This fixes a hard lock that happens when using a second channel on an
in use TCC. The lock occurred when setting the duty cycle on the channel
because the hw address was not available to ASF.
Thanks to @ladyada for finding the bug.
rather than 24bit. Setting the period for more than a 16bit number
caused the TCC to be in a weird state where resetting it would hard
crash.
Fixes#153
* Reset SWD lines to SWD rather than GPIO. This makes OpenOCD happier.
* Default speaker enable lines to False for CircuitPlayground to prevent
the speaker from buzzing when no sound is playing. Fixes#126
Also replace use of PINMUX_DEFAULT with PINMUX_UNUSED to prevent any
accidental pin changes. This caused user SPI to break internal SPI
flash on the Feather M0 Express.
Fixes#100
* Track status pin use by user code separately so it can take over the pins and then give them back.
* Switch to hardware SPI for APA102 on Gemma and Trinket.
* Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
This was done to allow greatly granularity when deciding what functionality
is built into each board's build. For example, this way pulseio can be
omitted to allow for something else such as touchio.
This class focuses on the timing sensitive parts of the protocol.
Everything else will be done by Python code.
This also establishes that its OK to back a nativeio class with a
bitbang implementation when no hardware acceleration exists. When
it does, then bitbangio should be used to explicitly bitbang a
protocol.
1) Bus error will be thrown on read/write errors with errno set. (Read didn't used to fail at all.)
2) try_lock correctly returns boolean whether lock was grabbed.
Fixes#87
* Always init SPI to 250k to start for SD cards.
* Add ability to configure byte written during read.
* Add ability to read and write to portions of buffers like existing I2C API.
You can either set it once up front, or set variable_frequency on custruction to
indicate that the frequency must be able to change. This informs whether a timer
can be shared amongst pins.
This also adds persistent clock calibration on atmel-samd. Once the device has
synced its clock frequency over USB it will remember that config value until USB
is used again. This helps ensure the clock frequency is similar on and off USB.
Lastly, this also corrects time.sleep() when on USB by correcting the tick counter.
This prevents corrupting previous functional objects by stealing their pins
out from under them. It prevents this by ensuring that pins are in default
state before claiming them. It also verifies pins are released correctly and
reset on soft reset.
Fixes#4, instantiating a second class will fail.
Fixes#29, pins are now reset too.
Docs are here: http://tannewt-micropython.readthedocs.io/en/microcontroller/
It differs from upstream's machine in the following ways:
* Python API is identical across ports due to code structure. (Lives in shared-bindings)
* Focuses on abstracting common functionality (AnalogIn) and not representing structure (ADC).
* Documentation lives with code making it easy to ensure they match.
* Pin is split into references (board.D13 and microcontroller.pin.PA17) and functionality (DigitalInOut).
* All nativeio classes claim underlying hardware resources when inited on construction, support Context Managers (aka with statements) and have deinit methods which release the claimed hardware.
* All constructors take pin references rather than peripheral ids. Its up to the implementation to find hardware or throw and exception.
