Commit Graph

2891 Commits

Author SHA1 Message Date
TG-Techie
03dfd28121 trying to pull 5.0.x 2020-03-06 13:52:47 -05:00
Dan Halbert
210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Thea Flowers
409a4a9490 Disable the HID USB descriptor for Sol
It's not used and ends up being confusing for folks.
2020-03-04 23:22:46 -08:00
Scott Shawcroft
b4e1955526
Merge pull request #2583 from jepler/ulab
Add 'ulab' as an extmod; enable on nrf and most samd51 boards
2020-03-04 11:46:17 -08:00
Scott Shawcroft
4aec5d1e83
Merge pull request #2680 from hierophect/stm32-clock-hotfix
STM32: Fix restriction on GPIO clock enables for F407 Discovery board
2020-03-04 11:43:33 -08:00
Jeff Epler
da31acfcc4 Merge remote-tracking branch 'origin/master' into ulab 2020-03-03 20:13:53 -06:00
Lucian Copeland
55e13715a9 Expand GPIO clock enables for F405 and F407 2020-03-03 17:21:47 -05:00
hierophect
3178462218
Merge branch 'master' into stm32-pulseout 2020-03-03 15:03:19 -05:00
Scott Shawcroft
2fea811c30
Merge pull request #2672 from jepler/fuzz
Makefiles: add targets to build unix port, mpy-cross for fuzzing
2020-03-03 11:36:53 -08:00
Scott Shawcroft
17458ad81a
Merge pull request #2662 from jepler/issue2332
Fix unaligned disk reads properly
2020-03-03 11:27:50 -08:00
Lucian Copeland
eb71bfe9d3 Exclude SoCs without basic timers 2020-03-02 11:22:40 -05:00
Jeff Epler
74bf17bb0d Makefiles: add targets to build unix port, mpy-cross for fuzzing
This assumes you have properly install afl-fuzz with afl-clang-fast.
Tested with AFLplusplus 2.60c-75-g2c6847b.
2020-03-01 11:48:33 -06:00
Jeff Epler
dc64857a7d
Merge branch 'master' into ulab 2020-02-29 21:54:39 -06:00
Dan Halbert
8435935429 update uses of assert_pin_free; remove redundant checks 2020-02-29 15:37:32 -05:00
Lucian Copeland
611ef27ac2 stm32: Add PulseOut support
Matches the implementations of the NRF and Atmel ports. TIM7 is used as it does not have a tied pin. Contains some register micromanagement since HAL support for the TIM7 timer is limited.
2020-02-29 14:47:47 -05:00
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
arturo182
0af00cf914 Freeze adafruit_requests and adafruit_esp32spi into feather_m7_1011 2020-02-29 00:39:22 +01:00
arturo182
3f26a0b06b Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011 2020-02-29 00:26:39 +01:00
Jeff Epler
eef742bf45 oofatfs: Remove _FS_DISK_READ_ALIGNED
This workaround is no longer needed, so it can be removed.

Closes: #2332
2020-02-28 10:04:28 -06:00
Jeff Epler
1e6c08fc30 nrf: sqpi_flash: Handle unaligned reads 2020-02-28 10:03:37 -06:00
TG-Techie
527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie
6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
Jeff Epler
fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
Jeff Epler
4c710cf13b unix port: add help(), help('modules') 2020-02-27 08:31:01 -06:00
Dave Marples
09a3153bf4 Fix I2C clock divider 2020-02-27 14:08:39 +00:00
arturo182
1b33cd11fc
Merge pull request #2658 from mubes/spi_fixes
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixups
2020-02-26 16:37:05 +01:00
Dave Marples
aadb0bfc1e Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixup 2020-02-26 14:28:54 +00:00
ladyada
86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
jepler
f20255813f samd51 thing plus: new port
testing performed:
 * successfully store and retrieve a 500kB file on the flash
 * square wave output on each pin appears on o'scope
 * board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
Scott Shawcroft
28c7a1e9c3
Fix crash after empty REPL session
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
Dan Halbert
dcc8abf74e
Merge pull request #2638 from fgallaire/master
Arduino Nano 33 IoT support
2020-02-22 00:12:06 -05:00
Florent Gallaire
96db16a7a2 Last NINA pins 2020-02-22 04:30:18 +01:00
Dan Halbert
f63b2c0d0c use realloc instead 2020-02-21 17:36:15 -05:00
Dan Halbert
9cf46ec947 put neopixel_write buffer in root pointers 2020-02-21 08:44:25 -05:00
Dan Halbert
23d6a3dc1f merge from upstream 2020-02-20 22:27:16 -05:00
Florent Gallaire
39ec5d0e51 Add NINA pins 2020-02-21 01:34:52 +01:00
Dan Halbert
634d246910 relicense nrf SPI.c to MIT 2020-02-20 16:00:21 -05:00
Scott Shawcroft
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011
mimxrt10xx: Add Feather M7 1011 board config
2020-02-20 10:15:57 -08:00
arturo182
feac87901a mimxrt10xx: Enable displayio
Closes #2466
2020-02-19 22:26:00 +01:00
arturo182
aa0cf38084 mimxrt10xx: Add Feather M7 1011 board config 2020-02-19 22:08:08 +01:00
Scott Shawcroft
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485
Addition of RTS/CTS/RS485 capability
2020-02-19 10:35:57 -08:00
Florent Gallaire
fba0b302ff Add Arduino Nano 33 IoT support 2020-02-19 08:56:06 +01:00
Florent Gallaire
63bcd52a5a Add Arduino Nano 33 IoT documentation 2020-02-19 08:50:27 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master
New board: PyCubed + updates to SAM32 board
2020-02-18 22:01:41 -05:00
Dave Marples
24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Dave Marples
f0e5341b0f Addition of support for imxt1010, 1050 and 1060 families 2020-02-18 23:16:40 +00:00
Dave Marples
d388899985 Addition of RS485 support 2020-02-18 23:16:40 +00:00
Dave Marples
84ad3d8393 Addition of RTS/CTS/RS485 UART functionality 2020-02-18 23:16:40 +00:00
Max Holliday
2b79d8ffe9 adding PWM to board.c for external WDT 2020-02-18 14:16:54 -08:00
Scott Shawcroft
2063867899
Merge pull request #2618 from mubes/alignment-warning
Fix alignment warning
2020-02-18 13:54:24 -08:00
Max Holliday
93760042fa no current need for NVM 2020-02-16 11:43:19 -08:00
Dave Marples
77ad9aff3c Formatting updates 2020-02-16 00:40:04 +00:00
Dave Marples
d13f04f953 Updated formatting 2020-02-14 23:02:02 +00:00
Dan Halbert
dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
Scott Shawcroft
a0760206c6
Merge pull request #2597 from hierophect/stm32-espruino-wifi
STM32: Espruino Wifi
2020-02-13 11:17:59 -08:00
Dan Halbert
a65ca3ab19
Merge pull request #2617 from dhalbert/nrf-large-spi-transactions
use properly-sized SPI transactions
2020-02-12 23:29:29 -05:00
Dave Marples
4de2a1eb62 Fix alignment warning 2020-02-12 22:36:34 +00:00
Lucian Copeland
afc1c88046 remove bad define 2020-02-12 15:56:24 -05:00
Lucian Copeland
fd2982f5c9 revert cross-board flag strategy 2020-02-12 15:12:05 -05:00
Dan Halbert
e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Lucian Copeland
6d91ed2156 move defaults to avoid conflict 2020-02-12 14:38:27 -05:00
Lucian Copeland
b248486c3b cleanup flag changes 2020-02-12 14:32:50 -05:00
Lucian Copeland
b7bb85a4da Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi 2020-02-12 14:31:08 -05:00
Lucian Copeland
7831c475b9 change flag styling 2020-02-12 14:30:29 -05:00
Scott Shawcroft
35abc48a65
Merge pull request #2589 from hierophect/stm32-temperature-us
STM32: Core temperature and voltage
2020-02-12 10:55:00 -08:00
Scott Shawcroft
01507a91db
Merge pull request #2612 from mubes/loadable-binary
Add directly loadable binary target for imxrt family
2020-02-12 10:41:59 -08:00
hierophect
4bc093675c
Merge branch 'master' into stm32-temperature-us 2020-02-12 12:13:56 -05:00
Dave Marples
d0870ce484 Update main .bin output file to be bootable artefact 2020-02-12 09:03:11 +00:00
Dan Halbert
2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Dave Marples
f3e4fbd7ba Add directly loadable binary target 2020-02-11 23:01:08 +00:00
Scott Shawcroft
8364c60eb2
Merge pull request #2570 from hierophect/stm32-f407-disco
STM32: Add STM32F4Discovery support
2020-02-10 17:19:00 -08:00
Lucian Copeland
c4436910c3 create F407 specific files 2020-02-10 12:44:23 -05:00
Max Holliday
80ba4c8661
Merge pull request #2 from adafruit/master
merging from upstream
2020-02-10 09:41:16 -08:00
Lucian Copeland
3f700e7e68 fix missing parameter 2020-02-10 12:16:00 -05:00
Lucian Copeland
b4c60c3355 Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi 2020-02-10 11:52:32 -05:00
Lucian Copeland
baf8d9ef5f Merge remote-tracking branch 'upstream/master' into stm32-temperature-us 2020-02-10 11:45:49 -05:00
Drew Fustini
3bf4b42e2e change OH20 badge pin defs to use SWn for buttons
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
Drew Fustini
0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
Max Holliday
b91c4e66cb adding Adafruit_CircuitPython_Register to frozen + updating SAM32 2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e adding new board - PyCubed
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
2020-02-08 15:33:25 -08:00
hierophect
b93d6e861b
Merge pull request #2596 from hierophect/stm32-espruino-pico
STM32: Espruino Pico
2020-02-07 14:14:49 -05:00
Scott Shawcroft
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement
Monotonic ns improvement; time.sleep rounds to nearest msec
2020-02-07 11:03:37 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-07 12:59:30 -05:00
Dan Halbert
b245f9ca5b
Merge pull request #2591 from neubauek/master
Added CircuitBrains Basic and Deluxe Boards
2020-02-07 12:47:20 -05:00
Dan Halbert
005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert
857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Lucian Copeland
41b5f73785 revert mixed up linkers 2020-02-06 18:47:06 -05:00
Lady Ada
789e311b63 update rotation so 0 is the default, for much faster ondiskbitmaps 2020-02-06 16:28:02 -05:00
neubauek
d93d491a61 Cleaned up CircuitBrains Basic and Deluxe board definitions 2020-02-06 14:47:22 -06:00
Lucian Copeland
848577e830 Update PID 2020-02-06 12:55:36 -05:00
Lucian Copeland
aee26b1c79 Add proper PID 2020-02-06 12:25:17 -05:00
Lucian Copeland
4122f85888 Create board definitions, add to board list 2020-02-06 12:19:19 -05:00
Lucian Copeland
383854ac50 Add espruino pico to board list 2020-02-06 11:25:07 -05:00
Lucian Copeland
08cf152aa8 Document flashing process 2020-02-06 11:11:51 -05:00
Lucian Copeland
698ad745f6 Fix oscillator issue, add button and LED pins 2020-02-06 10:49:03 -05:00
Dan Halbert
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error
Add another error message to BLE
2020-02-05 23:39:17 -05:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
Scott Shawcroft
72a1bdab30
Add another error message for extended advertisements at the same
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
Lucian Copeland
cdd1622350 Fix oscillator oversight in clocks.c 2020-02-05 18:12:48 -05:00
Lucian Copeland
e28d244a0d Add espruino pico pinout 2020-02-05 18:03:54 -05:00
neubauek
f3188669e4 Added CircuitBrains Basic and Deluxe Boards 2020-02-05 14:52:47 -06:00
Lucian Copeland
788464a594 board uses VBUS 2020-02-05 15:45:27 -05:00
Lucian Copeland
cedf6489f7 Add voltage ADC, standardize mphalport 2020-02-05 12:39:12 -05:00
Dan Halbert
b6da2fa173 nrf: fix i2c frequency setting 2020-02-05 11:25:31 -05:00
Lucian Copeland
4ba050d46d Add ADC for temp sensor 2020-02-04 16:26:24 -05:00
Scott Shawcroft
65045eb3bc
Merge pull request #2568 from hierophect/stm32-loader-linkers
STM32: UF2 build option for STM32F405
2020-02-04 12:21:45 -08:00
Lucian Copeland
6f73126756 add correct PID 2020-02-04 10:46:44 -05:00
Lucian Copeland
c1fded5062 Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-02-04 10:40:19 -05:00
Lucian Copeland
3ce6fc89a4 Implement new linker for external flash only 2020-02-04 10:38:45 -05:00
Dan Halbert
a4ebd2f7c1 allow tuple or list for Palette color 2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
[adafruit/circuitpython#2578]
2020-02-03 16:46:14 -08:00
Lady Ada
5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling
64cafe82bc Adjust OHS2020 madctl for default rotation
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
Michael Welling
6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
Michael Welling
33dcdd7c03 Updates to enable working SPI TFT
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
Michael Welling
d99c2ffe4f QSPI flash fixes
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
Lady Ada
dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Lucian Copeland
fa11912b9b New configuration values 2020-01-31 17:28:42 -05:00
Lucian Copeland
61944ef08e Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-01-31 16:38:17 -05:00
Dan Halbert
8258cb851e
Merge pull request #2569 from dhalbert/nrf-increase-connections
increase max BLE connections from 2 to 5
2020-01-31 15:59:27 -05:00
Dan Halbert
4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Lucian Copeland
cabc3aa90e Merge branch 'stm32-loader-linkers' of https://github.com/hierophect/circuitpython into stm32-loader-linkers 2020-01-31 14:36:03 -05:00
Lucian Copeland
41aefc819b Fix pyboard 2020-01-31 14:35:54 -05:00
Lucian Copeland
19553b8f7c WIP 2020-01-31 14:33:10 -05:00
Lucian Copeland
c1cf80180d Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-01-31 14:10:21 -05:00
Lucian Copeland
ab031bc25f Create basic board profile 2020-01-31 14:04:54 -05:00
hierophect
f38e12f0ab
Update ports/stm32f4/boards/STM32F405_boot.ld
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-01-31 13:56:08 -05:00
Lucian Copeland
a10e5d1da2 text fixes 2020-01-31 13:17:43 -05:00
Lucian Copeland
7085d91278 dangling edit 2020-01-31 13:13:51 -05:00
Lucian Copeland
b4dcecb266 Add build option for UF2 flash offset 2020-01-31 13:12:58 -05:00
Lucian Copeland
d8016bd52b Merge branch 'master' into stm32-loader-linkers 2020-01-31 12:21:46 -05:00
Dan Halbert
3b95d7c16a add gamepad to specialty cpx builds; update frozen libs 2020-01-30 21:00:47 -05:00
Dan Halbert
b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Scott Shawcroft
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf 2020-01-30 10:59:21 -08:00
Scott Shawcroft
298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes
nrf: track vm_used_ble better
2020-01-30 10:33:19 -08:00
Dan Halbert
87f73e2729 track vm_used_ble better 2020-01-30 09:52:06 -05:00
Scott Shawcroft
5d24ade5c9
Tweak error messages to reduce code size. 2020-01-29 17:32:07 -08:00
Lucian Copeland
1a25d3ca83 fix merge issue 2020-01-29 18:46:14 -05:00
hierophect
898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland
100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Lucian Copeland
b9bed98538 Merge stm32-meowbit 2020-01-29 16:05:19 -05:00
Lucian Copeland
8a9c3097e3 Add port-specific requested changes 2020-01-29 16:00:38 -05:00
Lucian Copeland
947c2243bd add feather bootloader settings, cleanup 2020-01-29 15:30:35 -05:00
Lucian Copeland
3c86005546 Implement requested changes 2020-01-28 17:11:25 -05:00
Lucian Copeland
ab9483b7fb Add internal display definitions, fails at startup 2020-01-28 16:00:34 -05:00
Wojtek Siudzinski
df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Scott Shawcroft
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma
samd: When possible, use one DMA channel for stereo AudioOut
2020-01-27 14:15:26 -08:00