42195a4a29
Added M5Stack Atom Matrix board
2022-12-30 17:37:37 +00:00
ed5d9ac448
Merge pull request #7392 from chukwon/main
...
Update pins.c for lolin_c3_mini
2022-12-30 00:08:39 -05:00
e8ee4b220e
Merge pull request #7398 from dhalbert/cache-memory-fence
...
Use memory fence when disabling cache to avoid -O2 problems
2022-12-30 00:08:24 -05:00
cc92ce4820
Use memory fence when disabling cache to avoid -O2 problems
2022-12-29 19:49:40 -05:00
70b838a42d
Merge pull request #7395 from jepler/fix-getenv_int-dos-newlines
...
Fix getenv_int handling of "dos-style" newlines
2022-12-28 18:32:38 -05:00
83bbfd1815
Allow the tests to directly call the non-heap using _int and _str variants
...
.. of getenv. These can have their own special bugs.
2022-12-28 12:36:58 -06:00
a932fb3fb1
Update pins.c
...
also match lolin_c3_mini pins definition of new version
2022-12-28 21:25:25 +08:00
7a40d449e6
mimxrt10xx/common-hal/UART.C: Fix for bits parameter validation.
...
I believe this will resolve issue #7389
2022-12-27 22:07:54 -05:00
2b8aa9caae
Merge branch 'adafruit:main' into main
2022-12-27 00:33:47 +01:00
928fb0a9c4
Make the "name or service not known" message translatable
2022-12-26 13:58:31 -06:00
cdefd2e674
Add nullbits Bit-C PRO board
2022-12-25 15:21:32 +00:00
0d3b7770d1
Merge pull request #7378 from DavePutz/issue_7325
...
Issue 7352 - set max value of a pulsein
2022-12-24 19:16:44 -05:00
88d0eba7f4
Merge pull request #7258 from m1cha1s/ESP32DevKitV1
...
Esp32 dev kit v1
2022-12-24 09:12:45 -05:00
94dbefacf1
Issue 7352 - set max value of a pulsein
2022-12-23 19:17:45 -06:00
4bd5316929
Merge branch 'adafruit:main' into main
2022-12-22 21:28:34 +01:00
7cfdd24f77
Change flash mode to dio
2022-12-22 09:30:52 +09:00
e80ff20583
Remove IO11 from definition
...
It is used internally on this particular board version despite being broken out to a pin and marked on silkscreen.
2022-12-22 09:29:24 +09:00
9f266c361b
Initializing external flash SPI speed to SPI_FLASH_MAX_BAUDRATE, instead of using driver default speed (32MHz), before probing JEDEC identifier.
2022-12-21 16:33:06 +01:00
2a1bb72797
Merge pull request #7359 from tannewt/rework_coproc_api
...
Rework the coproc API
2022-12-20 20:42:53 -05:00
c16b42e972
Tweak arg checking and comments
2022-12-20 11:00:13 -05:00
e9f032f468
Merge pull request #7364 from jepler/fix-unix-standard-build
...
fix ports/unix builds besides coverage
2022-12-20 06:54:52 -08:00
aa63fae0ae
fix ports/unix builds besides coverage
2022-12-20 07:27:26 -06:00
b36d603cf3
add GP25 as status LED on the Raspberry Pi Pico
2022-12-19 22:11:30 +01:00
0498b1d2ae
Fix indent
2022-12-19 15:51:34 -05:00
674f0402a9
Fix ESP32 builds
2022-12-19 15:30:03 -05:00
f8ac1d9261
Rework the coproc API
...
It is now a generic `memorymap` API and an ESP specific `espulp` module.
Fixes #7218 . Fixes #3234 . Fixes #7300 .
2022-12-19 14:08:38 -05:00
aac324c4d1
added frozen modules, changed to 8BM FLASH
2022-12-18 22:49:28 +00:00
77a98e6107
Merge pull request #7355 from pypewpew/esp32-camera-xclk
...
esp32-camera: make the master_clock_pin really optional
2022-12-17 21:15:31 -05:00
90c805d858
esp32-camera: make the master_clock_pin really optional
...
The master_clock_pin was already optional, but not specifying it would
result in a crash. This fixes it, so it really can be omitted, when the
camera module has its own clock source built in.
2022-12-16 21:53:50 +01:00
66efed5ba5
fix AuthMode printing regression
2022-12-15 15:49:58 -05:00
c6ea3e803a
Merge pull request #7345 from dhalbert/mimx-fix-build
...
redo pin never resetting for mimxrt10xx
2022-12-15 12:21:21 -08:00
b90a6413c2
refactor to reduce duplicate code
2022-12-15 13:17:28 -05:00
5c569f03c2
redo pin never resetting for mimxrt10xx
2022-12-14 19:34:26 -05:00
297657ea9a
Refactor so that all sites of name lookup failure result in gaierror
2022-12-14 14:45:32 -06:00
398b7c26ca
Merge pull request #7321 from jepler/dotenv-becomes-toml
...
Dotenv becomes toml
2022-12-13 19:56:36 -05:00
369507e1da
cxd56 was not using SRC_SHARED_MODULE_INTERNAL
2022-12-13 18:39:25 -05:00
56d4f8f552
can't use object-based calls at this time
2022-12-13 11:32:33 -06:00
d49af4d784
make wording a bit clearer
2022-12-13 08:11:47 -06:00
aa5b1e063f
Added new RP2040 board with integrated SD/Card reader and RTC
2022-12-13 13:34:28 +01:00
adff93c61a
Mark cyw43 pins "never reset" before reset_port
...
reset_port calls reset_all_pins, which disables the built-in pull
down. In theory, this could allow some CYW43 interfacing pin to float
to an inappropriate value. There's no proof of this! but the move can't
really hurt, either
2022-12-12 20:14:08 -06:00
90894014a2
Use the HW LED as status indicator
...
For me this made a rare startup failure stop, which is nonsense.
2022-12-12 19:43:10 -06:00
31fd7cb51b
Merge remote-tracking branch 'origin/main' into dotenv-becomes-toml
2022-12-11 11:06:51 -06:00
66eca9c35e
Updated formatting.
2022-12-11 17:25:26 +01:00
f7e735b492
Added LDO control pin, new flash variants and support functions for the LDO control pin.
2022-12-11 17:11:24 +01:00
9ef5b7d118
Merge branch 'main' of https://github.com/PontusO/circuitpython
2022-12-11 13:02:03 +01:00
da413094f8
Added LDO control pin and initial setup
2022-12-11 13:01:00 +01:00
2bf5d2bc07
Merge remote-tracking branch 'origin/main' into dotenv-becomes-toml
2022-12-10 15:39:50 -06:00
dd6dd5df21
rework the getenv test again
...
* use a virtual fat filesystem during the test
* this makes the file I/O part more closely patch runtime which is nice
* side-steps the need to add a special function for testing
* but test still can't be run on a device, because the vfs calls
are incompatible, and you intentionally can't remount "/" anyway
* and side-steps problems with storing 'bad' toml files
2022-12-10 12:58:08 -06:00
3ab71d7448
Rename test function, make 'bad' files binary & add another test
2022-12-09 15:23:56 -06:00
6dca9db225
Rename test function & fix a bug with default value handling
2022-12-09 14:35:50 -06:00
1f504e5c0f
Remove line accidentally duplicated
2022-12-09 14:15:00 -06:00
44f15d563d
Rename "environ" errors to "getenv" errors
2022-12-09 14:14:53 -06:00
678a466d1a
alphabetize
2022-12-09 14:12:43 -06:00
3a92c079fc
Finish renaming os_environ_get_key to os_getenv
...
.. for consistency.
2022-12-09 14:07:23 -06:00
3cb628d290
fix nrf build
2022-12-08 16:45:58 -06:00
4fa0c4d108
Merge pull request #7320 from dhalbert/seeed-xiao-nrf52840-charge-rate-pin
...
Add pin for charge rate for Seeed XIAO nRF52840 Sense
2022-12-08 16:51:26 -05:00
3459fe322b
Withdraw the _environ module
...
This existed solely for testing, so expose it a different way during
the unix coverage build
Also turn off os.getenv support on samd21.
2022-12-08 15:33:10 -06:00
243ecc2502
remove debugging prints
2022-12-08 14:18:22 -06:00
170918995c
fix mistaken code formatting
...
I wanted to use the idiom
```c
#if GUARD
if (condition) {
alternate code
} else
#else
{
common default code
}
```
idiom, in which the common default code is conditioned both on a
compile-time check and a run-time check. However, I got it wrong
and uncrustify chipped in, adding extra brackets around a following
piece of code and re-indenting it.
2022-12-08 14:16:53 -06:00
4e7d65251f
Add pin for charge rate for Seeed XIAO nRF52840 Sense
2022-12-08 14:09:44 -05:00
1fe05cb8cd
pico w: re-use previous connection if ssid matches
2022-12-08 12:44:34 -06:00
ef2bfdb5db
dotenv becomes settings.toml
2022-12-08 12:44:20 -06:00
68d510cb2f
Update mpconfigboard.h
...
Configure LED pin for STATUS display and to prevent ESP floating pins from constantly lighting led dimly.
2022-12-07 23:00:09 -05:00
295f7b490f
Merge pull request #7313 from jepler/cyw43-additional-delay
...
Add an additional large delay time at start for pico w boards
2022-12-07 19:17:45 -05:00
44af05283a
Merge pull request #7291 from jepler/issue6502
...
Ensure orderly shutdown of ssl socket
2022-12-07 19:12:12 -05:00
2326b49b24
switch this header to 'pragma once' since I'm touching it already
2022-12-07 15:14:54 -06:00
a1dd8405f4
use a more standard method of forward-declaring the structure
2022-12-07 15:14:30 -06:00
ff8d051eff
Add an additional large delay time at start for pico w boards
2022-12-07 15:10:13 -06:00
676e40d62f
Merge pull request #7311 from dhalbert/esp32-box-lite-sdkconfig
...
make esp32-box-lite sdkconfig same as box
2022-12-06 21:31:45 -05:00
3965ef9c2a
make esp32-box-lite sdkconfig same as box
2022-12-06 19:27:00 -05:00
b354cec8cb
Three small ESP web workflow fixes
...
* Set nonblock on all accepted sockets. Not just ones for user code.
* Close an open websocket if another is accepted.
* Set debug level to INFO rather than DEBUG because DEBUG crashes
on ESP32-S3 USB OTG.
2022-12-06 11:49:04 -08:00
ac239c0fb3
Merge pull request #7306 from evildave666/add-luatos-core-esp32c3
...
Add Luatos Core ESP32C3 Board
2022-12-05 13:27:08 -08:00
d7874e65c2
Merge pull request #7299 from BooleanMattock/main
...
Fix to Issue #7224 - Servo update slow due to PWM channel duty cycle update busy-wait
2022-12-05 12:54:41 -08:00
eaf39b4c10
Update pins.c
2022-12-05 16:40:36 +09:00
14b430ed35
Fix pre-commit issues
2022-12-05 16:35:48 +09:00
5b6f06d84c
Add additional files
2022-12-05 16:08:12 +09:00
05a8bf8c38
Create board.c
2022-12-05 16:06:50 +09:00
afb5301cef
Fix to Issue #7224 - tested
2022-12-02 20:21:40 -05:00
4c064c263e
Merge pull request #7294 from tannewt/analogbufio_rework
...
Rework the analogbufio API.
2022-12-02 14:53:16 -08:00
f7504ff857
Tweaks based on review comments
2022-12-02 10:19:31 -08:00
6e40949f6e
Merge pull request #7295 from tannewt/fix_mdns_conflict
...
Fix MDNS hostname mangling
2022-12-02 11:13:07 -05:00
b5dda0b770
Removed esp32_devkit_v1 folder
2022-12-02 14:26:46 +01:00
ddc56f5fdf
Merge pull request #7101 from bill88t/picow-ap
...
Attempt at pi cow ap
2022-12-01 19:55:17 -06:00
ded0ee4816
Fix MDNS hostname mangling
...
cpy-MAC hostnames were being mangled on circuitpython.local
conflicts.
Fixes #6869
2022-12-01 17:54:41 -08:00
255e997345
Rework the analogbufio API.
...
* read() is now readinto() and takes the buffer to write into.
* readinto() returns the number of valid samples.
* readinto() can be interrupted by ctrl-c.
* readinto() API doesn't support signed numbers because it never did.
* sample_rate is now required in the constructor because supported
values will vary per-port.
* 16 bit values are full range. 12 bit samples from RP2040 are stretched
in the same way they are for AnalogIn.
Fixes #7226
2022-12-01 17:46:07 -08:00
7583ccad2a
Ensure orderly shutdown of ssl socket
...
A crash would occur if an SSL socket was not shut down before
`gc_deinit()`.
I do not fully understand the root cause, but some object deinitialization
/ deallocation prior to `gc_deinit` leaves the SSL object in an
inconsistent state.
Rather than resolve the root cause, instead ensure that the closing of
the user socket also closes the SSL socket.
Closes : #6502
2022-12-01 19:29:20 -06:00
082b0d1aed
Merge pull request #7191 from jepler/fastpixelmap
...
Add a fast PixelMap-like class
2022-12-01 11:43:00 -05:00
b41f7460b7
Merge pull request #7181 from jepler/more-string-qstr-savings
...
More space savings
2022-11-30 21:36:07 -05:00
3fb4fd81e9
Revert "debug_dhcp to follow general debug"
2022-11-30 22:44:18 +02:00
ed33f65fd9
move define to proper place
2022-11-30 14:39:52 -06:00
c46e219795
Having an input-only pin is rare, save a string on other ports
2022-11-30 14:39:49 -06:00
0738d50834
debug_dhcp to follow general debug
2022-11-30 22:24:21 +02:00
845b68c351
Merge pull request #7204 from jepler/build-python3x
...
return to using python 3.x for builds
2022-11-30 15:18:29 -05:00
f8070d2141
Change comment, and logic on dhcpserver
2022-11-30 21:51:50 +02:00
d904d8e9a0
Renamed the board folder to doit_esp32_devkit_v1
2022-11-30 20:26:41 +01:00
beb053a94d
more thoroughly disable UART when
2022-11-30 12:06:19 -06:00
e489b73d88
update esp-idf to merge commit
2022-11-30 12:04:47 -06:00
44d5326d4c
fix picow-ap
2022-11-30 19:36:00 +02:00
362018dcca
Merge branch 'main' into picow-ap
2022-11-30 19:11:03 +02:00
2f5ec1cab0
Merge pull request #7281 from jepler/esp32-trailing-dot
...
handle domain with trailing dot
2022-11-30 11:18:47 -05:00
c8390a7918
Merge pull request #7069 from jepler/exception-chain
...
Implement chained exceptions
2022-11-30 11:13:57 -05:00
286efc18fc
handle domain with trailing dot
...
Closes : #7032
2022-11-30 09:29:21 -06:00
a8c70aa7bd
Fix S3 deep sleep
...
Adding `-u ld_include_highint_hdl` forces the linker to keep the
high priority interrupt handler that calls the ipc_isr handler.
The deep sleep is waiting for this interrupt to be handled on core
0 before sleeping from core 1.
Fixes #6090
2022-11-29 17:20:38 -08:00
49ac82564c
Merge pull request #7278 from jepler/sdcardio-failures
...
Sdcardio failures
2022-11-29 15:13:53 -06:00
4af95f1cb1
atmel-samd: Ensure sdioio.SDCard pins are released
2022-11-29 13:45:18 -06:00
8e83f36c36
SAM E54 Xplained devkit hardfaults at start with -O2
...
I don't know why, but other samd5x are using -Os too, see the block above.
Closes : #7277
2022-11-29 13:05:39 -06:00
c13ca95da1
Add MDNS support to Pico W
...
This adds both cpy-MAC.local and circuitpython.local support.
Fixes #7214
2022-11-28 16:15:28 -08:00
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
...
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
680e56c52a
Changed creator id
2022-11-25 14:09:35 +01:00
26fbb25653
Fixed formatting
2022-11-25 13:55:06 +01:00
fb46e7c4d8
Defined esp32 board for the esp32 devkit v1
2022-11-25 12:13:44 +01:00
c6ca2bdd59
disable pixelmap on bluemicro833
2022-11-24 09:09:48 -06:00
79f4344860
fix playing mono files on stereo output
2022-11-23 22:11:41 -05:00
30563655d7
Merge pull request #7249 from dhalbert/wifi-connect-ap-api
...
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-23 10:29:05 -08:00
17be447c4b
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-22 17:11:03 -05:00
6d022733b3
Merge pull request #7162 from rhooper/boards-list
...
add boards list to make error message
2022-11-21 23:18:37 -05:00
19f1119994
Merge branch 'main' into fastpixelmap
...
# Conflicts:
# shared-module/adafruit_pixelbuf/PixelBuf.c
2022-11-21 20:25:58 -06:00
c3a96a63c0
Enable* web workflow for Pico W
...
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.
Progress on #7214
2022-11-21 16:24:05 -08:00
b40facd0b4
Error msg changes
2022-11-22 01:00:34 +02:00
df0150ff0e
Add common settings to sdkconfig-esp32c3.defaults
2022-11-21 15:15:26 -05:00
85a83b8150
Simplify some ESP32-C3 board sdkconfig files
2022-11-21 12:35:10 -05:00
d4834cb7ec
Merge pull request #7234 from jepler/espressif-uart-console-break
...
Interrupt on UART 'break'
2022-11-19 14:46:18 -05:00
96fc85cd18
Merge pull request #7229 from dhalbert/rp2040-spi-mode-3
...
RP2040: have clock start high when SPI polarity high
2022-11-19 14:32:02 -05:00
4e0f8e7fcd
Interrupt on UART 'break'
...
Tested and working with the CH9102F USB converter on Adafruit's
Feather ESP32 V2 (& tio as the software on the host computer)
Closes : #7233
2022-11-19 10:57:21 -06:00
1611cf98da
have clock start high in SPI mode 3
2022-11-18 18:27:38 -05:00
88bd9ef6b8
just change the ap error
2022-11-18 22:51:05 +02:00
7c51201e88
fix nRF build directory naming
2022-11-19 00:23:03 +05:30
c3c1717813
refactor common port specific Makefile code
2022-11-18 23:00:28 +05:30
e2a3597263
add awesome new make error message
...
Copied from initial implementation on atmel-samd
Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
2022-11-18 11:27:23 +05:30
3a418379d3
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2022-11-18 09:40:20 +05:30
b8cd6c093f
picow-ap progress
2022-11-17 21:47:39 +02:00
f9f1edbb08
setup PWM status LED on aithinker ESP32-C3 boards
2022-11-17 20:32:50 +01:00
be53193dde
Merge pull request #7219 from tannewt/c3_pwm_in_use
...
Fix PWM status LED never_reset
2022-11-17 13:59:47 -05:00
a234b74e87
Merge branch 'adafruit:main' into picow-ap
2022-11-16 21:32:46 +02:00
6689b9ad09
Merge pull request #7208 from domdfcoding/weact_pico_16mb
...
Add support for the 16MB WeAct Studio Pico
2022-11-16 09:59:37 -08:00
a4bd7721e9
Merge pull request #7217 from dhalbert/samd21-tick-event
...
samd21: port_disable_tick() should disable event channel
2022-11-16 09:05:48 -08:00
b74893eb07
samd21: port_disable_tick() should disable event channel
2022-11-15 21:52:12 -05:00
12545fb060
Add prototype feather esp32s2/s3 reverse tft board definition
...
This is not final hardware and may change!
2022-11-15 20:22:20 -06:00
8e4e84c58b
Match channel number, not timer number
2022-11-15 16:51:47 -08:00
93ee54a2fb
Fix PWM status LED never_reset
...
It doesn't need never reset because the status LED is only active
when user code isn't.
This also fixes PWM never reset on espressif so that deinit will
undo it.
Fixes #6223
2022-11-15 16:14:31 -08:00
ef34378b1d
Merge pull request #7201 from jepler/rp2040-light-sleep
...
raspberrypi: Make port_idle_until_interrupt work
2022-11-15 17:25:48 -06:00
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug
...
Fix pi cow debug compilation
2022-11-15 14:08:44 -06:00
412df210ad
Merge remote-tracking branch 'origin/main' into build-python3x
2022-11-15 14:02:09 -06:00
b8a2d3ffdc
Merge pull request #7212 from dhalbert/stm-pwm-fix
...
STM: off-by-one TIMx reference; other code cleanup and minor fixes
2022-11-15 11:50:53 -08:00
11dcd69f2c
Merge pull request #7207 from jepler/nicer-pin-checking
...
shared-bindings: Get rid of CYW43 special cases in shared-bindings
2022-11-14 23:35:26 -05:00
6954e569b7
since it ain't leaving..
2022-11-15 00:05:01 +02:00
fde1c05e6d
Revert "remove lwip_src"
...
This reverts commit 398e9122a0
2022-11-14 20:03:41 +02:00
fdeaf805d3
STM: off-by-one TIMx reference; other code cleanup and minor fixes
2022-11-14 13:00:32 -05:00
398e9122a0
remove lwip_src
2022-11-14 19:33:06 +02:00
6ad61a3fd1
Radio.c work
2022-11-14 19:31:18 +02:00
14b20087b5
only ignore sdkconfig* files in the espressif port's top directory
...
danh and microdev1 noticed that this ignore pattern was over-broad
and caused added sdkconfig files in boards/ (which should be committed)
to be ignored and not proposed for addition by common tools like
git status, git gui, etc.
This pattern anchors the search so that it only matches in the
ports/espressif directory, so ports/espressif/sdkconfig is ignored
but ports/espressif/boards/example/sdkconfig is not ignored anymore
2022-11-14 11:29:18 -06:00
2e6dd1bf1f
Radio.c no longer needs ping.h
2022-11-14 18:36:42 +02:00
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings
...
.. by moving it into a new weak function that can be replaced
just by the picow build.
2022-11-14 08:44:08 -06:00
e1046b1050
Add support for the 16MB WeAct Studio Pico
2022-11-14 14:04:07 +00:00
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor
...
Add ability to read VOLTAGE_MONITOR on Pico W
2022-11-13 22:40:54 -05:00
f3169246ba
Implement chained exceptions
...
This adds the __cause__, __context__ and __suppress_context__
members to exception objects and makes e.g., `raise exc from cause`
set them in the same way as standard Python.
2022-11-13 19:52:50 -06:00
b8f5def985
return to using python 3.x for builds
2022-11-13 09:26:49 -06:00
6e9909c65e
Merge pull request #7198 from CRCibernetica/crcibernetica-ideaboard
...
Add new board crcibernetica-ideaboard
2022-11-13 09:12:43 -05:00
43566dec5b
allow inclusion of board while blocking build files
2022-11-13 12:13:32 +00:00
c96208902f
Merge pull request #7199 from MicroDev1/espressif
...
Enable `microcontroller.cpu.temperature` on esp32s3
2022-11-12 11:16:45 -05:00
e4d620f055
make whitespace match
2022-11-12 09:17:52 -06:00
78fc43baab
raspberrypi: Make port_idle_until_interrupt work
...
This needs thorough testing before it's merged, as we tried
and reverted this once before (#5341 and #5356 ).
I think that besides checking for tinyusb having "something to do",
the fact that `port_interrupt_after_ticks` and `port_disable_tick`
weren't implemented that was causing a secondary problem.
I've tested this on a pico w over reboot-cycles and ctrl-c-cycles,
with and without drive automounting, with and without serial repl open,
and on a power-only connection.
I didn't notice the problem reported in #5356 after merely implementing
port_idle_until_interrupt; but I did notice that sleeps in general would
take over-long until "something" (like writing to the USB drive) happened;
I think "something" was probably calling port_enable_tick(). When this
problem was happening, sleeps would take a lot longer; for instance,
`sleep(.001)` would take about 1/20s and `sleep(.1)` would take about 1/7s.
2022-11-12 09:16:41 -06:00
9e94d7e758
Merge pull request #7196 from dhalbert/rp2-pin-alarm-race
...
RP2040: ignore pin changes before deep sleep
2022-11-12 09:36:15 -05:00
512cda8b73
enable `microcontroller.cpu.temperature` on esp32s3
2022-11-12 10:03:00 +05:30
6c3b9b64da
add crcibernetica-ideaboard
2022-11-12 03:22:15 +00:00
983502d6e3
ignore pin changes before sleep
2022-11-11 15:31:49 -05:00
f5c637dc10
Add adafruit_pixelmap.PixelMap
...
.. a fast helper for animations. It is similar to and inspired by the
PixelMap helper in Adafruit LED Animation library, but with an extremely
fast 'paste' method for setting a series of pixels. This is a common
operation for many animations, and can give a substantial speed improvement.
It's named `adafruit_pixelmap` so that we can package a compatible version
in pure Python for systems that can't fit it in C in flash, or for
Blinka.
This is a proof of concept and can make a very fast comet animation:
```python
import time
import adafruit_pixelbuf
import adafruti_pixelmap
import board
import neopixel
from supervisor import ticks_ms
from adafruit_led_animation.animation.solid import Solid
from adafruit_led_animation import color
pixel_pin = board.GP0
pixel_num = 96
pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB")
evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2)))
odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4))
print(odd_indices)
odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices)
assert len(odds) == len(odd_indices)
comet_length = 16
comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4)
for i in range(comet_length)]
comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4)
for i in range(comet_length)]
pos1 = 0
pos2 = 96//4
while True:
evens.paste(comet1, pos1, wrap=True, reverse=False, others=0)
pos1 = (pos1 + 1) % len(evens)
odds.paste(comet2, pos2, wrap=True, reverse=True, others=0)
pos2 = (pos2 - 1) % len(odds)
pixels.show()
m = ticks_ms()
if m % 2000 > 1000:
time.sleep(.02)
```
2022-11-11 07:54:33 -06:00
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c
...
u32_t -> uint32_t
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-11-11 14:40:47 +02:00
0bf9df232a
fix debug
2022-11-11 14:17:57 +02:00
a37c36c383
Merge branch 'adafruit:main' into main
2022-11-10 21:47:23 +01:00
11f1174658
picow: Change init to use country code routine.....place holder for future improvements to allow country code setting.
2022-11-10 17:24:09 +02:00
851c2cd8cb
picow: Add channel setting when starting AP
2022-11-10 17:23:59 +02:00
8fdb2df0bf
picow: enable dhcpserver for apmode.
2022-11-10 17:23:38 +02:00
25c0a0aca9
Merge branch 'adafruit:main' into picow-ap
2022-11-10 17:04:21 +02:00
d90bc1760f
Merge pull request #7188 from kylemccreery/pillbug
...
Add new board PillBug
2022-11-10 09:10:40 -05:00
1f332e7007
Adding pillbug initial commit
2022-11-09 23:15:38 -05:00
e6936decac
Merge pull request #7169 from blues/pdmin
...
STM32L4 PDMIn support
2022-11-09 14:19:51 -05:00
11ce074318
Update mpconfigboard.mk
2022-11-08 23:43:13 +01:00
97f693d2d8
docs(swan_r5): updated copyright notices
2022-11-08 14:18:54 -08:00
843d6b42f9
formatting(swan_r5): lexicographically sorted the board module names in the swan_r5 makefile include [ci-skip][skip-ci]. Skip CI since this is a cosmetic change only.
2022-11-08 12:04:30 -08:00
7f36a365cf
delay 100us for analog voltage to stabilize
...
.. otherwise, depending on the prior state of the pin as a digital
input, the value read could be 20% low.
2022-11-08 10:43:14 -06:00
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W
...
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.
Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.
Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.
```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```
Closes : #7020
2022-11-08 09:37:15 -06:00
28e4834da8
Merge branch 'adafruit:main' into main
2022-11-08 01:02:46 +01:00
a568a5c2e2
Rename sdkonfig to sdkconfig
2022-11-06 22:14:19 +01:00
f1e658f8bb
Update sdkonfig
2022-11-06 22:07:12 +01:00
452ebe27ae
socketpool: make socket objects selectable
...
.. which will lead to them being usable in async contexts, pending
relevant changes in asyncio
2022-11-05 12:05:19 -05:00
ad9db01f5f
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 17:27:08 -07:00
f3ec46bbb5
Add missing pin definitions for 42. Keebs Frood
2022-11-04 15:33:16 +01:00
882100a87a
Create sdkonfig
2022-11-02 22:10:44 +01:00
71b5e6088b
Update mpconfigboard.mk
2022-11-02 22:07:28 +01:00
d6fe378456
Update mpconfigboard.h
2022-11-02 22:05:39 +01:00
403a5b2681
Merge pull request #7126 from jepler/scorpio
...
add feather rp2040 scorpio
2022-11-02 14:47:40 -05:00
8933f93439
simplify and use columns for boardlist
2022-11-01 11:00:48 -04:00
36c4cc7d30
fix output layout of board list
2022-11-01 00:18:46 -04:00
dec128f508
add boards list to make error message
2022-10-31 23:57:59 -04:00
9b1181804c
Merge branch 'adafruit:main' into main
2022-10-30 19:16:05 +01:00
468709abcc
Update pins.c
...
Hopefully last change nefore merge.
2022-10-30 18:51:46 +01:00
952812cdea
Merge pull request #7154 from dhalbert/alarm-lifetime
...
Save wake alarm info in static storage, simplifying recording of alarm
2022-10-30 12:28:50 -04:00
ae8f415bd5
Update board.c
2022-10-30 02:17:38 +02:00
0aa41fa92e
change BOARD_USER_SAFE_MODE_ACTION into a separate sentence
2022-10-30 01:55:42 +02:00
934d2a7004
remove duplicate press boot button, it's already the default
2022-10-30 01:52:17 +02:00
5d7c58da5d
Update pins.c
...
Attempt to fix build issue
2022-10-30 01:52:09 +02:00
ded134c346
store wake_alarm in a static object
2022-10-29 16:26:36 -04:00
992e97d84b
fix: pre-commit
2022-10-29 20:00:37 +01:00
9ca057385a
feat: Add support for Waveshare RP2040-LCD-1.28
2022-10-29 18:52:43 +01:00
a064b52ad7
CIRCUITPY_ESP32_CAMERA, not CIRCUITPY_USB_CAMERA
2022-10-29 10:13:11 -04:00
2ffd16a10c
Update mpconfigboard.mk
2022-10-29 09:27:09 -04:00
19fd9107a2
Merded with main branch
2022-10-29 07:46:54 +00:00
7282bd9c9a
Removed boilerplate already handled by MP_WEAK definitions
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-10-29 09:34:45 +02:00
053d0fa8b5
Merge pull request #7145 from chukwon/fix_lolin_s3
...
fix and add lolin_s3 pins definition
2022-10-28 23:50:53 -04:00
d95a085be4
Merge pull request #7144 from CDarius/add_m5stack_core_safe_mode
...
Added safe mode button and fix coyright attribution
2022-10-28 15:59:59 -04:00
0221cc8df7
Merge remote-tracking branch 'adafruit/main' into alarm-lifetime
2022-10-28 14:11:32 -04:00
9c66320474
fix and add lolin_s3 pins definition
2022-10-28 21:40:35 +08:00
4e20049c38
Merge pull request #7122 from jepler/picow-ssl-server
...
pico w: implement sslsocket bind, listen, accept
2022-10-28 09:33:21 -04:00
b815a4cc5e
Added safe mode button and fix coyright attribution
2022-10-28 12:06:11 +00:00
27142d090b
Fixed copyright attribution
2022-10-28 11:08:30 +00:00
9a09c62eee
espressif add back `ESP32_CAMERA`
2022-10-28 13:55:33 +05:30
b276ed7af9
Fixed copyright attribution
2022-10-28 05:32:09 +00:00
b94447fde5
Added safe mode button
2022-10-28 05:00:54 +00:00
9307b62ad5
wip
2022-10-27 22:42:04 -04:00
8fe44a23d2
Merge pull request #7140 from dhalbert/esp32-s3-box-spiram-fix
...
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 16:09:59 -04:00
26688fa826
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 14:45:29 -04:00
baa44a2dba
Merge pull request #7133 from CDarius/fix_m5stack_core_basic
...
Fixed wrong configuration in sdkconfig
2022-10-27 18:34:07 +05:30
d774f3d34f
Update board.c
...
Fix for CLI
2022-10-27 15:02:44 +02:00
0e0c106740
Add Maker badge board
2022-10-27 01:06:38 +02:00
cdbad53649
Fixed wrong configuration in sdkconfig
2022-10-26 20:06:27 +00:00
be07722bbc
Added board M5Stack Atom Lite
2022-10-26 19:57:23 +00:00
ca25016b52
Merge pull request #7119 from jepler/picow-reuseaddr
...
Enable, use SOF_REUSEADDR
2022-10-26 15:25:50 -04:00
5ebdf281cb
Merge pull request #7125 from dhalbert/esp-pin-alarm-fix
...
Fix setup of Espressif PinAlarms
2022-10-26 15:24:58 -04:00
7545e02a8e
add feather rp2040 scorpio
2022-10-26 10:05:37 -05:00
366cf4a048
Merge pull request #7113 from CDarius/m5stack_core_fire
...
Added M5Stack Core Fire board
2022-10-26 09:10:50 -05:00
0bc986ea7a
Merge pull request #7124 from piit79/frood
...
Adds support for the 42. Keebs Frood RP2040 board
2022-10-26 09:09:42 -05:00
76ed0445bb
Merge pull request #7120 from CDarius/m5stack_core_basic
...
Added M5Stack Core Basic board
2022-10-26 09:09:11 -05:00
56d8b9451f
don't wait for pulls in PinAlarm
2022-10-25 20:42:08 -04:00
e49cd00d60
fix debug UART pins on Metro ESP32-S2
2022-10-25 20:41:08 -04:00
032bf63f2d
Raise error with positive code in recv_into for espressif
2022-10-25 22:53:01 +02:00
0cf096dda1
pico w: implement sslsocket bind, listen, accept
2022-10-25 14:46:41 -05:00
f6e2369bbd
Removed not available UART in board
2022-10-25 16:53:42 +00:00
f9983ff556
Added M5Stack Core Basic board
2022-10-25 16:42:14 +00:00
f997d0053d
Enable, use SOF_REUSEADDR
...
This is the lwip no-os version of SO_REUSEADDR, which is set on all
listening sockets in the espressif port; do so here as well,
it makes running servers easier. The "address in use" error does
not occur.
2022-10-25 10:09:16 -05:00
bd7f0e23d7
Adds support for the 42. Keebs Frood RP2040 board
...
https://github.com/piit79/Frood
2022-10-25 16:40:32 +02:00
c8191e8830
Better pins definitions
2022-10-25 11:41:39 +00:00
5ea8b75e17
Add STEMMA_I2C() object to Picos for Cowbells.
2022-10-24 16:27:32 -04:00
5fa67548ea
Added missing sdkconfig file
2022-10-24 20:03:06 +00:00
39171d7626
Removed unnecessary compiler flags
2022-10-24 19:21:26 +00:00
beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
773bb99c96
Merge pull request #7099 from Neradoc/add-m5stampc3-board
...
Add M5Stack Stamp C3 Board
2022-10-23 00:05:44 +05:30
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
8f0a674a1b
coproc module enhancements
...
- add light and pretend-to-deep sleep support
- check coproc running status
2022-10-22 19:08:49 +05:30
83b54d003d
implement more checks in coproc module
...
- check memory address range
- check firmware size at an earlier stage
2022-10-22 19:05:48 +05:30
7a50beb67e
PicoW more ap work
2022-10-22 11:58:44 +03:00
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
da7edf80e0
Merge pull request #7091 from MicroDev1/corpoc
...
Add `CoprocAlarm`
2022-10-21 13:36:01 -04:00
5b2728bd65
reorganize espressif `mpconfigport.mk`
2022-10-21 17:35:59 +05:30
2285dd1838
update espressif risc-v build configuration
...
- use optimization level O2
- explicitly state risc-v arch
2022-10-21 17:11:56 +05:30
8cc536bb7f
PicoW start_ap()
2022-10-21 13:20:16 +03:00
b33a2b45dc
add coproc alarm
2022-10-20 18:38:20 +05:30
b5b649801b
Merge pull request #6902 from MicroDev1/coproc
...
Add `coproc` module
2022-10-20 12:51:59 +05:30
5232e3f6c3
add coproc module
2022-10-20 09:09:44 +05:30
7015b7396e
Merge pull request #7089 from jepler/picow-gpio-number
...
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
2022-10-19 22:42:16 -04:00
576a1ac700
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
...
You might wonder how this fixes a problem with PulseIn, when the
changes aren't to any of those files! PulseIn is implemented in terms of
StateMachine, which had some assumptions about the relation between
the index of a pin object in mcu_pin_global_dict_table and its "pin
number". This was true, until some pins were removed from the
microcontroller module on Pico W.
Closes : #7078
2022-10-19 21:09:50 -05:00
8bef4282c0
pico w: implement static configuration methods in wifi.Radio
2022-10-19 20:54:53 -05:00
31d7c91c85
Merge pull request #7059 from jepler/asyncio-tests-dogfood
...
asyncio: we should dogfood our own asyncio implementation during automated tests
2022-10-19 15:11:04 -04:00
08e1cdb282
Merge pull request #7079 from jepler/picow-2xmss
...
Pico W grab bag
2022-10-19 15:03:00 -04:00
607e917363
Merge pull request #7073 from MicroDev1/patch
...
Fix 2/4MB Partition Tables & Makefile
2022-10-17 22:29:16 -04:00
6e350a65cf
Merge pull request #7076 from bill88t/early-wifi
...
Implement async wifi connection on picow
2022-10-17 19:54:58 -05:00
3b7feccd9b
picow: Implement stop_station
...
Weirdly we have to stop the AP too (which we never started),
or cyw43_tcpip_link_status still reports that STA is connected.
As long as AP mode isn't implemented, this doesn't matter and
we can just do it.
2022-10-17 19:42:10 -05:00
57756863ef
picow: depending on memory pressure, may only be able to write 1 MSS
...
Foamyguy discovered that trying to send >2920 bytes at once consistently
failed. I further discovered that sometimes trying to send >1460 bytes
would fail too. By "fail", I mean that it would take a very long time
(around 200 * 50ms) before erroneously reporting that all bytes were
written.
In my testing, this change causes larger writes to successfully
send either 2920 or 1460 bytes (possibly after doing some 50ms waits
for a previous packet to clear).
The documentation of socket.send always stated that it COULD send fewer
bytes than requested, but adafruit_httpserver assumed that the number
of requested bytes were always sent, so after this change alone,
adafruit_httpserver will still not work properly.
Closes : #7077 (albeit fixes are needed in adafruit_httpserver too)
2022-10-17 19:42:07 -05:00
861b22730e
picow: if initial write fails, write at most 1 TCP MSS of data
2022-10-17 19:28:02 -05:00
1975742d9f
picow: fix formatting numbers in lwip debug output
2022-10-17 19:28:02 -05:00
6128f4e5af
picow: add resolution of ".local" names
2022-10-17 19:28:01 -05:00
fb91c2f436
cleanup `sdkconfig-esp32.defaults`
...
- remove log level: set by -opt or -debug sdkconfig
- remove lwip hostname: set by board specific sdkconfig
2022-10-17 22:05:20 +05:30
47c373e67e
Use `cyw43_tcpip_link_status` instead
2022-10-17 18:33:32 +03:00
bce024f59e
Implement async wifi connection on picow
2022-10-17 18:17:14 +03:00
47541afc7c
picow: ask at a lower level if the interface is up
...
Closes : #7072
```
Adafruit CircuitPython 8.0.0-beta.2-9-g5192082e64-dirty on 2022-10-17; Raspberry Pi Pico W with rp2040
>>> import wifi
>>> print(wifi.radio.ipv4_address)
None
>>> import os
>>> wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
>>> print(wifi.radio.ipv4_address)
10.0.2.94
```
2022-10-17 10:08:50 -05:00
434c6d5604
fix uf2 bootloader condition in makefile
2022-10-17 19:45:48 +05:30
5114ae7a31
fix `2MB-no-uf2` partition table
2022-10-17 19:44:08 +05:30
f86377e0f1
fix `4MB-no-uf2` partition table
2022-10-17 19:42:41 +05:30
d4b1d4d430
Fix GPIO state when initializing CYW43 pin
...
Closes : #7063
2022-10-15 13:10:22 -05:00
e7b25dbf73
improve `dualbank` errors
2022-10-15 13:20:10 +05:30
6a8bc738ec
Make it easy to test just a subset of tests
...
with e.g., 'make TEST_EXTRA="extmod/uasyncio*.py" test'
2022-10-14 17:07:27 -05:00
963a51487a
unix Makefile: easy wait to print test failures as diffs
2022-10-14 14:44:52 -05:00
0ce84b27e8
Merge pull request #7053 from CytronTechnologies/add-pin-definitions-maker-feather-aiot-s3
...
Added Pin Definitions for Cytron Maker Feather AIoT S3
2022-10-14 11:31:53 -04:00
062d63ee3a
Merge pull request #7050 from jepler/picow-wirelsess-off-in-deep-sleep
...
picow: Turn off wifi co-processor regulator when entering deep sleep
2022-10-14 08:17:16 -04:00
8caafd9079
Merge pull request #7051 from jepler/picow-hashlib
...
implement hashlib for picow
2022-10-14 08:14:41 -04:00
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
66b539d768
fix espressif log level
2022-10-14 11:33:10 +05:30
3b3fe44174
implement hashlib for picow
2022-10-13 20:42:50 -05:00
0c5fd55c16
picow: Turn off wifi co-processor regulator when entering deep sleep
...
This reduces power consumption during true deep sleep.
In my measurements with ppk2 and a program that _irrevocably_ entered
deep sleep (no time alarm or pin alarm), power usage as measured on a
ppk2 decreased from ~10mA to ~1mA.
2022-10-13 20:10:10 -05:00
bb3e04a078
Merge pull request #7048 from georgboe/fix-recvinto-errno
...
Return correct errno in raspberrypi's Socket.c
2022-10-13 18:19:02 -04:00
e768b9ebb3
Return correct errno
2022-10-13 21:00:51 +02:00
de7a9c38fc
Merge remote-tracking branch 'adafruit/main' into add-os-utime-function
2022-10-13 14:15:13 -04:00
1569c7ed33
Merge pull request #7045 from jepler/smaller-microcontroller-temperature-samd
...
samd: Size-optimize the temperature code with an 0.5 to 2.0 degree relative additional error
2022-10-13 14:02:51 -04:00
7e4b2a09eb
Merge pull request #7000 from MicroDev1/storage-extend
...
Add Storage Extension Support
2022-10-13 10:05:55 -04:00
728fea4ca4
add storage extension python api
2022-10-13 09:53:33 +05:30
f7d39ceae4
comment on the revised algorithm
2022-10-12 16:25:09 -05:00
a943167d69
samd: Reduce a further 48 bytes for non-full builds
...
Another reduction of -48 bytes can be had if the fine calculation
step is skipped. The worst difference compared to the old reference
code with my calibration values in the 0° to 60° was 2°C,
and the difference at 25°C is 1°C.
The final size decrease for non-full builds like Trinket M0 is 268
bytes.
2022-10-12 15:53:44 -05:00
b251e78ac5
samd: size-optimize microcontroller temp calc
...
Perform most arithmetic with scaled integer values.
For my calibration values
```
const uint32_t NVMCTRL_TEMP_LOG[]={0xfc05511e, 0xcc7ac0f7};
```
the maximum difference between the old and new calculation is 0.50°C.
The difference is smallest (0.13°) at 25.87°C in the old scale.
This reduces mcu_processor_get_temperature from 568 bytes to 348 bytes
(-220 bytes)
2022-10-12 15:44:14 -05:00
874ddd67bf
Pico W: ssl: factor out do_handshake
2022-10-12 11:38:30 -05:00
1641a7c002
Pico W: ssl: Correctly handle errors in send/recv
...
The prefixed versions raise Python exceptions, the un-prefixed return
negative error values. We don't want to raise an exception from here,
it leaves the SSL stack in an undefined state.
2022-10-12 11:38:30 -05:00
CDario
Dan Halbert
Dan Halbert
Jeff Epler
chukwon
RetiredWizard
Pontus Oldberg
Jay Greco
root
evildave666
Scott Shawcroft
Neradoc
root
Radomir Dopieralski
BooleanMattock
m1cha1s
Bill Sideris
foamyguy
MicroDev
Dominic Davis-Foster
dronecz
paul-1
Kyle McCreery
Matthew McGowan
Petr Sedlacek
Rose Hooper
Jozsef Kiraly
chukwon
Georg Bøe
Kattni Rembor
Neradoc
askpatrickw
Kong Wai Weng