djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
15,076 Commits 21 Branches 274 Tags 785 MiB
a8f5fcc400
Commit Graph

1006 Commits

Author SHA1 Message Date
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk 2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk 2019-12-16 12:18:16 +05:00
Dan Halbert
e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
Dan Halbert
ae64a669dd address review comments 2019-12-11 15:43:06 -05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Jeff Epler
a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Jeff Epler
1905d0746d samd: neopixel: Fix neopixels after #2297 
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.

This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)

Testing performed on a Metro M4:
 * measured timings using o'scope and found all values within
   datasheet tolerance.
 * Drove a string of 96 neopixels without visible glitches
 * on-board neopixel worked

Testing performed on a Circuit Playground Express (M0):
 * Color wheel code works on built-in neopixels
 * Color wheel code works on 96 neopixel strip

As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)

Closes: #2297
 2019-12-07 19:19:45 -06:00
Dan Halbert
d628d2a261 atmel-samd working 2019-12-06 15:18:20 -05:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Scott Shawcroft
fce81e6868
Merge pull request #2297 from jepler/tick-refactor 
Call background tasks only once per ms
 2019-12-02 16:45:51 -08:00
Jeff Epler
002f5c0f1c samd: trinket_m0: make board fit again 2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9 2019-12-02 07:27:03 -06:00
Jeff Epler
95d9c49e43 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-29 11:27:09 -06:00
Jeff Epler
d843156a5e samd: Consolidate small build optimization flags 
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
 2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a Squeeze pyruler zh_Latn_pinyin 2019-11-27 14:47:35 -05:00
Dan Halbert
b32a9192df make UART.write be blocking on SAMD; add timeout property 2019-11-27 13:05:29 -05:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master 
Add shIRtty board
 2019-11-26 15:23:56 -05:00
Dan Halbert
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name 
Set USB_INTERFACE_NAME for winterbloom_sol
 2019-11-26 15:17:14 -05:00
Thea Flowers
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol 2019-11-26 10:59:12 -08:00
Thomas Sarlandie
2647ea0754 fix: disable touchio to save some space 2019-11-26 19:26:18 +01:00
Scott Shawcroft
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space 
Once we use PixelBuf, the library will be much smaller.
 2019-11-26 09:31:44 -08:00
Jeff Epler
82f55dc046 atmel-samd: reduce inlining on constrained boards again 
pewpew10, pirkey_m0, and uchip all fit now.  However, pirkey_m0
now has just 76 bytes flash available.
 2019-11-26 08:50:55 -06:00
Jeff Epler
3ed6de7baf atmel-samd: reduce inlining on pyruler again 
By tweaking the optimizer flags further, this build also fits
 2019-11-26 08:50:55 -06:00
Jeff Epler
2e4a6b94e7 atmel-samd: get most constrained m0 builds to work again 
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
 2019-11-26 08:50:45 -06:00
Thomas Sarlandie
11dc572bce feature: our own PID - thanks @ladyada 2019-11-25 21:56:42 +01:00
Thomas Sarlandie
fc71ed9789 add shirtty board - hackaday supercon 2019 addon 2019-11-25 17:44:41 +01:00
Dan Halbert
1ccb7b4c5e cosmetic commit, mostly to re-run 2019-11-22 16:30:10 -05:00
Dan Halbert
13375d16f1 change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
Jeff Epler
77b78d7fb9 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-22 14:28:51 -06:00
Dan Halbert
e18d3e0f76 Merge branch 'master' into m4-network-ps2io 2019-11-22 15:02:52 -05:00
Dan Halbert
1a62a9cb17 remove network from kicksat_sprite 2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700 turn off network in pewpew_m4 2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874 Merge remote-tracking branch 'adafruit/master' into testing-fixes 2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5 enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00
wallarug
fce7b89087 removed Robo HAT MM1 M0 board. 2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719 add-ndbit6 2019-11-19 14:52:09 -07:00
Jeff Epler
40a47d41df samd: background: Allow monitoring time taken in background task 
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
 2019-11-18 11:01:24 -06:00
Jeff Epler
7f744a2369 Supervisor: move most of systick to the supervisor 
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports.  This mostly would
have broken gamepad tick support on non-samd ports.

The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read.  Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).

Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.

Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
 2019-11-18 11:01:23 -06:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description 
... to "StringCarM0Ex"
 2019-11-16 16:40:40 -08:00
Hierophect
81223c76bd revert error 2019-11-15 13:04:25 -05:00
Hierophect
2c6781f74d move neopixel_in_use flag to shared-bindings 2019-11-15 12:59:52 -05:00
Hierophect
de5691acf5 Add never_reset and reset to pin common hal, adjust files 2019-11-15 12:47:00 -05:00
KalbeAbbas
8134ceec83
Update pins.c 2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c 2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c 2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f updated 2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11 
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. 
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
 2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator 
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
 2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf Add board configuration for Winterbloom Sol 2019-11-04 23:11:42 -08:00
Scott Shawcroft
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c 
nrf: allocate two I2C on CPB
 2019-11-03 13:15:36 -08:00
Dan Halbert
85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
brentru
2f04c5891f flip it around 2019-10-31 14:11:50 -04:00
brentru
ab3da3071c flip MADCTL BGR bit to reflect RGB colors 2019-10-31 10:11:47 -04:00
ladyada
d2b613134d we should use native rotation, and tweak madctl (not done yet) 2019-10-29 22:53:44 -04:00
ladyada
1e869d1334 switch to 8-bit mode - tested on hardware! 2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f wip 2019-10-28 18:15:02 -04:00
Dan Halbert
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086 
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
 2019-10-28 14:50:01 -04:00
Thea Flowers
4b742f88d9
Fix spelling 2019-10-25 10:50:27 -07:00
Thea Flowers
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors 
Fixes #2086

When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
 2019-10-23 14:34:14 -07:00
ProductDev
4cd5571203 Adds builds for sparkfun_qwiic_micro with and without flash 2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Kamil Tomaszewski
96756b3945 Add functions to get top and limit stack 2019-10-18 11:04:45 +02:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX 2019-10-17 18:02:05 +11:00
Scott Shawcroft
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master 
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
 2019-10-15 09:46:39 -07:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder 2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs 2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions 2019-10-14 11:55:22 -07:00
Dan Halbert
c1ab2486f9 return chip vcc value 2019-10-12 15:42:15 -04:00
Chris Osterwood
137a4f8a5d Added new flash SKU for production hardware 2019-10-07 14:50:39 -04:00
Kamil Tomaszewski
7aefcc449a Add an alternative way to number the USB endpoints 
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
 2019-10-07 12:31:42 +02:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production 
Robo HAT MM1 - Fixes after testing
 2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a serpente: Update PID and enable as many modules as we can fit 2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb fix spi 2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3 fixed SPI on M4 2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0 updated robohatmm1_m0 2019-09-26 20:02:09 +10:00
wallarug
39265fccf3 included a version number 2019-09-26 19:22:51 +10:00
wallarug
db9495b04b updated board name 2019-09-26 19:21:53 +10:00
wallarug
08b0f80879 updated board name 2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0 remove frozen busio library 2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682 updated pins.c 2019-09-26 19:18:50 +10:00
wallarug
70860e1352 robohatmm1 removed uart and put in correct order 2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b Added TFT pins to HalloWing M4 for code compatibility 2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
b7598f7058 Merge branch 'master' of https://github.com/adafruit/circuitpython 2019-09-19 14:20:28 -07:00
Scott Shawcroft
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51 2019-09-19 12:21:54 -07:00
Melissa LeBlanc-Williams
341428b4da Added SPEAKER pin to HalloWing M4 for code compatibility 2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9 Added TOUCH pins to HalloWing M4 for code compatibility 2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support 2019-09-17 10:40:07 -07:00
jepler
dffedd7c86 samd: peripherals: update submodule reference 2019-09-16 21:48:31 -05:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master 
Add support for Serpente boards
 2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language 2019-09-16 11:51:46 +02:00
jepler
61698eb5d8 AnalogOut / AudioOut: Copy settings from Arduino 
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.

Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).

A fresh clock (6) is allocated for the new 12MHz clock.  This matches
the Arduino value, though not the GCLK index.

Modify other settings to more closely resemble Arduino.

In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.

This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic

Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
 2019-09-15 11:30:49 -05:00
Kattni Rembor
c94310411b Update board def, enable touchio 2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e Add support for Serpente boards 2019-09-14 16:06:28 +02:00
Dan Halbert
b8200d7295 fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use 2019-09-09 23:17:52 -04:00
Scott Shawcroft
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking 
Samd dma tracking
 2019-09-05 11:27:59 -07:00