e136cbd007
forgot to commit port.c
2021-10-10 12:16:15 -07:00
dcb5fd280a
alarm.wake_alarm works for pin and time. Pin & time can both be set at once
2021-10-10 12:01:04 -07:00
238b07c3af
Fixed merge conflict for circuitpython.pot
2021-10-09 14:28:20 -07:00
112739e247
minor tweaks
2021-10-09 14:50:55 -06:00
d66d7d476c
Update ports/atmel-samd/mpconfigport.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-10-09 12:33:05 -06:00
8486502e65
reworked fake sleep. functional for pin and time
2021-10-09 11:44:10 -06:00
4c45364dca
Merge pull request #5442 from jpconstantineau/board-xiao-kb
...
Add new board variant: Seeed XIAO targeted for Keyboards/HID Devices
2021-10-08 18:19:58 -04:00
37d3adfe4f
updated PID from Seeed provided VID/PID
2021-10-08 07:15:18 -06:00
a46aa48e23
Convert more modules to use MP_REGISTER_MODULE
...
Convert espidf, os, rp2pio, samd and time to use MP_REGISTER_MODULE.
Related to #5183 .
2021-10-05 16:58:24 +05:30
881724b529
[ #4701 ] Correct DAC clock speed comments for SAMD21 and SAMD51
2021-10-04 22:18:26 -06:00
6811c5e881
c formatting...
2021-10-04 15:44:46 -06:00
0dd276ba79
c formatting
2021-10-04 15:04:55 -06:00
2ff038f08b
fixing c formatting
2021-10-04 14:55:44 -06:00
e636db713f
Lose dependency to USB via CIRCUITPY_USB define for atmel port.
2021-10-04 10:57:39 +02:00
6a8b4f5f07
fixed c formating
2021-10-03 23:13:58 -06:00
5ceb72009e
fixed c formating for pre-commit check
2021-10-03 22:42:04 -06:00
b95325e3c7
Merge branch 'samd-sleep' into samd-sleep-v1
2021-10-03 17:16:27 -06:00
f748d66128
Setup outline for SAMD alarm module
2021-10-03 14:57:44 -07:00
7a703aaa64
adding comments
2021-10-02 15:00:18 -06:00
79cd10ac85
cleaning up TimeAlarm and PinAlarm
2021-10-01 17:36:04 -06:00
d536be7228
working samd deep sleep timealarm and pinalarm (sketchy)
2021-09-29 11:44:15 -06:00
c5672066d0
initial xiao kb config
2021-09-20 15:52:28 -06:00
4eda8b04c4
removing redudant pycubed v04 board defs
2021-09-16 12:12:15 -06:00
1ccaeeb619
adding back heritage pycubed board defs
2021-09-15 14:36:27 -06:00
4f10a91f85
moving boot counter to main() and re-adding old pin names for SD_CS
2021-09-15 14:33:54 -06:00
5b69aa0a58
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-15 14:23:56 -06:00
0ab4df6f2f
shrink some SAMD21 builds, and nrf simmel
2021-09-14 17:10:49 -04:00
81e28308c2
Revert "turn off inline-unit-growth and max-inline-insns-auto uses"
...
This reverts commit 94d76e0f48
2021-09-14 16:56:04 -04:00
94d76e0f48
turn off inline-unit-growth and max-inline-insns-auto uses
2021-09-14 12:15:21 -04:00
dbd557dc89
splitting pycubed board def into pycubed_v04 and pycubed_v05
2021-09-11 20:29:40 -06:00
d9ae2c00b4
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-11 20:09:59 -06:00
aa1d089cdb
proxlight: Freeze adafruit_adps9960 instead of adafruit_hid; enable usb_midi
2021-09-10 14:50:09 -04:00
fa83c1c2f9
adding boot counter to main.c
...
The boot counter is a uint8_t single-byte counter stored in the first NVM byte position (`micrcontroller.nvm[0]`). The counter increments by 1 each time the board boots, regardless if it's a hard or soft reset.
Enable the boot counter by adding `#define CIRCUITPY_BOOT_COUNTER 1` to your board's mpconfigboard.h file. Note that an error will be thrown during the build if `CIRCUITPY_INTERNAL_NVM_SIZE` is not also set within mpconfigboard.h.
2021-09-08 19:56:23 -06:00
674a3027fc
updating pycubed firmware for mainboardv05 :)
2021-09-04 18:39:24 -06:00
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
d526925d49
make aesio module full build dependent
2021-09-02 19:02:01 +05:30
0d280fa83c
Two fixes, one for ble workflow, one for linking
...
BLE workflow had an incorrect list size for characteristics
Linking didn't advance . link it should have without extra ().
2021-09-01 12:43:43 -07:00
cd5acae4f4
Sort .text section to reduce fill
2021-08-31 18:04:01 -07:00
771b4c7464
Add two space saving knobs
...
* Reduce the number of supported HID reports of IDs per descriptor.
This saves ~200 bytes in the default HID objects.
* (Not enabled) Compute QSTR attrs on init. This trades 1k RAM for
flash. Flash is the default (1).
2021-08-31 13:02:34 -07:00
838d30b3a4
Fix incorrect macros
2021-08-30 14:40:14 -07:00
8f024316ad
explicitly disable paralleldisplay on a few boards
2021-08-29 07:33:54 -05:00
7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
6d49a9f0c5
Merge pull request #5205 from jepler/deprecate-vertical-scroll
...
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 12:52:12 -07:00
935888927e
Merge pull request #5196 from dhalbert/samd-audio-fixes
...
improve SAMD audio DMA
2021-08-23 10:27:59 -07:00
379461df7d
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 09:17:59 -05:00
57841dc92b
Merge pull request #5171 from tannewt/unicode_filenames
...
Turn on unicode for FATFS
2021-08-21 16:31:54 -04:00
046372d840
put back some dynossat_edu_obc pins
2021-08-21 16:14:09 -04:00
b8b23c97d9
improve SAMD audio DMA
2021-08-21 14:34:37 -04:00
208ec71372
Merge pull request #5190 from jepler/issue4883
...
samd: diagnose out of range I2C frequency
2021-08-21 08:00:50 +05:30
f6d1caabc9
Merge pull request #5182 from tannewt/fix_imx
...
Check background pending before sleep
2021-08-21 08:00:10 +05:30
26d33658ea
samd: diagnose out of range I2C frequency
...
The frequency divisor is limited to 255, which gives 48MHz/2/255 ~= 94.1kHz as
the lowest speed.
Without this change, values below this cut-off gave higher frequencies instead,
which didn't appear to have any relation to the frequency value requested.
Closes : #4883
2021-08-20 15:22:35 -05:00
9f051ec7bf
Fix usb calibrated SAMD21 builds
2021-08-20 12:45:59 -07:00
5c6e80a2bb
Shrink builds by defining advanced micropython API
...
Also, ignore more pins on SAMD boards and disable EXFAT on others.
2021-08-19 16:49:33 -07:00
d2860b58b0
Check background pending before sleep
...
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.
Fixes #5086 and maybe others.
2021-08-19 12:18:13 -07:00
cabe96e188
canio: Run background tasks while waiting for message reception
...
Closes : #5004
2021-08-18 11:39:40 -05:00
e0ce5ff045
Fix some builds by disabling exfat
2021-08-18 08:22:29 -07:00
5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes
...
Support multiple reports per device in usb_hid
2021-08-17 17:14:28 -04:00
a77e269121
cp_sapling_m0_revb: board.UART not board.uart
...
This is the only board that didn't match the all-uppercase convention for these UART (and more generally, these bus) entries.
2021-08-16 17:07:17 -05:00
f37e1d7bf5
squeeze a couple of boards
2021-08-14 17:36:05 -04:00
3ffab36cdc
Merge remote-tracking branch 'adafruit/main' into fix_samd_timer_leak
2021-08-13 15:20:25 -07:00
de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
fb6b438580
Make `getpass` and `traceback` full build only
...
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.
Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote
2021-08-11 13:43:59 -07:00
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
...
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
2021-08-11 12:19:16 -07:00
7f016ae11e
Fix build with filter to do OR
2021-08-11 12:10:51 -07:00
083960ce90
Fix SAMD51 builds and Prox Trinkey
...
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
ebf0901558
Merge pull request #5079 from dhalbert/debug-audio
...
Fix various RP2040 and SAMD audio issues
2021-08-11 11:19:53 -07:00
b56455ffbb
Allow sleep while paused
2021-08-11 10:48:39 -07:00
67c6932ca2
Reset timers separate from pwmio
...
This prevents timer leakage on builds without pwmio.
Fixes #5057
2021-08-11 09:58:31 -07:00
f0859ac954
Switch SAMD21 ticks to PER event
...
The EVSYS is used to generate an interrupt from the event. This
simplifies timing used in pulseio that conflicted with the
auto-reload countdown.
Fixes #3890
2021-08-10 15:23:45 -07:00
e741330ca8
Consistent pin naming for SparkFun MicroMod processor boards.
2021-08-09 23:10:52 -07:00
93c9d59960
Merge branch 'main' into getpass
2021-08-10 01:00:10 +05:30
2451c788f4
valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad
2021-08-09 09:47:13 -04:00
59b89fdc5c
Fix various audio DMA issues:
...
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`
RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
2021-08-09 09:47:13 -04:00
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
51f8603783
add getpass module
2021-08-09 17:50:28 +05:30
579194a543
Colocated board.LED and D13 together (GCM4)
2021-08-09 05:35:38 +02:00
a15ac65fa0
Add board.LED for Grand Central M4 Express
...
Fixes #5111
2021-08-08 21:43:12 +02:00
063e3946d6
Merge pull request #5094 from jepler/quirc
...
Add qrio: Decode QR codes with quirc lib
2021-08-07 09:30:20 +05:30
be2342f32f
Merge pull request #5072 from microDev1/traceback
...
Add traceback module
2021-08-06 12:10:17 -07:00
821f3d5532
board bdmicro_vina_d51: Add support for MX25L12833F flash chip. Add QSPI activity indicator LED. Add D15-D19 as aliases for the I2S peripheral pins.
2021-08-05 09:14:51 -04:00
ac4b10bcd9
It's "shared-module", not "shared-modules"
2021-08-03 10:37:47 -05:00
d5cdceb9b9
Use all 4 status pixels on neotrinkey too
2021-07-28 14:25:21 -07:00
e9369d50e1
Merge pull request #5067 from tannewt/pulseout_switch
...
Switch to pin, frequency and duty_cycle PulseOut
2021-07-28 14:58:06 -04:00
f371c0a609
add traceback module
2021-07-28 18:06:23 +05:30
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad
...
remove gamepad; deprecate gamepadshift
2021-07-27 11:35:06 -04:00
901a6c27c0
remove gamepad; deprecate gamepadshift
2021-07-26 22:15:09 -04:00
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch
2021-07-26 18:48:59 -07:00
412eb87080
Switch to pin, frequency and duty_cycle PulseOut
...
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0
This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.
Most of the way for #3264
Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
11ca505fdb
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
f3a286a7ea
can we add busdevice and have room?
2021-07-25 14:45:35 -04:00
70cbb4eddb
Support multiple status neopixels
...
Use the 10 neopixels on the playgrounds for status.
Fixes #5039
2021-07-23 15:17:09 -07:00
f84cb94819
Remove OSError(0) and old network modules
...
The newer modules are `socketpool` and `ssl`.
Fixes #3924 , related to #2021 , closes #1880 , closes #2273 , closes #2274
2021-07-21 17:33:40 -07:00
fece0fb432
Fix crash when UART construct fails
...
After the script stops with the exception thrown the final gc_sweep
will call any finalizers and they usually call deinit. deinit on
invalid objects can wreak havoc by changing random memory or
(hopefully) crashing. This fixes ensures the object is deinited
until initialization succeeds and the object is valid.
Do the same fix for I2C and SPI too.
Fixes #4700 and fixes #5005
2021-07-20 17:15:19 -07:00
e042d54702
Fix three boards and xtensa cache key
2021-07-16 11:15:05 -07:00
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
35030fbb30
added pin object to analogout
2021-07-12 20:33:42 -04:00
0e88b77b3e
Merge pull request #4977 from pewpew-game/samd21-filesystem-size
...
Allow changing size of the filesystem on samd21 per board
2021-07-09 11:00:13 -07:00
Max Holliday
Dan Halbert
Pierre Constantineau
microDev
Josh Gadeken
EmergReanimator
Lucian Copeland
Dan Halbert
Neradoc
Scott Shawcroft
Jeff Epler
Scott Shawcroft
Ryan A. Pavlik
Chris Wilson
Nathan Young
Brian Dean
Kattni
lady ada
BoB LeSuer