Scott Shawcroft
1b00d94b23
Fix second shared PWM
...
Fixes #4210
2021-02-25 14:49:09 -08:00
Scott Shawcroft
80f7972f72
Update RP2040 Feather pinout for production rev
2021-02-25 14:46:08 -08:00
Jeff Epler
22276710e6
rp2pio: Fix writing where the stride was 2 or 4
...
The wrong stride value was being checked.
2021-02-25 15:50:49 -06:00
Kevin Matocha
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
Dan Halbert
94d7bfb1c9
Merge pull request #4264 from UnexpectedCircuitPython/main
...
Expanded pin names for TinyS2 + FeatherS2 pin additions for DAC1 & DAC2
2021-02-25 15:13:18 -05:00
Dan Halbert
199a8ce8b0
change DigitalInOut direction only when necessary; strong drive strength
2021-02-25 14:10:19 -05:00
root
f8eb5bc275
Cleanup PIOs and State Machines on soft reset
2021-02-25 12:38:43 -06:00
microDev
8170e26a86
more uart improvements
...
- address suggested changes
- refine uart instance availibility checks
- improve pin validation and rx buffer handling
2021-02-25 23:46:00 +05:30
Dan Halbert
bbe0602738
Merge pull request #4245 from kamtom480/spresense_usb_speed
...
spresense: Pass the correct USB bus speed after restart
2021-02-25 11:02:33 -05:00
Kamil Tomaszewski
fb32e0a7fd
qtpy_m0_haxpress: Change config to make it fit.
2021-02-25 09:44:33 +01:00
Seon Rozenblum
69b10d7925
Added DAC1 & DAC2 pin names for FeatherS2
...
Expanded pin names for TinyS2 and added some new ones for functionality I forgot to add pin names for
Cleaned up mpconfigboard
2021-02-25 17:32:34 +11:00
root
86e60f5f35
Clean up formatting
2021-02-24 17:26:35 -06:00
root
17ff5dcc99
Return NotImplementedError for PulseOut
2021-02-24 17:04:05 -06:00
root
8e15f36baa
pulseio (pulsein) for RP2040
2021-02-24 16:58:29 -06:00
microDev
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
Kamil Tomaszewski
e369473794
spresense: change RX and TX buffer size for CDC
2021-02-24 18:19:18 +01:00
Mark
b935dcafdc
Merge branch 'main' into rp2040_countio
2021-02-23 19:46:41 -06:00
gamblor21
379f454ce6
Adding countio to rp2040
2021-02-23 19:38:05 -06:00
Scott Shawcroft
abbbb91fa8
Add state machine divisor check
...
This causes an exception when setting a state machine too slow or
too fast.
Fixes #4222
2021-02-23 16:30:46 -08:00
Scott Shawcroft
360475e266
Implement audiobusio and enhance PIO for it
...
This adds I2SOut and PDMIn support via PIO.
StateMachines can now:
* read and read while writing
* transfer in 1, 2 or 4 byte increments
* init pins based on expected defaults automatically
* be stopped and restarted
* rxfifo can be cleared and rxstalls detected (good for tracking when
the reading code isn't keeping up)
Fixes #4162
2021-02-23 15:50:00 -08:00
Scott Shawcroft
e41137c745
Merge pull request #4244 from UnexpectedCircuitPython/main
...
Added Unexpected Maker TinyS2 board definition
2021-02-23 10:40:06 -08:00
Scott Shawcroft
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards
...
Added definitions for Pimoroni RP2040-based boards
2021-02-23 10:00:19 -08:00
ZodiusInfuser
1a0bf4c33f
Added flash size for PicoSystem
2021-02-23 11:04:20 +00:00
ZodiusInfuser
a9951c9b6c
Added flash size for Keybow2040
2021-02-23 11:01:40 +00:00
ZodiusInfuser
ca9b7debe0
Added flash size for Tiny2040
2021-02-23 10:43:35 +00:00
Seon Rozenblum
78b2daa2a7
Added Unexpected Maker TinyS2 board definition
2021-02-23 17:55:17 +11:00
Dan Halbert
a30d4ad25d
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-22 23:03:11 -05:00
Scott Shawcroft
3fdf29e773
More parens
2021-02-22 18:35:09 -08:00
Scott Shawcroft
863981a5b8
Parens
2021-02-22 18:31:45 -08:00
Scott Shawcroft
0aafeac209
Board specific flash sizes for RP2040
...
Stop-gap solution for #4041 . Comment is there to provide info
needed in the future. (We currently run the generic "safe" settings.)
2021-02-22 17:19:18 -08:00
Dan Halbert
8470f0fdb7
SAMD21: one endpoint pair for MSC now instead of two
2021-02-21 12:37:59 -05:00
Dan Halbert
cf3217e6d4
Merge pull request #4232 from TG-Techie/fix_tg_watch
...
fix TG-Watch ble issue
2021-02-20 18:10:52 -05:00
Jonah Yolles-Murphy
a9a2145238
fix TG-Watch ble issue
2021-02-20 15:46:33 -05:00
ZodiusInfuser
52f2fd6d53
Removed trailing white space
2021-02-20 17:25:26 +00:00
ZodiusInfuser
417173b752
Removed trailing white space
2021-02-20 17:24:26 +00:00
ZodiusInfuser
9a4b8c5ed9
Removed trailing white space
2021-02-20 17:23:23 +00:00
ZodiusInfuser
dea498a51f
Added new line
2021-02-20 17:20:28 +00:00
ZodiusInfuser
9fbeb0baea
Added new line
2021-02-20 17:20:06 +00:00
ZodiusInfuser
03577ec81c
Added new line
2021-02-20 17:19:45 +00:00
ZodiusInfuser
dac81ea545
Added new line
2021-02-20 17:19:31 +00:00
ZodiusInfuser
0a00f91979
Added new line
2021-02-20 17:15:42 +00:00
ZodiusInfuser
f1df07002f
Added new line
2021-02-20 17:15:20 +00:00
ZodiusInfuser
27bc5492f5
Added other files for PicoSystem
2021-02-20 13:37:08 +00:00
ZodiusInfuser
e9c7af1dee
Added board.c for PicoSystem
2021-02-20 13:36:46 +00:00
ZodiusInfuser
fb7cce6503
Added other files for Keybow2040
2021-02-20 13:35:27 +00:00
ZodiusInfuser
7ac20bfb8b
Added board.c for Keybow2040
2021-02-20 13:35:06 +00:00
ZodiusInfuser
66dd74cd12
Added other files for Tiny2040
2021-02-20 13:33:54 +00:00
ZodiusInfuser
ad8916499d
Added board.c for Tiny2040
2021-02-20 13:32:54 +00:00
Dan Halbert
985e020936
shrink simmel build
2021-02-19 18:41:27 -05:00
Dan Halbert
67406488d1
merge from upstream; re-alphabetize
2021-02-19 14:22:50 -05:00
ZodiusInfuser
ee5a48fece
Delete pimoroni_tiny2040
2021-02-19 18:30:29 +00:00
ZodiusInfuser
db102ab1ad
Create pimoroni_tiny2040
2021-02-19 18:29:57 +00:00
microDev
b12ccefbe6
uart implementation for rp2040
2021-02-19 18:36:00 +05:30
Jeff Epler
1cd4e4552e
Merge pull request #4219 from jepler/bit_transpose
...
Add Bit transpose function to support piopixl8
2021-02-18 20:29:05 -06:00
Jeff Epler
7fd4567893
bitops: rename from _bit_transpose, describe the algorithm
2021-02-18 15:41:23 -06:00
Lucian Copeland
0ecb24c3e5
Merge pull request #4169 from hierophect/stm32-i2cstart
...
STM32: Fix I2C repeated start by converting to IT mode
2021-02-18 15:19:00 -05:00
Dan Halbert
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
Dan Halbert
53a002a096
Initial fix, but bitbangio timing may be off
2021-02-18 13:14:51 -05:00
Jeff Epler
9cf7d73c6c
core: add bit_transpose function
...
.. this version can only handle exactly 8 bits "across". The restriction
may be relaxed in a future revision.
2021-02-18 11:32:47 -06:00
Dan Halbert
5c37b73c6d
fix typo to fix nrf builds
2021-02-18 11:09:32 -05:00
microDev
696d212dc7
fix nvm rewrite
2021-02-18 18:42:00 +05:30
Jeff Epler
ab5eb86118
raspberrypi: implement os.urandom
...
Since the datasheet cast some doubt on the strength of the "rosc_hw->randombit",
I use the SHA256 hash function to create a high quality random seed
from random values of uncertain entropy, as well as to generate a sequence
of random values from that seed using SHA256 as a cryptographically-secure
random number generator.
In practice, it produces over 100kB/s of random data which does not
have any gross problems according to _PractRand_.
2021-02-17 17:49:25 -06:00
Scott Shawcroft
261b077209
Merge pull request #4192 from dhalbert/pico-pwmout-top-fix-4189
...
RP2040: fix off-by-one PWM top issue
2021-02-16 17:38:09 -08:00
Dan Halbert
c26de0136a
works! no timeouts
2021-02-16 17:39:36 -05:00
Dan Halbert
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
Dan Halbert
93d788543c
Merge remote-tracking branch 'adafruit/main' into secondary-cdc
2021-02-15 20:03:53 -05:00
Lucian Copeland
6d5ffc677b
is_free should not check never_reset
2021-02-15 10:29:05 -05:00
Dan Halbert
0ec99b37e0
handle 100% duty cycle; improve actual_frequency calc
2021-02-13 13:16:49 -05:00
Dan Halbert
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
Dan Halbert
3e4328140c
fix off-by-one PWM top issue
2021-02-12 15:53:31 -05:00
Jeff Epler
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
microDev
f2d7a5f1e1
Merge branch 'main' into nvm-rp
2021-02-12 18:36:54 +05:30
microDev
527b11f99e
implement suggested changes
...
- update FLASH_FIRMWARE length
- use linker script define value
2021-02-12 18:28:48 +05:30
Dan Halbert
08f30fedf5
Merge pull request #4188 from ladyada/main
...
QT Py with RP2040
2021-02-11 22:19:56 -05:00
lady ada
6c914b8722
QT Py with RP2040
2021-02-11 19:21:42 -05:00
Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
Lucian Copeland
edb7f2d807
Free up space for JA build
2021-02-11 16:30:27 -05:00
Lucian Copeland
a061768ceb
Merge remote-tracking branch 'upstream/main' into stm32-i2cstart
2021-02-11 16:19:12 -05:00
Scott Shawcroft
aae10fb37f
Merge pull request #4167 from tannewt/rp2040_audiopwmio
...
Add PWM based audio playback
2021-02-11 12:19:57 -08:00
microDev
205837c47b
nvm implementation for rp2040
2021-02-11 12:48:36 +05:30
Lucian Copeland
d00bee2149
Fix I2C Repeated start error by converting to IT mode
2021-02-10 14:59:19 -05:00
Scott Shawcroft
f6603aa566
Merge pull request #4168 from BHDynamics/main
...
Add DynaLoRa-USB Dongle
2021-02-10 11:03:16 -08:00
Enrique Casado
983c75fb24
Add more pin names
2021-02-10 12:19:50 +01:00
Scott Shawcroft
191b143e7b
Add PWM based audio playback
...
See
https://learn.adafruit.com/circuitpython-essentials/circuitpython-audio-out
to get started.
Fixes #4037
2021-02-09 15:38:33 -08:00
Scott Shawcroft
b19c700d4a
Merge pull request #4165 from DavePutz/issue_4143
...
Issue 4143 - Fixed marking a PWM slice incorrectly as variable frequency
2021-02-09 14:30:39 -08:00
root
9a28f0bf45
Fix check for variable PWM frequency
2021-02-09 15:22:59 -06:00
Dan Halbert
5ba28e9861
Merge pull request #4159 from dhalbert/disable-brownout-before-deep-sleep-4025
...
turn off brownout before deep sleep
2021-02-09 09:03:33 -05:00
Scott Shawcroft
6efd87b3c6
Merge pull request #4124 from m4tk/main
...
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-08 16:35:27 -08:00
Scott Shawcroft
0ceac79dfb
Merge pull request #4048 from janderit/fix_3763_mimxrt10xx_spi
...
fixes: busio, SPI OS error 5 for mimxrt10xx
2021-02-08 16:29:48 -08:00
Dan Halbert
3c99b09993
Merge pull request #4160 from gamblor21/rp2040_neopixel_pin_fix
...
RP2040 Set the neopixel pin as output after PIO use
2021-02-08 17:57:30 -05:00
Dan Halbert
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
Dan Halbert
b0ed258302
Merge pull request #4155 from jepler/rpi-pio-background
...
rp2pio: Transfer up to 32 bytes before checking background tasks
2021-02-08 16:34:16 -05:00
Dan Halbert
f171660870
Merge pull request #4139 from hierophect/socket-accept-conn
...
Socket: Connect accepted sockets
2021-02-08 16:25:31 -05:00
Dan Halbert
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
Dan Halbert
c8cf1258ac
Merge pull request #4154 from LuminousOwl/fix-max-pio-instructions
...
Fix maximum PIO instructions
2021-02-08 16:21:49 -05:00
gamblor21
386b49c3e1
Set the pin as output after PIO use
2021-02-08 15:13:37 -06:00
Dan Halbert
c3a1bd8f13
turn off brownout before deep sleep
2021-02-08 12:40:20 -05:00
Lucian Copeland
1043d619fd
Merge pull request #4148 from Neradoc/fix-recv_into
...
Fix socket.recv_into receiving one less byte than expected
2021-02-08 11:29:41 -05:00
Dan Halbert
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
Jeff Epler
5423e4966c
rp2pio: Transfer up to 32 bytes before checking background tasks
...
@Jerryneedell noticed that this problem affected strips short enough
to not use the DMA peripheral, thanks for the hot tip!
Instead of checking for background tasks after every byte transfer,
try up to 32 transfers before attending to background tasks.
This fixes the problem I was seeing on my 5-pixel circuit.
Closes #4135 .
2021-02-08 08:35:07 -06:00
Philip Jander
5bf08c503b
adds: maximum retries on SPI busy
2021-02-07 17:06:46 +01:00
Philip Jander
ae91b12aea
chore: whitespace fixed
2021-02-07 16:59:11 +01:00
Philip Jander
127cc6204a
adds: idle loop to wait for SPI not busy (mimxrt10xx)
2021-02-07 16:59:11 +01:00
Neradoc
6be2466d6f
ESP32S2: Socket.recv_into only took len-1 bytes
2021-02-07 08:57:19 +01:00
Jason Nichols
ae262cde55
Fix maximum PIO instructions
2021-02-06 10:54:25 -05:00
Scott Shawcroft
22dc7d5359
Update to the very latest SDK w/GP15 restore
...
Also adds unique id support
Fixes #4039 and hopefully #4107
2021-02-05 18:44:06 -08:00
Lucian Copeland
582bc59d39
Connect accepted sockets
2021-02-05 17:32:15 -05:00
Scott Shawcroft
c6a7b00030
Merge pull request #4137 from ferret-guy/smps-mode-pin-rpi-pico
...
Add SMPS mode pin to Raspi Pico pins.c
2021-02-05 12:12:55 -08:00
Scott Shawcroft
e7438c481e
Merge pull request #4125 from xorbit/main
...
Add A3 pin to Raspberry Pi Pico
2021-02-05 12:08:35 -08:00
Scott Shawcroft
a310d4336b
Merge pull request #4128 from hierophect/esp32s2-i2s-claimpin
...
ESP32S2: Add I2S pin claiming
2021-02-05 11:47:49 -08:00
Lucian Copeland
8214d67e5f
Fix LWIP connect error report
2021-02-05 13:14:49 -05:00
Mark Omo
1292c35d59
Add SMPS mode pin to Raspi Pico pins.c
...
Add SMPS mode pin to Raspi Pico pins.c; see section "4.3. Using the ADC" of the Pico datasheet for discussion.
Driving this pin high forces the onboard regulator into a lower noise PWM mode.
2021-02-05 11:09:40 -07:00
Patrick Van Oosterwijck
a158dde628
Add alternate name VOLTAGE_MONITOR for A3
2021-02-05 10:55:03 -07:00
Lucian Copeland
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
Dan Halbert
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
Dan Halbert
0a55cfbde8
Merge pull request #4126 from FiriaCTO/webusb
...
WebUSB serial support (compile-time option, currently defaulted to OFF)
2021-02-05 09:11:43 -05:00
Enrique Casado
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
m4tk
54bd79a51a
LCD_MISO is not connected on board
2021-02-05 07:52:01 +01:00
Dan Halbert
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
Dan Halbert
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
Lucian Copeland
210d0f8798
Add I2S pin claiming
2021-02-04 16:30:05 -05:00
Jeff Epler
6e153d9948
raspberrypi: implement reset, reset_to_bootloader
...
This makes all the following work:
* normal microcontroller.reset()
* reset into safe mode or UF2 bootloader via microcontroller.on_next_reset()
* reset into UF2 bootloader via the "1200 baud trick"
The implementation of reset_cpu is from micropython.
2021-02-04 12:07:50 -06:00
Patrick Van Oosterwijck
d357a05870
Add A3 pin to Raspberry Pi Pico
...
We want to be able to use this to measure VSYS.
2021-02-04 10:44:37 -07:00
m4tk
ff7b296b04
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-04 16:46:15 +01:00
Kevin Banks
215a56c920
Merge branch 'main' into webusb (trying to get CI back online)
2021-02-03 16:48:28 -06:00
BiffoBear
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Scott Shawcroft
9140bfb5b2
Merge pull request #4049 from hierophect/sslsocket
...
Separate SSLSocket from Socket
2021-02-02 10:35:07 -08:00
Scott Shawcroft
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp
...
RP2040: Support for RTC
2021-02-01 19:47:44 -08:00
Scott Shawcroft
ced3dc70ff
Merge pull request #4018 from iot49/cp-flow
...
add uart hardware flow control to nrf port
2021-02-01 19:38:16 -08:00
Kevin Banks
e79283932d
Moving control of USB compile-time options down to the BOARD level
2021-02-01 19:08:56 -06:00
Kevin Banks
e1618c21b2
Default WebUSB to OFF because other ports are not ready for it yet
2021-02-01 17:56:38 -06:00
microDev
ec03267035
rtc implementation for rp2040
2021-02-02 00:00:00 +05:30
Dan Halbert
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc
...
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
2021-02-01 12:50:37 -05:00
Dan Halbert
745ba01768
shrink simmel
2021-02-01 12:22:35 -05:00
Lucian Copeland
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
Lucian Copeland
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
Scott Shawcroft
0c0b517112
Merge pull request #4105 from xorbit/main
...
Add board Silicognition LLC M4-Shim
2021-01-31 20:02:36 -08:00
Scott Shawcroft
529114c162
Merge pull request #4077 from netroy/lilygo-ttgo-t8-esp32-s2
...
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 19:50:36 -08:00
Scott Shawcroft
17cf03c8e4
Merge pull request #4083 from microDev1/watchdog-rp
...
RP2040: Support for WatchDog
2021-01-31 19:45:38 -08:00
Scott Shawcroft
a52395a4bb
Merge pull request #4095 from hierophect/socket-timeout
...
Fix default socket timeout
2021-01-31 19:17:12 -08:00
Aditya
6dba7a146d
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 14:30:31 +01:00
Patrick Van Oosterwijck
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
Lucian Copeland
ddd516a683
Fix default timeout
2021-01-30 15:44:44 -05:00
microDev
34fe152fcf
extend include path
2021-01-30 14:00:14 +05:30
James Bowman
acbf66dacc
Make sys.platform "RP2040" on raspberrypi
...
[#4091 ]
2021-01-29 12:33:37 -08:00
James Bowman
067f42b4f8
Add Gameduino 3X Dazzler support on raspberry_pi_pico
...
Tested with hardware. Looks good.
Follow on from #4054
2021-01-29 12:25:59 -08:00
Lucian Copeland
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
Kevin Banks
63f9b12fe6
Partially hard-coded VENDOR descriptor has been added. First build to be accessed via WebUSB. NOTE - had to disable HID (EndPoint shortage?)
2021-01-28 20:22:31 -06:00
root
67f128c0cf
Fixing microcontroller.cpu on muti-core cpus and adding microcontroller.cpus
2021-01-28 14:42:39 -06:00
microDev
a54b57ea40
watchdog implementation for rp2040
2021-01-28 15:15:15 +05:30
Bernhard Boser
e285b5b98c
Merge remote-tracking branch 'adafruit/main' into cp-flow
2021-01-27 09:22:41 -08:00
Bernhard Boser
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
Scott Shawcroft
351a0e747d
Merge pull request #4047 from kmatch98/esp32s2_ParallelBus
...
Add initial ParallelBus support for ESP32-S2
2021-01-26 13:07:58 -08:00
Dan Halbert
29e672fe86
Merge pull request #4071 from tannewt/rp2040_uart_error
...
Raise an error on UART use
2021-01-26 15:22:02 -05:00
Lucian Copeland
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
Dan Halbert
a9227e15d0
Merge pull request #4063 from dhalbert/rp2040-gp15
2021-01-26 13:38:41 -05:00
Dan Halbert
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
Scott Shawcroft
b42e94ee2c
Raise an error on UART use
2021-01-26 08:48:30 -08:00
Dan Halbert
f154ee855d
shrink simmel
2021-01-26 10:23:37 -05:00
Dan Halbert
be4cfdd3d6
Use TOTAL_GPIO_COUNT instead of magic number 30
2021-01-25 22:16:24 -05:00
Kevin Banks
fbfb7b68cc
Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors.
2021-01-25 20:37:58 -06:00
Kevin Matocha
61850acd14
Fixed bug in pin error handling, deleted debug prints
2021-01-25 16:51:12 -06:00
Scott Shawcroft
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
Scott Shawcroft
c075e89258
Merge pull request #4054 from dglaude/patch-1
...
Permit Gameduino 3X Dazzler support on Metro M4 AirLift Lite.
2021-01-25 14:33:00 -08:00
Kevin Matocha
4140012430
Allow pins >= 32, allow write pin on different register than data pins
2021-01-25 16:25:56 -06:00
Lucian Copeland
9f34ec78c4
Separate Socket and SSLSocket, add LWIP connect
2021-01-25 17:07:25 -05:00
Dan Halbert
0fa5aa359d
Stop treating pin 15 specially.
2021-01-25 16:07:01 -05:00
Kamil Tomaszewski
c5992a3101
spresense: update Spresense SDK to 2.0.2
2021-01-25 18:40:14 +01:00
Dan Halbert
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
Dan Halbert
1e97d384ff
add GP15
2021-01-25 11:02:32 -05:00
Dan Halbert
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
David Glaude
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
Kevin Matocha
10965e5989
Delete unnecessary comments
2021-01-23 11:30:17 -06:00
Dan Halbert
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
Kevin Matocha
34aa01c5f9
Remove redundant clear_write, add make translate
2021-01-22 22:29:51 -06:00
Scott Shawcroft
de6b05a17b
Fix DigitalInOut.pull on RP2040
...
It used to always return None.
Fixes #4035
2021-01-22 19:00:37 -08:00
Kevin Matocha
811a34fc3d
Add initial ParallelBus support for ESP32-S2
2021-01-22 14:42:09 -06:00
Dan Halbert
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
Dan Halbert
f50edc2904
Merge pull request #4044 from DavePutz/rp2040_longint
...
RP2040 longint support
2021-01-22 10:30:12 -05:00
Dan Halbert
f72c1474c5
Merge branch 'main' into connect
2021-01-22 03:56:57 -05:00
Dan Halbert
e3275be8b1
Merge pull request #3911 from hugodahl/add-translation-for-builtin-object-help
...
Update built-in help output for localization (Issue #3907 )
2021-01-22 03:49:19 -05:00
Dan Halbert
63b5e56c72
shrink feather_m0_adalogger and gemma_m0
2021-01-21 23:49:49 -05:00
Dan Halbert
e8e8c593ac
move longint choice to mpconfigport.mk
2021-01-21 22:50:15 -05:00
Dan Halbert
ea9fe24971
shrink arduino_mkrzero build
2021-01-21 18:02:35 -05:00
root
f39ca0a1d6
Adding longing support on RP2040
2021-01-21 16:42:16 -06:00
root
3aab17c98e
Adding longint support on RP2040
2021-01-21 16:40:57 -06:00
hierophect
f88a896c03
Merge pull request #3854 from hierophect/esp-tcpserver
...
ESP32S2: Implement TCP Server bindings
2021-01-21 17:25:14 -05:00
Dan Halbert
9b8246f889
shrink sparkfun_samd21_dev de_DE build
2021-01-21 15:56:30 -05:00
anecdata
1f6cd496c7
1. check enabled before scan; 2. make start-station() the single control point for esp_wifi_set_mode()
2021-01-21 13:54:19 -06:00
Scott Shawcroft
b73b30ff9f
Switch to upstream TinyUSB
2021-01-21 11:33:13 -08:00
Scott Shawcroft
b47fd08b20
copy editing
2021-01-21 10:17:40 -08:00
Scott Shawcroft
b0f7fd933f
type fix
2021-01-20 23:33:00 -08:00
Scott Shawcroft
6a6f22b0e6
pre-commit
2021-01-20 23:30:15 -08:00
Scott Shawcroft
48721584f9
Temporarily turn off string op overflow check
2021-01-20 19:16:56 -08:00
Scott Shawcroft
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
Scott Shawcroft
eff68b0d9f
Merge pull request #4011 from dheera/main
...
prevents going into safe mode for watchdog resets
2021-01-20 11:30:12 -08:00
Scott Shawcroft
f1e4960d14
Merge pull request #4019 from mrangen/QSPI-comment-fix
...
Fixed comment in mpconfigboard.h
2021-01-19 18:41:50 -08:00
Dan Halbert
409b5ff009
Merge pull request #4028 from djix123/stm32411ce_blackpill_haxpress
...
Add support for a 'haxpress' external SPI flash build for stm32f411ce Black Pill board
2021-01-19 13:01:56 -05:00
Jonathan Giles
55c6d3e92f
1. Rename 'stm32f411ce_blackpill_haxpress' to 'stm32f411ce_blackpill_with_flash'
...
2. Add 'W25Q64JV_IQ' to flash chip list (as per commercial version)
2021-01-19 11:48:15 -05:00
djix123
b4bdf55eda
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.mk
...
Update PID for _with_flash version to resolve duplicate PID issue
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:35:52 -05:00
djix123
4804032f09
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.mk
...
Change name from _haxpress to _with_flash
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:35:03 -05:00
djix123
c8046af6e7
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.h
...
Change name from _haxpress to _with_flash
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:34:47 -05:00
Jonathan Giles
ebb4df846f
Add support for a 'haxpress' external SPI flash build for the stm32f411ce blackpill board
2021-01-19 07:46:59 -05:00
anecdata
a01ff658ea
fix case of connecting when wifi is stopped
2021-01-18 19:57:01 -06:00
Bernhard Boser
e27dd26dc7
make translate, BEWARE adds the 'world'
2021-01-18 11:26:39 -08:00
Dan Halbert
ee48e4b452
ESP32-S2: Initialize touch in proper order
2021-01-18 11:52:03 -05:00
mrangen
dea2bcd8f0
Fixed comment in mpconfigboard.h
2021-01-17 21:20:27 -07:00
Bernhard Boser
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
anecdata
c524900a1b
check connected before connecting
2021-01-17 20:21:31 -06:00
jerryneedell
a9389343a8
Revert "UMFEATHERS2 - implement use of DotStar for status led"
2021-01-17 05:15:19 -05:00
gamblor21
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
dheera
d43eb7e84b
prevents going into safe mode for watchdog resets
2021-01-16 17:38:08 -08:00
gamblor21
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
Scott Shawcroft
816cbe4704
Merge pull request #3992 from anecdata/reason4
...
wifi: more disconnect reasons for retries & include error code in exception
2021-01-15 11:52:34 -08:00
Lucian Copeland
4bc664fe5f
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-15 12:02:16 -05:00
Dan Halbert
c4f0325ff8
Merge pull request #3991 from TG-Techie/main
...
Revision to TG-Watch
2021-01-14 18:43:52 -05:00
Dan Halbert
8c0a9a2486
Merge pull request #4004 from jepler/fix-parallel-build-main
...
ports/unix: Fix parallel build problem
2021-01-14 18:00:46 -05:00
Scott Shawcroft
e6b49d95ee
Merge pull request #3993 from dhalbert/gattc-write-lengths
...
don't check length for remote characteristic or descriptor
2021-01-14 12:56:29 -08:00
Jeff Epler
059363f0e2
ports/unix: Fix parallel build problem
...
This is the same as I added to mpy-cross at e666e86035#3074
2021-01-14 14:13:31 -06:00
Dan Halbert
aedc8efeda
Add pin A1 as alias for AD1; A1 is preferred
2021-01-14 14:43:47 -05:00
Lucian Copeland
287770f885
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-14 10:21:08 -05:00
anecdata
f75bb5c50f
Rename to match WIFI_REASON. Also return specific reason code.
2021-01-13 23:46:35 -06:00
anecdata
e519dd3c52
Retry on all disconnect reasons other than: 2 exception reasons & 1 manual disconnect reason.
2021-01-13 23:45:59 -06:00
Jonah Yolles-Murphy
c63d5a44a0
restore TG-Watch USB_PID from accidental overwrite
2021-01-14 00:08:34 -05:00
Jonah Yolles-Murphy
5f8ad0c5e6
correct USB_PRODUCT for TG-Watch
2021-01-14 00:02:56 -05:00
Jonah Yolles-Murphy
8f8af90098
final name and extra board
2021-01-13 23:51:34 -05:00
Lucian Copeland
37a8c1c575
Complete non-blocking implementations, add socket close checking
2021-01-13 19:05:07 -05:00
Dan Halbert
ccace62ac9
don't check length for remote characteristic or dedescriptor
2021-01-13 15:35:51 -05:00
Dan Halbert
92a4398996
Merge pull request #3982 from jepler/esp32s2-make-flash
...
esp32s2: Fix 'make flash'
2021-01-13 11:08:15 -05:00
Jeff Epler
c44c99398d
Merge pull request #3983 from dhalbert/6.1.0-shrink-builds
...
shrink some de_DE builds
2021-01-12 20:19:43 -06:00
Jeff Epler
8d24e72981
Merge pull request #3978 from ladyada/neotrinkey
...
samd21 board with only 4 neopixels + two touchpads
2021-01-12 20:19:01 -06:00
Dan Halbert
4b30412871
shrink some de_DE builds
2021-01-12 18:23:37 -05:00
Jeff Epler
ed0cb248e9
esp32s2: Fix 'make flash'
...
As reported by @jerryneedell, this change was incorrect; the given
ESPTOOL_FLAGS caused `write_flash` to be repeated twice, which doesn't
work.
Closes #3981 .
2021-01-12 16:04:29 -06:00
Lucian Copeland
4cdb298a20
WIP of non-blocking calls
2021-01-12 15:05:28 -05:00
Dan Halbert
f9c762256f
Merge pull request #3733 from jepler/audioout-esp32
...
esp32s2: Add I2SAudioOut
2021-01-12 13:25:40 -05:00
Dan Halbert
4be5e914ac
Merge pull request #3966 from dhalbert/samd-dac-channels
...
fix atmel-samd DAC channel selection logic
2021-01-12 13:01:50 -05:00
lady ada
748d44892d
fix some precommit complaints
2021-01-12 12:55:02 -05:00
lady ada
f7f97ae1b7
samd21 board with only 4 neopixels + two touchpads
2021-01-12 12:50:08 -05:00
Scott Shawcroft
bfdaa6eb9c
Merge pull request #3959 from ladyada/main
...
try adding new feather def
2021-01-12 08:26:29 -08:00
Jeff Epler
1ca29ec47c
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-12 09:23:07 -06:00
microDev
cd16f29efd
Merge branch 'main' into TouchAlarm
2021-01-12 18:28:38 +05:30
Scott Shawcroft
4db55652a3
Merge pull request #3964 from dhalbert/ble-timing-fixes
...
Round BLE timing values; fix timeout check
2021-01-11 16:52:14 -08:00
Dan Halbert
452d66dd0e
Update ports/atmel-samd/common-hal/analogio/AnalogOut.c
...
whoops, yes!
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-11 19:12:52 -05:00
Scott Shawcroft
081249f796
Merge pull request #3944 from BennyE/wifi-authmode
...
esp32-s2: Adding authmode keyword
2021-01-11 16:05:28 -08:00
Scott Shawcroft
3cf4d9c57f
Merge pull request #3954 from anecdata/mpconfigport
...
ESP32-S2: added sys.platform
2021-01-11 16:03:17 -08:00
Scott Shawcroft
10093d37c5
Merge pull request #3960 from dhalbert/pwmout-tcc-resolution
...
Look up TCC resolution as necessary
2021-01-11 15:33:59 -08:00
Scott Shawcroft
3a7755b311
Merge pull request #3930 from jerryneedell/jerryn_feathers2_led
...
UMFEATHERS2 - implement use of DotStar for status led
2021-01-11 15:29:09 -08:00
Scott Shawcroft
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
Scott Shawcroft
b0eb91dfef
Merge pull request #3955 from caiokat/fix_recvfrom_into
...
Fix socket.recvfrom_into()
2021-01-11 15:20:56 -08:00
microDev
5f448139e0
fixes and enhancement for touch alarm
...
- prevent touch alarm initialization if not set
- fix wake_alarm is set to touch alarm on autoreload
- add ability to have multiple touch alarms in light sleep
2021-01-11 15:30:45 +05:30
Dan Halbert
316bd0c72d
fix atmel-samd DAC channel selection logic
2021-01-10 19:22:15 -05:00
Dan Halbert
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
lady ada
c87e1a6527
ok lets try without auto-display
2021-01-10 11:58:39 -05:00
BennyE
53e4d78a3c
Update ports/esp32s2/common-hal/wifi/Network.c
...
Avoid to use yet another variable.
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-10 17:18:43 +01:00
Jonah Yolles-Murphy
8652d69614
update TG-Watch pins, name, and frozen libraries
2021-01-10 04:04:50 -05:00
lady ada
d036620c70
compilier
2021-01-09 23:19:04 -05:00
lady ada
5b9ce9e7cf
fix dup usb
2021-01-09 22:42:43 -05:00
lady ada
b5b0d45b73
add tft
2021-01-09 22:36:54 -05:00
lady ada
68a5e6dcba
copypaste typo
2021-01-09 15:52:58 -05:00
Dan Halbert
908e02439d
Look up TCC resolution as necessary
2021-01-09 15:04:23 -05:00
Jeff Epler
e20c65d8f0
background tasks: Add, use port_wake_main_task
...
Some ports need an extra operation to ensure that the main task is
awoken so that a queued background task will execute during an ongoing
light sleep.
This removes the need to enable supervisor ticks while I2SOut is operating.
Closes : #3952
2021-01-09 14:02:47 -06:00
Jeff Epler
4735cf4747
esp32s2: audiobusio: move i2s_common inside
...
Originally, I believed the implementation might be shared with AudioOut,
as on the ESP32 (non-S2) the I2S peripheral was also used to drive the DAC.
However, this is not the case on ESP32-S2 and appears it will not be
the case with the ESP32-S3 or -C3, to the extent that there's skeletal
support for either of them in esp-idf master branch.
However, it could still be shared by I2SIn or PDMIn (the latter being
hypothetically implemented as I2SIn + digital postprocessing like we did
in the atmel-sam port, to my understanding), so I moved it to
the common-hal folder.
2021-01-09 14:02:47 -06:00
Jeff Epler
10861b4038
esp32s2: Rename ESP_CALL_RAISE to CHECK_ESP_RESULT
...
Suggested by @tannewt, thanks!
2021-01-09 13:41:44 -06:00
lady ada
a600fd3478
forgot deinit
2021-01-09 14:01:58 -05:00
lady ada
301facf102
newline
2021-01-09 13:36:21 -05:00
lady ada
7de1da45da
woops out of sync header, plus... i dunno add some frozen modules cause we have almost no RAM :(
2021-01-09 13:23:17 -05:00
lady ada
813fa671f3
nowhitespace
2021-01-09 12:29:08 -05:00
Limor "Ladyada" Fried
9253351fa4
Merge branch 'main' into main
2021-01-09 12:25:16 -05:00
lady ada
999ee68e12
try adding new feather def
2021-01-09 12:22:53 -05:00
foamyguy
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
Caio Henrique de Queiroz Katayama
7b4558b750
Fix socket.recvfrom_into()
2021-01-08 19:17:17 -05:00
anecdata
06ab848a0d
added platform
2021-01-08 16:48:25 -06:00
jerryneedell
de5b138dcf
remove commented line
2021-01-08 14:46:37 -05:00
jerryneedell
7556f38f04
initialize LDO2 in board_init()
2021-01-08 14:40:06 -05:00
Dan Halbert
39c166ba6a
update tinyusb; _ticks_enabled only for SAMD21
2021-01-08 13:30:11 -05:00
Jeff Epler
5f0e41ad60
I2SOut: Enable ticks during audio playback
...
.. otherwise, the background callback to load the I2S fifos does not get
run. (I'm not sure this is _correct_ behavior of sleep + background
tasks, but it is the current behavior)
2021-01-08 09:01:34 -06:00
Jeff Epler
430bcdb59d
port_i2s_play: fill the initial buffer via background callback
...
There were _possibly_ problems where this routine was being entered
by direct call AND by background callback. Schedule the work here,
and it will be done almost immediately, without worry about interference.
I don't know if this is strictly necessary, but it doesn't hurt. Since
the I2S clock is being run all the time, we have to enter the background
task to fill the FIFO with zeros constantly anyway.
2021-01-08 08:49:25 -06:00
Jeff Epler
12264cca34
port_i2s_play: remove build error
2021-01-08 08:47:13 -06:00
Jeff Epler
0b7a4c4b2b
i2s_fill_buffer: remove debug print
2021-01-08 08:46:56 -06:00
Jeff Epler
873a300d02
i2s_fill_buffer: Need to fill with zeros when stopping
2021-01-08 08:46:41 -06:00
Jeff Epler
cfd8288dfa
esp2s2: enlarge stack-buffer, use it instead of i2s_zero_dma_buffer
...
.. it's not clear that there was a problem with i2s_zero_dma_buffer, but
just in case.
2021-01-07 16:29:52 -06:00
Jeff Epler
d3afda61d8
esp32s2: i2s: must reset buffer, otherwise wave samples don't start
...
.. and other housekeeping when starting to play a sample
2021-01-07 16:29:08 -06:00
Jeff Epler
352226402c
esp32s2: i2s: fix accounting for "stretched" frames
2021-01-07 16:28:33 -06:00
Jeff Epler
010a4e7b0f
esp32s2: port: Ensure JTAG pins are available for debugging
2021-01-07 16:23:21 -06:00
Bernhard Boser
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
BennyE
115f3e0867
Updated code as per helpful suggestion
2021-01-07 23:05:16 +01:00
Jeff Epler
7bb196b9d2
esp32s2: 'make flash': Allow customizing the esptool flags
...
This can be useful so that e.g., on a Kaluga when programming via
the FTDI chip, you can override the variable to specify "--after=hard_reset"
to automatically return to running CircuitPython, choose a different
baud rate (921600 is about 2s faster than 460800), etc:
make BOARD=espressif_kaluga_1 ESPTOOL_FLAGS="-b 921600 --before=default_reset --after=hard_reset"
2021-01-07 15:01:33 -06:00
Jeff Epler
30c6dd3f76
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-07 14:11:14 -06:00
jerryneedell
6976ec6ef9
Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led
2021-01-07 15:02:40 -05:00
Scott Shawcroft
55c80754c7
Merge pull request #3945 from 2bndy5/fix-table-in-a-readme
...
convert esp32s2 port readme to rst
2021-01-07 10:43:34 -08:00
Scott Shawcroft
0b0b476be6
Merge pull request #3940 from caternuson/magtag_accelo_irq_pin
...
Add MagTag accelo IRQ pin
2021-01-07 10:31:33 -08:00
Dan Halbert
5358524941
Merge pull request #3939 from dhalbert/tick-overflow
...
overflowed tick counter needs 64 bits everywhere
2021-01-07 13:01:30 -05:00
brendan
18122e0455
missed a couple inline code snippets
2021-01-06 15:28:19 -08:00
brendan
092331eee1
convert esp32s2 readme to rst
2021-01-06 15:19:40 -08:00
BennyE
66d87782be
Adding authmode keyword
2021-01-06 23:52:30 +01:00
caternuson
9db0a4f265
add magtag accelo irq pin
2021-01-06 09:17:19 -08:00
Scott Shawcroft
a33359762d
Merge pull request #3903 from anecdata/reasons
...
ESP32-S2: Log all Wi-Fi events & remove unneeded call
2021-01-06 08:41:19 -08:00
Dan Halbert
9a1d864331
overflowed tick counter needs 64 bits everywhere
2021-01-06 11:09:06 -05:00
jerryneedell
14e2a02c04
Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led
2021-01-06 05:47:37 -05:00
anecdata
98c9492a8c
change ESP_EARLY_LOG* to ESP_LOG* throughout event_handler
2021-01-05 18:39:51 -06:00
iot49
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
Kattni Rembor
bbd4de33d1
Add adafruit_bus_device to CPX builds.
2021-01-04 15:53:39 -05:00
jerryneedell
ec02102409
implment use of DotStar for staus led
2021-01-04 07:41:25 -05:00
Limor "Ladyada" Fried
dcf88e1e91
Merge pull request #3923 from bwshockley/Add_dotstar_mini_sam_m4
...
Add dotstar mini sam m4
2021-01-03 19:40:43 -05:00
Seon Rozenblum
10f178d162
Fixed incorrect pin assignment on header
...
IO13 is for blue LED
IO14 is the correct pin header between IO18 and IO12
The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c
Silk will be updated on next PCB production run
2021-01-04 10:06:32 +11:00
Benjamin Shockley
9286f26831
Added CP Dotstart Lib to Build
...
Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED.
2021-01-03 10:42:58 -06:00
askpatricw
2ce07209df
changes based on UM's input
2021-01-01 17:23:11 -08:00
askpatricw
220501e159
dupe LED entries
2020-12-31 18:02:44 -08:00
askpatricw
43f93b097f
release and pre-release FeatherS2 NSync
2020-12-31 17:50:41 -08:00
Jeff Epler
5698b8bb0a
Merge pull request #3850 from microDev1/touch-s2
...
Support for Touch Alarm
2020-12-30 16:25:11 -06:00
microDev
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
microDev
b83bdc540d
enable light-sleep functionality
2020-12-31 02:22:20 +05:30
Dan Halbert
fb216148ec
Merge pull request #3900 from jepler/restore-frozen-busdevice
...
Restore frozen adafruit_bus_device module
2020-12-30 13:22:46 -05:00
microDev
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
Jeff Epler
83c6774a44
Revert "Removing frozen libs"
...
This reverts commit 23ed3ef971
2020-12-30 10:55:28 -06:00
microDev
c7f68022ef
add pretend-to-sleep functionality
2020-12-30 22:11:22 +05:30
anecdata
d537d94a4c
see what we're missing
2020-12-30 09:45:15 -06:00
anecdata
0914b71653
remove unneeded set_config (wrong param; called in connect anyway)
2020-12-30 09:26:25 -06:00
Hugo Dahl
72cad49c69
Fix minor typo in ESP32S2 readme
2020-12-29 22:52:59 -06:00
Jeff Epler
a7542598a0
esp32s2: add I2SOut
2020-12-29 14:46:38 -06:00
Jeff Epler
b40a579d18
esp32s2: espidf: Consistent error checking of esp-idf calls
...
By surrounding most ESP-IDF API calls with this new macro, their failure will
result in a CircuitPython exception.
2020-12-29 14:06:32 -06:00
Jeff Epler
05ba1431c3
esp32s2: espidf: Add IDFError
...
this is an exception class for "generic" IDF errors that don't have
their own exception type.
2020-12-29 14:06:32 -06:00
Jeff Epler
d024df6b06
esp32s2: Use better optimizer flags in debug builds
...
(note that the before and after files both lack trailing newlines; this is
how the esp-idf do)
OPTIMIZATION_DEFAULT is -Og, which enables optimizations that do not
interfere with the debugger:
```
elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT)
list(APPEND compile_options "-Og")
```
2020-12-29 14:06:32 -06:00
Jeff Epler
7401aa8e85
Merge pull request #3888 from microDev1/fix-reset-pin
...
FIX : common_hal_reset_pin()
2020-12-29 10:08:47 -06:00
Scott Shawcroft
f9d9c031a9
Merge pull request #3878 from xobs/fomu-fixes-6.0.0
...
Fomu fixes for 6.0.0
2020-12-28 11:51:26 -08:00
Scott Shawcroft
c3396e4b49
Merge pull request #3868 from BennyE/wifi-enhancement-countrycode
...
esp32-s2: wifi enhancement to include countrycode
2020-12-28 11:49:41 -08:00
Dan Halbert
171efd55e0
Merge pull request #3830 from tannewt/pin_alarm
...
Add pin alarming
2020-12-28 12:59:27 -05:00
microDev
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
Scott Shawcroft
6c7e6abcfd
Downgrade OTA API for IDF 4.2
2020-12-27 20:30:49 -08:00
Uwe Gartmann
2729666d82
SAMD51: change of DAC power setting
...
Fixes wrong DAC output levels at high data rate
closes adafruit#3796
2020-12-25 17:53:43 +01:00
BennyE
64bb055700
Updating comment to reflect feedback of espressif from IDFGH-4486 -> works correct as per the protocol
2020-12-24 15:40:53 +01:00
Sean Cross
2f95cc95a4
litex: move more critical code to RAM
...
The XIP SPI flash on Fomu is slow, which results in certain operations
taking a long time. This becomes a problem for time-critical operations
such as USB.
Move various calls into RAM to improve performance.
This includes the call to __modsi3 and __udivsi3 which are used by the
supervisor handler to determine if periodic callbacks need to be run.
This finishes fixing #3841
Signed-off-by: Sean Cross <sean@xobs.io>
2020-12-24 14:06:57 +08:00
Sean Cross
f3e54414e5
litex: ensure we don't re-enable interrups during ISR
...
During an interrupt handler, interrupts are implicitly disabled. They
will be re-enabled when the interrupt handler returns.
Due to some changes that were made, varous calls will re-enable
interrupts after they're finished. Examples of this include calling
`CALLBACK_CRITICAL_END` and getting the number of ticks with
`port_get_raw_ticks()`.
This patch prevents this from happening by doing two things:
1. Use standard calls in `port_get_raw_ticks()` to disable and re-enable
interrupts, preventing nesting issues, and
2. Increase the nesting count inside `isr()`, reflecting the implicit
call that is made by hardware when an interrupt is handled
This helps to address #3841 .
Signed-off-by: Sean Cross <sean@xobs.io>
2020-12-24 14:03:10 +08:00
Dan Halbert
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
BennyE
1a6b1b1953
implementing suggested changes
2020-12-24 00:37:37 +01:00
Dan Halbert
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
Scott Shawcroft
1a8033470a
Stub out mp_hal_is_interrupted for UNIX
2020-12-23 12:22:50 -08:00
Scott Shawcroft
eb65765d52
Merge pull request #3867 from dhalbert/frequencyin-fix-6.0.x
...
FrequencyIn: do not raise in interrupt handler
2020-12-23 12:14:16 -08:00
BennyE
e9c9fce15d
Remove debug log messages
2020-12-23 14:59:09 +01:00
Scott Shawcroft
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
Dan Halbert
89079039ad
FrequencyIn: do not raise in interrupt handler
2020-12-22 18:54:42 -05:00
Scott Shawcroft
8b03951fee
Merge pull request #3866 from jepler/use-stub
...
esp32s2: make flash: use the stub
2020-12-22 10:16:54 -08:00
Jeff Epler
da8f023665
esp32s2: make flash: use the stub
...
Very long ago, this was apparently not supported in esptool yet, at
least when operating over USB CDC. This now works just fine, and
our esp webtool relies on it as well. It makes flashing faster,
too.
2020-12-22 10:27:42 -06:00
Dan Halbert
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
Jonathan Giles
aaa3c61819
Add default I2C pins for STM32F411CE
2020-12-22 09:11:05 -05:00
Dan Halbert
d6df43b943
Merge pull request #3863 from dhalbert/adafruit-prefix
...
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-22 08:02:35 -05:00
Dan Halbert
39ca406a31
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-21 23:32:11 -05:00
Scott Shawcroft
6347a3fcdb
Merge pull request #3812 from microDev1/ota-s2
...
Support for OTA update
2020-12-21 18:46:13 -08:00
Scott Shawcroft
fb0c74c5f1
Merge pull request #3662 from ElectronicCats/bastble
...
Add new board BastBLE
2020-12-21 17:39:08 -08:00
