04:00
Dan Halbert 77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert 38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Sean Cross c04e6d6f52 nrf: bleio: parameterize softradio configuration
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations.  If a
parameter is unspecified then the previously-defined value is used.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:59 +08:00
Sean Cross 3537ad4059 nrf: mpconfigport: support configuration of various sizes
Conditionally set variables such as the softdevice RAM size, bootloader
size, and the spi m3 buffer size.  This allows ports to adjust these
values to suit their needs.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:58 +08:00
Sean Cross 33720af0c6 nrf: mpconfigport: subtract config size from firmware size
The BLE Config area needs to be subtracted from the size of the firmware.
THis is because the firmware is counted by walking backwards from the end
of memory, and the BLE config area is placed lower in memory than the
firmware.  Subtracting the BLE config size ensures the internal flash
filesystem doesn't try to use the firmware as storage.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:57 +08:00
Sean Cross 3ed5b87b8f nrf: add support for nrf52833
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
Sean Cross 4ad1cbeea3 nrf: make rgbmatrix and framebufferio optional
Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0
in their .mk file in order to prevent these from being built.  This
is necessary for resource-constrained devices.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 10:44:21 +08:00
Sean Cross 066f486b28 nrf: supervisor: support building without BUSIO
Only initialize i2c, spi, and uart if building with BUSIO.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 10:44:20 +08:00
Sean Cross ac9d336f40 nrf: make neopixel support optional
Add a conditional around the call to neopixel_write(), allowing us
to build for nrf without neopixel support.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 09:56:27 +08:00
Scott Shawcroft bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
Jeff Epler 5fcc6d6286 RGBMatrix: finish renaming from Protomatter
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
Jeff Epler 3d6258f63d Rename Protomatter -> RGBMatrix
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
Jeff Epler a32337718d Rename _protomatter -> protomatter
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
Scott Shawcroft 7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
Scott Shawcroft b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler 1d8a073c05 nrf: protomatter port 2020-04-14 18:24:58 -05:00
Jeff Epler 09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Scott Shawcroft 7e69d30c02
Fix nRF PulseIn 2020-04-03 14:22:56 -07:00
Scott Shawcroft 8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Scott Shawcroft cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server
Fix PacketBuffer server support
2020-03-31 13:39:34 -07:00
Jeff Epler 54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
Scott Shawcroft 798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
siddacious 9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
siddacious 7bba79363a allowing backlight change 2020-03-25 22:41:23 -07:00
Scott Shawcroft 8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling 2020-03-25 17:41:47 -07:00
Scott Shawcroft 3551b769a2
Fix connection handle tracking in PacketBuffer when a server. 2020-03-25 13:31:18 -07:00
William Moser c961ed9025 Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files 2020-03-24 13:25:02 -04:00
Jeff Epler d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Scott Shawcroft 76ca13b6ed
Fix SAMD51 pulsein 2020-03-13 17:21:15 -07:00
Scott Shawcroft 48b5f2a384
Initial work on SAMD 2020-03-13 11:16:41 -07:00
Scott Shawcroft affd3fcc2a
Clear the pending IRQ in the NVIC as well. 2020-03-13 11:16:38 -07:00
Scott Shawcroft 00d5f63e7c
Hopefully fix PulseIn 2020-03-13 11:12:31 -07:00
Scott Shawcroft ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well. 2020-03-13 11:12:31 -07:00
Scott Shawcroft 418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD 2020-03-13 11:12:31 -07:00
Scott Shawcroft 6f60afe8c5
First try at lowering the power consumption 2020-03-13 11:12:30 -07:00
Scott Shawcroft 85f44e20cb
Merge pull request #2695 from TG-Techie/master
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
TG-Techie 197dc344af fix requested changes 2020-03-12 02:31:13 -04:00
TG-Techie b967a2071f changed TG-Watch02A HW_BOARD_NAME 2020-03-10 23:07:25 -04:00
TG-Techie 50b451ae0c add TG-Watch02A board def 2020-03-10 22:40:55 -04:00
TG-Techie fec84054d9 ah 2020-03-06 15:03:37 -05:00
TG-Techie 7198056bc3
Merge pull request #2 from adafruit/5.0.x
5.0.x
2020-03-06 13:57:31 -05:00
Dan Halbert 210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Jeff Epler da31acfcc4 Merge remote-tracking branch 'origin/master' into ulab 2020-03-03 20:13:53 -06:00
Dan Halbert 8435935429 update uses of assert_pin_free; remove redundant checks 2020-02-29 15:37:32 -05:00
Dan Halbert b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
Jeff Epler eef742bf45 oofatfs: Remove _FS_DISK_READ_ALIGNED
This workaround is no longer needed, so it can be removed.

Closes: #2332
2020-02-28 10:04:28 -06:00
Jeff Epler 1e6c08fc30 nrf: sqpi_flash: Handle unaligned reads 2020-02-28 10:03:37 -06:00
TG-Techie 527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie 6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
Jeff Epler fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
ladyada 86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
Scott Shawcroft 28c7a1e9c3
Fix crash after empty REPL session
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
Dan Halbert f63b2c0d0c use realloc instead 2020-02-21 17:36:15 -05:00
Dan Halbert 9cf46ec947 put neopixel_write buffer in root pointers 2020-02-21 08:44:25 -05:00
Dan Halbert 23d6a3dc1f merge from upstream 2020-02-20 22:27:16 -05:00
Dan Halbert 634d246910 relicense nrf SPI.c to MIT 2020-02-20 16:00:21 -05:00
Dave Marples 24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples 490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Dan Halbert dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft e97b0cfc61
Merge pull request #2581 from jamesbowman/master
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
Dan Halbert e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Dan Halbert 2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Drew Fustini 3bf4b42e2e change OH20 badge pin defs to use SWn for buttons
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
Drew Fustini 0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
Dan Halbert 005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert 857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Dan Halbert a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error
Add another error message to BLE
2020-02-05 23:39:17 -05:00
James Bowman acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
Scott Shawcroft 72a1bdab30
Add another error message for extended advertisements at the same
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
Dan Halbert b6da2fa173 nrf: fix i2c frequency setting 2020-02-05 11:25:31 -05:00
James Bowman 7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
[adafruit/circuitpython#2578]
2020-02-03 16:46:14 -08:00
Lady Ada 5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling 64cafe82bc Adjust OHS2020 madctl for default rotation
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
Michael Welling 6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
Michael Welling 33dcdd7c03 Updates to enable working SPI TFT
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
Michael Welling d99c2ffe4f QSPI flash fixes
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
Lady Ada dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert 4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Dan Halbert b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Scott Shawcroft 298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes
nrf: track vm_used_ble better
2020-01-30 10:33:19 -08:00
Dan Halbert 87f73e2729 track vm_used_ble better 2020-01-30 09:52:06 -05:00
hierophect 898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland 100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Wojtek Siudzinski df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Scott Shawcroft b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev
Refine iMX RT memory layout and add three boards
2020-01-27 14:11:08 -08:00
Lady Ada f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Dan Halbert 68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Scott Shawcroft 1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Michael Welling cc77e86408 Update the VID and USB company string
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 15:43:49 -08:00
Michael Welling cc03d68984 Fix backlight pin registration
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 14:53:07 -08:00
Michael Welling 86d454adf3 Initial board support for OHS2020 Badge
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 13:46:56 -08:00
Scott Shawcroft 8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm
nrf: Add bonding to BLE pairing support
2020-01-15 16:11:09 -08:00
Benny Meisels 4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00