Damien George
8913c04831
stmhal: Add support for USB MSC device.
...
This gives a functioning, independent MSC device.
2014-03-21 23:32:01 +00:00
Damien George
c070ff24a9
Disable some math functions until they work correctly.
2014-03-21 20:52:54 +00:00
Damien George
f78d9b1a72
stmhal: Add accelerometer driver; fix bug with LFN.
2014-03-20 23:33:30 +00:00
Damien George
494600bc99
stmhal: Add lcd.c to Makefile, and init LCD in main.
2014-03-19 13:12:30 +00:00
Damien George
e2e9011253
stmhal: Add LCD driver.
2014-03-19 13:11:59 +00:00
Damien George
b92d3e1fde
stmhal: Add fatfs support, working with flash and SD card.
2014-03-17 14:04:19 +00:00
Damien George
9e5ea4d768
stmhal: Add flash write support and flash storage driver.
2014-03-17 13:31:35 +00:00
Damien George
8a9a31e57b
stmhal: Add autoflash script, to flash a DFU device automatically.
2014-03-17 13:04:51 +00:00
Damien George
fb431bf556
stmhal: Add SD card support.
...
Just low-level read/write support. No filesystem yet.
2014-03-17 13:03:41 +00:00
Damien George
781687c772
stmhal: Remove unnecessary include.
2014-03-17 10:24:29 +00:00
Dave Hylands
9c122029ec
stmhal - Add usart support
2014-03-16 09:02:12 -07:00
Damien George
02a8543841
stmhal: Check CDC tx buffer has free space before filling with data.
2014-03-15 16:54:23 +00:00
Damien George
6c2455f481
stmhal: Put an array in ROM.
2014-03-15 14:46:35 +00:00
Damien George
fdbc22e4d2
stmhal: Disable redundant SystemCoreClockUpdate function.
2014-03-15 14:45:51 +00:00
Damien George
280e7208d8
Add vstr_ins and vstr_cut_out; improve stmhal readline.
2014-03-15 14:33:09 +00:00
Damien George
8b96af6907
stmhal: Get RTC working.
2014-03-15 12:54:48 +00:00
Damien George
07174c6fca
stmhal: Fix escape sequences in USB CDC input.
2014-03-15 12:53:51 +00:00
Damien George
e285511a23
stmhal: Get USB CDC REPL working.
...
New USB HAL is quite a bit improved over previous one. Now has better
callbacks and flow control.
REPL over USB CDC now works as before, except for soft-reset (since USB
driver uses malloc...).
2014-03-15 11:52:29 +00:00
Damien George
87e423b866
stmhal: Remove obsolete #defines from mpconfigport.h.
...
Either not needed anymore, or defined in the board/_hal_conf.h file.
2014-03-15 09:28:08 +00:00
Dave Hylands
ca5444e6cd
stmhal - add pin mapping, gpio, exti, usrsw
2014-03-14 23:41:28 -07:00
Dave Hylands
0a64c92a9c
stmhal - add led support. Add netduino_plus_2 support
...
Tweaked a couple of the USB files to compile if neither dev nor host was defined.
Tested on netduiono plus 2 and stm32f4discovery boards
2014-03-14 09:48:49 -07:00
Damien George
33bdd2119d
Merge branch 'master' of github.com:micropython/micropython
...
Conflicts:
stmhal/main.c
2014-03-14 00:33:07 +00:00
Damien George
b30c02afa0
stmhal: Get USB enumerating a CDC device.
...
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00
Dave Hylands
9db719bb57
stmhal - More systick cleanup. Fix HAL_Delay
2014-03-13 16:17:01 -07:00
Dave Hylands
ef39f2d9ca
Cleanup systick for stmhal
2014-03-13 14:40:49 -07:00
Dave Hylands
f14b92b9e1
REPl working on UART6 with STMHAL
2014-03-12 18:15:55 -07:00
Damien George
f555d5deca
stmhal: Set SysTick priority to highest level.
2014-03-12 22:08:19 +00:00
Damien George
4ef1dbcbf6
stmhal: Get SysTick and HSE working.
2014-03-12 21:59:33 +00:00
Dave Hylands
dd38d90724
Initial checkin with STM HAL
...
This compiles and links, but hasn't been tested on a board
yet and even if it was run, it doesn't currently do anything.
2014-03-11 23:55:41 -07:00
