Commit Graph

7162 Commits

Author SHA1 Message Date
microDev
f6d1caabc9
Merge pull request #5182 from tannewt/fix_imx
Check background pending before sleep
2021-08-21 08:00:10 +05:30
Jeff Epler
26d33658ea samd: diagnose out of range I2C frequency
The frequency divisor is limited to 255, which gives 48MHz/2/255 ~= 94.1kHz as
the lowest speed.

Without this change, values below this cut-off gave higher frequencies instead,
which didn't appear to have any relation to the frequency value requested.

Closes: #4883
2021-08-20 15:22:35 -05:00
Scott Shawcroft
490096a480
Turn on advanced MP api for unix build 2021-08-20 12:53:07 -07:00
Scott Shawcroft
9f051ec7bf
Fix usb calibrated SAMD21 builds 2021-08-20 12:45:59 -07:00
microDev
25437dcb33
Merge branch 'main' into atexit 2021-08-20 09:45:54 +05:30
microDev
60c0271e72
Merge pull request #5173 from jepler/issue3447
Update all implementations of spi read to honor write_value
2021-08-20 09:31:20 +05:30
microDev
7a0f8ae87f
Merge pull request #5175 from jepler/canio-timeout
canio: Run background tasks while waiting for message reception
2021-08-20 09:25:46 +05:30
Mark
f9f106b58d
Merge pull request #5123 from gamblor21/keypad_dup_pin_check
Check for duplicate pins in rows and columns
2021-08-19 22:20:04 -05:00
Scott Shawcroft
5c6e80a2bb
Shrink builds by defining advanced micropython API
Also, ignore more pins on SAMD boards and disable EXFAT on others.
2021-08-19 16:49:33 -07:00
Dan Halbert
419d374d3c
Merge pull request #5181 from kattni/macropad-speaker-enable
Add SPEAKER_ENABLE to MacroPad
2021-08-19 19:32:28 -04:00
Kattni Rembor
1185228b90 Remove SPEAKER_SHUTDOWN pin. 2021-08-19 15:18:19 -04:00
Scott Shawcroft
d2860b58b0
Check background pending before sleep
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.

Fixes #5086 and maybe others.
2021-08-19 12:18:13 -07:00
Jeff Epler
6abcac4ed6 not needed on rp2040 2021-08-19 13:56:31 -05:00
Jeff Epler
371f166de1 canio: Run background tasks while waiting for message reception
Closes: #5004
2021-08-19 13:55:30 -05:00
Jeff Epler
6ea136987e run codeformat 2021-08-19 13:54:13 -05:00
Kattni Rembor
ae923db06d Add SPEAKER_ENABLE pin to MacroPad. 2021-08-18 17:30:42 -04:00
Jeff Epler
cabe96e188 canio: Run background tasks while waiting for message reception
Closes: #5004
2021-08-18 11:39:40 -05:00
Scott Shawcroft
0390f812be
Fix RP2040 I2C instance check 2021-08-18 08:55:52 -07:00
Scott Shawcroft
e0ce5ff045
Fix some builds by disabling exfat 2021-08-18 08:22:29 -07:00
Jeff Epler
2b64318a57 Update all implementations of common_hal_busio_spi_read to honor write_value
(nrf, rp2040, and cxd56)

.. as well as a misleading comment that said that read always output
zeros.

Closes: #3447
2021-08-18 10:20:40 -05:00
gamblor21
d02a4b9f71 Removed ulab to make space in blackpill with flash board 2021-08-18 10:16:44 -05:00
Dan Halbert
5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes
Support multiple reports per device in usb_hid
2021-08-17 17:14:28 -04:00
Scott Shawcroft
2d8346d23b
Merge pull request #5163 from dhalbert/fix-MICROPY_HW-definitions
correct some status LED pin defns per #5161
2021-08-17 12:41:00 -07:00
Scott Shawcroft
a5143d284b
Merge pull request #5161 from ZodiusInfuser/patch_micropy
Removed unnecessary defines from Pimoroni board files
2021-08-17 12:40:12 -07:00
Dan Halbert
a0c340f727
Update ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
2021-08-17 11:26:43 -04:00
Dan Halbert
064e086570 correct some status LED pin defns per #5161 2021-08-17 09:33:34 -04:00
microDev
6c763762d4
restore sys.atexit() to prevent merge conflict 2021-08-17 10:13:01 +05:30
Ryan A. Pavlik
a77e269121
cp_sapling_m0_revb: board.UART not board.uart
This is the only board that didn't match the all-uppercase convention for these UART (and more generally, these bus) entries.
2021-08-16 17:07:17 -05:00
Scott Shawcroft
abe8638f41
Merge pull request #5160 from ZodiusInfuser/patch_tiny2040
Removed default UART, SPI and I2C from Tiny2040 config
2021-08-16 14:54:52 -07:00
microDev
1c4a6c3667
atexit module refinements
- add test for atexit module
- add callback to gc collection
- fix callback memory allocation
- execute callback on both code and repl exit
2021-08-16 21:37:32 +05:30
ZodiusInfuser
2255ab1486 Removed unnecessary Micropy and Ignore defines 2021-08-16 16:40:12 +01:00
ZodiusInfuser
5fb507c3ff Removed default UART SPI and I2C from Tiny2040 config 2021-08-16 16:31:31 +01:00
Seth Kerr
201883dcc1 removed bread 2040 from commit 2021-08-15 14:02:43 -06:00
Seth Kerr
3b491ac0f3 ran pre-commit locally 2021-08-15 14:02:43 -06:00
Seth Kerr
2ebeeb5daf add ODT PixelWing ESP32S2 2021-08-15 14:02:43 -06:00
codetyphon
fd8fe6f013
Update ports/esp32s2/boards/ai_thinker_esp_12k_nodemcu/mpconfigboard.h
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-08-15 20:39:53 +08:00
codetyphon
7a48fc05b4 fix ai-tinker-esp-12k path 2021-08-15 13:29:42 +08:00
codetyphon
e29346b79a ai_thinker_esp_12k_nodemcu 2021-08-15 10:18:40 +08:00
Dan Halbert
f37e1d7bf5 squeeze a couple of boards 2021-08-14 17:36:05 -04:00
codetyphon
8945d17aa2
Update mpconfigboard.mk 2021-08-14 23:32:40 +08:00
codetyphon
c577d3b6a4
add ai_thinker_esp_12k 2021-08-14 20:29:33 +08:00
codetyphon
221d66c603
Create board.c 2021-08-14 20:27:51 +08:00
Scott Shawcroft
3ffab36cdc
Merge remote-tracking branch 'adafruit/main' into fix_samd_timer_leak 2021-08-13 15:20:25 -07:00
Dan Halbert
ffb9ecfeca
Merge pull request #5139 from tannewt/onewireio
Move OneWire to `onewireio`
2021-08-13 18:10:04 -04:00
Scott Shawcroft
d528386d4e
Merge pull request #5143 from tylercrumpton/add-crumps2
Add CrumpS2 ESP32-S2 board
2021-08-13 12:03:42 -07:00
Scott Shawcroft
de796e2304
Move OneWire to onewireio from busio
This will allow finer grained inclusion in 8.0.0

Fixes #5135
2021-08-12 10:47:14 -07:00
Scott Shawcroft
d294692c4e
Merge pull request #5100 from tannewt/fix_cp_irremote
Switch SAMD21 ticks to PER event
2021-08-12 09:52:29 -07:00
Dan Halbert
6c1dbea8b0
Merge pull request #5129 from skieast/add-morphesp240
Add morphesp240
2021-08-12 12:27:51 -04:00
Scott Shawcroft
9c77d2653f
Merge pull request #5099 from ZodiusInfuser/main
Added definitions for some upcoming Pimoroni LED driver boards
2021-08-12 09:27:21 -07:00
ZodiusInfuser
47c8ff0570 Removed unnecessary defines 2021-08-11 23:34:20 +01:00
Scott Shawcroft
fb6b438580
Make getpass and traceback full build only
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.

Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
Scott Shawcroft
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote 2021-08-11 13:43:59 -07:00
Bruce Segal
f35afa8239 Formatting and build.yml 2021-08-11 13:43:08 -07:00
Bruce Segal
4be64cd8a9 Initial MorphESP-240 support 2021-08-11 13:11:17 -07:00
Scott Shawcroft
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
2021-08-11 12:19:16 -07:00
Scott Shawcroft
7f016ae11e
Fix build with filter to do OR 2021-08-11 12:10:51 -07:00
Scott Shawcroft
083960ce90
Fix SAMD51 builds and Prox Trinkey
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
Scott Shawcroft
ebf0901558
Merge pull request #5079 from dhalbert/debug-audio
Fix various RP2040 and SAMD audio issues
2021-08-11 11:19:53 -07:00
Scott Shawcroft
b56455ffbb
Allow sleep while paused 2021-08-11 10:48:39 -07:00
Scott Shawcroft
67c6932ca2
Reset timers separate from pwmio
This prevents timer leakage on builds without pwmio.

Fixes #5057
2021-08-11 09:58:31 -07:00
Dan Halbert
4608877c12 address review comments 2021-08-11 12:10:49 -04:00
Dan Halbert
35aac3d26b display SPI now 10MHz; set PWM duty cycle to zero at stop to quiet output 2021-08-11 10:48:53 -04:00
Dan Halbert
24e61a7da8 Track more carefully which audio buffers to fill, based on interrupt channels 2021-08-10 22:00:09 -04:00
Jeff Epler
1e53cf40ad
Merge pull request #5114 from jpconstantineau/board-bluemicro840
Add Board bluemicro840
2021-08-10 19:17:05 -05:00
Scott Shawcroft
f0859ac954
Switch SAMD21 ticks to PER event
The EVSYS is used to generate an interrupt from the event. This
simplifies timing used in pulseio that conflicted with the
auto-reload countdown.

Fixes #3890
2021-08-10 15:23:45 -07:00
ZodiusInfuser
e587bd7dc0 Added final USB PIDs 2021-08-10 11:17:06 +01:00
Chris Wilson
c0902dade6 stm/boards: Add support for SparkFun STM32 MicroMod Processor board. 2021-08-09 23:11:13 -07:00
Chris Wilson
e741330ca8 Consistent pin naming for SparkFun MicroMod processor boards. 2021-08-09 23:10:52 -07:00
Pierre Constantineau
aec965e6d9 changed PID as suggested by Scott 2021-08-09 15:25:06 -06:00
microDev
93c9d59960
Merge branch 'main' into getpass 2021-08-10 01:00:10 +05:30
microDev
052c53efc3
Merge pull request #5116 from eddieespinal/atmegazero_esp32s2
Fixes the MOSI and MISO pins mapping
2021-08-09 22:45:41 +05:30
Eddie Espinal
6764af182a Fixes the MOSI and MISO pins. By mistake I added them backward in this mapping 2021-08-09 11:31:20 -04:00
Dan Halbert
2451c788f4 valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad 2021-08-09 09:47:13 -04:00
Dan Halbert
59b89fdc5c Fix various audio DMA issues:
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`

RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
2021-08-09 09:47:13 -04:00
Dan Halbert
2cd80d1074 wip, with debugging printf's 2021-08-09 09:47:13 -04:00
Dan Halbert
fd71d924d2 partial buffer mgmt fix 2021-08-09 09:47:13 -04:00
microDev
51f8603783
add getpass module 2021-08-09 17:50:28 +05:30
Pierre
7d02fd42f8 removed trailing spaces at end of pins.c 2021-08-08 21:56:24 -06:00
Pierre
1a7cad6562 removed trailing spaces in pins.c 2021-08-08 21:43:03 -06:00
Pierre
b1d5b50551 fromatting updates to pins.c 2021-08-08 21:38:23 -06:00
Nathan Young
579194a543 Colocated board.LED and D13 together (GCM4) 2021-08-09 05:35:38 +02:00
Pierre
9de8045dca foromatting updates to pins.c 2021-08-08 21:31:07 -06:00
Pierre
45d4058981 adding initial files for BlueMicro840 Board 2021-08-08 21:25:54 -06:00
Nathan Young
a15ac65fa0 Add board.LED for Grand Central M4 Express
Fixes #5111
2021-08-08 21:43:12 +02:00
microDev
063e3946d6
Merge pull request #5094 from jepler/quirc
Add qrio: Decode QR codes with quirc lib
2021-08-07 09:30:20 +05:30
Scott Shawcroft
be2342f32f
Merge pull request #5072 from microDev1/traceback
Add traceback module
2021-08-06 12:10:17 -07:00
Scott Shawcroft
93aa4e9e47
Merge pull request #5102 from evildave666/blackpill-add-mfg-name
Add WeAct manufacturer for STM32F411 blackpill boards
2021-08-06 11:59:24 -07:00
evildave666
4d14bcf2a2 Add WeAct manufacturer for black pill boards 2021-08-06 16:06:16 +09:00
Scott Shawcroft
00b617c9c4
Merge pull request #5097 from anecdata/cucumber
Add Gravitech Cucumber M, MS, R, and RS boards
2021-08-05 11:49:51 -07:00
Jeff Epler
f0e489f51f
Merge pull request #5098 from bd34n/bdmicro_vina_d51_flash_chip
board bdmicro_vina_d51: Add support for MX25L12833F flash chip.
2021-08-05 13:48:29 -05:00
Scott Shawcroft
e3fa6e2c35
Merge pull request #5089 from tannewt/disable_ble_workflow
Add ability to disable BLE workflow
2021-08-05 11:21:17 -07:00
Jeff Epler
2e8eb43dcc Use new quirc define for small stacks
.. and revert stack enlargement of esp32-s2
2021-08-05 12:52:43 -05:00
Jeff Epler
f9393c9e51 enable qrio in unix coverage build, and add a test 2021-08-05 12:24:07 -05:00
ZodiusInfuser
f707fa107a Tweaks to Interstate75 pinout 2021-08-05 15:00:47 +01:00
Brian Dean
821f3d5532 board bdmicro_vina_d51: Add support for MX25L12833F flash chip. Add QSPI activity indicator LED. Add D15-D19 as aliases for the I2S peripheral pins. 2021-08-05 09:14:51 -04:00
ZodiusInfuser
11ed759cf9 Tweaks to Plasma2040 pinout 2021-08-05 13:01:50 +01:00
anecdata
10f74618cf Cucumber M, MS, R, and RS boards 2021-08-04 19:09:43 -05:00
Jeff Epler
131dbf1e87 Remove hard-coded disable of USB_HID for kaluga devkits 2021-08-04 18:17:20 -05:00
Dan Halbert
81833035fc raytac_mdbt50q-rx 2021-08-04 15:47:19 -04:00
Jeff Epler
38f392f318 esp32s2: Increase C stack size
The QR decoder has a single item that is 8908 bytes big and placed
on the stack.  (struct datastream)

Without enlarging the stack, this will reliably crash.
2021-08-03 13:40:27 -05:00