djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stmhal - add led support. Add netduino_plus_2 support

Browse Source 
Tweaked a couple of the USB files to compile if neither dev nor host was defined.
Tested on netduiono plus 2 and stm32f4discovery boards
This commit is contained in:
Dave Hylands 2014-03-14 00:51:26 -07:00
parent 33bdd2119d
commit 0a64c92a9c
14 changed files with 435 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h
View File

@ -30,9 +30,8 @@
#define PYB_LED3 (pin_A10) // Same as Led(1)
#define PYB_LED4 (pin_C13) // Same as Led(2)
#define PYB_OTYPE (GPIO_OType_PP)
#define PYB_OTYPE (GPIO_MODE_OUTPUT_PP)
#define PYB_LED_ON(pin) (pin->gpio->BSRRL = pin->pin_mask)
#define PYB_LED_OFF(pin) (pin->gpio->BSRRH = pin->pin_mask)
#define HSE_VALUE (25000000)

394
stmhal/boards/NETDUINO_PLUS_2/stm32f4xx_hal_conf.h Normal file
View File

@ -0,0 +1,394 @@
/**
******************************************************************************
* @file stm32f4xx_hal_conf.h
* @author MCD Application Team
* @version V1.0.1
* @date 26-February-2014
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CONF_H
#define __STM32F4xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
#define STM32F405xx
#define USE_USB_FS
#define USE_USB_OTG_ID 0
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
#define HAL_CAN_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_CRYP_MODULE_ENABLED
#define HAL_DAC_MODULE_ENABLED
#define HAL_DCMI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
/* #define HAL_DMA2D_MODULE_ENABLED */
#define HAL_ETH_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_NAND_MODULE_ENABLED
#define HAL_NOR_MODULE_ENABLED
#define HAL_PCCARD_MODULE_ENABLED
#define HAL_SRAM_MODULE_ENABLED
/* #define HAL_SDRAM_MODULE_ENABLED */
#define HAL_HASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_I2S_MODULE_ENABLED
#define HAL_IWDG_MODULE_ENABLED
#define HAL_LTDC_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_RNG_MODULE_ENABLED
#define HAL_RTC_MODULE_ENABLED
/* #define HAL_SAI_MODULE_ENABLED */
#define HAL_SD_MODULE_ENABLED
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED
#define HAL_IRDA_MODULE_ENABLED
#define HAL_SMARTCARD_MODULE_ENABLED
#define HAL_WWDG_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
#define HAL_HCD_MODULE_ENABLED
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
#define USE_RTOS 0
#define PREFETCH_ENABLE 1
#define INSTRUCTION_CACHE_ENABLE 1
#define DATA_CACHE_ENABLE 1
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1 */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2
#define MAC_ADDR1 0
#define MAC_ADDR2 0
#define MAC_ADDR3 0
#define MAC_ADDR4 0
#define MAC_ADDR5 0
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848 PHY Address*/
#define DP83848_PHY_ADDRESS 0x01
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
#define PHY_READ_TO ((uint32_t)0x0000FFFF)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f4xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f4xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f4xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f4xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f4xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f4xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f4xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f4xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f4xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f4xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f4xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f4xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f4xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f4xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f4xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f4xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f4xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f4xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f4xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f4xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f4xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f4xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f4xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f4xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f4xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f4xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f4xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f4xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f4xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f4xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f4xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f4xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f4xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2
stmhal/boards/PYBOARD3/mpconfigboard.h
View File

@ -26,7 +26,7 @@
#define PYB_LED3 (pin_C4) // G1 - green
#define PYB_LED4 (pin_C5) // G2 - green
#define PYB_OTYPE (GPIO_OType_PP)
#define PYB_OTYPE (GPIO_MODE_OUTPUT_PP)
#define PYB_LED_ON(pin) (pin->gpio->BSRRH = pin->pin_mask)
#define PYB_LED_OFF(pin) (pin->gpio->BSRRL = pin->pin_mask)

2
stmhal/boards/PYBOARD4/mpconfigboard.h
View File

@ -26,7 +26,7 @@
#define PYB_LED3 (pin_A15) // yellow
#define PYB_LED4 (pin_B4) // blue
#define PYB_OTYPE (GPIO_OType_PP)
#define PYB_OTYPE (GPIO_MODE_OUTPUT_PP)
#define PYB_LED_ON(pin) (pin->gpio->BSRRL = pin->pin_mask)
#define PYB_LED_OFF(pin) (pin->gpio->BSRRH = pin->pin_mask)

2
stmhal/boards/STM32F4DISC/mpconfigboard.h
View File

@ -26,7 +26,7 @@
#define PYB_LED3 (pin_D13) // orange
#define PYB_LED4 (pin_D15) // blue
#define PYB_OTYPE (GPIO_OType_PP)
#define PYB_OTYPE (GPIO_MODE_OUTPUT_PP)
#define PYB_LED_ON(pin) (pin->gpio->BSRRL = pin->pin_mask)
#define PYB_LED_OFF(pin) (pin->gpio->BSRRH = pin->pin_mask)

1
stmhal/boards/STM32F4DISC/stm32f4xx_hal_conf.h
View File

@ -47,6 +47,7 @@
/* Exported constants --------------------------------------------------------*/
#define STM32F407xx
#define USE_USB_FS
/* ########################## Module Selection ############################## */
/**

5
stmhal/led.c
View File

@ -29,7 +29,7 @@ void led_init(void) {
/* Configure I/O speed, mode, output type and pull */
GPIO_InitStructure.Speed = GPIO_SPEED_LOW;
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStructure.Mode = PYB_OTYPE;
GPIO_InitStructure.Pull = GPIO_NOPULL;
/* Turn off LEDs and initialize */
@ -45,6 +45,7 @@ void led_state(pyb_led_t led, int state) {
return;
}
const pin_obj_t *led_pin = gLed[led - 1];
//printf("led_state(%d,%d)\n", led, state);
if (state == 0) {
// turn LED off
PYB_LED_OFF(led_pin);
@ -72,7 +73,6 @@ void led_toggle(pyb_led_t led) {
}
}
#if 0
/******************************************************************************/
/* Micro Python bindings */
@ -130,4 +130,3 @@ static mp_obj_t pyb_Led(mp_obj_t led_id) {
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_Led_obj, pyb_Led);
#endif

2
stmhal/led.h
View File

@ -20,6 +20,4 @@ void led_init(void);
void led_state(pyb_led_t led, int state);
void led_toggle(pyb_led_t led);
#if 0
MP_DECLARE_CONST_FUN_OBJ(pyb_Led_obj);
#endif

8
stmhal/main.c
View File

@ -21,7 +21,6 @@
#include "misc.h"
#include "systick.h"
#include "pendsv.h"
#include "led.h"
#include "usart.h"
#include "mpconfig.h"
#include "qstr.h"
@ -38,6 +37,7 @@
#include "gccollect.h"
#include "pyexec.h"
#include "pybmodule.h"
#include "led.h"
#include "usb.h"
#if 0
#include "ff.h"
@ -274,7 +274,8 @@ int main(void) {
#if 0
pyb_led_t led = 1;
while (1) {
for (int i = 0; i < 24; i++) {
//while (1) {
led_state(led, 1);
usart_tx_strn_cooked(pyb_usart_global_debug, "on\n", 3);
HAL_Delay(100);
@ -290,7 +291,6 @@ int main(void) {
led = (led % 4) + 1;
}
__fatal_error("done");
#endif
int first_soft_reset = true;
@ -473,7 +473,7 @@ soft_reset:
#endif
#endif
#ifdef USE_HOST_MODE
#if defined(USE_HOST_MODE)
// USB host
pyb_usb_host_init();
#elif defined(USE_DEVICE_MODE)

12
stmhal/mpconfigport.h
View File

@ -38,14 +38,14 @@ typedef const void *machine_const_ptr_t; // must be of pointer size
#define free gc_free
#define realloc gc_realloc
// board specific definitions
#include "mpconfigboard.h"
#define STM32F40_41xxx
#define USE_STDPERIPH_DRIVER
#define USE_DEVICE_MODE
//#define USE_HOST_MODE
// board specific definitions
#include "mpconfigboard.h"
#if !defined(HSE_VALUE)
#define HSE_VALUE (8000000)
#endif
#define USE_DEVICE_MODE
//#define USE_HOST_MODE

5
stmhal/pybmodule.c
View File

@ -15,6 +15,7 @@
#include "gccollect.h"
#include "systick.h"
#include "pyexec.h"
#include "led.h"
#if 0
#include "rtc.h"
#include "servo.h"
@ -23,7 +24,6 @@
#include "usrsw.h"
#include "sdcard.h"
#include "accel.h"
#include "led.h"
#include "i2c.h"
#include "usart.h"
#include "adc.h"
@ -268,8 +268,9 @@ STATIC const mp_map_elem_t pyb_module_globals_table[] = {
#endif
{ MP_OBJ_NEW_QSTR(MP_QSTR_hid), (mp_obj_t)&pyb_hid_send_report_obj },
#endif
{ MP_OBJ_NEW_QSTR(MP_QSTR_Led), (mp_obj_t)&pyb_Led_obj },
#if 0
{ MP_OBJ_NEW_QSTR(MP_QSTR_I2C), (mp_obj_t)&pyb_I2C_obj },
{ MP_OBJ_NEW_QSTR(MP_QSTR_Usart), (mp_obj_t)&pyb_Usart_obj },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ADC_all), (mp_obj_t)&pyb_ADC_all_obj },

20
stmhal/stm32f4xx_it.c
View File

@ -182,25 +182,28 @@ void SysTick_Handler(void)
* @param None
* @retval None
*/
#ifdef USE_USB_FS
void OTG_FS_IRQHandler(void)
#if defined(USE_USB_FS)
#define OTG_XX_IRQHandler OTG_FS_IRQHandler
#define OTG_XX_WKUP_IRQHandler OTG_FS_WKUP_IRQHandler
#elif defined(USE_USB_HS)
void OTG_HS_IRQHandler(void)
#define OTG_XX_IRQHandler OTG_HS_IRQHandler
#define OTG_XX_WKUP_IRQHandler OTG_HS_WKUP_IRQHandler
#endif
#if defined(OTG_XX_IRQHandler)
void OTG_XX_IRQHandler(void)
{
HAL_PCD_IRQHandler(&hpcd);
}
#endif
/**
* @brief This function handles USB OTG FS or HS Wakeup IRQ Handler.
* @param None
* @retval None
*/
#ifdef USE_USB_FS
void OTG_FS_WKUP_IRQHandler(void)
#elif defined(USE_USB_HS)
void OTG_HS_WKUP_IRQHandler(void)
#endif
#if defined(OTG_XX_WKUP_IRQHandler)
void OTG_XX_WKUP_IRQHandler(void)
{
if((&hpcd)->Init.low_power_enable)
@ -242,6 +245,7 @@ void OTG_HS_WKUP_IRQHandler(void)
#endif
}
#endif
/**
* @brief This function handles PPP interrupt request.

6
stmhal/system_stm32f4xx.c
View File

@ -267,8 +267,8 @@ void SystemCoreClockUpdate(void)
* AHB Prescaler = 1
* APB1 Prescaler = 4
* APB2 Prescaler = 2
* HSE Frequency(Hz) = 8000000
* PLL_M = 8
* HSE Frequency(Hz) = HSE_VALUE
* PLL_M = HSE_VALUE/1000000
* PLL_N = 336
* PLL_P = 2
* PLL_Q = 7
@ -296,7 +296,7 @@ void SystemClock_Config(void)
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;

6
stmhal/usbd_conf.c
View File

@ -29,6 +29,10 @@
#include "stm32f4xx_hal.h"
#include "usbd_core.h"
#if !defined(USE_USB_OTG_ID)
#define USE_USB_OTG_ID 1
#endif
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
@ -68,11 +72,13 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#if USE_USB_OTG_ID
GPIO_InitStruct.Pin = GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#endif
/* Enable USB FS Clocks */
__USB_OTG_FS_CLK_ENABLE();