djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
25,292 Commits 21 Branches 274 Tags 785 MiB
752bf6e4e0
Commit Graph

1839 Commits

Author SHA1 Message Date
Jeff Epler
26d33658ea samd: diagnose out of range I2C frequency 
The frequency divisor is limited to 255, which gives 48MHz/2/255 ~= 94.1kHz as
the lowest speed.

Without this change, values below this cut-off gave higher frequencies instead,
which didn't appear to have any relation to the frequency value requested.

Closes: #4883
 2021-08-20 15:22:35 -05:00
Scott Shawcroft
9f051ec7bf
Fix usb calibrated SAMD21 builds 2021-08-20 12:45:59 -07:00
Scott Shawcroft
5c6e80a2bb
Shrink builds by defining advanced micropython API 
Also, ignore more pins on SAMD boards and disable EXFAT on others.
 2021-08-19 16:49:33 -07:00
Scott Shawcroft
d2860b58b0
Check background pending before sleep 
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.

Fixes #5086 and maybe others.
 2021-08-19 12:18:13 -07:00
Jeff Epler
cabe96e188 canio: Run background tasks while waiting for message reception 
Closes: #5004
 2021-08-18 11:39:40 -05:00
Scott Shawcroft
e0ce5ff045
Fix some builds by disabling exfat 2021-08-18 08:22:29 -07:00
Dan Halbert
5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes 
Support multiple reports per device in usb_hid
 2021-08-17 17:14:28 -04:00
Ryan A. Pavlik
a77e269121
cp_sapling_m0_revb: board.UART not board.uart 
This is the only board that didn't match the all-uppercase convention for these UART (and more generally, these bus) entries.
 2021-08-16 17:07:17 -05:00
Dan Halbert
f37e1d7bf5 squeeze a couple of boards 2021-08-14 17:36:05 -04:00
Scott Shawcroft
3ffab36cdc
Merge remote-tracking branch 'adafruit/main' into fix_samd_timer_leak 2021-08-13 15:20:25 -07:00
Scott Shawcroft
de796e2304
Move OneWire to onewireio from busio 
This will allow finer grained inclusion in 8.0.0

Fixes #5135
 2021-08-12 10:47:14 -07:00
Scott Shawcroft
fb6b438580
Make getpass and traceback full build only 
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.

Also, tweak two Arduino boards to save space on them.
 2021-08-11 14:47:35 -07:00
Scott Shawcroft
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote 2021-08-11 13:43:59 -07:00
Scott Shawcroft
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod 
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
 2021-08-11 12:19:16 -07:00
Scott Shawcroft
7f016ae11e
Fix build with filter to do OR 2021-08-11 12:10:51 -07:00
Scott Shawcroft
083960ce90
Fix SAMD51 builds and Prox Trinkey 
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
 2021-08-11 11:53:26 -07:00
Scott Shawcroft
ebf0901558
Merge pull request #5079 from dhalbert/debug-audio 
Fix various RP2040 and SAMD audio issues
 2021-08-11 11:19:53 -07:00
Scott Shawcroft
b56455ffbb
Allow sleep while paused 2021-08-11 10:48:39 -07:00
Scott Shawcroft
67c6932ca2
Reset timers separate from pwmio 
This prevents timer leakage on builds without pwmio.

Fixes #5057
 2021-08-11 09:58:31 -07:00
Scott Shawcroft
f0859ac954
Switch SAMD21 ticks to PER event 
The EVSYS is used to generate an interrupt from the event. This
simplifies timing used in pulseio that conflicted with the
auto-reload countdown.

Fixes #3890
 2021-08-10 15:23:45 -07:00
Chris Wilson
e741330ca8 Consistent pin naming for SparkFun MicroMod processor boards. 2021-08-09 23:10:52 -07:00
microDev
93c9d59960
Merge branch 'main' into getpass 2021-08-10 01:00:10 +05:30
Dan Halbert
2451c788f4 valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad 2021-08-09 09:47:13 -04:00
Dan Halbert
59b89fdc5c Fix various audio DMA issues: 
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`

RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
 2021-08-09 09:47:13 -04:00
Dan Halbert
fd71d924d2 partial buffer mgmt fix 2021-08-09 09:47:13 -04:00
microDev
51f8603783
add getpass module 2021-08-09 17:50:28 +05:30
Nathan Young
579194a543 Colocated board.LED and D13 together (GCM4) 2021-08-09 05:35:38 +02:00
Nathan Young
a15ac65fa0 Add board.LED for Grand Central M4 Express 
Fixes #5111
 2021-08-08 21:43:12 +02:00
microDev
063e3946d6
Merge pull request #5094 from jepler/quirc 
Add qrio: Decode QR codes with quirc lib
 2021-08-07 09:30:20 +05:30
Scott Shawcroft
be2342f32f
Merge pull request #5072 from microDev1/traceback 
Add traceback module
 2021-08-06 12:10:17 -07:00
Brian Dean
821f3d5532 board bdmicro_vina_d51: Add support for MX25L12833F flash chip. Add QSPI activity indicator LED. Add D15-D19 as aliases for the I2S peripheral pins. 2021-08-05 09:14:51 -04:00
Jeff Epler
ac4b10bcd9 It's "shared-module", not "shared-modules" 2021-08-03 10:37:47 -05:00
Scott Shawcroft
d5cdceb9b9
Use all 4 status pixels on neotrinkey too 2021-07-28 14:25:21 -07:00
Dan Halbert
e9369d50e1
Merge pull request #5067 from tannewt/pulseout_switch 
Switch to pin, frequency and duty_cycle PulseOut
 2021-07-28 14:58:06 -04:00
microDev
f371c0a609
add traceback module 2021-07-28 18:06:23 +05:30
Kattni
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad 
remove gamepad; deprecate gamepadshift
 2021-07-27 11:35:06 -04:00
Dan Halbert
901a6c27c0 remove gamepad; deprecate gamepadshift 2021-07-26 22:15:09 -04:00
Scott Shawcroft
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch 2021-07-26 18:48:59 -07:00
Scott Shawcroft
412eb87080
Switch to pin, frequency and duty_cycle PulseOut 
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0

This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.

Most of the way for #3264

Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
 2021-07-26 18:35:49 -07:00
Dan Halbert
11ca505fdb add board.LED wherever possible 2021-07-26 19:57:12 -04:00
lady ada
f3a286a7ea can we add busdevice and have room? 2021-07-25 14:45:35 -04:00
Scott Shawcroft
70cbb4eddb
Support multiple status neopixels 
Use the 10 neopixels on the playgrounds for status.

Fixes #5039
 2021-07-23 15:17:09 -07:00
Scott Shawcroft
f84cb94819
Remove OSError(0) and old network modules 
The newer modules are `socketpool` and `ssl`.

Fixes #3924, related to #2021, closes #1880, closes #2273, closes #2274
 2021-07-21 17:33:40 -07:00
Scott Shawcroft
fece0fb432
Fix crash when UART construct fails 
After the script stops with the exception thrown the final gc_sweep
will call any finalizers and they usually call deinit. deinit on
invalid objects can wreak havoc by changing random memory or
(hopefully) crashing. This fixes ensures the object is deinited
until initialization succeeds and the object is valid.

Do the same fix for I2C and SPI too.

Fixes #4700 and fixes #5005
 2021-07-20 17:15:19 -07:00
Scott Shawcroft
e042d54702
Fix three boards and xtensa cache key 2021-07-16 11:15:05 -07:00
Scott Shawcroft
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset 
Now we use never_reset which is generally more correct and easier
to get right.

Fixes #5001 and fixes #4997
 2021-07-15 16:20:04 -07:00
BoB LeSuer
35030fbb30 added pin object to analogout 2021-07-12 20:33:42 -04:00
Scott Shawcroft
0e88b77b3e
Merge pull request #4977 from pewpew-game/samd21-filesystem-size 
Allow changing size of the filesystem on samd21 per board
 2021-07-09 11:00:13 -07:00
Kattni Rembor
825a706135 Turn off MIDI on one build, fix name. 2021-07-08 17:31:10 -04:00
Radomir Dopieralski
92fa1055ef Allow changing size of the filesystem on samd21 per board 
As the CircuitPython grows, it may at some point no longer be possible
to squeeze it on some of the flash-less SAMD21 boards, so it would be
good to have the option of shrinking the filesystem size on per-board
basis. This change allows to define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE
inside the board's mpconfigborard.h file.
 2021-07-08 22:19:54 +02:00
Dan Halbert
d886e8041d Turn off pwmio on meow meow for space reasons 2021-07-01 22:14:37 -04:00
Dan Halbert
33bbb8b1f4 RP2040 PWMAudioOut: Release DMA channels after play has finished. 2021-07-01 17:36:29 -04:00
Radomir Dopieralski
1a076d34c9 PewPew M4: use keypad instead of gamepad 
Since the new keypad module is taking over gamepad functionality,
I'm switching to it. If this works well, I will make the change
for the remaining boards.
 2021-06-29 10:36:52 +02:00
Scott Shawcroft
b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events 
keypad: support for vector and matrix key scanning
 2021-06-24 10:25:21 -07:00
Tsutomu IKEGAMI
15fc4c21b6 Fix typo in pin names I2S_SDIN/SDOUT of Wio Terminal 2021-06-24 21:24:23 +09:00
Dan Halbert
ed41acd879 merge from upstream to fix translations 2021-06-21 08:26:44 -04:00
Limor "Ladyada" Fried
6dbeb75a4f
Merge pull request #4880 from jepler/esp32s2-imagecapture 
Esp32s2: implement ParallelImageCapture
 2021-06-19 16:17:56 -04:00
Dan Halbert
db297add67 fix other too-big builds 2021-06-18 13:20:31 -04:00
Dan Halbert
03adbbca7c turn off keypad by default on all SAMD21, for now 2021-06-18 12:26:48 -04:00
Dan Halbert
04b69cde9b turn off gamepad on most builds;turn off keypad where appropriate 2021-06-17 13:46:45 -04:00
Dan Halbert
4655a71793 Turn off keypad on some builds to avoid overflow 2021-06-15 14:11:04 -04:00
Tsutomu IKEGAMI
fd222dd066 Fix typo in Wio Terminal pin board.I2S_BLCK to I2S_BCLK (bit clock) 2021-06-15 20:51:55 +09:00
Kattni Rembor
12d0e65a2a Space out pin groups. 2021-06-14 15:37:02 -04:00
Kattni Rembor
f96642de25 Add A0 as alias to pot pin. 2021-06-14 15:32:12 -04:00
Jeff Epler
268717e427 ParallelImageCapture: Switch to taking a list of pins 
.. adopting validate_pins from RGBMatrix into shared-bindings

.. updating other platforms for API change
 2021-06-10 11:15:18 -05:00
Jeff Epler
26a75f74ec
Merge pull request #4862 from DavePutz/issue_3383 
Fix for issue #3383 - SAMD5x microcontroller.cpu.voltage
 2021-06-09 14:42:27 -05:00
root
bc34403d71 Removed all references to MICROCONTROLLER_VOLTAGE_DISABLE 2021-06-09 10:46:14 -05:00
root
72db13fc2d enable microcontroller.cpu.voltage on SAME54 2021-06-08 10:04:40 -05:00
root
b2dea8ae0d Fix for issue #3383 - SAMD51 microcontroller.cpu.voltage 2021-06-05 16:17:14 -05:00
George White
9cde8a2265
MicroMod SAMD51 - correct I2C_INT pin 2021-06-03 06:05:13 -04:00
George White
26c6bd2346
MicroMod SAMD51 - correct SCL2 2021-06-03 05:39:09 -04:00
George White
6e36f30d9f
MicroMod SAMDt1 - correct board nane 2021-06-03 05:36:05 -04:00
George White
2b068414e1
Fix missing comma 
Doh
 2021-06-02 23:13:08 -04:00
George White
0437199706
Fix some pin mappings 
Conflicts:
	ports/atmel-samd/boards/sparkfun_samd51_micromod/pins.c
 2021-06-02 22:22:04 -04:00
George White
4c493c86c8 Add Sparkfun MicroMod SAMD51 2021-06-02 22:05:58 -04:00
George White
db1830d62b Add Sparkfun MicroMod SAMD51 2021-06-02 21:53:23 -04:00
Dan Halbert
3930440bc5 Fix usb_cdc.enable(console=False, data=True) 2021-06-02 11:29:56 -04:00
Scott Shawcroft
892dfa84ed
Merge pull request #4826 from jepler/actions-windows-build 
Check that select firmwares build on Windows with MSYS2
 2021-06-01 13:04:06 -07:00
Jeff Epler
6b476c19ba fix formatting 2021-05-29 08:10:10 -05:00
Jeff Epler
b0dd0e344c
Merge pull request #4772 from EmergReanimator/atmel-samd 
[resolves #4771] DEBUG UART supported on ATMSAME5x
 2021-05-28 20:05:06 -06:00
Jeff Epler
49db85cb3d Check that select firmwares build on Windows with MSYS2 
This configuration is used by @ladyada and more often than it should
we've discovered late that a change introduced problems building
there.

By adding this to regular CI, hopefully we learn about and fix these
issues sooner rather than later.
 2021-05-28 16:47:29 -05:00
Dan Halbert
5eb4cc6489 Remove non-product Adafruit boards 2021-05-26 16:01:17 -04:00
Scott Shawcroft
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led 2021-05-20 08:35:15 -07:00
EmergReanimator
7805392b9e
Update UART.c 
Incorporating feedback: https://github.com/adafruit/circuitpython/pull/4772#discussion_r634112839
 2021-05-19 20:19:16 +02:00
Scott Shawcroft
642fbcf87a
Handle status led power 
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
 2021-05-19 10:57:14 -07:00
EmergReanimator
2b64b1d335 [resolves #4771] DEBUG UART supported on ATMSAME5x 2021-05-17 21:22:24 +02:00
Limor "Ladyada" Fried
9752162508
Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins 
Update various Trinkey pins and add _pixelbuf
 2021-05-15 11:52:33 -04:00
Dan Halbert
ea0e18d2e0 fix logic for suppressing ja and ko clean builds when not necessary 2021-05-14 23:41:44 -04:00
Dan Halbert
1e2a945782 Make busio.SPI be NotImplementedError on proxlight to save space 2021-05-14 21:52:54 -04:00
Scott Shawcroft
5c33c9d597
Fix SAMD 
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
 2021-05-14 16:14:24 -07:00
Dan Halbert
990e58902d add CIRCUITPY_PIXELBUF to all trinkeys; add NeoPixel to prox 2021-05-14 17:09:15 -04:00
Dan Halbert
6a2ba83e30 Update Rotary Trinkey and Slide Trinkey pins 2021-05-14 15:40:29 -04:00
Dan Halbert
fa6c06fb38 count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:59:02 -04:00
Scott Shawcroft
1a0b4193b7
Simplify the status LED to save power 
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
 2021-05-13 14:41:20 -07:00
Dan Halbert
0eb4b9b982
Merge pull request #4742 from kattni/led 
Add LED pin to Adafruit boards.
 2021-05-10 21:12:02 -04:00
Kattni Rembor
294ef59f27 Add LED pin to Adafruit boards. 2021-05-10 16:39:01 -04:00
Scott Shawcroft
4eb4f14840
Merge pull request #4734 from dhalbert/dynamic-usb-fixes 
fix HID; fix interface name table creation
 2021-05-10 12:55:29 -07:00
Ben Bleything
44f162bb64
free up PA00 and PA01 on BHB 2021-05-09 10:19:48 -07:00
Dan Halbert
becff6f93d restore pulseio to pirkey 2021-05-09 11:33:35 -04:00
Jeff Epler
5e06c91244
Merge pull request #4716 from tyomitch/main 
s/Circuit Python/CircuitPython/g
 2021-05-08 08:47:29 -05:00