djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
32,407 Commits 21 Branches 274 Tags 785 MiB
5869af395e
Commit Graph

114 Commits

Author SHA1 Message Date
Qyriad
3f3ec1c835 samx5x: support external clock sources 
Adds two board config define's, which can be added in a board's
mpconfigboard.h: BOARD_XOSC_FREQ_HZ, and BOARD_XOSC_IS_CRYSTAL, which
are passed to clock_init(). External clock sources are currently only
implemented for SAM_D5X_E5X series chips, so defining BOARD_XOSC_FREQ_HZ
for a SAMD21 board will emit an error.

Signed-off-by: Qyriad <qyriad@qyriad.me>
 2023-07-18 17:12:58 -06:00
hathach
fecc1bdedb
fix typos (partial) detected by codepell 2023-03-18 22:17:02 +07:00
Dan Halbert
ca292f3427 Turn off mkfs FAT32 on all SAMD21 builds; note in doc 2023-03-17 12:18:24 -04:00
Dan Halbert
6e090c96a5 squeeze some specialized builds 2022-06-10 16:24:52 -04:00
Scott Shawcroft
771b4c7464
Add two space saving knobs 
* Reduce the number of supported HID reports of IDs per descriptor.
  This saves ~200 bytes in the default HID objects.
* (Not enabled) Compute QSTR attrs on init. This trades 1k RAM for
  flash. Flash is the default (1).
 2021-08-31 13:02:34 -07:00
Scott Shawcroft
5c6e80a2bb
Shrink builds by defining advanced micropython API 
Also, ignore more pins on SAMD boards and disable EXFAT on others.
 2021-08-19 16:49:33 -07:00
Scott Shawcroft
e0ce5ff045
Fix some builds by disabling exfat 2021-08-18 08:22:29 -07:00
Radomir Dopieralski
92fa1055ef Allow changing size of the filesystem on samd21 per board 
As the CircuitPython grows, it may at some point no longer be possible
to squeeze it on some of the flash-less SAMD21 boards, so it would be
good to have the option of shrinking the filesystem size on per-board
basis. This change allows to define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE
inside the board's mpconfigborard.h file.
 2021-07-08 22:19:54 +02:00
root
bc34403d71 Removed all references to MICROCONTROLLER_VOLTAGE_DISABLE 2021-06-09 10:46:14 -05:00
root
72db13fc2d enable microcontroller.cpu.voltage on SAME54 2021-06-08 10:04:40 -05:00
Jeff Epler
d3bf1fe15d modifications by pre-commit 2021-03-15 18:11:00 -05:00
Dan Halbert
69869e1439 CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup 2021-01-24 23:10:20 -05:00
Dan Halbert
9768951a2a Disable complex arithmetic on SAMD21 builds to make space 2020-11-29 15:34:38 -05:00
Dan Halbert
72b829dff0 add binascii to most builds 2020-11-01 14:52:03 -05:00
gamblor21
0a9bcc538b Removed ordered dict for all SAMD21 2020-10-14 20:15:21 -05:00
gamblor21
4270061db4 Moved ORDEREDDICT define to central location 2020-10-13 18:52:27 -05:00
Jeff Epler
1b29ceaf1a sam e54: disable microcontroller.cpu.voltage 
This hangs, and the usual workarounds didn't work.
 2020-09-17 18:27:43 -05:00
Jerry Needell
2bdd62220e adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice 2020-07-27 21:50:36 -04:00
Radomir Dopieralski
e0733d153e SAMD: configurable brownout, separate the variables 2020-07-09 12:17:07 +02:00
Radomir Dopieralski
83a27edd20 SAMD: make the brownout detection level configurable per board 
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.

In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
 2020-07-08 19:59:53 +02:00
Jeff Epler
da733c01da atmel-samd: Add support for SAM E54 family MCUs 
This introduces the new macro SAM_D5X_E5X.  This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
 2020-06-23 10:41:48 -05:00
Scott Shawcroft
acf4b1bede
Remove reverse methods from per-board defs 2020-05-19 11:43:57 -07:00
Scott Shawcroft
6aaab005c5
Initial ESP32S2 port. 
Basic blinky works but doesn't check pins.
 2020-05-15 15:36:16 -07:00
Dan Halbert
dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
Dan Halbert
e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Dan Halbert
d628d2a261 atmel-samd working 2019-12-06 15:18:20 -05:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Dan Halbert
1505da784f wip 2019-10-28 18:15:02 -04:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Dan Halbert
fbf166af1a enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit 2019-03-20 14:36:24 -04:00
Dan Halbert
99da3b9646 Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list 2019-02-21 00:19:31 -05:00
Dan Halbert
97aeb1953b correct weak module links; samd module only in m4 ports; update libraries 2019-02-17 23:48:08 -05:00
Dan Halbert
7b3f7605b8 address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE 2019-02-15 20:32:32 -05:00
Dan Halbert
a345ef28f2 finish Makefile refactoring; nrf builds work 2019-02-15 18:55:10 -05:00
Dan Halbert
cf545cd477 WIP: fix issues with remaining atmel-samd builds 2019-02-15 09:52:45 -05:00
Dan Halbert
5154e0581e WIP: atmel-samd trinket build works 2019-02-15 00:28:20 -05:00
Scott Shawcroft
844c20106b
Turn off micropython.mem_info on SAMD to get ~1k back 2019-02-04 18:00:18 -08:00
Scott Shawcroft
601a910f4e
More improvements to Terminal: 
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
 2019-01-31 11:42:14 -08:00
Scott Shawcroft
1a1dbef992
Hook up the terminal based on the first display. 2019-01-31 11:42:14 -08:00
Scott Shawcroft
fb0970ec6e
Add terminalio 2019-01-31 11:42:13 -08:00
Scott Shawcroft
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space. 2019-01-22 18:49:37 -08:00
Scott Shawcroft
0cdbc004e6
Enable displayio on all Express boards. 2019-01-22 17:59:31 -08:00
Scott Shawcroft
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD 2019-01-22 14:02:07 -08:00
Scott Shawcroft
96e2c717fc
Fix build 2019-01-17 22:10:11 -08:00
Scott Shawcroft
6404aaf411
Fix up nrf and using board.SPI in FourWire 2019-01-17 18:19:07 -08:00
Scott Shawcroft
2d136d58bf
Fix other builds and hallowing 2019-01-17 14:45:29 -08:00
Scott Shawcroft
5277138c99
pyportal compiles and tweak blinka colors 2019-01-17 10:57:05 -08:00