Commit Graph

1065 Commits

Author SHA1 Message Date
Scott Shawcroft 5c7f6e6211
Remove empty #if and add missing includes. 2020-04-24 11:48:55 -07:00
Dan Halbert 982a755eae
Merge pull request #2801 from simmel-project/nrf-s140-7.0.1
Add NRF S140 7.0.1
2020-04-23 21:59:51 -04:00
Sean Cross 689dd61379 nrf: nrf52833: use s140 v7.0.1
Previously, we were using v6.1.1 which worked, but was unsupported.
v7.0.1 is the first version of s140 that supports the nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-22 13:34:11 +08:00
Sean Cross 09bef7b0e1 nrf: bluetooth: add s140 v7.0.1
This is the first version with official support for nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-22 13:33:39 +08:00
Dan Halbert 2f86e31501 fix calculation of nrf firmware size 2020-04-22 00:52:54 -04:00
Dan Halbert fbc8719fad ringbuf tested 2020-04-21 22:40:12 -04:00
Dan Halbert 77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert 38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Sean Cross c04e6d6f52 nrf: bleio: parameterize softradio configuration
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations.  If a
parameter is unspecified then the previously-defined value is used.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:59 +08:00
Sean Cross 3537ad4059 nrf: mpconfigport: support configuration of various sizes
Conditionally set variables such as the softdevice RAM size, bootloader
size, and the spi m3 buffer size.  This allows ports to adjust these
values to suit their needs.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:58 +08:00
Sean Cross 33720af0c6 nrf: mpconfigport: subtract config size from firmware size
The BLE Config area needs to be subtracted from the size of the firmware.
THis is because the firmware is counted by walking backwards from the end
of memory, and the BLE config area is placed lower in memory than the
firmware.  Subtracting the BLE config size ensures the internal flash
filesystem doesn't try to use the firmware as storage.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:57 +08:00
Sean Cross 3ed5b87b8f nrf: add support for nrf52833
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
Sean Cross 4ad1cbeea3 nrf: make rgbmatrix and framebufferio optional
Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0
in their .mk file in order to prevent these from being built.  This
is necessary for resource-constrained devices.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 10:44:21 +08:00
Sean Cross 066f486b28 nrf: supervisor: support building without BUSIO
Only initialize i2c, spi, and uart if building with BUSIO.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 10:44:20 +08:00
Sean Cross ac9d336f40 nrf: make neopixel support optional
Add a conditional around the call to neopixel_write(), allowing us
to build for nrf without neopixel support.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 09:56:27 +08:00
Scott Shawcroft bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
Jeff Epler 5fcc6d6286 RGBMatrix: finish renaming from Protomatter
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
Jeff Epler 3d6258f63d Rename Protomatter -> RGBMatrix
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
Jeff Epler a32337718d Rename _protomatter -> protomatter
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
Scott Shawcroft 7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
Scott Shawcroft b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler 1d8a073c05 nrf: protomatter port 2020-04-14 18:24:58 -05:00
Jeff Epler 09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Scott Shawcroft 7e69d30c02
Fix nRF PulseIn 2020-04-03 14:22:56 -07:00
Scott Shawcroft 8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Scott Shawcroft cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server
Fix PacketBuffer server support
2020-03-31 13:39:34 -07:00
Jeff Epler 54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
Scott Shawcroft 798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
siddacious 9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
siddacious 7bba79363a allowing backlight change 2020-03-25 22:41:23 -07:00
Scott Shawcroft 8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling 2020-03-25 17:41:47 -07:00
Scott Shawcroft 3551b769a2
Fix connection handle tracking in PacketBuffer when a server. 2020-03-25 13:31:18 -07:00
William Moser c961ed9025 Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files 2020-03-24 13:25:02 -04:00
Jeff Epler d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Scott Shawcroft 76ca13b6ed
Fix SAMD51 pulsein 2020-03-13 17:21:15 -07:00
Scott Shawcroft 48b5f2a384
Initial work on SAMD 2020-03-13 11:16:41 -07:00
Scott Shawcroft affd3fcc2a
Clear the pending IRQ in the NVIC as well. 2020-03-13 11:16:38 -07:00
Scott Shawcroft 00d5f63e7c
Hopefully fix PulseIn 2020-03-13 11:12:31 -07:00
Scott Shawcroft ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well. 2020-03-13 11:12:31 -07:00
Scott Shawcroft 418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD 2020-03-13 11:12:31 -07:00
Scott Shawcroft 6f60afe8c5
First try at lowering the power consumption 2020-03-13 11:12:30 -07:00
Scott Shawcroft 85f44e20cb
Merge pull request #2695 from TG-Techie/master
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
TG-Techie 197dc344af fix requested changes 2020-03-12 02:31:13 -04:00
TG-Techie b967a2071f changed TG-Watch02A HW_BOARD_NAME 2020-03-10 23:07:25 -04:00
TG-Techie 50b451ae0c add TG-Watch02A board def 2020-03-10 22:40:55 -04:00
TG-Techie fec84054d9 ah 2020-03-06 15:03:37 -05:00
TG-Techie 7198056bc3
Merge pull request #2 from adafruit/5.0.x
5.0.x
2020-03-06 13:57:31 -05:00
Dan Halbert 210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Jeff Epler da31acfcc4 Merge remote-tracking branch 'origin/master' into ulab 2020-03-03 20:13:53 -06:00
Dan Halbert 8435935429 update uses of assert_pin_free; remove redundant checks 2020-02-29 15:37:32 -05:00
Dan Halbert b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
Jeff Epler eef742bf45 oofatfs: Remove _FS_DISK_READ_ALIGNED
This workaround is no longer needed, so it can be removed.

Closes: #2332
2020-02-28 10:04:28 -06:00
Jeff Epler 1e6c08fc30 nrf: sqpi_flash: Handle unaligned reads 2020-02-28 10:03:37 -06:00
TG-Techie 527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie 6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
Jeff Epler fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
ladyada 86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
Scott Shawcroft 28c7a1e9c3
Fix crash after empty REPL session
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
Dan Halbert f63b2c0d0c use realloc instead 2020-02-21 17:36:15 -05:00
Dan Halbert 9cf46ec947 put neopixel_write buffer in root pointers 2020-02-21 08:44:25 -05:00
Dan Halbert 23d6a3dc1f merge from upstream 2020-02-20 22:27:16 -05:00
Dan Halbert 634d246910 relicense nrf SPI.c to MIT 2020-02-20 16:00:21 -05:00
Dave Marples 24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples 490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Dan Halbert dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft e97b0cfc61
Merge pull request #2581 from jamesbowman/master
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
Dan Halbert e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Dan Halbert 2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Drew Fustini 3bf4b42e2e change OH20 badge pin defs to use SWn for buttons
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
Drew Fustini 0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
Dan Halbert 005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert 857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Dan Halbert a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error
Add another error message to BLE
2020-02-05 23:39:17 -05:00
James Bowman acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
Scott Shawcroft 72a1bdab30
Add another error message for extended advertisements at the same
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
Dan Halbert b6da2fa173 nrf: fix i2c frequency setting 2020-02-05 11:25:31 -05:00
James Bowman 7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
[adafruit/circuitpython#2578]
2020-02-03 16:46:14 -08:00
Lady Ada 5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling 64cafe82bc Adjust OHS2020 madctl for default rotation
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
Michael Welling 6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
Michael Welling 33dcdd7c03 Updates to enable working SPI TFT
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
Michael Welling d99c2ffe4f QSPI flash fixes
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
Lady Ada dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert 4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Dan Halbert b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Scott Shawcroft 298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes
nrf: track vm_used_ble better
2020-01-30 10:33:19 -08:00
Dan Halbert 87f73e2729 track vm_used_ble better 2020-01-30 09:52:06 -05:00
hierophect 898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland 100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Wojtek Siudzinski df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Scott Shawcroft b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev
Refine iMX RT memory layout and add three boards
2020-01-27 14:11:08 -08:00
Lady Ada f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Dan Halbert 68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Scott Shawcroft 1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Michael Welling cc77e86408 Update the VID and USB company string
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 15:43:49 -08:00
Michael Welling cc03d68984 Fix backlight pin registration
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 14:53:07 -08:00
Michael Welling 86d454adf3 Initial board support for OHS2020 Badge
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 13:46:56 -08:00
Scott Shawcroft 8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm
nrf: Add bonding to BLE pairing support
2020-01-15 16:11:09 -08:00
Benny Meisels 4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00
Dan Halbert 85dc4089b9 address review comments 2020-01-14 17:23:16 -05:00
Dan Halbert 0367ba7495 fix some typos and leftovers 2020-01-13 18:29:34 -05:00
Dan Halbert 2a75196aa3 merge from adafruit/circuitpython 2020-01-13 18:15:32 -05:00
Dan Halbert 4ad004f24e put bonding to-do flags into Connection objects instead of using a heap-allocated queue 2020-01-13 17:52:32 -05:00
Dan Halbert 9e7f8743c2 fix CCCD bonding store; avoid excessive bonding writes 2020-01-12 23:32:51 -05:00
Dan Halbert 346ce3b73b wip: HID bonding works! 2020-01-10 23:55:45 -05:00
Scott Shawcroft 6ea8d8a6c2
Merge pull request #2498 from dhalbert/optional-i2c-pullup-checking
Make requiring I2C pullups be optional
2020-01-10 11:42:44 -08:00
Scott Shawcroft 8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults
Urandom hardfaults
2020-01-10 11:37:59 -08:00
Dan Halbert 9c167af17a wip; redid flash writing to be compatible with SD 2020-01-09 17:40:02 -05:00
Dan Halbert 189f2d5f07 Make requiring I2C pullups be optional 2020-01-09 17:31:50 -05:00
Jeff Epler 1c6efb9e66 os.urandom: remove unneeded sleep 2020-01-08 16:48:17 -06:00
Roy Hooper 1caf6bd8d3 add missing .h file 2020-01-08 15:23:38 -05:00
Roy Hooper e1c1e32ceb address code review 2020-01-08 15:17:54 -05:00
Roy Hooper 4e040b0152 add reset of heap to board reset for nrf port 2020-01-08 15:15:27 -05:00
Roy Hooper 34c9e00f08 try (re)using the buffer in neopixel_write 2020-01-08 15:14:53 -05:00
Scott Shawcroft 7a94940c89
Replace magic number and add comment. 2020-01-08 11:01:43 -08:00
Scott Shawcroft d4492aaed0
Merge remote-tracking branch 'adafruit/master' into packet_buffer 2020-01-08 10:44:37 -08:00
Jeff Epler b3fb024301 nrf: Call into sd as many times as necessary to fill urandom request
Generating 51200 bytes in one go takes 4.966s, so that's a rate of about
10KiB/s.
2020-01-08 10:06:55 -06:00
Dan Halbert 8d629a957d
Merge pull request #2367 from iot49/mtime
fix mtime on file creation
2020-01-07 17:19:40 -05:00
Dan Halbert 390337b9a5 wip; compiles 2020-01-05 23:33:42 -05:00
Scott Shawcroft 82fb761c0f
Add PacketBuffer and MTU negotiation support.
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.

This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
Scott Shawcroft 776c9b011c
Merge pull request #2432 from tannewt/fix_nrf_uart
Fix nRF UART reset
2020-01-03 16:57:59 -08:00
Scott Shawcroft f6ec1ea172
Throw an error when we cannot allocate PWM pixel buffer 2020-01-03 15:15:36 -08:00
Scott Shawcroft 6afb8dadbc
Change SPI and I2C in the same way. 2020-01-03 15:14:37 -08:00
Dan Halbert 242d572470 wip 2020-01-03 10:24:07 -05:00
Dan Halbert f0d34da556 add display support; rotation 270 2019-12-30 17:39:39 -05:00
Dan Halbert 3f9ebd2fed initial CLUE board defn 2019-12-30 17:10:42 -05:00
Scott Shawcroft cfd71d9023
Fix nRF UART reset
disable only turns off ENABLE but doesn't set the init tracking that
nrfx uses. uninit hangs if ENABLE is off and is called because it
waits forever for TX to stop.
2019-12-27 20:18:07 -08:00
Jeff Epler 51af8aadb7 nrf: PWMAudioOut: 62500Hz limitation is not needed
.. and it gets in the way of some example programs, due to the way
circuitplayground library generates different frequency sine waves
2019-12-19 10:34:56 -06:00
Ha Thach 25df6e613a
Merge pull request #2395 from hathach/nrfx-v2
upgrade nrfx API to v2
2019-12-18 16:14:25 +07:00
hathach dad2663337 update nrfx submodule to v2 2019-12-18 15:39:11 +07:00
Jeff Epler 8137ac4c49 nRF: PWMAudioOut: handle non-looping rawsamples 2019-12-17 08:59:08 -06:00
hathach 894cad2e17 upgrade nrfx API to v2 2019-12-17 21:39:52 +07:00
JoeBakalor 2abccc1745 update vid and pid for teknikio_bluebird 2019-12-16 08:58:56 -05:00
JoeBakalor 32744a04e1 update bluebird make file 2019-12-13 09:08:21 -05:00
Joe Bakalor 3992a870e5
Merge branch 'master' into teknikio/bluebird 2019-12-13 08:55:15 -05:00
JoeBakalor 4bee6536c9 updates to bluebird 2019-12-13 08:52:03 -05:00
Joe Bakalor b484c89b73
Merge pull request #4 from adafruit/master
Pull master
2019-12-13 08:51:06 -05:00
Dan Halbert ef2ef7a6b8 merge from master 2019-12-12 15:51:13 -05:00
Dan Halbert e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
Dan Halbert 7889b999cc Fix flash write error handling; clean up safe mode message printing 2019-12-12 14:41:49 -05:00
JoeBakalor dde7c5e145 Merge branch 'master' of https://github.com/Teknikio/circuitpython 2019-12-12 08:59:37 -05:00
Joe Bakalor bf4138b0e4
Merge pull request #3 from adafruit/master
Pull master
2019-12-12 08:59:22 -05:00
Dan Halbert fd03fd5e4f sd_flash_operation_status should be volatile 2019-12-12 00:19:03 -05:00
Dan Halbert ae64a669dd address review comments 2019-12-11 15:43:06 -05:00
JoeBakalor 0da5dceccf update bluebird makefile 2019-12-11 15:25:16 -05:00
JoeBakalor a273a7c55e add remaining peripheral pin maps and digital/analog pin definitions 2019-12-11 15:23:16 -05:00
JoeBakalor 006d85d5c2 add make file and board configuration, add accelerometer pin mappings 2019-12-11 14:49:59 -05:00
Dan Halbert 1e11f2708b remove debugging leftovers 2019-12-11 09:34:56 -05:00
iot49 73b6e5d8e6 added correct include files 2019-12-10 19:44:11 -08:00
Dan Halbert d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert 68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert 013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Jeff Epler a484a93b29 nRF: disk_read must be 4-byte aligned
.. a requirement that oofatfs needs to be taught to respect.

This problem can be demonstrated with the following snippet, except
that the related file ("test.bin") must also be contiguous on the
filesystem.  You can ensure this by reformatting your device's filesystem
before testing, then copying any single file bigger than 4kB to test.bin.

    f = open("test.bin", "rb")
    f.seek(2048)
    b = bytearray(2048)
    v = memoryview(b)
    f.readinto(v[909:])

Closes: #2332
2019-12-10 14:03:06 -06:00
Joe Bakalor dbc28e35c5
Merge pull request #2 from adafruit/master
Pull master
2019-12-10 11:50:49 -05:00
iot49 0712c95225 fix mtime on file creation 2019-12-09 23:14:26 -08:00
Dan Halbert 60f399395a Add POWER_SWITCH pin to CPB 2019-12-09 18:30:24 -05:00
Jeff Epler 13620cc4db nRF: PWMAudioOut: fix half-speed playback of stereo samples
The "spacing" of "buffer structure" is confusing, use the "channel count"
instead.

Testing performed on nrf52840 feather:

Play stereo and mono, 8- and 16-bit, 8kHz RawSamples representing 333.33Hz
square waves.

Use both mono and stereo PWMAudioOut instances.

Scope the RC-filtered signal and use the scope's frequency
measurement function, verify the frequency is 333 or 334Hz in all tested
cases.

In the "stereo output" cases, verify both the L and R channels.  Verify
the output amplitude is the same in both channels.

In the "stereo output" cases, run a second test where the L channel's
amplitude is attenuated 50%. Verify the output amplitude is correct
in each channel.
2019-12-09 10:57:55 -06:00
Dan Halbert f5e913101c
Merge pull request #2301 from tannewt/support_extended_advertising
Add support for extended (>31 byte) BLE advertisements.
2019-12-06 23:51:05 -05:00
Scott Shawcroft da0ea979ff
Check connection validity after service discovery.
Fixes #2347
2019-12-06 16:03:14 -08:00
Dan Halbert 40434d6919 wip 2019-12-05 22:45:53 -05:00
Scott Shawcroft 17c8356b8c
Add connection interval and debugging
This also sets TinyUSB to master and to not include its submodules.

It also fixes an old displayio example comment and retries gattc
reads.
2019-12-04 14:39:02 -08:00
Jeff Epler 95d9c49e43 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-29 11:27:09 -06:00
Dan Halbert b32a9192df make UART.write be blocking on SAMD; add timeout property 2019-11-27 13:05:29 -05:00
Scott Shawcroft 3fc58cee38
Merge remote-tracking branch 'adafruit/master' into support_extended_advertising 2019-11-26 13:12:43 -08:00
Scott Shawcroft e5dd78d393
Merge pull request #2324 from jepler/nrf-i2s-channels-widths
nrf: assign channel width and count correctly
2019-11-25 16:59:08 -08:00
Scott Shawcroft 2653455ded
Merge pull request #2321 from jepler/nrf-i2s-buglets
Nrf i2s buglets
2019-11-25 16:11:43 -08:00
Jeff Epler 1ee35fd6fd nrf: i2sout: move register settings closer together
.. just for consistency's sake
2019-11-25 11:43:51 -06:00
Jeff Epler 47a6eaa297 nrf: i2sout: Assign SWIDTH
The sample width register was never set, so all samples were played
as though they were 16 bit.

After this change, 8-bit samples no longer produce audio on the MAX 98357A
BOB, because only 16-, 24-, and 32-bit samples are supported by the
hardware.  This will be addressed by a future change to pad samples to
16 bits; see #2323 and the 98357A datasheet page 6.
2019-11-25 11:43:29 -06:00
Jeff Epler 8f4bab2d24 i2sout: Correctly retrieve channel_count
The meaning of the "single channel" parameter is not well-documented,
but in fact it seems that "true" must be passed or else the returned
channel_count is always 1.  This caused stereo samples to be played
incorrectly.
2019-11-25 10:59:59 -06:00
Dan Halbert d154d11911
Merge pull request #2320 from jepler/nrf-unsigned-audio-crash
nrf: i2sout: Fix double-increment when copying samples
2019-11-25 11:42:16 -05:00
Jeff Epler c9946dfd63 nrf: i2sout: Use <, not !=, for loop condition
This is good C style, h/t @danh
2019-11-25 09:35:57 -06:00
Jeff Epler 19d122e546 nrf: i2sout: Fix double-increment when copying samples
This caused two problems when playing unsigned samples:
 * When an even number of samples were present, it "worked" but only
   every other sample was copied into the output, changing the waveform
 * When an odd number of samples were present, the copy continued beyond
   the end of the buffers and caused a hard fault
2019-11-25 09:07:20 -06:00
Dan Halbert 1ccb7b4c5e cosmetic commit, mostly to re-run 2019-11-22 16:30:10 -05:00
Dan Halbert 13375d16f1 change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
Jeff Epler 77b78d7fb9 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-22 14:28:51 -06:00
Jeff Epler 1c6c9a3e1f nrf: i2sout: Ensure hardware I2S is stopped at deinit
.. otherwise, it may be possible under some scenario, for the background
task to continue and overwrite unrelated memory.
2019-11-22 14:15:07 -06:00
Jeff Epler aabb56c840 nrf: i2sout: Only update hold_value when appropriate
If we put no samples into the buffer, then there is no last
sample to fill out hold_value with.  (and, in fact, the expression such
as *(uint32_t*)(buffer-4) is outside an allocated region)

Detect this condition, and leave the prior value in place.

This improves clicks heard when pausing and resuming a waveform.
2019-11-22 13:54:37 -06:00
Scott Shawcroft 743bc829ab
Clean up debug changes 2019-11-21 16:39:57 -08:00
Scott Shawcroft e63796c7bc
Special exception message for when pairing prompt is ignored. 2019-11-21 16:32:42 -08:00
Scott Shawcroft 39f4046f70
Fix pairing when peripheral. Central untested. 2019-11-21 16:32:42 -08:00
Scott Shawcroft 5e857fdb67
Use BluetoothError in _bleio
This better differentiates errors than using OSError everywhere.
2019-11-20 14:02:15 -08:00
Scott Shawcroft 11c2c3443f
Add support for extended (>31 byte) BLE advertisements. 2019-11-19 13:55:58 -08:00
Jeff Epler 7f744a2369 Supervisor: move most of systick to the supervisor
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports.  This mostly would
have broken gamepad tick support on non-samd ports.

The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read.  Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).

Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.

Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
Hierophect 81223c76bd revert error 2019-11-15 13:04:25 -05:00
Hierophect 2c6781f74d move neopixel_in_use flag to shared-bindings 2019-11-15 12:59:52 -05:00
Hierophect de5691acf5 Add never_reset and reset to pin common hal, adjust files 2019-11-15 12:47:00 -05:00
Joe Bakalor ba83a4a2ac
Merge pull request #1 from adafruit/master
Update base
2019-11-05 11:06:18 -05:00
JoeBakalor 8ab3ef44dd add bluebird template files 2019-11-05 10:52:25 -05:00
Dan Halbert 8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
Refine _bleio
2019-11-04 22:27:54 -05:00
Dan Halbert e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
Dan Halbert 85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
jepler 2bdccf03a7 cpb: define the SPEAKER_ENABLE_PIN
This allows the board to disable the onboard speaker until explicitly
enabled in user code.

Testing performed on a CPB:
 * Touching the AUDIO pin with a fingertip no longer generates noise/buzz
 * Generating a waveform with `simpleio.tone` produces no sound by default
 * When the board.SPEAKER_ENABLE is configured as a digital output and
   set True, `simpleio.tone` does produce sound

Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to

    speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
    speaker_enable.direction = digitalio.Direction.OUTPUT
    speaker_enable.value = True

before using the internal speaker.

Closes: #2258
2019-11-01 16:26:03 -05:00
jepler fe47eba97f nRF: Handle SPEAKER_ENABLE_PIN
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
2019-11-01 16:23:35 -05:00
Scott Shawcroft 47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks 2019-11-01 13:20:58 -07:00
Dan Halbert e35eb08f1d nrf: allocate two I2C on CPB 2019-10-28 21:08:53 -04:00
Dan Halbert 358920db0e Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only 2019-10-28 10:40:10 -04:00
Jeff Epler 1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
Dan Halbert 76817eaa10 Merge remote-tracking branch 'adafruit/master' into nano-33-ble 2019-10-25 22:41:26 -04:00
Dan Halbert ab6fd34828 add object types to rgb status objects;mark spi rgb objects as never_reset 2019-10-25 22:32:43 -04:00
Dan Halbert 7d04d9109e use bitbang SPI for DotStar; still need to fix hw SPI for dotstar 2019-10-25 15:37:27 -04:00
Dan Halbert cdeb0857a9 Initial Itsy nRF52840 defn 2019-10-25 11:15:34 -04:00
Scott Shawcroft 91c9d519ae
Refine comments and switch prefix_len to size_t 2019-10-22 23:09:56 -07:00
Scott Shawcroft ae30a1e5aa
Refine _bleio
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.

It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.

Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.

Relates to #586
2019-10-21 18:57:03 -07:00
Dan Halbert 7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Kamil Tomaszewski 96756b3945 Add functions to get top and limit stack 2019-10-18 11:04:45 +02:00
Dan Halbert be8136dc6d Merge remote-tracking branch 'adafruit/master' into bonding1 2019-10-15 15:55:21 -04:00
Dan Halbert eca73436c9 Merge remote-tracking branch 'adafruit/master' into cpu-voltage 2019-10-15 09:03:24 -04:00
Dan Halbert fdd7ebef2d change calibration from analogin_reset() to analogin_init() 2019-10-14 23:38:41 -04:00
Dan Halbert c1ab2486f9 return chip vcc value 2019-10-12 15:42:15 -04:00
Jeff Epler fae6e29546 nrf: PWMAudioOut: deactivate PWM when deinitting self
.. otherwise, when an AudioPWMOut object was deinitted without being
explicitly stop()ped, it would use up a slot in active_audio[]; the
5th iteration would create a non-working audio object which would just
buzz instead of playing the right thing.

Closes: #2203
2019-10-12 14:01:35 +09:00
Jeff Epler ef459326cb nrf: PWMAudioOut: coding style 2019-10-12 13:57:31 +09:00
Dan Halbert fc19e03128 WIP: bonding 2019-10-06 21:30:26 -04:00
Dan Halbert aa1eed3bd3 initial Arduino Nano 33 BLE board definition 2019-09-26 15:28:57 -04:00
Scott Shawcroft 19c6c96929
Merge pull request #2130 from jepler/nrf-debugflags
nrf: Makefile: sensible flags for debugging
2019-09-20 10:18:00 -07:00
Scott Shawcroft b5a9ed3688
Merge pull request #2161 from jepler/nrf-analog-reference
nRF: Change analog reference voltage
2019-09-17 09:41:52 -07:00
jepler d39c85e3f5 nRF: Change analog reference to VCC(/4)
@ladyada says:
"having this be adjustable (reference) would be ideal cause you can get
absolute voltages but for now, VCC/4 + 4x matches every other chip :)"

... and indeed doing it this way happens to give a much more steady
reading when using a VCC-referenced resistance, and so many of the simple
things you'd wire up are actually VCC-referenced anyway.
2019-09-16 21:43:07 -05:00
Jeff Epler c56186da8c nRF: Change analog reference voltage
Datasheet reading explains one reason why readings might have been 10% low.
2019-09-16 18:35:48 -05:00
jepler df48312ce7 nRF: PWMOut: At deinit, make pin available again
Closes: #2146
2019-09-11 20:09:38 -05:00
jepler 7b9dfc9952 nrf: i2s: tune audio buffering
.. based on some tasks I found that caused stuttering:

 # Test SD and printing
 while True: os.listdir('.')

 # Test bulk I/O
 while True: len(open('somefile.wav', 'rb').read())

Each of these tasks *WAS* worse and I am improving them in a separate
PR by adding RUN_BACKGROUND_TASKS to them.
2019-09-09 20:13:12 -05:00
jepler c66f5a8536 nrf: i2s: rewrite without 'goto' 2019-09-09 19:26:18 -05:00
jepler fe9605a6a3 nrf: i2s: Comment this slightly tricksy code 2019-09-09 19:25:52 -05:00
jepler ccf08aa3df nrf: I2SOut: deal more gracefully with errors from the sample 2019-09-08 21:59:07 -05:00
jepler e890bc8efe nrf: Makefile: sensible flags for debugging
This enables the highest level of debug symbols, and all optimizations
except lto that do NOT interfere with debugging, in the view of the gcc
maintainers.
2019-09-08 21:07:00 -05:00
jepler f38ee42874 nrf: Add i2s audio output
Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC.
I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal
bit rates.  With this setup, all the 11025Hz samples sound good.
I tested play, pause,  and loop functionality.

During some runs with 22050Hz samples, there were glitches.  However,
these may have only occurred during runs where I had set breakpoints
and watchpoints in gdb.

I also tested with a MAX98357A I2S amplifier.  On this device, everything
sounded "scratchy".  I was powering it from 5V and the 5V rail seemed
steady, so I don't have an explanation for this.  However, I haven't
tried it with a SAMD board.
2019-09-08 16:46:35 -05:00
Dan Halbert 3c22c690c8 CPB A1 pin mapping wrong; remove A7 2019-09-06 14:17:11 -04:00
sommersoft b1c3d47413 Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice 2019-09-01 21:16:12 -05:00
sommersoft 8120f5cdad Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice 2019-08-29 22:14:53 -05:00
Dan Halbert 7a64af9280 rename bleio module to _bleio 2019-08-29 18:44:27 -04:00
Dan Halbert b11b7916fd address minor issues: typos, make translate, and sphinx 2019-08-29 17:58:21 -04:00
Dan Halbert f17059b10b another API rework: less abstraction leakage 2019-08-28 23:15:22 -04:00
Dan Halbert 19c59b41ed bleio: API change to create and connect related objects simulatenously: no orphan bleio objects 2019-08-28 16:15:09 -04:00
Dan Halbert a72bcab0fd Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp 2019-08-28 16:09:18 -04:00
Dan Halbert 0364f1dc85 remove some debugging prints 2019-08-26 08:17:59 -04:00
Dan Halbert 76446f634b BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding 2019-08-25 21:38:13 -04:00
sommersoft 2e4b687ba5 enable audiomixer on nrf 2019-08-25 07:32:48 -05:00
Scott Shawcroft 7324b70a7c
Rework based on Dan's review 2019-08-23 15:27:21 -07:00
Scott Shawcroft 2497cbe186
Fix nrf builds 2019-08-22 14:23:33 -07:00
Scott Shawcroft 36a23e0fe3
Rework refresh API and factor common display stuff out
NOT TESTED! Just compiles

Fixes #1691
2019-08-22 14:23:27 -07:00
Scott Shawcroft c247e7df9c
Begin refresh rework. 2019-08-22 14:08:33 -07:00
Benny Meisels d37dd4d758
Updated ParallelBus implementation in nrf port 2019-08-22 14:08:33 -07:00
Dan Halbert 7cc15e56c8 make translate 2019-08-22 15:20:23 -04:00
Dan Halbert 0b7291d767 fix default crystal value; fix include order 2019-08-22 09:01:05 -04:00
Dan Halbert acc6df4959 merge similar fix in 2019-08-22 01:29:34 -04:00
Dan Halbert d94023e9b3 Fix CPBlue LFCLKSRC; CPB has no status neopixel 2019-08-22 01:04:00 -04:00
Scott Shawcroft 389e7cc35d
Merge pull request #2072 from bmeisels/nrf-no-crystal-support
Add support for nrf boards that don't have an external crystal
2019-08-21 13:01:26 -07:00
Benny Meisels fe2ec6c887 Add support for nrf boards that don't have an external crystal 2019-08-20 23:30:21 +03:00
Dan Halbert e00696de7f merge from upstream and make translate 2019-08-20 13:06:23 -04:00