djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27,181 Commits 21 Branches 274 Tags 785 MiB
e69397468d
Commit Graph

564 Commits

Author SHA1 Message Date
Scott Shawcroft
d2860b58b0
Check background pending before sleep 
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.

Fixes #5086 and maybe others.
 2021-08-19 12:18:13 -07:00
Kattni Rembor
ae923db06d Add SPEAKER_ENABLE pin to MacroPad. 2021-08-18 17:30:42 -04:00
Scott Shawcroft
0390f812be
Fix RP2040 I2C instance check 2021-08-18 08:55:52 -07:00
Scott Shawcroft
a5143d284b
Merge pull request #5161 from ZodiusInfuser/patch_micropy 
Removed unnecessary defines from Pimoroni board files
 2021-08-17 12:40:12 -07:00
Scott Shawcroft
abe8638f41
Merge pull request #5160 from ZodiusInfuser/patch_tiny2040 
Removed default UART, SPI and I2C from Tiny2040 config
 2021-08-16 14:54:52 -07:00
ZodiusInfuser
2255ab1486 Removed unnecessary Micropy and Ignore defines 2021-08-16 16:40:12 +01:00
ZodiusInfuser
5fb507c3ff Removed default UART SPI and I2C from Tiny2040 config 2021-08-16 16:31:31 +01:00
Scott Shawcroft
de796e2304
Move OneWire to onewireio from busio 
This will allow finer grained inclusion in 8.0.0

Fixes #5135
 2021-08-12 10:47:14 -07:00
Scott Shawcroft
9c77d2653f
Merge pull request #5099 from ZodiusInfuser/main 
Added definitions for some upcoming Pimoroni LED driver boards
 2021-08-12 09:27:21 -07:00
ZodiusInfuser
47c8ff0570 Removed unnecessary defines 2021-08-11 23:34:20 +01:00
Scott Shawcroft
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod 
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
 2021-08-11 12:19:16 -07:00
Dan Halbert
4608877c12 address review comments 2021-08-11 12:10:49 -04:00
Dan Halbert
35aac3d26b display SPI now 10MHz; set PWM duty cycle to zero at stop to quiet output 2021-08-11 10:48:53 -04:00
Dan Halbert
24e61a7da8 Track more carefully which audio buffers to fill, based on interrupt channels 2021-08-10 22:00:09 -04:00
ZodiusInfuser
e587bd7dc0 Added final USB PIDs 2021-08-10 11:17:06 +01:00
Chris Wilson
e741330ca8 Consistent pin naming for SparkFun MicroMod processor boards. 2021-08-09 23:10:52 -07:00
Dan Halbert
2451c788f4 valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad 2021-08-09 09:47:13 -04:00
Dan Halbert
59b89fdc5c Fix various audio DMA issues: 
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`

RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
 2021-08-09 09:47:13 -04:00
Dan Halbert
2cd80d1074 wip, with debugging printf's 2021-08-09 09:47:13 -04:00
Dan Halbert
fd71d924d2 partial buffer mgmt fix 2021-08-09 09:47:13 -04:00
ZodiusInfuser
f707fa107a Tweaks to Interstate75 pinout 2021-08-05 15:00:47 +01:00
ZodiusInfuser
11ed759cf9 Tweaks to Plasma2040 pinout 2021-08-05 13:01:50 +01:00
Jeff Epler
ac4b10bcd9 It's "shared-module", not "shared-modules" 2021-08-03 10:37:47 -05:00
ZodiusInfuser
6663dacedb Added board configurations for Plasma and Interstate 2021-08-03 14:01:56 +01:00
Dan Halbert
a358e5f58a Add board-specific pico-sdk settings; set xosc multipler for Adafruit boards 2021-07-30 18:50:21 -04:00
Scott Shawcroft
9e54606ba1
Set output low in SIO 2021-07-28 09:00:36 -07:00
Scott Shawcroft
4be904fd4a
Switch to gpio mux to disable/enable pwm signal 2021-07-27 12:38:18 -07:00
Scott Shawcroft
e87e1d8175
Block when setting duty_cycle until the new value is taken 2021-07-27 12:37:35 -07:00
Scott Shawcroft
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch 2021-07-26 18:48:59 -07:00
Scott Shawcroft
412eb87080
Switch to pin, frequency and duty_cycle PulseOut 
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0

This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.

Most of the way for #3264

Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
 2021-07-26 18:35:49 -07:00
Tod Kurt
0d401e7bc8 fix whitespace on new flash chip for Arduino Nano RP2040 2021-07-24 13:22:02 -07:00
Tod Kurt
dcd5b5ab50 added Arduino Nano RP2040 Connect alternate flash chip 2021-07-24 13:12:44 -07:00
Nathan Young
04ce6a6e8c Check jmp_pin specified when JMP PIN opcodes used 2021-07-23 13:35:20 +02:00
Nathan Young
8221a12cf6 Added support for specifying the JMP pin (RP2 PIO) 2021-07-22 18:39:04 +02:00
Scott Shawcroft
109bd2886b
Fix Arduino RP2040 flash size 
For RP2040 boards, we now change the default flash size based on
the configured flash. We will still try to read the size from the
flash first.

Fixes #4874
 2021-07-21 11:02:55 -07:00
Scott Shawcroft
8723a0335f
Merge pull request #5032 from DavePutz/multi_pulseout 
Moved global variables to support multiple RP2040 PulseOuts
 2021-07-21 10:26:17 -07:00
Scott Shawcroft
e14923028f
Merge pull request #5030 from dhalbert/update-to-raspberrypi-pico-sdk-1.2.0 
Update pico-sdk to 1.2.0, using raspberrypi repo
 2021-07-21 08:14:13 -07:00
root
b2d6203c63 fix formatting 2021-07-21 10:05:09 -05:00
root
0559fcd1c0 Moved global variables to support multiple PulseOuts 2021-07-21 09:52:17 -05:00
Scott Shawcroft
db0adf1253
Merge pull request #5025 from DavePutz/issue_5016 
Turn off PWM pin during PulseOut construct
 2021-07-20 17:25:10 -07:00
root
8fe4fa0114 Turn off PWN pin during PulseOut construct 2021-07-20 17:17:41 -05:00
Dan Halbert
0293ec261a Update pico-sdk to 1.2.0, using raspberrypi repo 2021-07-20 17:31:29 -04:00
Dan Halbert
128bedae7e
Merge pull request #5019 from DavePutz/issue_5016 
Ensure RP2040 pin is left low after PulseOut
 2021-07-19 17:57:42 -04:00
Dan Halbert
d2f2afe57b
Merge pull request #4925 from microDev1/update-run-mode 
Add RunMode.UF2 and update esp32s2 run-modes
 2021-07-19 16:37:46 -04:00
root
8d79d4e5ee Ensure pin is left low after PulseOut 2021-07-19 11:46:09 -05:00
microDev
3c25d8e2a0
Merge pull request #5013 from DavePutz/issue_5012 
Issue #5012 - RP2040 moved globals to PulseIn object to fix multiple instances
 2021-07-19 00:21:55 +05:30
root
43275e0b0d Made suggested changes (mostly) 2021-07-18 12:00:37 -05:00
microDev
9ac607dffa
update run-mode 
- add microcontroller.RunMode.UF2
- add UF2, NORMAL and BOOTLOADER run-modes to esp32s2
 2021-07-18 00:00:58 +05:30
root
1c80696746 iFix formatting 2021-07-16 17:18:06 -05:00
root
588a19a1ab Issue #5012 - Moved globals to PulseIn object to fix multiple instances 2021-07-16 15:59:08 -05:00
Scott Shawcroft
bba611336c
Merge pull request #4964 from DavePutz/issue_4937 
Fix for issue #4937 - Implement minimum PulseOut time
 2021-07-16 11:29:32 -07:00
root
eebddbb16d Change min pulse calculation 2021-07-15 21:27:23 -05:00
Scott Shawcroft
c2685970af
Merge pull request #4987 from DavePutz/issue_4983 
Fix for Issue #4983 - stop state machine before restarting
 2021-07-13 12:16:33 -07:00
root
5c9823d8cb Change order of operations in restart 2021-07-13 11:17:03 -05:00
root
490f263a41 Added code to reset SM program counter during a restart 2021-07-12 14:09:11 -05:00
root
9d5fbea7a3 Fix for Issue #4983 - stop state machine before restarting 2021-07-11 21:02:28 -05:00
root
0ea750b2d0 Fix handling of short pulses 2021-07-11 16:38:24 -05:00
DavePutz
25e799e51a
Add LED and GP25 for Cytron Maker Pi Pico 2021-07-09 20:49:59 -05:00
Scott Shawcroft
58fdf9e940
Merge pull request #4975 from DavePutz/issue_4945 
Issue #4945 - handle multiple PulseIns
 2021-07-09 11:03:16 -07:00
root
4046b0fb0a Issue #4945 - handle multiple PulseIns 2021-07-08 14:09:21 -05:00
Dan Halbert
ab52a92704 Disallow ctrl-C interrupts of RP2040 SPI and PIO 2021-07-08 13:42:24 -04:00
Dan Halbert
a843b8a0d4 Merge remote-tracking branch 'adafruit/main' into rp2040-audio-and-spi-fixes 2021-07-08 08:22:21 -04:00
Dan Halbert
bd6826496c Fix various RP2040 audio dma things: (see detailed commit message) 
1. Check for correct error values from dma_claim_unused_channel.
2. Introduce a .stereo flag for simplicity.
3. Clarify PWM carrier frequency choice.
4. Start introducing quiescent audio value. Still need to ramp up/down.
5. Redo audio stop logic a bit.
6. Fix (unrelated) displayio dependency things.

There is still an interference problem between other DMA users and audio. Still debugging this.
 2021-07-08 08:14:49 -04:00
root
f98ec0cfd6 Fix formatting 2021-07-06 14:43:46 -05:00
root
bfa777c55a Add check for timer success 2021-07-06 14:34:15 -05:00
Daniel Griswold
2519b06478 fix spi definition 2021-07-06 01:15:32 -04:00
root
b2e72b2912 fix formatting 2021-07-05 23:13:18 -05:00
root
6e4613f1a1 Fix formatting 2021-07-05 12:30:26 -05:00
root
9814386d2e Fix for issue #4937 - Implement minimum pulseout time 2021-07-05 11:38:05 -05:00
Dan Halbert
33bbb8b1f4 RP2040 PWMAudioOut: Release DMA channels after play has finished. 2021-07-01 17:36:29 -04:00
Radomir Dopieralski
b8c4f7d685 MacroPad RP2040: Add initialization for the OLED display 2021-06-29 17:38:14 +02:00
Kattni Rembor
2c2d541e7c Adding pins to match silk and other RP2040 boards. 2021-06-28 17:10:15 -04:00
Scott Shawcroft
061d3a16ff
Merge pull request #4911 from DavePutz/issue_4908 
Fix for issue #4908 - pulseout leaving line high
 2021-06-24 15:32:48 -07:00
Dan Halbert
836db4e4a1
Merge pull request #4816 from hierophect/rp2040-alarms 
RP2040: add Alarm module
 2021-06-24 08:15:57 -04:00
root
ab1d7429f1 Fix for issue #4908 - pulseout leaving line high 2021-06-23 21:09:27 -05:00
Lucian Copeland
1f3d69d87c Clean up sleep memory, mark as not-implemented 2021-06-20 17:57:51 -04:00
Jeff Epler
268717e427 ParallelImageCapture: Switch to taking a list of pins 
.. adopting validate_pins from RGBMatrix into shared-bindings

.. updating other platforms for API change
 2021-06-10 11:15:18 -05:00
Ben Clifford
5c835adb10 Correct pull-down direction in parameter documentation for rp2pio 2021-06-09 20:39:56 +00:00
Limor "Ladyada" Fried
c1c101ca2d
Merge pull request #4864 from ladyada/main 
macropad rev B definion and fix for SH110x addressing
 2021-06-07 21:59:56 -04:00
Lucian Copeland
b6a268fca4 Further deinit additions 2021-06-07 14:13:59 -04:00
Lucian Copeland
63c1791d87 Merge remote-tracking branch 'upstream/main' into rp2040-alarms 2021-06-07 14:11:41 -04:00
Lucian Copeland
f2149edbd2 Add deinit to new boards 2021-06-07 12:48:12 -04:00
lady ada
2ff9e9766f handclang 2021-06-07 12:39:59 -04:00
Limor "Ladyada" Fried
c4f685aab1
Merge pull request #4865 from ZodiusInfuser/pimoroni_boards 
Added definition for upcoming Pimoroni RP2040 board
 2021-06-07 11:13:01 -04:00
lady ada
3890271f19 turn off all neopix when booting 2021-06-06 18:30:17 -04:00
lady ada
01195c2089 update to rev B 2021-06-06 15:57:41 -04:00
Scott Shawcroft
bc014cecb5
Merge pull request #4859 from DavePutz/hcsr04_fix 
Fix pulsein pause and resume functions to handle HCSR04
 2021-06-04 13:26:05 -07:00
root
57334c812e Fix pulsein pause and resume functions to handle HCSR04 2021-06-04 12:10:41 -05:00
ZodiusInfuser
af7557b53b
Updated with final USB PID 2021-06-04 16:02:32 +01:00
Jeff Epler
a99eba35b8
Merge pull request #4809 from DavePutz/issue_4266 
Fix for Issue #4266 - second PWMAudioOut interferes with the first one
 2021-06-03 19:08:28 -05:00
ZodiusInfuser
6011db3aec Added board definition 2021-06-03 15:49:23 +01:00
Dan Halbert
6af36757a7 lengthen RP2040 xosc startup time 2021-06-02 08:50:20 -04:00
root
8761e4bfd7 Initialize pacing timer 2021-05-30 12:12:38 -05:00
Kong Wai Weng
b06ec0a776 Added libraries dependency. 2021-05-30 09:57:00 +08:00
root
a2b220370e Fix formatting issue 2021-05-29 12:26:41 -05:00
root
760e8c77bd Changes to correct repeat playing on a channel 2021-05-29 11:55:10 -05:00
Kong Wai Weng
ebe4d90ac3 Updated the copyright information. 2021-05-29 10:12:22 +08:00
Lucian Copeland
feff243e8f Add RTC deep sleep alarm support 2021-05-28 13:52:05 -04:00
Kong Wai Weng
ebda9e07f4 Use 4 spaces instead of tab. 2021-05-29 01:04:13 +08:00
Kong Wai Weng
bfcb8c5896 Do not use neopixel as status LED. Also removed the unused definition. 2021-05-29 00:47:14 +08:00
Kong Wai Weng
5920ac647a Modified the essential files for Maker Pi RP2040. 2021-05-28 22:42:54 +08:00
Kong Wai Weng
321e5dd16f Use underscore instead of dash for board name. 2021-05-28 18:01:02 +08:00
Lucian Copeland
24041f34b0 Merge remote-tracking branch 'upstream/main' into rp2040-alarms 2021-05-27 18:40:40 -04:00
Lucian Copeland
8e1892ac6f Implement RP2040 Alarm module 
Adds light and deep sleep functionality for the TimeAlarm and PinAlarm
alarm categories. Adds board deinit for all platforms.
 2021-05-27 18:33:29 -04:00
Kong Wai Weng
da7c74f614 Initial commit. 2021-05-27 18:02:52 +08:00
root
24e641a834 Fix for Issue #4266 2021-05-25 16:06:00 -05:00
Scott Shawcroft
038c9d6194
Merge pull request #4796 from Neradoc/nera-pwmrgb-status-pimoroni 
Enable the PWM status LED on Pimoroni Tiny 2040 and PicoSystem
 2021-05-24 13:30:55 -07:00
lady ada
2e90d5ed07 clang a bit 2021-05-22 12:39:42 -04:00
lady ada
d52f149e84 add ESP CS pin to make wifi demos easier 2021-05-22 12:22:28 -04:00
lady ada
ac855afb48 Some pin neatening and updated PID to unused Adafruit one! 2021-05-22 11:57:46 -04:00
BlitzCityDIY
14dbec7c04 Merge branch 'main' of https://github.com/blitzcitydiy/circuitpython into main 2021-05-22 01:02:21 -04:00
BlitzCityDIY
9f4eb48e70 Updating MISO 
While testing WIFI realized MISO was defined incorrectly
 2021-05-22 01:02:06 -04:00
BlitzCityDIY
352281e23e Adding Arduino Nano RP2040 Connect 
Re-commiting to fix local GitHub config issues. Adding CircuitPython support for the Arduino Nano RP2040 Connect. Have tested all digital and analog I/O, I2C, onboard LSM6DSOX. Uses the AT25SF128A external flash.
 2021-05-21 20:44:11 -04:00
Neradoc
6808d04d53 enable the PWM status LED on Pimonoroni Tiny 2040 and PicoSystem 2021-05-21 20:13:30 +02:00
Scott Shawcroft
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led 2021-05-20 08:35:15 -07:00
Scott Shawcroft
642fbcf87a
Handle status led power 
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
 2021-05-19 10:57:14 -07:00
Scott Shawcroft
9dabe882f1
Fix safe mode on rp2040 2021-05-19 10:18:43 -07:00
Limor "Ladyada" Fried
b667736110 Merge branch 'adafruit:main' into main 2021-05-18 20:55:55 -04:00
lady ada
d8b895f1d7 add LED and speaker - natch! 2021-05-18 20:53:13 -04:00
ladyada
cec9015e19 iz makropad with oled 2021-05-18 11:09:03 -04:00
root
9393467819 Update comment for spelling 2021-05-17 22:13:00 -05:00
root
ff4b1b28d2 iFormatting fixes 2021-05-17 16:43:55 -05:00
root
11ef36d09d Implement pulseout for RP2040 2021-05-17 16:24:45 -05:00
Scott Shawcroft
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking 
Fix endpoint checking; Clean up safe mode printing
 2021-05-14 11:25:01 -07:00
Dan Halbert
fa6c06fb38 count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:59:02 -04:00
Scott Shawcroft
1a0b4193b7
Simplify the status LED to save power 
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
 2021-05-13 14:41:20 -07:00
lady ada
502b66eac0 moar trinkz 2021-05-11 22:03:05 -04:00
nm3210
a3de9bda5f Swap mis-labelled D0/D1 pins on SparkFun Pro Micro RP2040 2021-05-08 21:35:37 -04:00
Scott Shawcroft
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13 2021-05-06 11:17:53 -07:00
Scott Shawcroft
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod 2021-05-05 17:51:52 -07:00
Dan Halbert
d2b558993e merge from main, including MicroPython 1.12 merge 2021-05-03 20:56:04 -04:00
Dan Halbert
8b8968101d
Merge pull request #4691 from nm3210/sparkfunthingplusrp2040_boardupdate 
Update Sparkfun Thing Plus RP2040 pins to match board breakouts
 2021-05-03 09:27:19 -04:00
Jeff Epler
da19e8e2d7 Merge remote-tracking branch 'origin/main' into fix-codeformat-subdirs 2021-04-30 15:31:08 -05:00
nm3210
929ee8d3b4 Fix pre-commit whitespace error 2021-04-30 14:16:13 -04:00
Scott Shawcroft
d93a9a1dbc
Merge pull request #4683 from DavePutz/issue_4661 
Issue #4661 - Wrap pulsein values when maxlen is exceeded.
 2021-04-30 11:07:54 -07:00
Jeff Epler
e95e921ca1 codeformat: Fix filename matching 
In #4683, tannewt noticed that uncrustify was not running on some
file in common-hal.

I investigated and found that it was not being run on a bunch of paths.

Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.

I spot-checked some specific filenames after this change, and all looks good:

```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py  ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.

Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```

As a side-effect, a bunch more files are re-formatted now. :-P
 2021-04-30 10:48:08 -05:00
nm3210
9c1466a330 Update Sparkfun Thing Plus RP2040 pins to match board 
This fixes some missing and incorrectly-assigned pins for the SparkFun Thing Plus RP2040 protoboard so that they actually match what the board says. This also changes the default SPI pins from the SD card pins to the breakout pins on the side of the board.
 2021-04-30 09:37:37 -04:00
Kattni Rembor
4d97680cae Fix board definition. 2021-04-29 13:45:39 -04:00
DavePutz
1ec59cd534
Fix up indentation 2021-04-29 12:38:13 -05:00
Kattni Rembor
0bf747870a Fixing board definition. 2021-04-29 12:41:23 -04:00
Dan Halbert
f06d54524d merge from adafruit 2021-04-28 23:48:26 -04:00
root
cfac07c1cc Wrap pulsein when maxlen is exceeded 2021-04-28 11:20:13 -05:00
Scott Shawcroft
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2 
Merge MicroPython v1.11 into CircuitPython
 2021-04-27 11:02:02 -07:00
Scott Shawcroft
f99deeda68
Merge pull request #4668 from DavePutz/issue_4659 
Increased possible pulsein length to ~65 ms.
 2021-04-27 11:01:51 -07:00
root
91739de71a Increased max pulse to 65535 us 2021-04-26 18:52:15 -05:00
Scott Shawcroft
76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
root
5bd1da21a2 Increased possible pulsein length to 32 ms. 2021-04-25 21:38:57 -05:00
Jeff Epler
92919c25c2
Merge pull request #4666 from DavePutz/issue_4660 
Reset buffer index in PulseIn clear
 2021-04-25 20:33:58 -05:00
root
d1861a6b9c Reset buffer index in PulseIn clear 2021-04-25 14:24:21 -05:00
Limor "Ladyada" Fried
f7f6a42f3d
Merge pull request #4663 from zapwizard/patch-1 
Update pins.c
 2021-04-25 15:09:13 -04:00
zapwizard
889da596ff
Update pins.c 
Both D0 and D1 were assigned to pin_GPIO7, fixed D0 to pin_GPIO6, which also matches the comment.
 2021-04-25 13:10:52 -05:00
gamblor21
30f31639d3 Added statemachine deinit 2021-04-25 11:58:22 -05:00
Dan Halbert
9d1fcc3b14 merge from main 2021-04-25 10:27:52 -04:00
Dan Halbert
80f05c76a8
Merge pull request #4654 from dhalbert/6.2.x-merge-1 
Port #4645 to main
 2021-04-24 10:29:52 -04:00
Scott Shawcroft
80e8b4ac14
Merge pull request #4635 from jepler/pcc 
WIP: Implement 'ParallelImageCapture' for samd51
 2021-04-23 13:31:53 -07:00
Dan Halbert
454e78f41f merge #4645 from 6.2.x to main 2021-04-23 13:33:58 -04:00
Jeff Epler
f838ff9528 raspberrypi: Remove debug prints 2021-04-23 09:44:01 -05:00
Jeff Epler
10fee3e673 raspberrypi: Increase PIO clock speed in ParallelImageCapture 
.. this allows DIV_4 and DIV_2 resolutions to work without being
jumbled.
 2021-04-22 12:14:44 -05:00
Jeff Epler
2def016fd0 raspberrypi: Use 32-bit elements in FIFO 
.. these do come in the right
 2021-04-22 12:14:03 -05:00
Jeff Epler
7fb751808f raspberrypi: Implement ParallelImageCapture using PIO 
.. based on code from Phil B.
 2021-04-22 12:02:51 -05:00
Dan Halbert
64e0958916 wip: descriptor building 2021-04-21 23:25:36 -04:00
Dan Halbert
b3ffb3ab1f Return bytes written from RP2040 UART.write() 2021-04-21 18:38:35 -04:00
Limor "Ladyada" Fried
17e419f129
Merge pull request #4633 from ZodiusInfuser/main 
Tweaked Pimoroni board names
 2021-04-19 15:16:37 -04:00
ZodiusInfuser
efdbc6be08 Tweaked board name 2021-04-19 10:38:07 +01:00
Limor "Ladyada" Fried
b6fa90d0b5
Merge pull request #4625 from stonehippo/sparkfun_micromod_atp_rp2040 
Added Sparkfun MicroMod RP2040
 2021-04-18 21:14:47 -04:00
George White
5bd2e97865
Fix pin definitions 
I missed a few pin definitions. Fixed those.
 2021-04-17 18:43:49 -04:00
George White
493127f4bc pre-commit trailing space fixes 2021-04-17 17:43:13 -04:00
George White
e0bb7385a1
Added Sparkfun MicroMod RP2040 
Added board definition for the Sparkfun MicroMod RP2040.

Mostly followed the format for pins from the MicroMod nRF52840 board
definition, as MicroMod tries to standardize pins across
microcontrollers.
 2021-04-17 10:56:04 -04:00
Dan Halbert
b2160bdddd
Add VBUS_SENSE (GP24) to board 
Prompted by https://forums.adafruit.com/viewtopic.php?f=60&t=178237.
Also add some whitespace to make pin aliases stand out, and add GP23 as an alias for `SMPS_MODE`.
 2021-04-17 08:51:20 -04:00
ZodiusInfuser
efa9cfa5ec Tweaked board name 2021-04-16 18:02:10 +01:00
Dan Halbert
f55d684057
Merge pull request #4612 from ZodiusInfuser/main 
Added definitions for Pimoroni RP2040-based boards
 2021-04-15 19:20:24 -04:00
ZodiusInfuser
1c700a82c9 Removed trailing whitespaces 2021-04-15 12:01:47 +01:00
ZodiusInfuser
f69bf8beb9 Removed whitespaces 2021-04-15 11:57:27 +01:00
ZodiusInfuser
d67ccb625c Added correct USB PIDs 2021-04-15 11:41:46 +01:00
ZodiusInfuser
e4456bd756 Added definitions for PicoLipo boards 2021-04-14 23:09:10 +01:00
Scott Shawcroft
3978b50b8d
Merge pull request #4489 from gamblor21/audiomixer_rp2040 
Add non M4 audiomixer support
 2021-04-14 12:19:17 -07:00
Dan Halbert
11b9a5e605
Merge pull request #4577 from dglaude/patch-1 
Respect product name: space between QT and Py
 2021-04-09 13:10:19 -04:00
Dan Halbert
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor 
IncrementalEncoder: factor out the quadrature state machine
 2021-04-09 13:10:02 -04:00
Dan Halbert
61e33a5619 fix nrf ISR; make direction consistent across ports; save code size 2021-04-09 11:07:47 -04:00
Dan Halbert
fdc5bb41f4
D3 pin should be GPIO26 2021-04-08 19:11:27 -04:00
Jeff Epler
3ce0b512f8 rasberrypi: IncrementalEncoder: factor out state machine 2021-04-08 16:25:47 -05:00
David Glaude
5d6bef569d
Respect product name: space between QT and Py 
https://www.adafruit.com/product/4900 say "Adafruit QT Py RP2040"

This is also matching other "QT Py" product.
 2021-04-08 21:50:16 +02:00
Scott Shawcroft
6097afdaa5
Merge pull request #4559 from jepler/rp2-rotary-encoder-fixes 
raspberrypi: Several rotary encoder fixes
 2021-04-06 10:00:26 -07:00
Jeff Epler
1a2ce27b73 raspberrypi: Drop support for auto-reversing swapped encoder 2021-04-06 09:22:59 -05:00
Scott Shawcroft
71eabe814c
Update StateMachine.c 2021-04-05 16:17:08 -07:00
Jeff Epler
fc86475de5 IncrementalEncoder: support swapped pins 
Closes: #4422
 2021-04-04 13:49:50 -05:00
Jeff Epler
93d6ceedd9 IncrementalEncoder: Disconnect interrupt handler during deinit. 
Closes: #4557
 2021-04-04 13:49:41 -05:00
Jeff Epler
bcd90dd927 IncrementalEncoder: There are no out pins. 
Closes #4556
 2021-04-04 13:49:21 -05:00
Jeff Epler
cce8b2be07 raspberypi: Allow mpconfigboard to override additional items 
This allows more options to be overridden to 0 in an mpconfigboard.mk.

Improved:
 * FRAMEBUFFERIO, FULL_BUILD, BITOPS, PWMIO, RGBMATRIX, OTARYIO, PULSEIO, WATCHDOG

Still problematic (pull requests welcome):
 * RP2PIO & NEOPIXEL_WRITE, possibly only if a status neopixel is defined
 * BITBANGIO, possibly only if BUSIO is enabled
 * RTC

Incidentally, with RP2PIO & NEOPIXEL_WRITE, BITBANGIO, and RTC re-enabled I get
```
323956 bytes used, 720524 bytes free in flash firmware space out of 1044480 bytes (1020.0kB).
12072 bytes used, 250072 bytes free in ram for stack and heap out of 262144 bytes (256.0kB).
```

Closes #4515
 2021-03-31 09:40:48 -05:00
Dan Halbert
8e0834d74c Calculate RP2040 SDA hold time 2021-03-29 14:40:13 -04:00
Dan Halbert
03340a3fcd Incorporate https://github.com/adafruit/pico-sdk/pull/2 2021-03-26 18:55:45 -04:00
Dan Halbert
155b61f027
Merge pull request #4378 from Gadgetoid/patch-remove-rp2040-i2c-bitbang 
RP2040: Remove short-write bitbang from I2C
 2021-03-25 21:01:02 -04:00
gamblor21
0b212e2243 Add non M4 audiomixer support 2021-03-25 17:30:40 -05:00
Scott Shawcroft
f79d60b205
Use GCC @file to shorten linker command length 
This hopefully fixes linking on Windows with cmd.exe
 2021-03-24 15:03:33 -07:00
Scott Shawcroft
36edc4bb89
Improve Winbond naming and correct board settings 2021-03-23 09:06:48 -07:00
Scott Shawcroft
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash 2021-03-22 15:29:43 -07:00
Scott Shawcroft
f200e6a21e
Fix doc build and address feedback 2021-03-22 15:24:27 -07:00
lady ada
36ae69ab6f qtpy is more of a button than a switch! add itsybitsy rev C files 2021-03-21 18:44:32 -04:00
lady ada
ebd6011633 add USBBOOT switch, move RX pin, re-enable UART (tested) 2021-03-21 14:58:18 -04:00
Scott Shawcroft
4aea7f8f52
Add requirements-dev.txt for python deps 2021-03-19 15:22:23 -07:00