1a0b4193b7
This also removes the need to pin share because we don't use the status LED while user code is running. The status flashes fallback to the HW_STATUS LED if no RGB LED is present. Each status has a unique blink pattern as well. One caveat is the REPL state. In order to not pin share, we set the RGB color once. PWM and single color will be shutoff immediately but DotStars and NeoPixels will hold the color until the user overrides it. Fixes #4133 |
||
|---|---|---|
| .. | ||
| asf4@84f56af132 | ||
| asf4_conf | ||
| bindings/samd | ||
| boards | ||
| common-hal | ||
| freetouch@b6859a349e | ||
| modules | ||
| peripherals@a7e39c4d01 | ||
| sd_mmc | ||
| supervisor | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| Makefile | ||
| README.rst | ||
| audio_dma.c | ||
| audio_dma.h | ||
| background.c | ||
| background.h | ||
| eic_handler.c | ||
| eic_handler.h | ||
| fatfs_port.c | ||
| ld_defines.c | ||
| mpconfigport.h | ||
| mpconfigport.mk | ||
| mphalport.c | ||
| mphalport.h | ||
| qstrdefsport.h | ||
| reset.c | ||
| reset.h | ||
| samd_peripherals_config.h | ||
| timer_handler.c | ||
| timer_handler.h | ||
README.rst
SAMD21 and SAMD51
==================
This port supports many development boards that utilize SAMD21 and SAMD51 chips. See
https://circuitpython.org/downloads for all supported boards.
Building
--------
For build instructions see this guide: https://learn.adafruit.com/building-circuitpython/
Debugging
---------
For debugging instructions see this guide: https://learn.adafruit.com/debugging-the-samd21-with-gdb
Port Specific modules
---------------------
.. toctree::
../../shared-bindings/samd/index